Cisco Remote PHY Device Command Reference

show if-status

To display the registered core in provision interface, use the show if-status command in privileged EXEC mode.

show if-status

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show if-status command:

R-PHY# show if-status
Registered Cores    Interface      IP                  Status   
CORE-647736382      vbh0           11.1.4.128          OK       
CORE-4063521443     vbh0           11.1.4.128          OK       
CORE-1868846209     vbh0           11.1.4.128          OK       
CORE-2017284119     vbh0           11.1.4.128          OK

show ikev2 cacerts

To display ikev2 CA certificates, use the show ikev2 cacerts command in privileged EXEC mode.

show ikev2 cacerts

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ikev2 cacerts command:

R-PHY# show ikev2 cacerts
List of X.509 CA Certificates

  subject:  "C=US, O=Cisco System, Inc., OU=Test RPD Root CA, CN=TEST RPD Root Certification Authority"
  issuer:   "C=US, O=Cisco System, Inc., OU=Test RPD Root CA, CN=TEST RPD Root Certification Authority"
  validity:  not before Nov 23 02:40:24 2018, ok
             not after  Nov 10 02:40:24 2068, ok (expires in 18081 days)
  serial:    c0:c5:ba:28:48:cc:fb:65
  flags:     CA self-signed 
  authkeyId: dd:a0:24:b6:0f:bf:2b:29:9d:e1:4e:c4:f8:e6:b1:cf:06:8c:1f:00
  subjkeyId: dd:a0:24:b6:0f:bf:2b:29:9d:e1:4e:c4:f8:e6:b1:cf:06:8c:1f:00
  pubkey:    RSA 4096 bits
  keyid:     a1:91:97:cb:23:69:33:77:0a:6e:6f:99:27:2b:8c:f7:7d:7e:53:4c
  subjkey:   dd:a0:24:b6:0f:bf:2b:29:9d:e1:4e:c4:f8:e6:b1:cf:06:8c:1f:00

show ikev2 certs

To display ikev2 certificates, use the show ikev2 certs command in privileged EXEC mode.

show ikev2 certs

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ikev2 certs command:

R-PHY# show ikev2 certs
List of X.509 End Entity Certificates:

  subject:  "C=US, O=Cisco System, Inc., CN=www.cisco.com"
  issuer:   "C=US, O=Cisco System, Inc., OU= Test RPD Servive Provider CA, CN=Test RPD Service Provider Certification Authority"
  serial:    fe:35:b2:86:f2:cc:a9:8c
  validity:  not before Nov 23 06:07:55 2018, ok
             not after  Nov 23 06:07:55 2038, ok 
  pubkey:    RSA 2048 bits
  keyid:     ea:c0:51:fb:80:05:16:1b:25:9a:4e:48:1f:f8:dc:8b:b8:61:b0:36
  subjkey:   d6:5d:24:b7:76:d6:52:cc:54:85:7e:88:8b:2e:c5:52:78:cd:41:39
  authkey:   70:09:c4:e0:97:e3:03:c2:58:a0:fa:c2:0a:d2:6c:1b:72:23:60:a4

show ikev2 configuration

To display ikev2 configuration, use the show ikev2 configuration command in privileged EXEC mode.

show ikev2 configuration

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ikev2 configuration command:

R-PHY# show ikev2 configuration
IKEv2 authentication is currently enabled, next boot is enabled!
Current stuff is ready.

show ikev2 session

To display ikev2 session, use the show ikev2 session command in privileged EXEC mode.

show ikev2 session

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ikev2 session command:

R-PHY# show ikev2 session
Local            Remote           Status           
93.3.40.84       93.3.40.129      UP               
93.3.40.84       93.3.40.1        UP

show interface info

To display RPD interfaces information, use the show interface info command in privileged EXEC mode.

show interface info

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.
Cisco 1x2 / Compact Shelf RPD Software 8.2	This command was updated to include the status of the backhaul interface.

This is a sample output of the show interface info command:

R-PHY# show interface info
eth0      Link encap:Ethernet  HWaddr 10:04:9F:B1:01:02  
          inet addr:10.1.4.99  Bcast:10.1.4.255  Mask:255.255.255.0
          inet6 addr: fe80::1204:9fff:feb1:102/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:123101 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11415 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:16738977 (15.9 MiB)  TX bytes:1449748 (1.3 MiB)
          Memory:1ae2000-1ae2fff
vbh0      Link encap:Ethernet  HWaddr 10:04:9F:B1:01:00  
          inet addr:11.1.4.128  Bcast:11.1.4.255  Mask:255.255.255.0
          inet6 addr: fe80::1204:9fff:feb1:100/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:2350  Metric:1
          RX packets:7865087 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4359922 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:605738729 (577.6 MiB)  TX bytes:448858411 (428.0 MiB)
vbh1      Link encap:Ethernet  HWaddr 10:04:9F:B1:01:01  
          inet6 addr: fe80::1204:9fff:feb1:101/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:2350  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:3564 (3.4 KiB)

This is a sample output of the show interface info command with the status of the backhaul interface:

R-PHY#show interface info 
Backhaul configured as Link Redundancy
Backhaul 0: BH-UP
Backhaul 1: BH-UP
==============================================================
vbh0      Link encap:Ethernet  HWaddr 10:04:9F:30:11:00  
          inet addr:91.7.66.206  Bcast:91.7.66.255  Mask:255.255.255.0
          inet6 addr: fe80::1204:9fff:fe30:1100/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:2350  Metric:1
          RX packets:1178879 errors:0 dropped:0 overruns:0 frame:0
          TX packets:594792 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:91654228 (87.4 MiB)  TX bytes:58392651 (55.6 MiB)

show ip arp

Displays the information on Address Resolution Protocol (ARP) Tables.

show ip arp

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 2x2 / Compact Shelf RPD Software 4.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ip arp command:

R-PHY# show ip arp
IPv4 ARP Table:
192.168.1.1 dev eth0 lladdr 04:18:d6:f1:27:2f STALE
10.0.0.10 dev br_cs lladdr 00:1e:c0:85:7c:d8 DELAY

show ip interface

Displays the information on the IP interface status and configuration.

show ip interface

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 2x2 / Compact Shelf RPD Software 4.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ip interface command:

R-PHY# show ip interface
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 70:70:8b:43:3e:ef brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.184/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
4: mbh-e1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br_cs state UNKNOWN group default qlen 1000
    link/ether 70:70:8b:43:3e:f0 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::7270:8bff:fe43:3ef0/64 scope link
       valid_lft forever preferred_lft forever
5: br_cs: <BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 70:70:8b:43:3e:f0 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.50/24 brd 10.0.0.255 scope global br_cs
       valid_lft forever preferred_lft forever
    inet6 fe80::7270:8bff:fe43:3ef0/64 scope link
       valid_lft forever preferred_lft forever

show ip route

Displays the information on the IP routing table.

show ip route

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 2x2 / Compact Shelf RPD Software 4.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ip route command:

R-PHY# show ip route
IPv4 Route Table:
default via 192.168.1.1 dev eth0  metric 100
10.0.0.0/24 dev br_cs  proto kernel  scope link  src 10.0.0.50
192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.184
 
IPv6 Route Table:
fe80::/64 dev mbh-e1  proto kernel  metric 256  pref medium
fe80::/64 dev br_cs  proto kernel  metric 256  pref medium

show ipv4 route

To display the RPD IPv4 route information, use the show ipv4 route command in privileged EXEC mode.

show ipv4 route

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ipv4 route command:

R-PHY# show ipv4 route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         11.1.4.1        0.0.0.0         UG    0      0        0 vbh0
10.0.1.0        *               255.255.255.0   U     0      0        0 eth1
10.0.2.0        *               255.255.255.0   U     0      0        0 l2tpeth0
10.0.3.0        *               255.255.255.0   U     0      0        0 l2tpeth1
10.0.4.0        *               255.255.255.0   U     0      0        0 l2tpeth2
10.0.5.0        *               255.255.255.0   U     0      0        0 l2tpeth3
10.1.4.0        *               255.255.255.0   U     0      0        0 eth0
11.1.4.0        *               255.255.255.0   U     0      0        0 vbh0
11.1.4.1        *               255.255.255.255 UH    0      0        0 vbh0
33.33.158.158   11.1.4.4        255.255.255.255 UGH   0      0        0 vbh0

show ipv6 address

To display the IPv6 address information, use the show ipv6 address command in privileged EXEC mode.

show ipv6 address

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ipv6 address command:

R-PHY# show ipv6 address
vbh0@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2350 qlen 1000
    inet6 2001:93:3:58:204:9fff:fe31:1113/64 scope global noprefixroute dynamic 
       valid_lft 2591967sec preferred_lft 604767sec
    inet6 fe80::204:9fff:fe31:1113/64 scope link 
       valid_lft forever preferred_lft forever
vbh1@eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2350 qlen 1000
    inet6 fe80::204:9fff:fe31:1114/64 scope link 
       valid_lft forever preferred_lft forever

show ipv6 route

To display the RPD IPv6 route information, use the show ipv6 route command in privileged EXEC mode.

show ipv6 route

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ipv6 route command:

R-PHY# show ipv6 route
Kernel IPv6 routing table
Destination                                 Next Hop                                Flags Metric Ref    Use Iface
::/0                                        fe80::200:ff:fe00:20c                   UG    512    0        2 vbh0    
2001:10:90:3::93/128                        2001:93:3:58::93                        UGH   1      2561823       0 vbh0    
2001:20:1:1::33/128                         fe80::200:ff:fe00:20c                   UGC   0      6        0 vbh0    
2001:93:3:55::1/128                         fe80::200:ff:fe00:20c                   UGC   0      18659       1 vbh0    
2001:93:3:58::1/128                         ::                                      UC    0      19094       2 vbh0    
2001:93:3:58::/64                           ::                                      U     256    2        1 vbh0    
fe80::/64                                   ::                                      U     256    0        0 eth1    
fe80::/64                                   ::                                      U     256    0        0 vbh1    
fe80::/64                                   ::                                      U     256    0        0 l2tpeth0
fe80::/64                                   ::                                      U     256    0        0 l2tpeth1
fe80::/64                                   ::                                      U     256    0        0 l2tpeth2
fe80::/64                                   ::                                      U     256    0        0 l2tpeth3
fe80::/64                                   ::                                      U     256    0        0 vbh0    
::1/128                                     ::                                      U     0      3        1 lo      
2001:93:3:58::/128                          ::                                      U     0      0        1 lo      
2001:93:3:58:204:9fff:fe31:1113/128         ::                                      U     0      5326281       4 lo      
fe80::/128                                  ::                                      U     0      0        1 lo      
fe80::/128                                  ::                                      U     0      0        1 lo      
fe80::/128                                  ::                                      U     0      0        1 lo      
fe80::/128                                  ::                                      U     0      0        1 lo      
fe80::/128                                  ::                                      U     0      0        1 lo      
fe80::/128                                  ::                                      U     0      0        1 lo      
fe80::204:9fff:fe31:1113/128                ::                                      U     0      11129       1 lo      
fe80::204:9fff:fe31:1114/128                ::                                      U     0      0        1 lo      
fe80::c0d:81ff:fe9e:b575/128                ::                                      U     0      0        1 lo      
fe80::38b5:74ff:fefb:f950/128               ::                                      U     0      0        1 lo      
fe80::8877:1ff:fec9:bae8/128                ::                                      U     0      0        1 lo      
fe80::a430:93ff:fe98:3b97/128               ::                                      U     0      0        1 lo      
ff02::1/128                                 ::                                      UC    0      1        0 vbh0    
ff00::/8                                    ::                                      U     256    0        0 eth1    
ff00::/8                                    ::                                      U     256    0        0 vbh1    
ff00::/8                                    ::                                      U     256    0        0 l2tpeth0
ff00::/8                                    ::                                      U     256    0        0 l2tpeth1
ff00::/8                                    ::                                      U     256    0        0 l2tpeth2
ff00::/8                                    ::                                      U     256    0        0 l2tpeth3
ff00::/8                                    ::                                      U     256    0        1 vbh0

show l2tp

To display layer 2 information, use the show l2tp command.

show l2tp {multicast | | | session}

Syntax Description


multicast	Displays IGMPv3 joint sessions.
session	Displays layer 2 VPN sessions.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 RPD Software 1.1	This command was introduced.

Usage Guidelines

None.

Example: Displays IGMPv3 Joint Sessions

This example shows how to display IGMPv3 joint sessions:

R-PHY#show l2tp multicast 
Interface  LocalIp     Grp            Src       Status  Refcnt  Last Chg             
vbh0       11.1.2.102  225.225.225.0  11.1.2.2  JOINED  17      04:52:04 2019-05-08  
vbh0       11.1.2.102  225.225.225.0  11.1.2.3  JOINED  17      04:52:00 2019-05-08

Example: Displays Layer 2 VPN Sessions

This example shows how to display layer 2 VPN sessions:

R-PHY#show l2tp session   
L2TP Tunnel Information Total tunnels 2 sessions 110
LocSessID RemSessID LocTunID  RemTunID  State Type       Last Chg
00f40100  65080020  330108da  434799a8  est   SPECMAN    04:52:00 2019-05-08
00b40101  65040024  330108da  434799a8  est   RNG_SCQ    04:51:59 2019-05-08
00f40102  65080028  330108da  434799a8  est   SPECMAN    04:51:59 2019-05-08
00b40003  6504001c  330108da  434799a8  est   RNG_SCQ    04:52:00 2019-05-08
8000a104  2000a103  330108da  434799a8  est   PSP_DEPI   04:52:01 2019-05-08

show l2tp multicast

To display IGMPv3 join sessions, use the show l2tp multicast command in privileged EXEC mode.

show l2tp multicast

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show l2tp multicast command:

R-PHY# show l2tp multicast
Interface  LocalIp     Grp            Src       Status  Refcnt  Last Chg             
vbh0       11.1.2.102  225.225.225.0  11.1.2.2  JOINED  17      04:52:04 2019-05-08  
vbh0       11.1.2.102  225.225.225.0  11.1.2.3  JOINED  17      04:52:00 2019-05-08

show l2tp session

To display layer 2 vpn sessions, use the show l2tp session command in privileged EXEC mode.

show l2tp session

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show l2tp session command:

R-PHY# show l2tp session
L2TP Tunnel Information Total tunnels 2 sessions 110
LocSessID RemSessID LocTunID  RemTunID  State Type       Last Chg
00f40100  65080020  330108da  434799a8  est   SPECMAN    04:52:00 2019-05-08
00b40101  65040024  330108da  434799a8  est   RNG_SCQ    04:51:59 2019-05-08
00f40102  65080028  330108da  434799a8  est   SPECMAN    04:51:59 2019-05-08
00b40003  6504001c  330108da  434799a8  est   RNG_SCQ    04:52:00 2019-05-08
8000a104  2000a103  330108da  434799a8  est   PSP_DEPI   04:52:01 2019-05-08
8000a105  2000a104  330108da  434799a8  est   PSP_DEPI   04:52:02 2019-05-08
8000a106  2000a105  330108da  434799a8  est   PSP_DEPI   04:52:00 2019-05-08
00f40001  65080014  330108da  434799a8  est   SPECMAN    04:52:01 2019-05-08
8000a108  2000a107  330108da  434799a8  est   PSP_DEPI   04:52:01 2019-05-08
8000a109  2000a108  330108da  434799a8  est   PSP_DEPI   04:51:59 2019-05-08
8000a10a  2000a109  330108da  434799a8  est   PSP_DEPI   04:52:03 2019-05-08
8000a10b  2000a10a  330108da  434799a8  est   PSP_DEPI   04:52:04 2019-05-08
8000a10c  2000a10b  330108da  434799a8  est   PSP_DEPI   04:52:03 2019-05-08
8000a102  2000a101  330108da  434799a8  est   PSP_DEPI   04:52:00 2019-05-08
00640100  65010020  330108da  434799a8  est   UEPI_SCQAM 04:52:00 2019-05-08
8000a10f  2000a10e  330108da  434799a8  est   PSP_DEPI   04:52:02 2019-05-08
8000a110  2000a10f  330108da  434799a8  est   PSP_DEPI   04:52:01 2019-05-08
8000a111  2000a110  330108da  434799a8  est   PSP_DEPI   04:52:01 2019-05-08
00640103  6501002c  330108da  434799a8  est   UEPI_SCQAM 04:52:01 2019-05-08
00f40103  6508002c  330108da  434799a8  est   SPECMAN    04:52:01 2019-05-08
01040000  65200004  330108da  434799a8  est   PSP_PNM    04:52:01 2019-05-08
00d40002  65000018  330108da  434799a8  est   MAP_SCQ    04:52:02 2019-05-08
00b40000  65040010  330108da  434799a8  est   RNG_SCQ    04:52:04 2019-05-08
00d40001  65000014  330108da  434799a8  est   MAP_SCQ    04:51:59 2019-05-08
00b40102  65040028  330108da  434799a8  est   RNG_SCQ    04:52:04 2019-05-08
8000a107  2000a106  330108da  434799a8  est   PSP_DEPI   04:52:03 2019-05-08
00640101  65010024  330108da  434799a8  est   UEPI_SCQAM 04:51:59 2019-05-08
01040100  65200008  330108da  434799a8  est   PSP_PNM    04:52:02 2019-05-08
00640003  6501001c  330108da  434799a8  est   UEPI_SCQAM 04:52:04 2019-05-08
8000a103  2000a102  330108da  434799a8  est   PSP_DEPI   04:52:02 2019-05-08
00f40000  65080010  330108da  434799a8  est   SPECMAN    04:52:04 2019-05-08
01040001  65201004  330108da  434799a8  est   PSP_PNM    04:52:01 2019-05-08
00f40101  65080024  330108da  434799a8  est   SPECMAN    04:52:02 2019-05-08
00840000  65020004  330108da  434799a8  est   BW_SCQAM   04:52:03 2019-05-08
00640002  65010018  330108da  434799a8  est   UEPI_SCQAM 04:52:04 2019-05-08
8000a1a0  2000a19f  330108da  434799a8  est   PSP_DEPI   04:52:04 2019-05-08
00f40002  65080018  330108da  434799a8  est   SPECMAN    04:52:00 2019-05-08
00d40000  65000010  330108da  434799a8  est   MAP_SCQ    04:52:04 2019-05-08
00d40100  65000020  330108da  434799a8  est   MAP_SCQ    04:52:00 2019-05-08
00d40102  65000028  330108da  434799a8  est   MAP_SCQ    04:52:00 2019-05-08
00b40002  65040018  330108da  434799a8  est   RNG_SCQ    04:52:00 2019-05-08
00b40100  65040020  330108da  434799a8  est   RNG_SCQ    04:52:04 2019-05-08
8000a10d  2000a10c  330108da  434799a8  est   PSP_DEPI   04:52:03 2019-05-08
00640001  65010014  330108da  434799a8  est   UEPI_SCQAM 04:52:01 2019-05-08
8000a10e  2000a10d  330108da  434799a8  est   PSP_DEPI   04:52:04 2019-05-08
01040101  65201008  330108da  434799a8  est   PSP_PNM    04:51:59 2019-05-08
00d40003  6500001c  330108da  434799a8  est   MAP_SCQ    04:52:03 2019-05-08
00f40003  6508001c  330108da  434799a8  est   SPECMAN    04:52:03 2019-05-08
00b40103  6504002c  330108da  434799a8  est   RNG_SCQ    04:52:03 2019-05-08
00640000  65010010  330108da  434799a8  est   UEPI_SCQAM 04:52:03 2019-05-08
00d40103  6500002c  330108da  434799a8  est   MAP_SCQ    04:52:01 2019-05-08
00840100  65020008  330108da  434799a8  est   BW_SCQAM   04:52:01 2019-05-08
00b40001  65040014  330108da  434799a8  est   RNG_SCQ    04:52:01 2019-05-08
00640102  65010028  330108da  434799a8  est   UEPI_SCQAM 04:52:02 2019-05-08
00d40101  65000024  330108da  434799a8  est   MAP_SCQ    04:52:02 2019-05-08
01040000  45200004  1eecd1b1  5850f35b  est   PSP_PNM    04:51:54 2019-05-08
00b40101  45040024  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:53 2019-05-08
00f40002  45080018  1eecd1b1  5850f35b  est   SPECMAN    04:51:54 2019-05-08
00d40003  4500001c  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:54 2019-05-08
8000a104  0000a103  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:53 2019-05-08
8000a105  0000a104  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:55 2019-05-08
00b40000  45040010  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:54 2019-05-08
01040001  45201004  1eecd1b1  5850f35b  est   PSP_PNM    04:51:54 2019-05-08
8000a108  0000a107  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:55 2019-05-08
00640103  4501002c  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:55 2019-05-08
8000a10a  0000a109  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:55 2019-05-08
8000a10b  0000a10a  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:54 2019-05-08
8000a10c  0000a10b  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:54 2019-05-08
00d40102  45000028  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:54 2019-05-08
01040100  45200008  1eecd1b1  5850f35b  est   PSP_PNM    04:51:54 2019-05-08
8000a10f  0000a10e  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:54 2019-05-08
8000a110  0000a10f  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:58 2019-05-08
8000a111  0000a110  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:54 2019-05-08
00640003  4501001c  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:53 2019-05-08
00b40103  4504002c  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:55 2019-05-08
00640101  45010024  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:59 2019-05-08
8000a102  0000a101  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:54 2019-05-08
00840000  45020004  1eecd1b1  5850f35b  est   BW_SCQAM   04:51:55 2019-05-08
00d40002  45000018  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:59 2019-05-08
00640001  45010014  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:54 2019-05-08
8000a106  0000a105  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:58 2019-05-08
00b40102  45040028  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:55 2019-05-08
8000a107  0000a106  1eecd1b1  5850f35b  est   PSP_DEPI   04:52:00 2019-05-08
00640100  45010020  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:55 2019-05-08
8000a103  0000a102  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:59 2019-05-08
00d40001  45000014  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:57 2019-05-08
00f40000  45080010  1eecd1b1  5850f35b  est   SPECMAN    04:52:00 2019-05-08
00f40001  45080014  1eecd1b1  5850f35b  est   SPECMAN    04:51:55 2019-05-08
8000a109  0000a108  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:59 2019-05-08
00d40100  45000020  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:58 2019-05-08
8000a1a0  0000a19f  1eecd1b1  5850f35b  est   PSP_DEPI   04:52:00 2019-05-08
00b40002  45040018  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:54 2019-05-08
00d40000  45000010  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:55 2019-05-08
00b40100  45040020  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:54 2019-05-08
00640102  45010028  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:54 2019-05-08
00640002  45010018  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:55 2019-05-08
00f40100  45080020  1eecd1b1  5850f35b  est   SPECMAN    04:51:54 2019-05-08
8000a10d  0000a10c  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:55 2019-05-08
8000a10e  0000a10d  1eecd1b1  5850f35b  est   PSP_DEPI   04:51:54 2019-05-08
00d40103  4500002c  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:55 2019-05-08
01040101  45201008  1eecd1b1  5850f35b  est   PSP_PNM    04:51:59 2019-05-08
00f40101  45080024  1eecd1b1  5850f35b  est   SPECMAN    04:51:55 2019-05-08
00b40003  4504001c  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:55 2019-05-08
00f40003  4508001c  1eecd1b1  5850f35b  est   SPECMAN    04:52:00 2019-05-08
00640000  45010010  1eecd1b1  5850f35b  est   UEPI_SCQAM 04:51:58 2019-05-08
00f40103  4508002c  1eecd1b1  5850f35b  est   SPECMAN    04:51:54 2019-05-08
00840100  45020008  1eecd1b1  5850f35b  est   BW_SCQAM   04:51:58 2019-05-08
00b40001  45040014  1eecd1b1  5850f35b  est   RNG_SCQ    04:51:55 2019-05-08
00f40102  45080028  1eecd1b1  5850f35b  est   SPECMAN    04:51:55 2019-05-08
00d40101  45000024  1eecd1b1  5850f35b  est   MAP_SCQ    04:51:57 2019-05-08

