Information About Fault Management
Fault management on RPD is required for remote monitoring, detection, diagnosis, reporting, and correcting the issues.
The Fault management module provides the following support:
RPD can send events to the CCAP core
CCAP core can get events from RPD
Send RPD events using SNMP traps
On the CCAP core, view log in to the CLI
SNMP poll events are supported
RPD Event Reporting
An RPD logs events, generates asynchronous notifications that indicate malfunction situations, and notifies the operator about important events. The RPD event reporting includes two methods of reporting.
During the initialization of RPD, CCAP core synchronizes events from the RPD.
During run-time operations, RPD notifies the CCAP Core of the events
Restrictions for Configuring RPD Events
Following restrictions are applicable:
A maximum of 1000 events are retained on Cisco cBR. The RPD retains 1000 events locally and 1000 events in pending state.