show l2tp tunnel

To display layer 2 vpn tunnel, use the show l2tp tunnel command in privileged EXEC mode.

show l2tp tunnel

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show l2tp tunnel command:

R-PHY# show l2tp tunnel
L2TP Tunnel Information Total tunnels 2 sessions 110
LocTunID  RemTunID  Remote Name      State  Remote Address  Local Address  Sessn Count  
330108da  434799a8  clab-cbr-S11K05  est    11.1.2.2        11.1.2.102     55           
1eecd1b1  5850f35b  clab-cbr-S11K05  est    11.1.2.3        11.1.2.102     55

show lldp neighbors

To display neighbor device found by LLDP, use the show lldp neighbors command in privileged EXEC mode.

show lldp neighbors

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show lldp neighbors command:

R-PHY# show lldp neighbors
-------------------------------------------------------------------------------
LLDP neighbors:
-------------------------------------------------------------------------------
Interface:    vbh0, via: LLDP, RID: 1, Time: 2 days, 00:04:10
  Chassis:     
    ChassisID:    mac 00:de:fb:69:20:c0
    SysName:      Cloud-Leaf-B
    SysDescr:     Cisco NX-OS(tm) n6000, Software (n6000-uk9), Version 7.3(3)N1(1), Interim version 7.3(3)N1(0.535), RELEASE SOFTWARE Copyright (c) 2002-2012, 2016-2017 by Cisco Systems, Inc. Compiled 11/18/2017 2:00:00
    MgmtIP:       10.74.54.172
    Capability:   Bridge, on
  Port:        
    PortID:       local Eth1/25
    PortDescr:    Ethernet1/25
  UnknownTLVs: 
    TLV:          OUI: 00,01,42, SubType: 1, Len: 1 01
    TLV:          OUI: 00,01,42, SubType: 2, Len: 16 24,00,24,00,24,00,24,00,24,00,24,00,24,00,24,00
    TLV:          OUI: 00,01,42, SubType: 6, Len: 4 06,00,00,00
-------------------------------------------------------------------------------

show lldp statistics

To display packets statistics for LLDP, use the show lldp statistics command in privileged EXEC mode.

show lldp statistics

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show lldp statistics command:

R-PHY# show lldp statistics
-------------------------------------------------------------------------------
LLDP statistics:
-------------------------------------------------------------------------------
Interface:    vbh0
  Transmitted:  5767
  Received:     5775
  Discarded:    6
  Unrecognized: 4
  Ageout:       0
  Inserted:     1
  Deleted:      0
-------------------------------------------------------------------------------

show logging

To display system log, use the show logging command in privileged EXEC mode.

show logging ikev2 | resetlog | secure-resetlog | seres | ds-ofdm | traceback | openrpd { all | info | error } | onboard { current | message | startup_time | temperature | voltage } | last | lines

Syntax Description


ikev2	Displays the ikev2 logs.
resetlog	Displays the reset reason log.
secure-resetlog	Displays the secure factory reset reason log.
seres	Displays the seres log or the contents of seres/bcm316x log since last 'clear'.
ds-ofdm	Displays downstream OFDM logs, including detailed information about processing and error handling of DS OFDM OCD and DPD messages. This command also displays the `/tmp/d31_ocd.log` file contents.
traceback	Displays the traceback log, or kernel traceback log since last 'clear'.
openrpd all	Displays the openrpd log, or displays all contents of openrpd log since last 'clear'.
openrpd info	Displays only info or error mesages from the openrpd log, or displays 'info' contents of openrpd log since last 'clear'.
openrpd error	Displays only error mesages from the openrpd log or displays 'error' contents of openrpd log since last 'clear'.
\| last `lines`	Dsplays the `lines` number of lines from the tail of the log. Displays the whole output, if `lines` is greater than the size of the output.

The following syntax options apply for the show logging onboard command option.


current	Clears current data.
message	Clears OBFL error messages.
startup_time	Clears the startup time data.
temperature	Clears temperature data.
voltage	Clears voltage data.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.
Cisco 1x2 / Compact Shelf RPD Software 8.2	The ds-ofdm option was introduced for this command.
Cisco 1x2 / Compact Shelf RPD Software 8.4	The last filter was introduced for this command.

Usage Guidelines

All show logging commands that have corresponding clear logging commands display only the content that is logged since the last clear logging command.

Example

The following is a sample output of the show logging ikev2 command. It displays contents of IKEv2 log since last 'clear:

R-PHY# show logging ikev2
Jul 25 13:33:36 00[DMN] Starting IKE charon daemon (strongSwan 5.7.2, Linux 4.1.8-rt8, aarch64)
Jul 25 13:33:36 00[CFG] loading ca certificates from '/etc/ipsec.d/cacerts'
Jul 25 13:33:36 00[CFG]   loaded ca certificate "C=US, O=Cisco System, Inc., OU=Test RPD Root CA, CN=TEST RPD Root Certification Authority" from '/etc/ipsec.d/cacerts/TEST_RPD_ROOT_CA_PEM.CRT'
Jul 25 13:33:36 00[CFG] loading aa certificates from '/etc/ipsec.d/aacerts'
Jul 25 13:33:36 00[CFG] loading ocsp signer certificates from '/etc/ipsec.d/ocspcerts'
 --More--

Example

The following is a sample output of the show logging resetlog command. It displays the contents of reset reason log:

R-PHY# show logging resetlog
Wed May  9 22:45:56 UTC 2018:manager_main sig:143

image: 0x0001 rstreason: 0x4BFA uboot: 0x0001
----------Wed May  9 22:46:23 UTC 2018-----------
Wed May  9 22:50:51 2018: Core(vbh0, None, , ) Core_id CORE-1882455092 init(dhcp) fail
 --More--

Example

The following is a sample output of the show logging secure-resetlog command. It displays the contents of reset reason log:

R-PHY# show logging resetlog
Secure factory reset on RPD10049fb11300
       - MMC Data Sanitization at /dev/mmcblk0
         START : Mon Aug 28 18:45:21 UTC 2023
           END : Mon Aug 28 20:40:23 UTC 2023
        STATUS : Success

10.7 feature support for TLV67 and TLV69

Example

The following is a sample output of the show logging seres command. It displays contents of seres/bcm316x log since last 'clear'.

R-PHY# show logging seres
<134>2019-07-25T13:34:30.696602+00:00 RPDBADBAD13AC3E INFO  bcm316x_base_init: appId 1, /usr/bin/316x_init, PID 3619, TID 3057463296
<134>2019-07-25T13:34:30.713894+00:00 RPDBADBAD13AC3E INFO  bcm316x_init_data_structure: /usr/bin/316x_init, PID 3619, TID 3057463296
<134>2019-07-25T13:34:30.714330+00:00 RPDBADBAD13AC3E INFO  PID: 0x3161011
<134>2019-07-25T13:34:30.717423+00:00 RPDBADBAD13AC3E INFO  [bcm316x_ofdma_init_sid_cached_table]pid: 3619, tid: 0xe23.
<134>2019-07-25T13:34:30.717827+00:00 RPDBADBAD13AC3E INFO  bcm316x_LoadFirmwareIntoRam, prod ID 0x3161011
 --More--

Example

The following is a sample output of the show logging openrpd all command:

R-PHY# show logging openrpd all
<190>2019-07-26T08:24:27.569279+00:00 RPDBADBAD13AC3E INFO  OOB 55D1 Demod
<190>2019-07-26T08:24:27.569568+00:00 RPDBADBAD13AC3E INFO  OOB created BPF socket:4
<190>2019-07-26T08:24:27.569619+00:00 RPDBADBAD13AC3E INFO  OOB 55d1 Log Level Set = [LOG_WARNING]
<190>2019-07-26T08:25:17.622493+00:00 RPDBADBAD13AC3E INFO  Set L2SW multicast linklocal mac
<190>2019-07-26T08:25:17.622630+00:00 RPDBADBAD13AC3E INFO  rpd_bcm3160 setif -t VBH0_SLL 33:33:ff:13:ac:3e
 --More--

Example

The following is a sample output of the show logging openrpd info command. It displays the openrpd system log:

R-PHY# show logging openrpd info<190>2019-07-26T08:24:27.569279+00:00 RPDBADBAD13AC3E INFO  OOB 55D1 Demod
<190>2019-07-26T08:24:27.569568+00:00 RPDBADBAD13AC3E INFO  OOB created BPF socket:4
<190>2019-07-26T08:24:27.569619+00:00 RPDBADBAD13AC3E INFO  OOB 55d1 Log Level Set = [LOG_WARNING]
<190>2019-07-26T08:25:17.622493+00:00 RPDBADBAD13AC3E INFO  Set L2SW multicast linklocal mac
<190>2019-07-26T08:25:17.622630+00:00 RPDBADBAD13AC3E INFO  rpd_bcm3160 setif -t VBH0_SLL 33:33:ff:13:ac:3e
 --More--

Example

The following is a sample output of the show logging openrpd error command:

R-PHY# show logging openrpd error
<187>2019-07-26T08:25:46.356233+00:00 RPDBADBAD13AC3E ERR  parent cmd has not added:debug
<187>2019-07-26T08:25:46.358167+00:00 RPDBADBAD13AC3E ERR  parent cmd has not added:debug
<187>2019-07-26T08:25:46.359774+00:00 RPDBADBAD13AC3E ERR  parent cmd has not added:debug
<187>2019-07-26T08:25:46.361316+00:00 RPDBADBAD13AC3E ERR  parent cmd has not added:debug
<187>2019-07-26T08:25:46.403186+00:00 RPDBADBAD13AC3E ERR  0x80090807:ERROR PLEASE CHANGE RPD SSH PASSWORD IMMEDIATELY - default login credentials detected in use
 --More--

Example

The following is a sample output of the show logging onboard current command. It displays the onboard information:

R-PHY# show logging onboard current
Current: VP1P0_FP       34        2.312500     Amp     2019-05-08 00:12:18
Current: VP1P0          35        4.250000     Amp     2019-05-08 00:19:59
Current: VP1P0          35        4.125000     Amp     2019-05-08 00:21:31
Current: VP1P0_FP       34        2.250000     Amp     2019-05-08 00:32:11
Current: VP1P0          35        4.062500     Amp     2019-05-08 00:32:13

Example

The following is a sample output of the show logging onboard message command:

R-PHY# show logging onboard message
2017-03-17 07:29:49     RPD_EMD        4            TOD sync failed, start writing oblf log!
2017-03-29 15:41:30     RPD_EMD        4            RF DS, Location: RPD-Node, State: MAJOR-HIGH, Reading: 90 Celsius
2017-03-29 15:41:36     RPD_EMD        4            VCXO, Location: RPD-Node, State: MAJOR-HIGH, Reading: 90 Celsius

Example

The following is a sample output of the show logging onboard startup_time command:

R-PHY# show logging onboard startup_time
2019-05-06 05:31:51
2019-05-06 05:36:53
2019-05-08 04:41:33

Example

The following is a sample output of the show logging onboard voltage command:

R-PHY# show logging onboard voltage
Volt: VP3P3_VG       10        3.290505     Volt     2019-03-18 04:16:04
Volt: VP12V          11       12.010757     Volt     2019-03-18 04:16:06
Volt: VP1P4          12        1.380577     Volt     2019-03-18 04:16:08
Volt: VP5P5          13        5.515141     Volt     2019-03-18 04:16:10

Example

The following is a sample output of the show logging onboard temperature command:

R-PHY# show logging onboard temperature
Temp: Inlet_Air      4        21.000000     Celsius     2018-09-17 20:29:52
Temp: CPU            5        38.000000     Celsius     2018-09-17 20:29:54
Temp: FPGA           1        35.000000     Celsius     2018-09-17 20:54:21
Temp: BCM3161        2        43.000000     Celsius     2018-09-17 20:54:23
Temp: RF_DS          3        48.000000     Celsius     2018-09-17 20:54:25

Example

The show logging command has a filter to show a specified number of lines from the tail of the log. The following is a sample output ofshow logging resetlog | last 10 command.

R-PHY# show logging resetlog | last 10 
[ 18.564606] 2020-08-26.053059_2567 image: 0x0004 boots remaining: 24 rstreason: Ox4BFA last seq: 146 uboot: Ox0001 wtd_timer: 19133 ms
[ 15.964440] 2020-08-26.053057 2053 ––––––––––MMC 13.398311 ~ 15.796150, WTD 16.353000––––––––––  
[ 19.581539] 2020-08-25.141009_2568 image: 0x0004 boots remaining: 24 rstreason: Ox4BFA last seq: 146 uboot: Ox0001 wtd_timer: 20150 ms 
[ 16.994306] 2020-08-25.141007 2199 ––––––––––MMC 14.417404 ~ 16.824182, WTD 17.381000––––––––––  
[ 18.582595] 2020-08-25.133313_2566 image: 0x0004 boots remaining: 24 rstreason: Ox4BFA last seq: 146 uboot: Ox0001 wtd_timer: 19121 ms 
[ 15.984075] 2020-08-25.133311 2053 ––––––––––MMC 13.419147 ~ 15.815408, WTD 16.343000––––––––––  
[ 19.598833] 2020-08-25.114444_2567 image: 0x0004 boots remaining: 24 rstreason: Ox4BFA last seq: 146 uboot: Ox0001 wtd_timer: 20140 ms 
[ 17.007406] 2020-08-25.114442 2198 ––––––––––MMC 14.446125 ~ 16.839441, WTD 17.369000––––––––––  
[ 18.640447] 2020-08-25.093648_2566 image: 0x0004 boots remaining: 24 rstreason: Ox4BFA last seq: 146 uboot: Ox0001 wtd_timer: 19149 ms 
[ 16.040255] 2020-08-25.093646 2056 ––––––––––MMC 13.469874 ~ 15.872708, WTD 16.370000––––––––––  
R-PHY#

Example

The following is a sample output of the show logging ds-ofdm command with the /tmp/d31_ocd.log file contents:

R-PHY#show logging ds-ofdm 
<22>2020-12-01T06:05:59.458484+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 0/0
<22>2020-12-01T06:05:59.458563+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.458577+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.458591+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.458619+00:00 RPDBADBAD135DCC INFO  c2 00 00 b7 45 3f 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.458645+00:00 RPDBADBAD135DCC INFO  0e ad 00 a5 00 00 03 05 31 00 9f 01 00 01 00 01 
<22>2020-12-01T06:05:59.458671+00:00 RPDBADBAD135DCC INFO  01 04 02 01 02 03 04 26 10 43 40 04 01 10 05 71 
<22>2020-12-01T06:05:59.458696+00:00 RPDBADBAD135DCC INFO  81 00 cc 01 01 01 0d 01 18 01 21 01 46 01 4f 01 
<22>2020-12-01T06:05:59.458721+00:00 RPDBADBAD135DCC INFO  5a 01 66 01 90 01 dc 02 28 02 74 02 c0 03 0c 03 
<22>2020-12-01T06:05:59.458746+00:00 RPDBADBAD135DCC INFO  58 03 a4 03 f0 04 3c 04 88 04 d4 05 20 05 6c 05 
<22>2020-12-01T06:05:59.458771+00:00 RPDBADBAD135DCC INFO  b8 06 04 06 50 06 9c 06 e8 07 34 07 80 07 cc 08 
<22>2020-12-01T06:05:59.458796+00:00 RPDBADBAD135DCC INFO  18 08 64 08 b0 08 fc 09 48 09 94 09 e0 0a 2c 0a 
<22>2020-12-01T06:05:59.458821+00:00 RPDBADBAD135DCC INFO  78 0a c4 0b 10 0b 5c 0b a8 0b f4 0c 40 0c 8c 0c 
<22>2020-12-01T06:05:59.458845+00:00 RPDBADBAD135DCC INFO  d8 0d 24 0d 70 0d bc 0e 08 0e 54 0e a0 0e ec 0f 
<22>2020-12-01T06:05:59.458870+00:00 RPDBADBAD135DCC INFO  38 05 05 10 00 00 00 a5 05 05 10 0f 5a 0f ff 05 
<22>2020-12-01T06:05:59.458899+00:00 RPDBADBAD135DCC INFO  05 14 01 30 01 37 06 01 00 
<22>2020-12-01T06:05:59.458922+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.458938+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.458951+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.458964+00:00 RPDBADBAD135DCC INFO                               Length :  183
<22>2020-12-01T06:05:59.458979+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x453f (17727)
<22>2020-12-01T06:05:59.458992+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.459008+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.459023+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.459037+00:00 RPDBADBAD135DCC INFO                               Length :  165
<22>2020-12-01T06:05:59.459051+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.459065+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.459078+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.459092+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.459154+00:00 RPDBADBAD135DCC INFO                                 Type :   49 (OCD)
<22>2020-12-01T06:05:59.459170+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.459182+00:00 RPDBADBAD135DCC INFO    OCD fields
<22>2020-12-01T06:05:59.459196+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.459209+00:00 RPDBADBAD135DCC INFO                                  CCC :    1
<22>2020-12-01T06:05:59.459227+00:00 RPDBADBAD135DCC INFO      TLV 0                   Spacing : 50 KHz
<22>2020-12-01T06:05:59.459242+00:00 RPDBADBAD135DCC INFO      TLV 1             Cyclic Prefix : 1024 samples
<22>2020-12-01T06:05:59.459256+00:00 RPDBADBAD135DCC INFO      TLV 2                   Rolloff : 128 samples
<22>2020-12-01T06:05:59.459271+00:00 RPDBADBAD135DCC INFO      TLV 3         Spectrum Location : 638600000 Hz
<22>2020-12-01T06:05:59.459286+00:00 RPDBADBAD135DCC INFO      TLV 4          Interleave Depth : 16  
<22>2020-12-01T06:05:59.459300+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : Continuous Pilots
<22>2020-12-01T06:05:59.459313+00:00 RPDBADBAD135DCC INFO        (list)
<22>2020-12-01T06:05:59.459325+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.459346+00:00 RPDBADBAD135DCC INFO        0204  0257  0269  0280  0289  0326  0335  0346  0358  0400
<22>2020-12-01T06:05:59.459367+00:00 RPDBADBAD135DCC INFO        0476  0552  0628  0704  0780  0856  0932  1008  1084  1160
<22>2020-12-01T06:05:59.459387+00:00 RPDBADBAD135DCC INFO        1236  1312  1388  1464  1540  1616  1692  1768  1844  1920
<22>2020-12-01T06:05:59.459407+00:00 RPDBADBAD135DCC INFO        1996  2072  2148  2224  2300  2376  2452  2528  2604  2680
<22>2020-12-01T06:05:59.459427+00:00 RPDBADBAD135DCC INFO        2756  2832  2908  2984  3060  3136  3212  3288  3364  3440
<22>2020-12-01T06:05:59.459444+00:00 RPDBADBAD135DCC INFO        3516  3592  3668  3744  3820  3896
<22>2020-12-01T06:05:59.459458+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : Excluded Subcarriers
<22>2020-12-01T06:05:59.459470+00:00 RPDBADBAD135DCC INFO        (range)
<22>2020-12-01T06:05:59.459484+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 0165
<22>2020-12-01T06:05:59.459498+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : Excluded Subcarriers
<22>2020-12-01T06:05:59.459509+00:00 RPDBADBAD135DCC INFO        (range)
<22>2020-12-01T06:05:59.459523+00:00 RPDBADBAD135DCC INFO                                      : 3930 - 4095
<22>2020-12-01T06:05:59.459537+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : PLC Subcarriers
<22>2020-12-01T06:05:59.459549+00:00 RPDBADBAD135DCC INFO        (range)
<22>2020-12-01T06:05:59.459563+00:00 RPDBADBAD135DCC INFO                                      : 0304 - 0311
<22>2020-12-01T06:05:59.459576+00:00 RPDBADBAD135DCC INFO      TLV 6           Primary Capable : 0 (No)
<22>2020-12-01T06:05:59.459588+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.459599+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.459611+00:00 RPDBADBAD135DCC INFO  OCD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.656591+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Ocd chan:158 dps:5 ccc:0 spacing:2 state OTHER old state UNKNOWN
<22>2020-12-01T06:05:59.660579+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 158/0
<22>2020-12-01T06:05:59.660609+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.660625+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.660639+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.660669+00:00 RPDBADBAD135DCC INFO  c2 00 00 22 61 fc 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.660695+00:00 RPDBADBAD135DCC INFO  0e ad 00 10 00 00 03 05 32 00 9f 00 02 05 05 28 
<22>2020-12-01T06:05:59.660713+00:00 RPDBADBAD135DCC INFO  00 00 0f ff 
<22>2020-12-01T06:05:59.660728+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.660746+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.660761+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.660776+00:00 RPDBADBAD135DCC INFO                               Length :   34
<22>2020-12-01T06:05:59.660791+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x61fc (25084)
<22>2020-12-01T06:05:59.660805+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.660821+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.660836+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.660850+00:00 RPDBADBAD135DCC INFO                               Length :   16
<22>2020-12-01T06:05:59.660866+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.660880+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.660893+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.660908+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.660923+00:00 RPDBADBAD135DCC INFO                                 Type :   50 (DPD)
<22>2020-12-01T06:05:59.660938+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.660951+00:00 RPDBADBAD135DCC INFO    DPD fields
<22>2020-12-01T06:05:59.660965+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.660978+00:00 RPDBADBAD135DCC INFO                           Profile ID :    0
<22>2020-12-01T06:05:59.660992+00:00 RPDBADBAD135DCC INFO                                  CCC :    2
<22>2020-12-01T06:05:59.661007+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Range/List : Range (continuous)
<22>2020-12-01T06:05:59.661021+00:00 RPDBADBAD135DCC INFO                           Modulation : 256
<22>2020-12-01T06:05:59.661034+00:00 RPDBADBAD135DCC INFO        (default value)
<22>2020-12-01T06:05:59.661049+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 4095
<22>2020-12-01T06:05:59.661063+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.661108+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.661124+00:00 RPDBADBAD135DCC INFO  DPD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.661173+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Dpd chan:158 dps:5 ccc:2 profile:0 state OTHER
<22>2020-12-01T06:05:59.666003+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 158/0
<22>2020-12-01T06:05:59.666035+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.666051+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.666066+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.666095+00:00 RPDBADBAD135DCC INFO  c2 00 00 22 61 fc 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.666122+00:00 RPDBADBAD135DCC INFO  0e ad 00 10 00 00 03 05 32 00 9f 01 02 05 05 26 
<22>2020-12-01T06:05:59.666140+00:00 RPDBADBAD135DCC INFO  00 00 0f ff 
<22>2020-12-01T06:05:59.666154+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.666170+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.666185+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.666202+00:00 RPDBADBAD135DCC INFO                               Length :   34
<22>2020-12-01T06:05:59.666217+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x61fc (25084)
<22>2020-12-01T06:05:59.666231+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.666248+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.666265+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.666280+00:00 RPDBADBAD135DCC INFO                               Length :   16
<22>2020-12-01T06:05:59.666296+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.666310+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.666324+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.666338+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.666353+00:00 RPDBADBAD135DCC INFO                                 Type :   50 (DPD)
<22>2020-12-01T06:05:59.666368+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.666381+00:00 RPDBADBAD135DCC INFO    DPD fields
<22>2020-12-01T06:05:59.666395+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.666420+00:00 RPDBADBAD135DCC INFO                           Profile ID :    1
<22>2020-12-01T06:05:59.666435+00:00 RPDBADBAD135DCC INFO                                  CCC :    2
<22>2020-12-01T06:05:59.666452+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Range/List : Range (continuous)
<22>2020-12-01T06:05:59.666466+00:00 RPDBADBAD135DCC INFO                           Modulation : 64
<22>2020-12-01T06:05:59.666480+00:00 RPDBADBAD135DCC INFO        (default value)
<22>2020-12-01T06:05:59.666496+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 4095
<22>2020-12-01T06:05:59.666509+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.666522+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.666541+00:00 RPDBADBAD135DCC INFO  DPD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.666573+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Dpd chan:158 dps:5 ccc:2 profile:1 state OTHER
<22>2020-12-01T06:05:59.671953+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 158/0
<22>2020-12-01T06:05:59.671984+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.672001+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.672018+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.672048+00:00 RPDBADBAD135DCC INFO  c2 00 00 22 61 fc 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.672074+00:00 RPDBADBAD135DCC INFO  0e ad 00 10 00 00 03 05 32 00 9f ff 02 05 05 24 
<22>2020-12-01T06:05:59.672092+00:00 RPDBADBAD135DCC INFO  00 00 0f ff 
<22>2020-12-01T06:05:59.672106+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.672122+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.672136+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.672151+00:00 RPDBADBAD135DCC INFO                               Length :   34
<22>2020-12-01T06:05:59.672166+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x61fc (25084)
<22>2020-12-01T06:05:59.672180+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.672196+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.672212+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.672226+00:00 RPDBADBAD135DCC INFO                               Length :   16
<22>2020-12-01T06:05:59.672240+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.672253+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.672267+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.672281+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.672296+00:00 RPDBADBAD135DCC INFO                                 Type :   50 (DPD)
<22>2020-12-01T06:05:59.672310+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.672323+00:00 RPDBADBAD135DCC INFO    DPD fields
<22>2020-12-01T06:05:59.672337+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.672351+00:00 RPDBADBAD135DCC INFO                           Profile ID :  255
<22>2020-12-01T06:05:59.672365+00:00 RPDBADBAD135DCC INFO                                  CCC :    2
<22>2020-12-01T06:05:59.672382+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Range/List : Range (continuous)
<22>2020-12-01T06:05:59.672395+00:00 RPDBADBAD135DCC INFO                           Modulation : 16
<22>2020-12-01T06:05:59.672408+00:00 RPDBADBAD135DCC INFO        (default value)
<22>2020-12-01T06:05:59.672423+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 4095
<22>2020-12-01T06:05:59.672436+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.672448+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.672460+00:00 RPDBADBAD135DCC INFO  DPD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.672491+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Dpd chan:158 dps:5 ccc:2 profile:255 state OTHER
<22>2020-12-01T06:05:59.677231+00:00 RPDBADBAD135DCC INFO  TLV63 ADMIN chan:158 dps:5 state:UP rf_mute:0 power_adjust:0 active = 158/0
<22>2020-12-01T06:05:59.677412+00:00 RPDBADBAD135DCC INFO  bcm316x_ds_ofdm_set_cli_cfg : channel 158 TLV63 UP RESET
<22>2020-12-01T06:05:59.677448+00:00 RPDBADBAD135DCC INFO  bcm316x_ds_set_ofdm_cfg chan:158 dps:5 admin state old OTHER new UP
<22>2020-12-01T06:05:59.677481+00:00 RPDBADBAD135DCC INFO  bcm316x_ds_set_ofdm_cfg chan:158 dps:5 up
<22>2020-12-01T06:06:00.199473+00:00 RPDBADBAD135DCC INFO  OFDM channel 158 TLV63 ret 0 active 158/0
R-PHY#        
 
 
root@RPDbadbad135dcc:/# cat  /tmp/d31_ocd.log
<22>2020-12-01T06:05:59.458484+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 0/0
<22>2020-12-01T06:05:59.458563+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.458577+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.458591+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.458619+00:00 RPDBADBAD135DCC INFO  c2 00 00 b7 45 3f 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.458645+00:00 RPDBADBAD135DCC INFO  0e ad 00 a5 00 00 03 05 31 00 9f 01 00 01 00 01 
<22>2020-12-01T06:05:59.458671+00:00 RPDBADBAD135DCC INFO  01 04 02 01 02 03 04 26 10 43 40 04 01 10 05 71 
<22>2020-12-01T06:05:59.458696+00:00 RPDBADBAD135DCC INFO  81 00 cc 01 01 01 0d 01 18 01 21 01 46 01 4f 01 
<22>2020-12-01T06:05:59.458721+00:00 RPDBADBAD135DCC INFO  5a 01 66 01 90 01 dc 02 28 02 74 02 c0 03 0c 03 
<22>2020-12-01T06:05:59.458746+00:00 RPDBADBAD135DCC INFO  58 03 a4 03 f0 04 3c 04 88 04 d4 05 20 05 6c 05 
<22>2020-12-01T06:05:59.458771+00:00 RPDBADBAD135DCC INFO  b8 06 04 06 50 06 9c 06 e8 07 34 07 80 07 cc 08 
<22>2020-12-01T06:05:59.458796+00:00 RPDBADBAD135DCC INFO  18 08 64 08 b0 08 fc 09 48 09 94 09 e0 0a 2c 0a 
<22>2020-12-01T06:05:59.458821+00:00 RPDBADBAD135DCC INFO  78 0a c4 0b 10 0b 5c 0b a8 0b f4 0c 40 0c 8c 0c 
<22>2020-12-01T06:05:59.458845+00:00 RPDBADBAD135DCC INFO  d8 0d 24 0d 70 0d bc 0e 08 0e 54 0e a0 0e ec 0f 
<22>2020-12-01T06:05:59.458870+00:00 RPDBADBAD135DCC INFO  38 05 05 10 00 00 00 a5 05 05 10 0f 5a 0f ff 05 
<22>2020-12-01T06:05:59.458899+00:00 RPDBADBAD135DCC INFO  05 14 01 30 01 37 06 01 00 
<22>2020-12-01T06:05:59.458922+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.458938+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.458951+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.458964+00:00 RPDBADBAD135DCC INFO                               Length :  183
<22>2020-12-01T06:05:59.458979+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x453f (17727)
<22>2020-12-01T06:05:59.458992+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.459008+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.459023+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.459037+00:00 RPDBADBAD135DCC INFO                               Length :  165
<22>2020-12-01T06:05:59.459051+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.459065+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.459078+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.459092+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.459154+00:00 RPDBADBAD135DCC INFO                                 Type :   49 (OCD)
<22>2020-12-01T06:05:59.459170+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.459182+00:00 RPDBADBAD135DCC INFO    OCD fields
<22>2020-12-01T06:05:59.459196+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.459209+00:00 RPDBADBAD135DCC INFO                                  CCC :    1
<22>2020-12-01T06:05:59.459227+00:00 RPDBADBAD135DCC INFO      TLV 0                   Spacing : 50 KHz
<22>2020-12-01T06:05:59.459242+00:00 RPDBADBAD135DCC INFO      TLV 1             Cyclic Prefix : 1024 samples
<22>2020-12-01T06:05:59.459256+00:00 RPDBADBAD135DCC INFO      TLV 2                   Rolloff : 128 samples
<22>2020-12-01T06:05:59.459271+00:00 RPDBADBAD135DCC INFO      TLV 3         Spectrum Location : 638600000 Hz
<22>2020-12-01T06:05:59.459286+00:00 RPDBADBAD135DCC INFO      TLV 4          Interleave Depth : 16  
<22>2020-12-01T06:05:59.459300+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : Continuous Pilots
<22>2020-12-01T06:05:59.459313+00:00 RPDBADBAD135DCC INFO        (list)
<22>2020-12-01T06:05:59.459325+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.459346+00:00 RPDBADBAD135DCC INFO        0204  0257  0269  0280  0289  0326  0335  0346  0358  0400
<22>2020-12-01T06:05:59.459367+00:00 RPDBADBAD135DCC INFO        0476  0552  0628  0704  0780  0856  0932  1008  1084  1160
<22>2020-12-01T06:05:59.459387+00:00 RPDBADBAD135DCC INFO        1236  1312  1388  1464  1540  1616  1692  1768  1844  1920
<22>2020-12-01T06:05:59.459407+00:00 RPDBADBAD135DCC INFO        1996  2072  2148  2224  2300  2376  2452  2528  2604  2680
<22>2020-12-01T06:05:59.459427+00:00 RPDBADBAD135DCC INFO        2756  2832  2908  2984  3060  3136  3212  3288  3364  3440
<22>2020-12-01T06:05:59.459444+00:00 RPDBADBAD135DCC INFO        3516  3592  3668  3744  3820  3896
<22>2020-12-01T06:05:59.459458+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : Excluded Subcarriers
<22>2020-12-01T06:05:59.459470+00:00 RPDBADBAD135DCC INFO        (range)
<22>2020-12-01T06:05:59.459484+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 0165
<22>2020-12-01T06:05:59.459498+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : Excluded Subcarriers
<22>2020-12-01T06:05:59.459509+00:00 RPDBADBAD135DCC INFO        (range)
<22>2020-12-01T06:05:59.459523+00:00 RPDBADBAD135DCC INFO                                      : 3930 - 4095
<22>2020-12-01T06:05:59.459537+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Assignment : PLC Subcarriers
<22>2020-12-01T06:05:59.459549+00:00 RPDBADBAD135DCC INFO        (range)
<22>2020-12-01T06:05:59.459563+00:00 RPDBADBAD135DCC INFO                                      : 0304 - 0311
<22>2020-12-01T06:05:59.459576+00:00 RPDBADBAD135DCC INFO      TLV 6           Primary Capable : 0 (No)
<22>2020-12-01T06:05:59.459588+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.459599+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.459611+00:00 RPDBADBAD135DCC INFO  OCD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.656591+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Ocd chan:158 dps:5 ccc:0 spacing:2 state OTHER old state UNKNOWN
<22>2020-12-01T06:05:59.660579+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 158/0
<22>2020-12-01T06:05:59.660609+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.660625+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.660639+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.660669+00:00 RPDBADBAD135DCC INFO  c2 00 00 22 61 fc 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.660695+00:00 RPDBADBAD135DCC INFO  0e ad 00 10 00 00 03 05 32 00 9f 00 02 05 05 28 
<22>2020-12-01T06:05:59.660713+00:00 RPDBADBAD135DCC INFO  00 00 0f ff 
<22>2020-12-01T06:05:59.660728+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.660746+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.660761+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.660776+00:00 RPDBADBAD135DCC INFO                               Length :   34
<22>2020-12-01T06:05:59.660791+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x61fc (25084)
<22>2020-12-01T06:05:59.660805+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.660821+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.660836+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.660850+00:00 RPDBADBAD135DCC INFO                               Length :   16
<22>2020-12-01T06:05:59.660866+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.660880+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.660893+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.660908+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.660923+00:00 RPDBADBAD135DCC INFO                                 Type :   50 (DPD)
<22>2020-12-01T06:05:59.660938+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.660951+00:00 RPDBADBAD135DCC INFO    DPD fields
<22>2020-12-01T06:05:59.660965+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.660978+00:00 RPDBADBAD135DCC INFO                           Profile ID :    0
<22>2020-12-01T06:05:59.660992+00:00 RPDBADBAD135DCC INFO                                  CCC :    2
<22>2020-12-01T06:05:59.661007+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Range/List : Range (continuous)
<22>2020-12-01T06:05:59.661021+00:00 RPDBADBAD135DCC INFO                           Modulation : 256
<22>2020-12-01T06:05:59.661034+00:00 RPDBADBAD135DCC INFO        (default value)
<22>2020-12-01T06:05:59.661049+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 4095
<22>2020-12-01T06:05:59.661063+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.661108+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.661124+00:00 RPDBADBAD135DCC INFO  DPD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.661173+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Dpd chan:158 dps:5 ccc:2 profile:0 state OTHER
<22>2020-12-01T06:05:59.666003+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 158/0
<22>2020-12-01T06:05:59.666035+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.666051+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.666066+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.666095+00:00 RPDBADBAD135DCC INFO  c2 00 00 22 61 fc 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.666122+00:00 RPDBADBAD135DCC INFO  0e ad 00 10 00 00 03 05 32 00 9f 01 02 05 05 26 
<22>2020-12-01T06:05:59.666140+00:00 RPDBADBAD135DCC INFO  00 00 0f ff 
<22>2020-12-01T06:05:59.666154+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.666170+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.666185+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.666202+00:00 RPDBADBAD135DCC INFO                               Length :   34
<22>2020-12-01T06:05:59.666217+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x61fc (25084)
<22>2020-12-01T06:05:59.666231+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.666248+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.666265+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.666280+00:00 RPDBADBAD135DCC INFO                               Length :   16
<22>2020-12-01T06:05:59.666296+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.666310+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.666324+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.666338+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.666353+00:00 RPDBADBAD135DCC INFO                                 Type :   50 (DPD)
<22>2020-12-01T06:05:59.666368+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.666381+00:00 RPDBADBAD135DCC INFO    DPD fields
<22>2020-12-01T06:05:59.666395+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.666420+00:00 RPDBADBAD135DCC INFO                           Profile ID :    1
<22>2020-12-01T06:05:59.666435+00:00 RPDBADBAD135DCC INFO                                  CCC :    2
<22>2020-12-01T06:05:59.666452+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Range/List : Range (continuous)
<22>2020-12-01T06:05:59.666466+00:00 RPDBADBAD135DCC INFO                           Modulation : 64
<22>2020-12-01T06:05:59.666480+00:00 RPDBADBAD135DCC INFO        (default value)
<22>2020-12-01T06:05:59.666496+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 4095
<22>2020-12-01T06:05:59.666509+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.666522+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.666541+00:00 RPDBADBAD135DCC INFO  DPD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.666573+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Dpd chan:158 dps:5 ccc:2 profile:1 state OTHER
<22>2020-12-01T06:05:59.671953+00:00 RPDBADBAD135DCC INFO  Receive OCD/DPD docsis msg for OFDM channel 158 (start=158, count=2, end=162) active = 158/0
<22>2020-12-01T06:05:59.671984+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.672001+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg +++
<22>2020-12-01T06:05:59.672018+00:00 RPDBADBAD135DCC INFO  OFDM Docsis Msg
<22>2020-12-01T06:05:59.672048+00:00 RPDBADBAD135DCC INFO  c2 00 00 22 61 fc 01 e0 2f 00 00 01 ba db ad 0a 
<22>2020-12-01T06:05:59.672074+00:00 RPDBADBAD135DCC INFO  0e ad 00 10 00 00 03 05 32 00 9f ff 02 05 05 24 
<22>2020-12-01T06:05:59.672092+00:00 RPDBADBAD135DCC INFO  00 00 0f ff 
<22>2020-12-01T06:05:59.672106+00:00 RPDBADBAD135DCC INFO    MAC Header
<22>2020-12-01T06:05:59.672122+00:00 RPDBADBAD135DCC INFO                        Frame Control : 0xc2  (MAC specific, MAC msg, EHDR Off)
<22>2020-12-01T06:05:59.672136+00:00 RPDBADBAD135DCC INFO                       MAC Parameters : 0x00 
<22>2020-12-01T06:05:59.672151+00:00 RPDBADBAD135DCC INFO                               Length :   34
<22>2020-12-01T06:05:59.672166+00:00 RPDBADBAD135DCC INFO                Header Check Sequence : 0x61fc (25084)
<22>2020-12-01T06:05:59.672180+00:00 RPDBADBAD135DCC INFO    MAC Management Header
<22>2020-12-01T06:05:59.672196+00:00 RPDBADBAD135DCC INFO                 Destination MAC ADDR : 01e0.2f00.0001
<22>2020-12-01T06:05:59.672212+00:00 RPDBADBAD135DCC INFO                      Source MAC ADDR : badb.ad0a.0ead
<22>2020-12-01T06:05:59.672226+00:00 RPDBADBAD135DCC INFO                               Length :   16
<22>2020-12-01T06:05:59.672240+00:00 RPDBADBAD135DCC INFO                      Destination SAP :    0
<22>2020-12-01T06:05:59.672253+00:00 RPDBADBAD135DCC INFO                           Source SAP :    0
<22>2020-12-01T06:05:59.672267+00:00 RPDBADBAD135DCC INFO                              Control :    3
<22>2020-12-01T06:05:59.672281+00:00 RPDBADBAD135DCC INFO                              Version :    5
<22>2020-12-01T06:05:59.672296+00:00 RPDBADBAD135DCC INFO                                 Type :   50 (DPD)
<22>2020-12-01T06:05:59.672310+00:00 RPDBADBAD135DCC INFO                            Multipart :    0  (Sequence number 0, Fragments 0)
<22>2020-12-01T06:05:59.672323+00:00 RPDBADBAD135DCC INFO    DPD fields
<22>2020-12-01T06:05:59.672337+00:00 RPDBADBAD135DCC INFO                                 DCID :  159
<22>2020-12-01T06:05:59.672351+00:00 RPDBADBAD135DCC INFO                           Profile ID :  255
<22>2020-12-01T06:05:59.672365+00:00 RPDBADBAD135DCC INFO                                  CCC :    2
<22>2020-12-01T06:05:59.672382+00:00 RPDBADBAD135DCC INFO      TLV 5     Subcarrier Range/List : Range (continuous)
<22>2020-12-01T06:05:59.672395+00:00 RPDBADBAD135DCC INFO                           Modulation : 16
<22>2020-12-01T06:05:59.672408+00:00 RPDBADBAD135DCC INFO        (default value)
<22>2020-12-01T06:05:59.672423+00:00 RPDBADBAD135DCC INFO                                      : 0000 - 4095
<22>2020-12-01T06:05:59.672436+00:00 RPDBADBAD135DCC INFO  +++ Validate docsis msg done +++
<22>2020-12-01T06:05:59.672448+00:00 RPDBADBAD135DCC INFO  
<22>2020-12-01T06:05:59.672460+00:00 RPDBADBAD135DCC INFO  DPD packet, chan:158 dps:5  
<22>2020-12-01T06:05:59.672491+00:00 RPDBADBAD135DCC INFO  Ofdm_Parse_Dpd chan:158 dps:5 ccc:2 profile:255 state OTHER
<22>2020-12-01T06:05:59.677231+00:00 RPDBADBAD135DCC INFO  TLV63 ADMIN chan:158 dps:5 state:UP rf_mute:0 power_adjust:0 active = 158/0
<22>2020-12-01T06:05:59.677412+00:00 RPDBADBAD135DCC INFO  bcm316x_ds_ofdm_set_cli_cfg : channel 158 TLV63 UP RESET
<22>2020-12-01T06:05:59.677448+00:00 RPDBADBAD135DCC INFO  bcm316x_ds_set_ofdm_cfg chan:158 dps:5 admin state old OTHER new UP
<22>2020-12-01T06:05:59.677481+00:00 RPDBADBAD135DCC INFO  bcm316x_ds_set_ofdm_cfg chan:158 dps:5 up
<22>2020-12-01T06:06:00.199473+00:00 RPDBADBAD135DCC INFO  OFDM channel 158 TLV63 ret 0 active 158/0
root@RPDbadbad135dcc:/#

Note

All commands support automore when required.

show mem

To display the system-wide and per-process memory information, use the show mem command in privileged EXEC mode.

show cpu { history }

Syntax Description


history	Shows the history of memory usage percentage in a graphical format.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.
Cisco 1x2 / Compact Shelf RPD Software 7.6	The `history` option was introduced.

Example

The following is a sample output of the show mem command:

R-PHY# show mem
------ System memory ------
MemTotal:         898020 kB
MemFree:          141804 kB
MemAvailable:     209876 kB
Buffers:            2504 kB
Cached:            71884 kB
Active:           522032 kB
Inactive:          49412 kB
SwapTotal:        448508 kB
SwapFree:         448508 kB
Shmem:              1008 kB
----- Per-process memory ------
  VSZ VSZRW   RSS (SHR) DETAILS
 808m  219m 81520 70728 HalDriverClient
 360m 96784 45152  6212 l2tp_agent
 342m  135m 65332  7072 PtpHalDriverClient
 278m 79048 43708  6224 rcp_agent
 198m 61396 44632  6212 dhcp_agent
 197m 60864 42108  6264 interface_status_agent
 124m 51372 40904  6244 RpdResHalClient
 111m 39800 28512  6220 HalMain
62896 51492 57216  6444 rpd_fault_manager
------- Info -------
VSZ:    Virtual memory mapped to process (read/write + read-only)
VSZRW:  Same as VSZ but read/write only
RSS:    Total memory used by process (shared + private)
(SHR):  Same as RSS but shared memory only

Example

The following is a sample output of the show mem history command:

R-PHY#show mem history
     777777777777777777777777777777
     666666666666666666666666666666
     ..............................
     000000000010000000100000000000
81.0
80.5
80.0
79.5
79.0
78.5
78.0
77.5
77.0
76.5
76.0 ******************************
    0.....6.....1.....1.....2.....3
          0     2     8     4     0
                0     0     0     0
 Memory usage percentage (last 300 seconds / 5 minutes)

     77777777777
     66666665555
     ...........
     11103017766
80.0
79.5
79.0
78.5
78.0
77.5
77.0
76.5     *
76.0 #######
75.5 ###########
75.0 ###########
    0.....3.....6.....9.....1.....1.....1.....2.....2.....2.....3.....3.....3
          0     0     0     2     5     8     1     4     7     0     3     6
                            0     0     0     0     0     0     0     0     0
            Memory usage percentage (last 360 minutes / 6 hours)
         * = maximum % per 5 minutes    # = average % per 5 minutes





 5.0
 4.5
 4.0
 3.5
 3.0
 2.5
 2.0
 1.5
 1.0
 0.5
 0.0
    0...2...4...7...9...1...1...1...1...2...2...2...2...3...3
        4   8   2   6   2   4   6   9   1   4   6   8   1   3
                        0   4   8   2   6   0   4   8   2   6
       Memory usage percentage (last 336 hours / 14 days)
     * = maximum % per 6 hours    # = average % per 6 hours

show multicore config

To check the core list information configured by TLV88.1 on the RPD, use the show multicore config command in privileged EXEC mode.

show multicore config

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 8.6	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show multicore config command:

R-PHY# show multicore config
Index  ConfiguredCoreIp  
0      11.1.1.10

show ofdma

To display the Orthogonal Frequency Division Multiple Access (OFDMA) channel details, use the show ofdma command in privileged EXEC mode.

show ofdma { cw-errs | | config | | iuc | | ofdmaindex }

Syntax Description


cw-errs	Shows the codeword error count for the OFDMA channel, indicating channel RF quality.
config	Shows the configuration for the OFDMA channel.
iuc `ofdmaindex`	Shows the per-IUC data for codewords and MER (`ofdmaIndex` = 0 for port 0 or 2 for port 1)

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 RPD Software 1.1	This command was introduced.

Usage Guidelines

None.

Example: Displays Codeword Error Count for OFDMA Channel

This example shows how to display the codeword error count for the OFDMA channel.

R-PHY# show ofdma cw-errs 

OFDMA_0: UP (admin UP)
     CW Count        168
     CW Errs           0
     Avg: 0.0000

OFDMA_1: DOWN (admin DOWN)
     CW Count          0
     CW Errs           0
     Avg: 0.0000

OFDMA_2: UP (admin UP)
     CW Count          0
     CW Errs           0
     Avg: 0.0000

OFDMA_3: DOWN (admin DOWN)
     CW Count          0
     CW Errs           0
     Avg: 0.0000

Example: Displays Configuration for OFDMA Channel

This example shows how to display the configuration for the OFDMA channel.

R-PHY# show ofdma config 
OFDMA Channel Configuration
RF Port                             : 0
RF channel                          : 0
State                               : UP
Starting Minislot                   : 2568605545
Target Rx Power Adjust              : 20
Enable Flow Tags                    : 1
Max Req Block Enq Timeout           : 0
Max Req Block Enq Number            : 0
Broadcast Im Region Duration        : 6
Unicast Im Region Duration          : 6
UCD Message
  UCD fields
    UCID                            : 16
    CCC                             : 5
    DSID                            : 0
    ticks per frame                 : 1179
    mslot per frame                 : 237
    Initial Ranging                 : 128
    TLV 24 Change Bitmask           : 0x0000
    TLV 25 Timestamp Snapshot       : 09 91 9c f6 96 74 87 47 c7
    TLV 26 Cyclic Prefix            : 96
    TLV 27 Rolloff Period           : 64 samples
    TLV 28 Subcarrier Spacing       : 25 KHz
    TLV 29 Subcarrier Zero Freq     : 7800000 Hz
    TLV 32 Symbols in Frame         : 9
    TLV 33 Randomization Seed       : 8153946
    TLV 3 Preamble String           : Preamble Superstring
      ff d7 d5 21 26 ec e5 e7 00 78 7f 63 6b 35 2e 29
      00 88 81 a5 bd 5f 72 7b 01 99 82 ee c7 e1 96 8d
      02 aa 87 33 48 22 bb 97 07 ff 89 55 d8 67 cc b9
      00 80 9b fe 68 a8 55 cb 00 18 1a c2 b9 f8 fe 5d
    TLV 6 Preamble String Extension : Preamble Superstring Extension
    TLV 30 Subcarrier Exclusion Band: Excluded Subcarriers
      [0000 - 0147]  [3948 - 4095]
    TLV 30 Subcarrier Unused Band   : Unused Subcarriers
      [3940 - 3947]
    TLV 23 Burst Descriptor         : IUC 3
      03 03 02 02 00 04 02 00 00 13 02 00 80
    TLV 23 Burst Descriptor         : IUC 4
      04 03 02 00 c0 04 02 00 00 14 02 00 c0
    TLV 23 Burst Descriptor         : IUC 13
      0d 15 02 48 ec
    OFDMA Profile Table:           
      IUC  Bit Loading  Pilot Pattern  Consec Mslot 
      13   16-QAM       8              236          
OFDMA Channel Configuration
RF Port                             : 0
RF channel                          : 1
State                               : UP
Starting Minislot                   : 2544667129
Target Rx Power Adjust              : 0
Enable Flow Tags                    : 1
Max Req Block Enq Timeout           : 0
Max Req Block Enq Number            : 0
Broadcast Im Region Duration        : 6
Unicast Im Region Duration          : 6
UCD Message
  UCD fields
    UCID                            : 15
    CCC                             : 9
    DSID                            : 0
    ticks per frame                 : 1179
    mslot per frame                 : 237
    Initial Ranging                 : 34
    TLV 24 Change Bitmask           : 0x0000
    TLV 25 Timestamp Snapshot       : 09 7a c8 9f 96 74 70 55 b2
    TLV 26 Cyclic Prefix            : 96
    TLV 27 Rolloff Period           : 64 samples
    TLV 28 Subcarrier Spacing       : 25 KHz
    TLV 29 Subcarrier Zero Freq     : 104800000 Hz
    TLV 32 Symbols in Frame         : 9
    TLV 33 Randomization Seed       : 8153946
    TLV 3 Preamble String           : Preamble Superstring
      ff d7 d5 21 26 ec e5 e7 00 78 7f 63 6b 35 2e 29
      00 88 81 a5 bd 5f 72 7b 01 99 82 ee c7 e1 96 8d
      02 aa 87 33 48 22 bb 97 07 ff 89 55 d8 67 cc b9
      00 80 9b fe 68 a8 55 cb 00 18 1a c2 b9 f8 fe 5d
    TLV 6 Preamble String Extension : Preamble Superstring Extension
    TLV 30 Subcarrier Exclusion Band: Excluded Subcarriers
      [0000 - 0147]  [3948 - 4095]
    TLV 30 Subcarrier Unused Band   : Unused Subcarriers
      [3940 - 3947]
    TLV 23 Burst Descriptor         : IUC 3
      03 03 02 00 88 04 02 00 00 13 02 00 22
    TLV 23 Burst Descriptor         : IUC 4
      04 03 02 01 f4 04 02 00 00 14 02 01 f4
    TLV 23 Burst Descriptor         : IUC 5
      05 15 02 c9 ec
    TLV 23 Burst Descriptor         : IUC 6
      06 15 02 b9 ec
    TLV 23 Burst Descriptor         : IUC 9
      09 15 02 a9 ec
    TLV 23 Burst Descriptor         : IUC 13
      0d 15 0a aa 01 7b 01 a9 30 58 96 a9 20
    OFDMA Profile Table:           
      IUC  Bit Loading  Pilot Pattern  Consec Mslot 
      5    4096-QAM     9              236          
      6    2048-QAM     9              236          
      9    1024-QAM     9              236          
      13   1024-QAM     10             1            
      13   128-QAM      11             1            
      13   1024-QAM     9              48           
      13   32-QAM       8              150          
      13   1024-QAM     9              32

10.4 feature DLM for OFDM support

Example: Displays per-IUC Data for Codewords and MER

This example shows how to display the per-IUC data for codewords and MER.

R-PHY# show ofdma iuc 0

IUC Counters OFDMA_0:
+---------+----------+----------+----------+----------+----------+---------------+
|   IUC   |  Grants  |  No      | FEC      | FEC Post | FEC Post |     MER       |
|         |          |  Energy  | Tot. CWs | Pass CWs | Fail CWs |  Min/Max/Avg  |
+---------+----------+----------+----------+----------+----------+---------------+
  1-   Req 2318784576 2318784427          0          0          0 0.0/0.0/0.0
  2-  ReqD          0          0          0          0          0 0.0/0.0/0.0
  3- InitM    3059008    3059006          2          2          0 0.0/0.0/0.0
  4-SMaint      42761          0      42761      42761          0 0.0/0.0/0.0
  5-  Data         94          0         96          0          0 37.75/44.50/39.75
  6-  Data          0          0          0          0          0 0.0/0.0/0.0
  9-  Data          0          0          0          0          0 0.0/0.0/0.0
 10-  Data          0          0          0          0          0 0.0/0.0/0.0
 11-  Data          0          0          0          0          0 0.0/0.0/0.0
 12-  Data          0          0          0          0          0 0.0/0.0/0.0
 13-  Data         60          0         72          0          0 38.75/45.0/44.0

show oob 55d1 statistics

To view the upstream statistics of OOB-55d1 channel, use the show oob 55d1 statistics command.

show oob 55d1 statistics

Syntax Description

This command has no arguments or keywords.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Usage Guidelines

The packets are classified as Uncorrectable, Corrected, and Good and their statistics are provided for each individual OOB-55d1 upstream channel. The output also provides the details of the last received upstream packet. You can reset this command output to zero using the clear oob statistics command.

Example

This example shows how to view the OOB-55d1 statistics:

R-PHY#show oob 55d1 statistics 

OOB 55-1 Upstream Packet statistics
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Current Log level: LOG_WARNING
Run Time: 0 Mins 20 Secs

Packets Received from Demods:
----- ---- --------------- ------------- ------------- --------------- ------- ------- -
Port  Chan Total Packets   Uncorrectable Corrected     Good            UPM ID  Rep Pwr S
----- ---- --------------- ------------- ------------- --------------- ------- ------- -
0     0                  2             0             0               2 80      -1      G
0     1                  2             0             0               2 80      -1      G
0     2                  0             0             0               0 0       0       -
----- ---- --------------- ------------- ------------- --------------- ------- ------- -
Total                    4             0             0               4 |Last Pkt Status|

1     0                  0             0             0               0 0       0       -
1     1                  0             0             0               0 0       0       -
1     2                  0             0             0               0 0       0       -
----- ---- --------------- ------------- ------------- --------------- ------- ------- -
Total                    0             0             0               0 |Last Pkt Status|

Error packets not included in the stats above: 0

Last Output Packet Dump:
------------------------
Source IP       : 2001::0558::ff40::0031::0000::0000::0000::0141
Destination IP  : 2001::0558::ff01::0030::0000::0000::0000::0011
L2TP Session ID : 0x2710(10000)
L2TP Seq Num    : 13310
ARPD Source ID  : 1
ARPD Proto Rev  : 2
ARPD Seq Num    : 254
ARPD RF Port Cnt: 1
ARPD RF Port ID : 0
ARPD RF Bitmap-0: 0x0
ARPD RF Bitmap-1: 0x0
ARPD RF Bitmap-2: 0x1
ARPD Demod Power Level   : -1
ARPD Demod Packet Status : Good
ARPD Demod Time Offset   : 0

ARPD Demod Frame (Payload):
---------------------------
    40 90 00 05 03 03 F8 27 96 03 
    00 00 00 00 00 00 00 00 00 00 
    00 00 00 00 00 00 00 00 00 00 
    00 00 00 00 00 00 00 00 00 00 
    00 00 00 00 00 00 00 00 00 00 
    31 B9 31 5F

show oob 55d2 restart

To display the count of 55d2 auto restarts, use the show oob 55d2 restart command.

show oob 55d2 restart

Syntax Description

This command has no arguments or keywords.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Example

This example shows how to display the count of 55d2 auto restarts:

R-PHY#show oob 55d2 restart 
OOB 55d2 restarted 0 times.

show oob ds-mapping

To view the mapping between the RPD DS channel and the DS configuration, use the show oob ds-mapping command. The command also shows whether the RPD has received the PHY and the L2TP configuration.

show oob ds-mapping

Syntax Description

This command has no arguments or keywords.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Usage Guidelines

The downstream configuration is pushed from the Core with various parameters including the Physical parameter (PHY) and the L2TP parameter along with the channel ID. At the RPD, the channel (RPD CHID ) is allocated dynamically instead of using the channel that is configured at the Core (CBR CHID).

Example

This example shows how to view the mapping between the RPD DS channel and the DS configuration:

R-PHY#show oob ds-mapping
 
RPD CHID | CBR CHID PHY / MODE  | CBR CHID L2TP / MODE |
   0     |      0       / 55-2  |       0       / 55-2 |
   1     |                      |                      |
   2     |                      |                      |

show oob fpga

To view the FPGA details of the OOB-55d1, OOB-55d2, and NDF channels for debugging, use the show oob fpga command.

show oob fpga {ndf-status | | | status}

Syntax Description


ndf-status	Shows the FPGA register-based counter for the NDF channel configured on the RPD.
status	Shows the FPGA details of the OOB-55d1 and OOB-55d2 channels.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Usage Guidelines

None.

Example

This example shows how to view the FPGA details of the OOB-55d1 channel:

R-PHY#show oob fpga status 

Run Time: 5765 mins 39 secs

OOB 55-1 Channel [163] Status from FPGA Registers
-------------------------------------------------
OOB Status      : Enabled
OOB Channel Type: 15 [55-1]
Null Pkt Drop   : Enabled
Seq Gap Disable : Set
New Buffer Overflow Handling : Enabled

OOB Session Info
-----------------
OOB Session ID   : 0x8000fff1
OOB Session Ctrl : 0x80803f00
IP SA Index      : 31
IP DA Index      : 1
MAC SA Index     : 0
MAC DA Index     : 1

OOB Channel [163] Interrupts
----------------------------
Buffer Overflow  : Not Set
Buffer Underflow : Set

OOB Channel [163] Thresholds
----------------------------
Buffer Threshold : 1
Net Threshold    : 0
Drift Threshold  : 0
Configured Buffer Depth : 255
Current Count in Buffer : 0

OOB Channel [163] Packet Counts
-------------------------------
Packet In Count [MDJT]       : 337357702
Packet Out Count [MPTF]      : 461251379
Packet Delete Count [MDJT]   : 333284136
Packet Insert Count [MDJT]   : 0
Seq Num Gap(DSO) Count [MDJT]: 0

Configured Drop packet count    : 255
Packets dropped due to overflow : 0

Example

This example shows how to view the FPGA details of the OOB-55d2 channel:

R-PHY#show oob fpga status

Run Time: 6874 mins 43 secs

OOB 55-2 Register Dump
----------------------
REF 163 RESETS                    (0x14002000): 0x00000000 (Decimal:0)
NORTHSIDE RESETS                  (0x14002004): 0x00000000 (Decimal:0)
SOUTHSIDE RESETS                  (0x14002008): 0x00000000 (Decimal:0)
IRQ                               (0x14002400): 0x00000041 (Decimal:65)
IRQ MASK                          (0x14002404): 0xffffffff (Decimal:-1)
Global IRQ Mask                   (0x14002408): 0xffffffff (Decimal:-1)
SERVICE CHANNEL LAST SLOT         (0x14002800): 0x000003e8 (Decimal:1000)
DEFAULT RANGING INTERVAL          (0x14002804): 0x00000010 (Decimal:16)
DEFAULT RANGING SLOT CONFIG       (0x14002808): 0x0000016e (Decimal:366)
DEFAULT NON RANGING SLOT CONFIG   (0x1400280c): 0x0000006e (Decimal:110)
RANDOMIZER MODE                   (0x14002810): 0x00000000 (Decimal:0)
MODULATOR ID                      (0x14002814): 0x00000000 (Decimal:0)
BASE OFFSET                       (0x14002818): 0x00001e66 (Decimal:7782)
UEPI INIT SEQ NUM                 (0x1400281c): 0x00000000 (Decimal:0)
DEPI INIT SEQ NUM                 (0x14002820): 0x00000000 (Decimal:0)
TSR DEBUG EN                      (0x14002824): 0x00000000 (Decimal:0)
PHY BUF ADJ VAL                   (0x14002828): 0x000ec000 (Decimal:966656)
PHY BUF ADJ EN                    (0x1400282c): 0x00000000 (Decimal:0)
MAX_DHCT_DISTANCE 0               (0x14002840): 0x00000000 (Decimal:0)
MAX_DHCT_DISTANCE 1               (0x14002844): 0x00000000 (Decimal:0)
UPSTREAM_GROUP_ID 0               (0x14002860): 0x00000000 (Decimal:0)
UPSTREAM_GROUP_ID 1               (0x14002864): 0x00000001 (Decimal:1)
NORTH BUFFER CELL OVERFLOW CNT    (0x14002880): 0x00000000 (Decimal:0)
NORTH BUFFER CELL UNDERFLOW CNT   (0x14002884): 0x00000000 (Decimal:0)
NORTH BUFFER OUT CELL CNT         (0x14002888): 0x51ee6297 (Decimal:1374577303)
NORTH BUFFER SLOT OVERFLOW CNT    (0x1400288c): 0x00000000 (Decimal:0)
NORTH BUFFER SLOT UNDERFLOW CNT   (0x14002890): 0x00000000 (Decimal:0)
NORTH BUFFER OUT SLOT CNT         (0x14002894): 0x00000033 (Decimal:51)
NORTH BUFFER CELL DISCARD CNT     (0x14002898): 0x00000000 (Decimal:0)
NORTH BUFFER SLOT DISCARD CNT     (0x1400289c): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR CTRL             (0x14002900): 0x00000001 (Decimal:1)
NORTH ENCAP ADDR MAC SRC 0        (0x14002904): 0x900b0dc6 (Decimal:-1878323770)
NORTH ENCAP ADDR MAC SRC 1        (0x14002908): 0x00000027 (Decimal:39)
NORTH ENCAP ADDR MAC DST 0        (0x1400290c): 0x5df3f581 (Decimal:1576269185)
NORTH ENCAP ADDR MAC DST 1        (0x14002910): 0x00007872 (Decimal:30834)
NORTH ENCAP ADDR IP SRC 0         (0x14002914): 0xc08c28a3 (Decimal:-1064556381)
NORTH ENCAP ADDR IP SRC 1         (0x14002918): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR IP SRC 2         (0x1400291c): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR IP SRC 3         (0x14002920): 0x20020000 (Decimal:537001984)
NORTH ENCAP ADDR IP DST 0         (0x14002924): 0xac140126 (Decimal:-1407975130)
NORTH ENCAP ADDR IP DST 1         (0x14002928): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR IP DST 2         (0x1400292c): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR IP DST 3         (0x14002930): 0x20020000 (Decimal:537001984)
NORTH ENCAP ADDR UDP SRC          (0x14002934): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR UDP DST          (0x14002938): 0x00000000 (Decimal:0)
NORTH ENCAP ADDR SESSION ID       (0x1400293c): 0x403005cd (Decimal:1076889037)
NORTH ENCAP RX FRAME CNT          (0x14002940): 0x1063fe4a (Decimal:274988618)
NORTH ENCAP TX FRAME CNT          (0x14002944): 0x1063fe4a (Decimal:274988618)
NORTH ENCAP ENC DATA OVF CNT      (0x14002948): 0x00000000 (Decimal:0)
NORTH ENCAP ENC DATA UDF CNT      (0x1400294c): 0x00000000 (Decimal:0)
NORTH ENCAP ENC CON OVF CNT       (0x14002950): 0x00000000 (Decimal:0)
NORTH ENCAP ENC CON UDF CNT       (0x14002954): 0x00000000 (Decimal:0)
NORTH ENCAP PAY OVF CNT           (0x14002980): 0x00000000 (Decimal:0)
NORTH ENCAP PAY UDF CNT           (0x14002984): 0x00000000 (Decimal:0)
NORTH ENCAP DEMUX OUT PAYLOAD CNT (0x140029c0): 0x00000087 (Decimal:135)
NORTH ENCAP DEMUX SHORT PKT CNT   (0x140029c4): 0x00000000 (Decimal:0)
NORTH ENCAP DEMUX EOP MISS CNT    (0x140029c8): 0x00000000 (Decimal:0)
SOUTH BUFFER CELL OVERFLOW CNT    (0x14002a40): 0x00000000 (Decimal:0)
SOUTH BUFFER CELL UNDERFLOW CNT   (0x14002a44): 0x00000000 (Decimal:0)
SOUTH BUFFER OUT CELL CNT         (0x14002a48): 0x00000087 (Decimal:135)
SOUTH ENCAP ADDR CTRL             (0x14002a80): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR MAC SRC 0        (0x14002a84): 0x5df3f581 (Decimal:1576269185)
SOUTH ENCAP ADDR MAC SRC 1        (0x14002a88): 0x00007872 (Decimal:30834)
SOUTH ENCAP ADDR MAC DST 0        (0x14002a8c): 0x900b0dc6 (Decimal:-1878323770)
SOUTH ENCAP ADDR MAC DST 1        (0x14002a90): 0x00000027 (Decimal:39)
SOUTH ENCAP ADDR IP SRC 0         (0x14002a94): 0xac140126 (Decimal:-1407975130)
SOUTH ENCAP ADDR IP SRC 1         (0x14002a98): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR IP SRC 2         (0x14002a9c): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR IP SRC 3         (0x14002aa0): 0x20020000 (Decimal:537001984)
SOUTH ENCAP ADDR IP DST 0         (0x14002aa4): 0xc0a80002 (Decimal:-1062731774)
SOUTH ENCAP ADDR IP DST 1         (0x14002aa8): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR IP DST 2         (0x14002aac): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR IP DST 3         (0x14002ab0): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR UDP SRC          (0x14002ab4): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR UDP DST          (0x14002ab8): 0x00000000 (Decimal:0)
SOUTH ENCAP ADDR SESSION ID       (0x14002abc): 0xff0000a4 (Decimal:-16777052)
SOUTH ENCAP RX FRAME CNT          (0x14002b00): 0x0831ff27 (Decimal:137494311)
SOUTH ENCAP TX FRAME CNT          (0x14002b04): 0x0831ff27 (Decimal:137494311)
SOUTH ENCAP ENC DATA OVF CNT      (0x14002b08): 0x00000000 (Decimal:0)
SOUTH ENCAP ENC DATA UDF CNT      (0x14002b0c): 0x00000000 (Decimal:0)
SOUTH ENCAP ENC CON OVF CNT       (0x14002b10): 0x00000000 (Decimal:0)
SOUTH ENCAP ENC CON UDF CNT       (0x14002b14): 0x00000000 (Decimal:0)
SLOT SEL DISCARD CNT              (0x14002b40): 0x0000002f (Decimal:47)
RESTAMP DIFF ERR CNT              (0x14002b44): 0x00000000 (Decimal:0)
DAVIC FIFO FULL CNT               (0x14002b48): 0x00000000 (Decimal:0)
ESF FIFO FULL CNT                 (0x14002b4c): 0x00000000 (Decimal:0)
MINOR VERSION                     (0x14002b50): 0x00000013 (Decimal:19)
MAJOR VERSION                     (0x14002b54): 0x00000001 (Decimal:1)
SDCP TIMESTAMP                    (0x14002b58): 0x01ba5973 (Decimal:28989811)
INPUT TIMESTAMP                   (0x14002b5c): 0x01ba6afb (Decimal:28994299)
NORTH INTFC FLAGS                 (0x14002c00): 0x0000000e (Decimal:14)
NORTH DECAP SESSION ID            (0x14002c04): 0x80002236 (Decimal:-2147474890)
IP SRC ADDR 0                     (0x14002c08): 0xac140126 (Decimal:-1407975130)
IP SRC ADDR 1                     (0x14002c0c): 0x00000000 (Decimal:0)
IP SRC ADDR 2                     (0x14002c10): 0x00000000 (Decimal:0)
IP SRC ADDR 3                     (0x14002c14): 0x20020000 (Decimal:537001984)
IP DST ADDR 0                     (0x14002c18): 0x90000009 (Decimal:-1879048183)
IP DST ADDR 1                     (0x14002c1c): 0x00000000 (Decimal:0)
IP DST ADDR 2                     (0x14002c20): 0x00000000 (Decimal:0)
IP DST ADDR 3                     (0x14002c24): 0xff3a0000 (Decimal:-12976128)
NORTH DECAP ETH FRAME CNT         (0x14002c40): 0x33e5ca39 (Decimal:870697529)
NORTH DECAP ETH Q FRAME CNT       (0x14002c44): 0x00000000 (Decimal:0)
NORTH DECAP ETH QQ FRAME CNT      (0x14002c48): 0x00000000 (Decimal:0)
NORTH DECAP ETH TYP IPV4 CNT      (0x14002c4c): 0x0000516d (Decimal:20845)
NORTH DECAP ETH TYP IPV6 CNT      (0x14002c50): 0x33e195c3 (Decimal:870421955)
NORTH DECAP IPV4 OPT CNT          (0x14002c54): 0x00001ada (Decimal:6874)
NORTH DECAP IP PROT UDP CNT       (0x14002c58): 0x00cfda75 (Decimal:13621877)
NORTH DECAP IP PROT L2TPV3 CNT    (0x14002c5c): 0x32e4b27c (Decimal:853848700)
NORTH DECAP SESSION ID INVLD CNT  (0x14002c60): 0x00000000 (Decimal:0)
NORTH DECAP RESYNC CNT            (0x14002c64): 0x00000031 (Decimal:49)
NORTH DECAP PAYLOAD CNT           (0x14002c68): 0x0831a86f (Decimal:137472111)
NORTH DECAP SEQ ERR CNT           (0x14002c6c): 0x00000051 (Decimal:81)
NORTH DECAP DISCARD CNT           (0x14002c70): 0x2bb42597 (Decimal:733226391)
NORTH DECAP VALID CNT             (0x14002c74): 0x0831a870 (Decimal:137472112)
NORTH DECAP SRC NOT DST CNT       (0x14002c78): 0x0001a52b (Decimal:107819)
NORTH DECAP DST NOT SRC CNT       (0x14002c7c): 0x00000005 (Decimal:5)
SOUTH INTFC FLAGS                 (0x14003000): 0x00000002 (Decimal:2)
SOUTH DECAP SESSION ID            (0x14003044): 0x00000000 (Decimal:0)
SOUTH DECAP ETH FRAME CNT         (0x14003100): 0x01d027a6 (Decimal:30418854)
SOUTH DECAP RESERVED 1            (0x14003104): 0x00000000 (Decimal:0)
SOUTH DECAP RESERVED 2            (0x14003108): 0x00000000 (Decimal:0)
SOUTH DECAP ETH TYP IPV4 CNT      (0x1400310c): 0x00d35d13 (Decimal:13851923)
SOUTH DECAP ETH TYP IPV6 CNT      (0x14003110): 0x00000087 (Decimal:135)
SOUTH DECAP IPV4 OPT CNT          (0x14003114): 0x00000000 (Decimal:0)
SOUTH DECAP IP PROT UDP CNT       (0x14003118): 0x00d35d13 (Decimal:13851923)
SOUTH DECAP IP PROT L2TPV3 CNT    (0x1400311c): 0x00000087 (Decimal:135)
SOUTH DECAP SESSION ID INVLD CNT  (0x14003120): 0x01d0271f (Decimal:30418719)
SOUTH DECAP RESERVED 3            (0x14003124): 0x00000000 (Decimal:0)
SOUTH DECAP NO PAYLOAD CNT        (0x14003128): 0x01d0271d (Decimal:30418717)
SOUTH DECAP SEQ ERR CNT           (0x1400312c): 0x00000000 (Decimal:0)
SOUTH DECAP DISCARD CNT           (0x14003130): 0x01d0271f (Decimal:30418719)
SOUTH DECAP OOB 25 1 CNT          (0x14003134): 0x00000000 (Decimal:0)
SOUTH DECAP OOB 55 1 CNT          (0x14003138): 0x00000000 (Decimal:0)
SOUTH DECAP OOB 55 2 CNT          (0x1400313c): 0x00000087 (Decimal:135)
SOUTH DECAP DEMOD SEQ ERR CNT 0   (0x14003140): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 1   (0x14003144): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 2   (0x14003148): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 3   (0x1400314c): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 4   (0x14003150): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 5   (0x14003154): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 6   (0x14003158): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD SEQ ERR CNT 7   (0x1400315c): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD PKT CNT 0       (0x14003160): 0x00000087 (Decimal:135)
SOUTH DECAP DEMOD PKT CNT 1       (0x14003164): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD PKT CNT 2       (0x14003168): 0x00000087 (Decimal:135)
SOUTH DECAP DEMOD PKT CNT 3       (0x1400316c): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD PKT CNT 4       (0x14003170): 0x00000087 (Decimal:135)
SOUTH DECAP DEMOD PKT CNT 5       (0x14003174): 0x00000000 (Decimal:0)
SOUTH DECAP DEMOD PKT CNT 6       (0x14003178): 0x00000087 (Decimal:135)
SOUTH DECAP DEMOD PKT CNT 7       (0x1400317c): 0x00000000 (Decimal:0)
SOUTH DECAP CELL DROP CNT         (0x14003180): 0x00000000 (Decimal:0)

Example

This example shows how to view the FPGA details of the NDF channel:

R-PHY#show oob fpga ndf-status

  +------------------------ 2019-09-03 08:03:25.139 -+
  |   N D F         STATUS / STATISTICS              |
  +-----------+------------+------------+------------+
  |CHANNEL ID |    160.    |    161.    |    162.    |
  |SESSION ID | [DISABLED] | [DISABLED] | 0x1        |
  |(TYP) WIDTH| F  0.00 MHz| F  0.00 MHz| 6  5.12 MHz|
  |OUT_RATE   | 4294967295 | 4294967295 |          5 |
  |DDR_START  | 0x0        | 0x0        | 0x2200000  |
  |DDR_SIZE   |       8192 |       8192 |       1428 |
  |STRT_THRESH|      65535 |      65535 |        714 |
  |DEPTHCNT   |          0 |          0 |        722 |
  +-----------+------------+------------+------------+
  | -- I N G R E S S --       DELETE_CNT: 4026891513 |
  +-----------+------------+------------+------------+
  |ING_ADD    |          0 |          0 | 3331941204 |
  |ING_ADD/Sec|          0 |          0 |      10106 |
  |ING_DROP   |          0 |          0 |          0 |
  |ING_DSEQ   |          0 |          0 |      50681 |
  |DSEQ_ERR   |          0 |          0 |          7 |
  |FILL_ZERO  |          0 |          0 |          0 |
  +-----------+------------+------------+------------+
  | -- E G R E S S --          FRAME_CNT: 1670678445 |
  +-----------+------------+------------+------------+
  |FRM_FLSHCNT|          0 |          0 |          0 |
  |FRM_INSCNT |          0 |          0 |          0 |
  |FRM_FRMCNT |          0 |          0 |  971924573 |
  |FRMs / Sec |          0 |          0 |      68088 |
  +-----------+------------+------------+------------+

show oob time sync

To display the timestamp values across various OOB (55-2) modules, use the show oob time sync command.

show oob time sync

Syntax Description

This command has no arguments or keywords.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Example

This example shows how to display the timestamp values across various OOB (55-2) modules:

R-PHY#show oob time sync 
BCM TOP(32 3.0): 0xdfee2592, US OOB: 0xdfee3698 LY OOB: 0xdfee4063
BCM diff(ticks): 0x1106, (usec): 425
55-2 diff(ticks): 0x9cb, (usec): 244

show provision

To display information on all the CCAP cores, use the show provision command in privileged EXEC mode.

show provision {ccap-core [index] | gcp [ccap-identification | conn-verification ] | history | manager [history] | message-history | state }

Syntax Description


ccap-core	Displays CCAP cores information.
ccap-core `index`	Displays the information of a specific CCAP core.
gcp	Displays gcp provision information.
gcp ccap-identification	Displays CCAP core identification information.
gcp conn-verification	Displays information on the gcp connection verification parameters.
history	Displays information on the core provision history.
manager	Displays information on the provision manager state.
manager history	Displays information on the provision manager state change history.
message-history	Dispalys information on the provision agent state change history.
state	Displays the RPD provision state information.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following are sample output of the show provision ccap-core command:

R-PHY# show provision ccap-core
Core-Index  Interface  IP        Name      State   Role       Core-Mode  Initiated-By           PTP   L2TP  
0           vbh0       11.1.6.3  CCAPCORE  online  Principal  Active     DHCP                   True  True  
1           vbh0       11.1.6.2  CCAPCORE  online  Principal  Standby    Provision_operational  True  True

The following are sample output of the show provision ccap-core index command:

R-PHY# show provision ccap-core 0
Core Index                    0
Core ID:                      CORE-3169051674
Core IP:                      11.1.6.3
Current State:                online
Core Role:                    Principal
Core Mode:                    Active
Initiated By:                 DHCP
Core StartTime:               2019 May 09 01:22:07:468486
Remote ID:                    badbad0a0ef3
Core Name:                    CCAPCORE
Vendor ID:                    9

The following are sample output of the show provision gcp command:

R-PHY# show provision gcp
Core-Index  Core-IP   Local-IP    Principal  Status  
0           11.1.6.3  11.1.6.100  Yes        OK      
1           11.1.6.2  11.1.6.100  Yes        OK

The following are sample output of the show provision gcp ccap-identification command:

R-PHY# show provision gcp ccap-identification
Index  CoreId        CoreIpAddress  IsPrincipal  CoreMode        CoreFunction  
1      badbad0a0cbe  11.1.6.2       True         CoreModeBackup  221           
0      badbad0a0ef3  11.1.6.3       True         CoreModeActive  223

The following are sample output of the show provision gcp conn-verification command:

R-PHY# show provision gcp conn-verification
CoreId        MaxGcpIdleTime  GcpRecoveryAction          GcpRecoveryActionRetry  GcpRecoveryActionDelay  GcpReconnectTimeout  
badbad0a0ef3  0               GcpReconnectToTheSameCore  3                       30                      30                   
badbad0a0cbe  0               GcpReconnectToTheSameCore  3                       30                      30

The following are sample output of the show provision history command:

R-PHY# show provision history
Core-Index  Interface  IP        Mac                From-State         To-State           event                Added-By  Time                         
None        vbh0       11.1.6.3  10:04:9f:c1:08:00  none               init(ipsec)        TRIGGER_Startup      DHCP      2019 May 09 01:22:07:474424  
None        vbh0       11.1.6.3  10:04:9f:c1:08:00  init(ipsec)        init(tcp)          TRIGGER_IPSEC_OK     DHCP      2019 May 09 01:22:07:477947  
None        vbh0       11.1.6.3  10:04:9f:c1:08:00  init(tcp)          init(gcp-ira)      TRIGGER_TCP_OK       DHCP      2019 May 09 01:22:03:195866  
None        vbh0       11.1.6.3  10:04:9f:c1:08:00  init(gcp-ira)      init(gcp-cfg)      TRIGGER_GCP_IRA      DHCP      2019 May 09 01:22:03:314571  
0           vbh0       11.1.6.3  10:04:9f:c1:08:00  init(gcp-cfg)      init(gcp-cfg-cpl)  TRIGGER_GCP_CFG      DHCP      2019 May 09 01:22:03:574936  
0           vbh0       11.1.6.3  10:04:9f:c1:08:00  init(gcp-cfg-cpl)  init(gcp-op)       TRIGGER_GCP_CFG_CPL  DHCP      2019 May 09 01:22:07:296096  
0           vbh0       11.1.6.3  10:04:9f:c1:08:00  init(gcp-op)       online             TRIGGER_GCP_OP       DHCP      2019 May 09 01:22:25:121172  
None        vbh0       11.1.6.2  10:04:9f:c1:08:00  none               init(ipsec)        TRIGGER_Startup      DHCP      2019 May 09 01:22:25:084302  
None        vbh0       11.1.6.2  10:04:9f:c1:08:00  init(ipsec)        init(tcp)          TRIGGER_IPSEC_OK     DHCP      2019 May 09 01:22:25:088141  
None        vbh0       11.1.6.2  10:04:9f:c1:08:00  init(tcp)          init(gcp-ira)      TRIGGER_TCP_OK       DHCP      2019 May 09 01:22:26:605023  
None        vbh0       11.1.6.2  10:04:9f:c1:08:00  init(gcp-ira)      init(gcp-cfg)      TRIGGER_GCP_IRA      DHCP      2019 May 09 01:22:26:753044  
1           vbh0       11.1.6.2  10:04:9f:c1:08:00  init(gcp-cfg)      init(gcp-cfg-cpl)  TRIGGER_GCP_CFG      DHCP      2019 May 09 01:22:27:755740  
1           vbh0       11.1.6.2  10:04:9f:c1:08:00  init(gcp-cfg-cpl)  init(gcp-op)       TRIGGER_GCP_CFG_CPL  DHCP      2019 May 09 01:22:27:832576  
1           vbh0       11.1.6.2  10:04:9f:c1:08:00  init(gcp-op)       online             TRIGGER_GCP_OP       DHCP      2019 May 09 01:22:30:224744

The following are sample output of the show provision manager command:

R-PHY# show provision manager
ID              State        Time                         
MGR-1890861114  OPERATIONAL  2019 May 09 01:22:25:116812

The following are sample output of the show provision manager history command:

R-PHY# show provision manager history
ID              From-State           To-State             Event              Time                         
MGR-1890861114  none                 INIT                 Startup            2019 May 09 01:20:40:615655  
MGR-1890861114  INIT                 PRINCIPLE_PROVISION  STARTUP_TOD_OK     2019 May 09 01:22:02:078449  
MGR-1890861114  PRINCIPLE_PROVISION  PRINCIPAL_FOUND      SEEK_PRINCIPAL_OK  2019 May 09 01:22:03:355617  
MGR-1890861114  PRINCIPAL_FOUND      OPERATIONAL          OPERATIONAL_OK     2019 May 09 01:22:25:116812

The following are sample output of the show provision message-history command:

R-PHY# show provision message-history
Sequence  Module     Interface  Status                Time                  
0         Interface  vbh0       DOWN                  2019 May 08 05:05:52  
1         Interface  vbh0       UP                    2019 May 08 05:05:52  
2         802.1x     vbh0       UP                    2019 May 08 05:06:27  
3         DHCP       vbh0       UP                    2019 May 08 05:07:12  
4         TOD        vbh0       UP                    2019 May 08 05:07:16  
5         GCP        ---        Soft-Reset            2019 May 08 05:15:35  
6         TOD        vbh0       DOWN                  2019 May 08 05:15:35  
7         Interface  vbh0       DOWN                  2019 May 08 05:15:49  
8         Interface  vbh0       UP                    2019 May 08 05:15:50  
9         802.1x     vbh0       UP                    2019 May 08 05:16:24  
10        DHCP       vbh0       UP                    2019 May 08 05:17:09  
11        TOD        vbh0       UP                    2019 May 08 05:17:13  
12        GCP        vbh0       Core-Add              2019 May 08 05:17:15  
13        L2TP       ---        UP                    2019 May 08 05:20:31  
14        GCP        vbh0       Sys-Operational       2019 May 08 05:20:32

The following are sample output of the show provision state command:

R-PHY# show provision state
TopLevelRpdstate:             OperationalPrincipalCore
ConnectPrincipalCoreSubState: GcpConfigPrincipalCore
LocalPtpSyncStatus:           True

NetworkAuthenticationPortIndex  NetworkAuthenticationRpdState  
1                               OperationalNotAuthenticated    


AuxCoreIndex  AuxCoreId     AuxCoreIp  AuxCoreRPDState     
1             badbad0a0cbe  11.1.6.2   OperationalAuxCore

show ptp clock

To display information of the PTP clock, use the show ptp clock command in privileged EXEC mode.

show ptp clock 0 { config | state | statistics}

Syntax Description


config	Displays ptp clock configuration.
state	Displays ptp clock run-time state infromation.
statistics	Displays ptp clock Rx/Tx packet statistics.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ptp clock 0 config command:

R-PHY# show ptp clock 0 config
Domain/Mode         :   0/OC_SLAVE
Priority 1/2/local  : 128/255/128
Profile             : 001b19000100-000000 E2E
Total Ports/Streams : 1  /2
--PTP Port   1, Enet Port   0 ----
  Port local Address :0.0.0.0
  Unicast   Duration :300 Sync Interval : -4
  Announce  Interval :  0 Timeout       : 11
  Delay-Req Intreval : -4 Pdelay-req    : -4
  Priority  local    :128 COS:  6   DSCP: 47
  ==Stream 0 : Port 1  Master IP: 33.33.158.158
  ==Stream 1 : Port 1  Master IP: 11.1.6.6

The following is a sample output of the show ptp clock 0 state command:

R-PHY# show ptp clock 0 state
apr state       : PHASE_LOCK
clock state     : SUB_SYNC
current tod     : 22115212     Sun Sep 13 23:06:52 1970
active stream   : 1
==stream    0   :
  port id       :                0
  master ip     :    33.33.158.158
  stream state  :       PHASE_LOCK
  Master offset :              -23
  Path    delay :             4381
  Forward delay :             4352
  Reverse delay :             4410
  Freq offset   :          -272493
  1Hz  offset   :                4
==stream    1   :
  port id       :                0
  master ip     :         11.1.6.6
  stream state  :       PHASE_LOCK
  Master offset :              -19
  Path    delay :             4365
  Forward delay :             4346
  Reverse delay :             4409
  Freq offset   :          -271630
  1Hz  offset   :               32

The following is a sample output of the show ptp clock 0 statistics command:

R-PHY# show ptp clock 0 statistics
AprState    8  :
           2@0-20:18:46.016          3@0-20:17:10.010          2@0-00:18:43.056
           1@0-00:17:26.254          2@0-00:16:47.912          1@0-00:16:28.652
           0@0-00:14:04.647          4@0-00:13:45.446
 ClockState  5  :
           5@0-00:17:05.662          4@0-00:17:02.453          3@0-00:16:59.064
           2@0-00:16:48.065          1@0-00:16:47.852
 BstPktStrm  2  :
           1@0-00:17:20.410          0@0-00:13:43.489
 SetTime     1  :
  1000000000@0-00:13:46.138
 StepTime    1  :
   -12930813@0-00:16:01.138
 AdjustTime  2843       :
          29@2-00:59:25.888         32@2-00:58:24.888        -39@2-00:57:23.888
          -6@2-00:56:22.888        -13@2-00:55:21.888         16@2-00:54:20.888
          47@2-00:53:19.888        104@2-00:52:18.888         95@2-00:51:17.888
streamId  msgType           rx          rxProcessed     lost        tx
 0        SYNC              1652794     1652666         0           0
 0        DELAY REQUEST     0           0               0           1652679
 0        P-DELAY REQUEST   0           0               0           0
 0        P-DELAY RESPONSE  0           0               0           0
 0        FOLLOW UP         0           0               0           0
 0        DELAY RESPONSE    1652679     1652679         2           0
 0        P-DELAY FOLLOWUP  0           0               0           0
 0        ANNOUNCE          103300      103296          0           0
 0        SIGNALING         1077        1077            0           1077
 0        MANAGEMENT        0           0               0           0
   TOTAL                    3409850     3409718         2           1653756
 1        SYNC              1652804     1652675         0           0
 1        DELAY REQUEST     0           0               0           1652678
 1        P-DELAY REQUEST   0           0               0           0
 1        P-DELAY RESPONSE  0           0               0           0
 1        FOLLOW UP         0           0               0           0
 1        DELAY RESPONSE    1652678     1652678         2           0
 1        P-DELAY FOLLOWUP  0           0               0           0
 1        ANNOUNCE          103301      103297          0           0
 1        SIGNALING         1077        1077            0           1077
 1        MANAGEMENT        0           0               0           0
   TOTAL                    3409860     3409727         2           1653755

show redundancy

To display the RPD link redundancy information, history and status, use the show redundancy command in privileged EXEC mode.

show redundancy [history | status}

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 8.2	This command was introduced on the Cisco Remote PHY Device.

The following are sample outputs of the show redundancy command:

R-PHY#show redundancy 
Redundant System Information : Daisy Chain
--------------------------------------------------------------
Current system uptime:            1233.96 seconds
Switchovers Counter:              1
Last switchover reason:           BH 0 Down

R-PHY#show redundancy history 
Mode    Reason      BH-Intf   Date                         uptime
LRED    cmd line    BH 1      Mon Apr 20 06:27:55 2020     242.587s
LRED    BH 1 Down   BH 0      Mon Apr 20 06:56:11 2020     1890.827s
LRED    BH 0 Down   BH 1      Mon Apr 20 06:57:27 2020     1966.787s

R-PHY#show redundancy status  
Initial Active: BH 1
Current Active: BH 1
Last switchover: 1966.787s Mon Apr 20 06:57:27 2020

show regproc

To display the information about the REGPROC buffers and events in the Bcm3161 chip, use the show regproc command in privileged EXEC mode.

show regproc

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show regproc command:

R-PHY# show regproc
REGPROC Statistic:                                                                                   
------------------                                                                                    
Sequence Error: 0                                                                                    
NACK          : 0                                                                                    
Good ACK      : 2016095                                                                              
Missing ACK   : 5                                                                                     
Past ACK      : 0                                                                                    
Overflow ACK  : 0                                                                                     
Write Post Err: 0                                                                                    
Inval Payld Sz: 0                                                                                    
Null Payld    : 3                                                                                     
Flush Count   : 5598                                                                                 
Invalid Args  : 0                                                                                     
Drain Read Pkt: 0                                                                                    
AsyncRd Entry : 0                                                                                    
AsyncRd LenErr: 0                                                                                     
Sock Send Fail: 0                                                                                    
Sock Read Fail: 0                                                                                     
Sock Rd Empty : 0                                                                                    
 
REGPROC Ring Buffer:
--------------------
[ 0]: head 146, tail 146
[ 1]: head 164, tail 164
[ 2]: head 183, tail 183
[ 3]: head  0, tail  0 
[ 4]: head  0, tail  0 
[ 5]: head  0, tail  0 
[ 6]: head  0, tail  0 
[ 7]: head 217, tail 217
 
 
REGPROC Async Read Buffer:
--------------------------
 
PIPE Statistic:
---------------
Master Wr Fail      : 0
Master Wr Incomp    : 0
Master Poll Fail    : 0
Master Poll Timeout : 0
Master Poll Unexpect: 0
Master Rd Fail      : 0
Master Rd Empty     : 0
Master Rd !Aligned  : 0
Master Rd Len Err   : 0
Slave Wr Fail      : 0
Slave Wr Incomplete: 0
Slave Rd Fail      : 0
Slave Rd Len Err   : 0
Master Wr/Rd Msgs   : 2014366 / 2014366 (diff: 0)
Slave Wr/Rd Msgs   : 1184768 / 1184768 (diff: 0)
 
Regproc Callback Time Statistic:
----------------------------------
Regproc CB type         : Count      Total time Max time   Max Start Time
                                     (usec)     (usec)
---------------------------------------------------------------------------------
Pipe Read CB            : 2013642    72209509   100376     2019-09-09 10:53:28
Socket Read CB          : 2013894    32238904   19877      2019-09-09 12:25:26
Etrace Socket Read CB   : 0          0          0          ---
Ofdma Socket Read CB    : 0          0          0          ---
Bcm3161 Avs Process CB  : 0          0          0          ---
Bcm316x Async Read CB   : 8406       70951      225        2019-09-09 23:40:40
Bcm316x Int Poll CB     : 84066      1173826    575        2019-09-10 06:50:44
Bcm316x Oob Gcp CB      : 42032      80221      221        2019-09-09 12:01:10
Bcm316x Wbfft Poll CB   : 840638     1719140    1005       2019-09-09 21:07:46
Bcm316x Dscalib CB      : 8406       6133089    6128       2019-09-10 06:00:00

show sfp info

To display general information about an SFP+ port , use the show sfp info command in privileged EXEC mode.

show sfp info port

Syntax Description


`port`	Specifies the port number.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

This is a sample output of the show sfp info command:

R-PHY# show sfp info 0
== SFP A0 EEPROM CONTENT ==
Reg 0x0000: 03 04 07 10 00 00 00 00  00 00 00 06 67 00 00 00
Reg 0x0010: 08 02 00 1e 43 49 53 43  4f 2d 41 56 41 47 4f 20
Reg 0x0020: 20 20 20 20 00 00 17 6a  53 46 42 52 2d 37 30 39
Reg 0x0030: 53 4d 5a 2d 43 53 31 20  47 34 2e 31 03 52 00 17
Reg 0x0040: 00 1a 00 00 41 56 44 32  31 32 31 39 39 50 44 20
Reg 0x0050: 20 20 20 20 31 37 30 36  30 31 20 20 68 f0 03 2b
Reg 0x0060: 00 00 06 a7 5a 1c b2 88  58 42 75 1d 36 b3 9b 56
Reg 0x0070: c8 d9 14 00 00 00 00 00  00 00 00 00 46 4a e1 0f
Base ID Fields:                                              
 Identifier              :0x03                              
 Ext.Identifier          :0x04                              
 Connector               :0x07                              
 Compliance Code         :0x00                              
 Transceiver Codes       :0x10 0x0 0x0 0x0 0x0 0x0 0x0 0x0  
 Encoding                :0x06                              
 BR,Nominal              :10300 Mbps                        
 Rate Identifier         :0x00                               
 Length(9um)-km          :0x00                              
 Length(9um)             :0x00                              
 Length(50 um OM2)       :0x08                              
 Length(62.5 um OM1)     :0x02                              
 Length(Copper)          :0x00                              
 Length(OM3)             :0x1e                              
 Vendor name             :CISCO-AVAGO                       
 Vendor OUI              :0x0 0x17 0x6a                     
 Vendor PN               :SFBR-709SMZ-CS1                   
 Vendor Rev              :0x47 0x34 0x2e 0x31               
 Wavelength              :850 nM                            
 CC Base                 :0x17                              
Extended ID Fields:                                         
 Options                 :0x0 0x1a                          
 BR, max                 :0x00                              
 BR, min                 :0x00                              
 Vendor SN               :AVD212199PD                       
 Date                    :2017-06-01                        
 Diagnostic Type         :0x68                              
 Enhanced Options        :0xf0                               
 SFP-8472 Compliance     :0x03                              
 CC EXT                  :0x2b                              
 Vendor Specific         :0x0 0x0 0x6 0xa7 0x5a 0x1c 0xb2 0x88 0x58 0x42 0x75 0x1d 0x36 0xb3 0x9b 0x56
                         :0xc8 0xd9 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x46 0x4a 0xe1 0xf       
== SFP A2 EEPROM CONTENT ==                                                                           
Reg 0x0000: 4b 00 fb 00 46 00 00 00  8d cc 74 04 87 5a 7a 76                                          
Reg 0x0010: 14 82 04 e2 14 82 04 e2  39 c7 02 e5 1c f5 07 46                                          
Reg 0x0020: 3d e9 01 97 1f 07 03 ff  00 00 00 00 00 00 00 00                                           
Reg 0x0030: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00                                          
Reg 0x0040: 00 00 00 00 3f 80 00 00  00 00 00 00 01 00 00 00                                          
Reg 0x0050: 01 00 00 00 01 00 00 00  01 00 00 00 00 00 00 14                                          
Reg 0x0060: 1f 12 80 e8 0a a0 17 4c  15 d6 00 00 00 00 00 00                                          
Reg 0x0070: 00 00 00 00 00 00 00 00  00 00 1d 00 00 00 00 00                                          
Reg 0x0080: 43 4f 55 49 41 38 4e 43  41 41 31 30 2d 32 34 31
Reg 0x0090: 35 2d 30 33 56 30 33 20  01 00 46 00 00 00 00 c6
Reg 0x00a0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
Reg 0x00b0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 aa aa
Reg 0x00c0: 53 46 50 2d 31 30 47 2d  53 52 20 20 20 20 20 20
Reg 0x00d0: 20 20 20 20 33 32 00 00  00 00 00 00 00 00 00 35
Reg 0x00e0: 1e 28 2e 2e 31 34 29 36  00 00 00 00 00 00 00 00
Reg 0x00f0: 00 00 00 00 00 66 00 00  ff ff ff ff 00 00 00 00
 
SFP Detail Diagnostic Information (Internal Calibration):
                 Measured    High Alarm  High Warning  Low Alarm   Low Warning:
Temperature:       31 C         75 C         70 C         -5 C         0 C
Voltage    :     3.30 V       3.63 V       3.46 V       2.97 V      3.13 V
BiasCurrent:     5.44 mA     10.50 mA     10.50 mA      2.50 mA     2.50 mA
Tx Power   :    -2.24 dBm     1.70 dBm    -1.30 dBm   -11.30 dBm   -7.30 dBm
Rx Power   :    -2.53 dBm     2.00 dBm    -1.00 dBm   -13.90 dBm   -9.90 dBm
 
Checking for Alarms and Warnings:
Done Checking for Alarms and Warnings
 
Diag & Control/Status:
Alarm & Warning         :0x4b 0x0 0xfb 0x0 0x46 0x0 0x0 0x0 0x8d 0xcc 0x74 0x4 0x87 0x5a 0x7a 0x76
                         :0x14 0x82 0x4 0xe2 0x14 0x82 0x4 0xe2 0x39 0xc7 0x2 0xe5 0x1c 0xf5 0x7 0x46
                         :0x3d 0xe9 0x1 0x97 0x1f 0x7 0x3 0xff
Calibration Constants   :0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x3f 0x80 0x0 0x0
                         :0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x1 0x0 0x0 0x0
                         :0x1 0x0 0x0 0x0
CC_DMI                  :0x14
Diag Monitor Data       :0x1f 0x12 0x80 0xe8 0xa 0xa0 0x17 0x4c 0x15 0xd6
Status & Control        :0x00
Reserved SFF-8079       :0x00
Alarm Flags             :0x00 0x00
Warning Flags           :0x00 0x00
Ext Status/Control      :0x00 0x00

show ssh

To display SSH related information, use the show ssh command in privileged EXEC mode.

show ssh { account | exec-timeout | nms-pubkey | rpd-pubkey | session}

Syntax Description


account	Displays SSH account information.
exec-timeout	Displays SSH session EXEC timeout.
nms-pubkey	Displays SSH NMS pubkey installed.
rpd-pubkey	Displays SSH RPD pubkey installed.
session	Displays SSH session connected.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show ssh account command:

R-PHY# show ssh account
Account Num: 1
Current SSH Accounts:
admin

The following is a sample output of the show ssh exec-timeout command:

R-PHY# show ssh exec-timeout
SSH exec-timeout: 180

The following is a sample output of the show ssh nms-pubkey command:

R-PHY# show ssh nms-pubkey
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAgEAtQCXVFm
RIwemejbTx0+U8taMq5n4Zetu71xb+dtHV8Rr0wejiK1YJkT93n9hcBxsjHRu76bLp99l
+DDNL3+THljwnMQC1CsdvRmGXoeGf1mT9aTlGDf/YfKxZMozMnR9qlGJFXlRAwGMsCRll
lnV6IkFyh59P9UdkdSSWv+QL8lCftWBmMnyt/CkqL98NK0Vp0gIYRv7UKCwhK40c8X7Ph
zxCmKVFTUv3bf9VIPNA2esgzKDFpRvMyBC2MCGbFSHmQFyWmHBHPPmLIxK98WXutoR8fzz
s+4hingZ4X9DMMNwTQ6WOzjuKq6iU= xxx@xxx.xxx.com

The following is a sample output of the show ssh rpd-pubkey command:

R-PHY# show ssh rpd-pubkey
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCGPNSaSelEB58LKG8+6xDze8MNylMkQYka/+ikfohVHfdsfsidW1GNyu3T9P0MdxFBe4VuI7FZQ51q9nnTxzkxxZ6ljXgdGZzLZh5xuBZcN1KHhS/3nCRPfXiq9e4xsfz8cundAQ8Gejqnm0z8mJFaAuMus/DZgE+y04dKg4AJrKrtYIUcKm3BcxYGkbK+bLuftgsyoVfDb4KSMNsQ86Zbu+61VNQcJBmJGZ0g6S+5SViaq+rXfp1wWllBiO1JcmdcrtvwtaWsqeYs/9rw2wU4Gzg1DL8OP7IJtTPnkzjTYHhDXojedbLa91+yq6hYs8TnOJlabVH2fUPRP3YCeHE5 root@RPD10049fc10100
Fingerprint: sha1!! fe:4b:af:a8:3c:d6:d8:9c:cf:fd:0f:8d:cd:46:1a:99:cd:0e:f7:18

The following is a sample output of the show ssh session command:

R-PHY# show ssh session
connected session: 0
ssh password auth: on
ssh NMS pubkey num: 0

show startup-capture-files

To display the startup-capture files, use the show startup-capture-files command in privileged EXEC mode.

show startup-capture-files

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

This is a sample output of the show startup-config command for all the line cards:

R-PHY# show startup-capture-files
-rw-r--r--    1 root     root         24576 Jan 11 05:03 /rpd/log/startup_capture.20190111_044935.pcap
-rw-r--r--    1 root     root         57344 Jan 11 04:57 /rpd/log/startup_capture.20190111_045137.pcap
-rw-r--r--    1 root     root       7512323 Jan 10 07:16 /rpd/log/startup_capture.20190110_070948.pcap

show static l2tp

To display static Layer 2 VPN related information, use the show static l2tp command in privileged EXEC mode.

show static l2tp { session | tunnel}

Syntax Description


session	Displays information on the static Layer 2 VPN session.
tunnel	Displays information on the Layer 2 VPN static tunnels.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show static l2tp session command:

R-PHY# show static l2tp session
Index  SessionId  CoreId             Direction  GroupAddr/DestIp      PwType  Last chg             
0      00002710   5F:67:63:70:70:5F  US         2001:558:ff01:30::11  MCM     15:56:50 2019-05-09  
1      8000fff1   5F:67:63:70:70:5F  DS         ::                    MCM     15:56:48 2019-05-09  
32     8000b000   5F:67:63:70:70:5F  DS         ::                    MCM     15:56:37 2019-05-09  
33     8000b001   5F:67:63:70:70:5F  DS         ::                    MCM     15:56:37 2019-05-09  
34     8000b002   5F:67:63:70:70:5F  DS         ::                    MCM     15:56:37 2019-05-09  
35     8000b003   5F:67:63:70:70:5F  DS         ::                    MCM     15:56:37 2019-05-09

The following is a sample output of the show static l2tp tunnel command:

R-PHY# show static l2tp tunnel
Remote Address        Local Address          State  Sessn Count  
2001:558:ff01:30::11  2001:558:ff40:31::117  est    1            
ff3a::c373:2          2001:558:ff40:31::117  est    60           
ff3c:100b::1          2001:558:ff40:31::117  est    1

show tacacs-server

To display TACACS server configured, use the show tacacs-server command in privileged EXEC mode.

show tacacs-server

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show tacacs-server command:

R-PHY# show tacacs-server
TACACS server configured:
3.3.3.3
4.4.4.4
5.5.5.5
20.1.0.33
10.79.41.148
10.79.18.145
2001:1::1

show tech-support

To display general information about the device when reporting a problem, use the show tech-support command in privileged EXEC mode.

show tech-support

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

This is a sample output of the show tech-support command:

R-PHY# show tech-support
------------------show technology------------------


----16:48:37.076 Fri May 10 2019: show clock----
16:48:37.079 Fri May 10 2019 
…

show terminal_length

To display number of lines of output to display on the terminal screen for the current session, use the show terminal_length command in privileged EXEC mode.

show terminal_length

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show terminal_length command:

R-PHY# show terminal_length
Number of lines on screen (0 for no pausing): 5

show tod

To display the date and time of the day, use the show tod command in privileged EXEC mode.

show tod

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show tod command:

R-PHY# show tod
Server     TimeOffset  Time                  Status  
11.1.1.10  28800       2019 May 10 06:35:19  OK

show upstream channel configuration

To display upstream channel configuration, use the show upstream channel configuration command in privileged EXEC mode.

show upstream channel configuration port channel

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show upstream channel configuration command:

R-PHY# show upstream channel configuration 0 0

US Channel 0 info:
======================
Channel width: 3200000
Docsis mode  : docsis20-atdma
Equal-coeff  : Off
Frequency    : 11400000
Ingress-cancl: Yes
Max-logic-ch : 1
Minislot-size: 2
Power level  : 0.0 dB (BR: 2.0, NRM: -29296dB)
Shut state   : No
IUC     Type  Pre Diff RS RS RS  T   T      FEC Last Scrmb    Guard DeInt DeInt Payld
              Len Deco En T  Len Enh Thre   En  CW   seed     Time  Depth BSize Size
req     QPSK  38  n    n  0  6   0   0x0    y   n    0x152    22    1     0x0   0x1c  
initial QPSK  384 n    y  5  44  0   0x0    y   n    0x152    48    1     0x0   0xb0  
station QPSK  384 n    y  5  44  0   0x0    y   n    0x152    48    1     0x0   0xb0  
a-s-d   64QAM 64  n    y  6  88  0   0x0    y   y    0x152    22    1     0x0   0x0   
a-l-d   64QAM 64  n    y  9  250 0   0x0    y   y    0x152    22    1     0x0   0x0   
unsol-d 64QAM 64  n    y  9  250 0   0x0    y   y    0x152    22    1     0x0   0x0

show upstream iuc counter

To display upstream physical channel counter, use the show upstream iuc counter command in privileged EXEC mode.

show upstream iuc counter port channel

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show upstream iuc counter command:

R-PHY# show upstream iuc counter 0 0
Channel Counters for physical channel 0/0, status valid(1)
+-------+----------+-------+----------+-------+-------+----------+----------+----------+-----+
|IUC    |  Grants  |Collide|  No      |Phy    |No     |   Good   | Corrected|Uncorrectd| SNR |
|       |          |       |  Energy  |Errors |Preambl|   FEC    | FEC      |FEC       |     |
+-------+----------+-------+----------+-------+-------+----------+----------+----------+-----+
|1-Req  |336905    |0      |336900    |0      |0      |0         |0         |0         |00.00|
|2-ReqD |0         |0      |0         |0      |0      |0         |0         |0         |00.00|
|3-Init |98        |0      |98        |0      |0      |0         |0         |0         |00.00|
|4-Maint|0         |0      |0         |0      |0      |0         |0         |0         |00.00|
|5-Short|0         |0      |0         |0      |0      |0         |0         |0         |00.00|
|6-Long |0         |0      |0         |0      |0      |0         |0         |0         |00.00|
|9-AShrt|0         |0      |0         |0      |0      |0         |0         |0         |00.00|
|10-ALng|25        |0      |0         |0      |0      |47        |0         |0         |42.00|
|11-AUGS|0         |0      |0         |0      |0      |0         |0         |0         |00.00|
+-------+----------+-------+----------+-------+-------+----------+----------+----------+-----+

Physical Channel 0/0 Counters:

DOCSIS 2.0 REQ Count: 335544320       DOCSIS 3.0 REQ Count: 511311872
REQ Overflow Count  :        0       Delete Packet Count :        0
High Byte Count :        0       Low Byte Count  : 2474964992
Last Update Time 12.878056 s ago

show upstream map counter

To display upstream map message counter, use the show upstream map counter command in privileged EXEC mode.

show upstream map counter port channel

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show upstream map counter command:

R-PHY# show upstream map counter 0 0
Map Processor Counters
==============================================
Mapped minislots                  : 4142462816
Discarded minislots (chan disable):          0
Discarded minislots (overlap maps):          0
Discarded minislots (early maps)  :          0
Discarded minislots (late maps)   :          0
Unmapped minislots                :       3154
Last mapped minislot              :    3529494

show upstream oob configuration

To list all the OOB upstream channel configurations for OOB-55d1, OOB-55d2, NDR, use the show upstream oob configuration command.

show upstream oob configuration {55d1 | | 55d2 | | ndr | | internal | | map | | uepi}

Syntax Description


55d1	Displays the OOB-55d1 upstream channel configuration.
55d2	Displays the OOB-55d2 upstream channel configuration.
ndr	Displays the Narrowband Digital Return (NDR) upstream channel configuration.
internal	Displays the internal debug information for OOB upstream configuration.
map	Displays the mapping between the core configured OOB channels and RPD internally allocated channel.
uepi	Displays the upstream UEPI configuration for OOB 55d1 or OOB 55d2.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Usage Guidelines

None.

Example

This example shows how to display the OOB-55d1 upstream channel configuration:

R-PHY#show upstream oob configuration 55d1

USOOB 55D1 bcm configuration:
Port Chan IntChan State Enabled DevId RfPortId DemodId Frequency CalcuFreq   RegFreq    PwrAdj
0    0    0       UP    1       1     0        0       8096000   a1eb85      a1eb85     0.0
0    1    1       UP    1       1     0        1       8480000   a99999      a99999     0.0
0    2    2       UP    1       1     0        2       8864000   b147ae      b147ae     0.0

Example

This example shows how to display the OOB-55d2 upstream channel configuration:

R-PHY#show upstream oob configuration 55d2
 
USOOB 55D2 bcm configuration:
Port Chan IntChan State Enabled DemodIdx Frequency CalcuFreq   RegFreq
0    0    0       UP    1       0        18500000  3e8e0000    3e8e0000
1    0    0       UP    1       1        18500000  3e8e0000    3e8e0000

Example

This example shows how to display the NDR channel configuration:

R-PHY#show upstream oob configuration ndr

USOOB NDR bcm configuration:
Port Chan IntChan State Enabled Frequency Mode     Sessionid  QOS MTU  PowerAdjust CalcuFreq   RegFreq     VGA   Gain  SetPoint
0    0    0       UP    1       5000000   5.12 MHz 0x1        48  1500 0           3f9c0000    3f9c0000    -9    89    16.000000


NDR Server information
gch ipv6 dip             dipv6                                   dmac              mtu    qos
0   0    192.168.126.104 0:0:0:0:0:0:0:0                         00:27:90:0a:ff:68 1500   48

Example

This example shows how to display the mapping between the core configured OOB channels and RPD internally allocated channel:

R-PHY#show upstream oob configuration map
OOBType  Port Channel InternCh GcpState     L2TP
55d2(20) 0    0       0        AdminUp(2)   True
55d2(20) 1    0       0        AdminUp(2)   False

Example

This example shows how to display the upstream UEPI configuration for OOB 55d1 or OOB 55d2:

R-PHY#show upstream oob configuration uepi
US OOB uepi 55d1 configuration:
Source Id Session id Remote IP                                     Arpd CPU
1         0x0000ad9c 2002::c09f:9f03                               1
 
US OOB uepi 55d2 not configured!

R-PHY#show upstream oob configuration uepi
US OOB uepi 55d1 not configured!
US OOB uepi 55d2 configuration:
In Session(BCM) Out Session Src IP                                        Dst IP                                        Src MAC           Dst MAC
0x40318000      0x403004a6 2002::c08c:28a3                               2002::ac14:126                                00:27:90:0b:0d:c6 78:72:5d:f3:f5:81

Example

This example shows how to display the internal debug information for OOB upstream configuration:

R-PHY#show upstream oob configuration internal

bcm oob us data (New)
gch State Frequency  rfPortId  rpdDevId demodid
0   2     20000000  0        0        0
1   0     0         0        0        0
2   0     0         0        0        0
3   2     20000000  0        0        1
4   3     11000000  1        0        1
5   0     0         0        0        0
 
bcm oob us data
gch State Frequency  rfPortId  rpdDevId demodid
0   2     20000000  0        0        0
1   0     0         0        0        0
2   0     0         0        0        0
3   2     20000000  0        0        1
4   3     11000000  1        0        1
5   0     0         0        0        0
 
55-1 IP information
ipv6 sip        sipv6                 smac              dip        dipv6                 dmac
0    0x0        0x0        0x0        00:00:00:00:00:00 0x0        0x0        0x0        00:00:00:00:00:00
 
55-2 IP information
ipv6 sip        sipv6                 smac              dip        dipv6                 dmac
1    0x0        0x20020000 0xc08c28a3 00:27:90:0b:0d:c6 0x0        0x20020000 0xac140126 78:72:5d:f3:f5:81
 
bcm oob us channel data (New)
dspIdx chan IntChan state oob_type conf dmixFreq sessionid  addRule gch demodid ipv6 pw2dcm ndrLevel adjust
0      0    0       2     20       1    20000000 0x40318000 0       0   0       0    0      0        -28.750000
0      0    0       0     0        0    0        0x0        0       0   0       0    0      0        -28.750000
0      0    0       0     0        0    0        0x0        0       0   0       0    0      0        -28.750000
1      0    0       2     20       1    20000000 0x40318000 0       3   1       0    0      0        -28.750000
1      1    1       0     0        0    0        0x0        0       4   0       0    2      0        0.000000
0      0    0       0     0        0    0        0x0        0       0   0       0    0      0        -28.750000
 
NDR IP information
gch ipv6 sip        sipv6                 smac              dip        dipv6                 dmac              mtu    qos
 
bcm oob us channel data
dspIdx chan IntChan state oob_type conf dmixFreq sessionid  addRule gch demodid ipv6 pw2dcm ndrLevel adjust
0      0    0       2     20       1    20000000 0x40318000 0       0   0       0    0      0        -28.750000
0      0    0       0     0        0    0        0x0        0       0   0       0    0      0        -28.750000
0      0    0       0     0        0    0        0x0        0       0   0       0    0      0        -28.750000
1      0    0       2     20       1    20000000 0x40318000 0       3   1       0    0      0        -28.750000
1      1    1       0     0        0    0        0x0        0       4   0       0    2      0        0.000000
0      0    0       0     0        0    0        0x0        0       0   0       0    0      0        -28.750000
 
NDR IP information
gch ipv6 sip        sipv6                 smac              dip        dipv6                 dmac              mtu    qos
 
Bcm oob us channel data (Shadow)
dspIdx chanId state oob_type rfPortId dmixFreq sessionid  rpdDevId gch demodid ipv6 pw2dcm ndrLevel mtu    qos adjust
0      0      2     20       0        20000000 0x40318000 0        0   0       1    0      0        0      0   -28.750000
0      0      0     0        0        0        0x0        0        0   0       0    0      0        0      0   0.000000
0      0      0     0        0        0        0x0        0        0   0       0    0      0        0      0   0.000000
1      0      2     20       0        20000000 0x40318000 0        3   1       1    0      0        0      0   -28.750000
1      1      3     22       1        11000000 0x2        0        4   1       1    2      0        1500   0   0.000000
0      0      0     0        0        0        0x0        0        0   0       0    0      0        0      0   0.000000
 
Channel status
gch enabled oobType confPending confInProcess confProcessTime deletePending gcpRcvd l2tpRcvd
0   1       20      0           0             0               0             1       1
1   0       0       0           0             0               0             0       0
2   0       0       0           0             0               0             0       0
3   1       20      0           0             0               0             1       0
4   0       0       0           0             0               0             0       0
5   0       0       0           0             0               0             0       0

show upstream oob counter

To view the upstream OOB-55d1, OOB-55d2, and NDR, use the show upstream oob counter command.

show upstream oob counter {55d1 | | 55d2 | | ndr}

Syntax Description


55d1
55d1
ndr

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced.

Usage Guidelines

From the FEC error message, you can get the details of the traffic in the upstream port and also the errors that might occur in the RF network before it reaches the RPD upstream port.

We recommend that you use the more generic show upstream oob counter command, which covers all the OOB upstream counters.

Example

This example shows how to view the upstream packet counter for OOB-55d1:

R-PHY#show upstream oob counter 55d1

USOOB 55D1 counters:
 Counters Packed After Firmware
 Total Tx WbFft Byte Count    0.
 Total Tx WbFft Packet Count  0.
 Total Tx UsOob Byte Count    851904.
 Total Tx UsOob Packet Count  13311.
DspIdx ChanId IntChanId AdminState Enabled dmixFreq sessionId  Bytes            Packets          FEC Error
0      0      0         UP         1       8096000  0x40308000 288192           4503             0         
0      1      1         UP         1       8480000  0x40308001 280640           4385             0         
0      2      2         UP         1       8864000  0x40308002 283072           4423             0         
[BCM To CPU] MC Rule Hit Counter : 13311
IPSM Rule Index: 73
[CPU To NC] IPSM Rule Hit Counter: 13250

Example

This example shows how to view the upstream packet counter for OOB-55d2:

R-PHY#show upstream oob counter 55d2

USOOB 55D2 counters:
 Counters Packed After Firmware
 Total Tx WbFft Byte Count    0.
 Total Tx WbFft Packet Count  0.
 Total Tx UsOob Byte Count    9180.
 Total Tx UsOob Packet Count  135.
DspIdx ChanId IntChanId AdminState Enabled dmixFreq sessionId  Bytes            Packets          FEC Error
0      0      0         UP         1       20000000 0x40318000 9180             135              0
1      0      0         UP         1       20000000 0x40318000 0                0               0

MC Rule Hit Counter: 135

Example

This example shows how to view the upstream packet counter for NDR:

R-PHY#show upstream oob counter ndr

USOOB NDR counters:
DspIdx ChanId IntChanId AdminState Enabled dmixFreq sessionId  Bytes            Packets          FEC-Error  MC-HIT-CNT
0      0      0         UP         1       5000000  0x1        1738444288       41623478         0          41616993

show upstream port status

To view the upstream port status, you can use the show upstream port status command.

show upstream port status

Syntax Description

This command has no arguments or keywords.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 9.x	This command was introduced.

Usage Guidelines

None.

Upstream Port Configuration

This example shows how to display the upstream port status:

R-PHY# show upstream port status
Port ID Port Type Oper Status
0 US UP
1 US UP

show upstream scqam-profile

To get the upstream scqam-profile query configuration and the response, use the show upstream scqam-profile command.

show upstream scqam-profile { query | response }

Syntax Description


query	This command is part of the support for TLV 150 UsScQamProfileQuery. RPD supports the readcount, read by index, read by leaf, including TLV150 UsScQamProfileQuery.
response	This command is part of the support for TLV 151 UsScQamProfileResponse. RPD supports the readcount, read by index, read by leaf, including TLV151 UsScQamProfileResponse.

Command Default

None

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 9.x	This command was introduced.

Usage Guidelines

None

Example: show upstream scqam-profile query Command

The following is a sample command to obtain the upstream scqam-profile query configuration:

R-PHY#show upstream scqam-profile query
Channel-type:  TDMA
Width:  200000
Code  Valid  ModType  PreMod  PreLen  GuardTime  
1     Yes    qam16    QPSK1   0       0          
2     Yes    qpsk     QPSK0   0       0          
3     No     qpsk     QPSK0   0       0          
4     No     qpsk     QPSK0   0       0          
5     No     qpsk     QPSK0   0       0          
6     No     qpsk     QPSK0   0       0          
7     No     qpsk     QPSK0   0       0          
8     No     qpsk     QPSK0   0       0          
9     No     qpsk     QPSK0   0       0          
10    No     qpsk     QPSK0   0       0          
11    No     qpsk     QPSK0   0       0          
12    No     qpsk     QPSK0   0       0          
13    No     qpsk     QPSK0   0       0          
14    No     qpsk     QPSK0   0       0

Example: show upstream scqam-profile response Command

The following is a sample command to obtain the upstream scqam-profile response:

R-PHY#show upstream scqam-profile response
PreambleString:03f02833ebf02833ebf02833ebf02833ebf1642892a9974767da0417bbc2758f36ff5739350dc1871988d3d22b603f296b0df3dec0ed
f3dec0edf3dec0edf3dec0edf1642892a9974767da0417bbc2758f36ff5739350dc1871988d3d22b603f296b00000000000000000000000000000000000
0000000000000000000000000
Code  PreLen  PreMod  PreOffset  ScrSeed  GuardTime  
1     36      QPSK1   396        338      8          
2     0       QPSK0   8          338      8

show upstream uepi configuration

To display upstream UEPI configuration, use the show upstream uepi configuration command in privileged EXEC mode.

show upstream uepi configuration

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show upstream uepi configuration command:

R-PHY# show upstream uepi configuration
Port Channel PwSubtype         SessionId  DstMac         DstIp                                  
0    0       PSP-UEPI-SCQAM    0x45010150 badb.ad0a.0ef3 11.1.6.3                               
0    0       PSP-BW-REQ-SCQ    0x45020034 badb.ad0a.0ef3 11.1.6.3                               
0    0       PSP-RNG-REQ-SCQ   0x45040150 badb.ad0a.0ef3 11.1.6.3                               
0    0       PSP-MAP-SCQ       0x00D40000 badb.ad0a.0ef3 11.1.6.3                               
0    0       PSP-SPECMAN       0x45080150 badb.ad0a.0ef3 11.1.6.3                               
0    1       PSP-UEPI-SCQAM    0x45010154 badb.ad0a.0ef3 11.1.6.3                               
0    1       PSP-RNG-REQ-SCQ   0x45040154 badb.ad0a.0ef3 11.1.6.3                               
0    1       PSP-MAP-SCQ       0x00D40001 badb.ad0a.0ef3 11.1.6.3                               
0    1       PSP-SPECMAN       0x45080154 badb.ad0a.0ef3 11.1.6.3                               
0    2       PSP-UEPI-SCQAM    0x45010158 badb.ad0a.0ef3 11.1.6.3                               
0    2       PSP-RNG-REQ-SCQ   0x45040158 badb.ad0a.0ef3 11.1.6.3                               
0    2       PSP-MAP-SCQ       0x00D40002 badb.ad0a.0ef3 11.1.6.3                               
0    2       PSP-SPECMAN       0x45080158 badb.ad0a.0ef3 11.1.6.3                               
0    3       PSP-UEPI-SCQAM    0x4501015C badb.ad0a.0ef3 11.1.6.3                               
0    3       PSP-RNG-REQ-SCQ   0x4504015C badb.ad0a.0ef3 11.1.6.3                               
0    3       PSP-MAP-SCQ       0x00D40003 badb.ad0a.0ef3 11.1.6.3                               
0    3       PSP-SPECMAN       0x4508015C badb.ad0a.0ef3 11.1.6.3                               
1    0       PSP-UEPI-SCQAM    0x45010160 badb.ad0a.0ef3 11.1.6.3                               
1    0       PSP-BW-REQ-SCQ    0x45020038 badb.ad0a.0ef3 11.1.6.3                               
1    0       PSP-RNG-REQ-SCQ   0x45040160 badb.ad0a.0ef3 11.1.6.3                               
1    0       PSP-MAP-SCQ       0x00D40100 badb.ad0a.0ef3 11.1.6.3                               
1    0       PSP-SPECMAN       0x45080160 badb.ad0a.0ef3 11.1.6.3                               
1    1       PSP-UEPI-SCQAM    0x45010164 badb.ad0a.0ef3 11.1.6.3                               
1    1       PSP-RNG-REQ-SCQ   0x45040164 badb.ad0a.0ef3 11.1.6.3                               
1    1       PSP-MAP-SCQ       0x00D40101 badb.ad0a.0ef3 11.1.6.3                               
1    1       PSP-SPECMAN       0x45080164 badb.ad0a.0ef3 11.1.6.3                               
1    2       PSP-UEPI-SCQAM    0x45010168 badb.ad0a.0ef3 11.1.6.3                               
1    2       PSP-RNG-REQ-SCQ   0x45040168 badb.ad0a.0ef3 11.1.6.3                               
1    2       PSP-MAP-SCQ       0x00D40102 badb.ad0a.0ef3 11.1.6.3                               
1    2       PSP-SPECMAN       0x45080168 badb.ad0a.0ef3 11.1.6.3                               
1    3       PSP-UEPI-SCQAM    0x4501016C badb.ad0a.0ef3 11.1.6.3                               
1    3       PSP-RNG-REQ-SCQ   0x4504016C badb.ad0a.0ef3 11.1.6.3                               
1    3       PSP-MAP-SCQ       0x00D40103 badb.ad0a.0ef3 11.1.6.3                               
1    3       PSP-SPECMAN       0x4508016C badb.ad0a.0ef3 11.1.6.3

show upstream uepi counter

To display upstream UEPI counter, use the show upstream uepi counter command in privileged EXEC mode.

show upstream uepi counter

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

The following is a sample output of the show upstream uepi counter command:

R-PHY# show upstream uepi counter
Port Channel PwSubtype         SessionId       Packets         
0    0       PSP-UEPI-SCQAM    0x45010150      48413           
0    0       PSP-BW-REQ-SCQ    0x45020034      48423           
0    0       PSP-RNG-REQ-SCQ   0x45040150      2648            
0    0       PSP-MAP-SCQ       0x00D40000      52268220        
0    0       PSP-SPECMAN       0x45080150      345648          
0    1       PSP-UEPI-SCQAM    0x45010154      1               
0    1       PSP-RNG-REQ-SCQ   0x45040154      2648            
0    1       PSP-MAP-SCQ       0x00D40001      52268425        
0    1       PSP-SPECMAN       0x45080154      345684          
0    2       PSP-UEPI-SCQAM    0x45010158      0               
0    2       PSP-RNG-REQ-SCQ   0x45040158      2646            
0    2       PSP-MAP-SCQ       0x00D40002      52266529        
0    2       PSP-SPECMAN       0x45080158      345696          
0    3       PSP-UEPI-SCQAM    0x4501015C      10              
0    3       PSP-RNG-REQ-SCQ   0x4504015C      2648            
0    3       PSP-MAP-SCQ       0x00D40003      52268212        
0    3       PSP-SPECMAN       0x4508015C      345660          
1    0       PSP-UEPI-SCQAM    0x45010160      47828           
1    0       PSP-BW-REQ-SCQ    0x45020038      47899           
1    0       PSP-RNG-REQ-SCQ   0x45040160      2645            
1    0       PSP-MAP-SCQ       0x00D40100      52412751        
1    0       PSP-SPECMAN       0x45080160      345504          
1    1       PSP-UEPI-SCQAM    0x45010164      41              
1    1       PSP-RNG-REQ-SCQ   0x45040164      2645            
1    1       PSP-MAP-SCQ       0x00D40101      52412484        
1    1       PSP-SPECMAN       0x45080164      345564          
1    2       PSP-UEPI-SCQAM    0x45010168      61              
1    2       PSP-RNG-REQ-SCQ   0x45040168      2656            
1    2       PSP-MAP-SCQ       0x00D40102      52412710        
1    2       PSP-SPECMAN       0x45080168      345576          
1    3       PSP-UEPI-SCQAM    0x4501016C      0               
1    3       PSP-RNG-REQ-SCQ   0x4504016C      2644            
1    3       PSP-MAP-SCQ       0x00D40103      52412282        
1    3       PSP-SPECMAN       0x4508016C      345480

show version

To view the system hardware and software status, use the show version command in privileged EXEC mode.

show version

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 2.1	This command was introduced on the Cisco Remote PHY Device.

This is a sample output of the show version command:

R-PHY# show version
Cisco RPD Software, version v6.5, build by rpd-release, on 2019-04-29 03:28:18
Branch information:
        RPD branch: (detached from RPD_V6_5_20190429)
        OpenRPD branch: (detached from RPD_V6_5_20190429)
        SeresRPD branch: (detached from RPD_V6_5_20190429)

System image file is:
current image is /bootflash/RPD-V6-5.itb.SSA.act
primary image is /bootflash/RPD-V6-5.itb.SSA.act
secondary image is /bootflash/RPD-V6-4.itb.SSA.act

Current running image information:
Current running image is signed by release key

Last reload reason: DHCP Failure

Bootloader version:
Primary:  U-Boot 2016.01 (Apr 22 2019 - 22:02:58 -0400) *
Golden:   U-Boot 2016.01 (Apr 12 2017 - 09:13:28 +0800)

IOFPGA version:
IOFPGA: 0x0354
SECVER: 0x17051701

System uptime:
 02:31:56 up 3 min,  load average: 3.02, 0.89, 0.31

System CPU information:
processor       : 0
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4

processor       : 1
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4

processor       : 2
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4

processor       : 3
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4


System memory information:
MemTotal:         898032 kB
MemFree:          164656 kB
MemAvailable:     271860 kB
Buffers:            2716 kB
Cached:           110824 kB

Hardware Information:
Hardware Version               : 1.1
Product Number(PID)            : RPHY-RPD
PCA Serial Number              : CAT2109E1C9
Asset ID                       : Asset-2
System MAC Address             : 10:04:9f:b1:13:00

show version golden

To view the details of the RPD factory-programed golden image including the image type, size, created time, hash value, and so on, use the show version golden command.

show version golden

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco 1x2 / Compact Shelf RPD Software 6.1	This command was introduced on the Cisco Remote PHY Device.

This example displays the output for the show version golden command.


R-PHY# show version golden
FIT description: Image file for the LS1043A Linux Kernel
Created: Wed Apr 19 18:58:43 2017
Image 0 (kernel@1)
Description: ARM64 Linux kernel
Created: Wed Apr 19 18:58:43 2017
Type: Kernel Image
Compression: gzip compressed
Data Size: 4735708 Bytes = 4624.71 kB = 4.52 MB
Architecture: AArch64
OS: Linux
Load Address: 0x80080000
Entry Point: 0x80080000
Hash algo: md5
Hash value: c0d04684066e3ccc3321a46590e9fbe2
Image 1 (fdt@1)
Description: Flattened Device Tree blob
Created: Wed Apr 19 18:58:43 2017
Type: Flat Device Tree
Compression: uncompressed
Data Size: 26264 Bytes = 25.65 kB = 0.03 MB
Architecture: AArch64
Hash algo: md5
Hash value: 95ab11836ddb56f5c77776e2a2e9cd8c
Image 2 (fdt@2)
Description: Flattened Device Tree blob
Created: Wed Apr 19 18:58:43 2017
Type: Flat Device Tree
Compression: uncompressed
Data Size: 25874 Bytes = 25.27 kB = 0.02 MB
Architecture: AArch64
Hash algo: sha1
Hash value: 67565983ab4e52f02d578dea043816d7ac9b7ca4
Image 3 (fdt@3)
Description: Flattened Device Tree blob
Created: Wed Apr 19 18:58:43 2017
Type: Flat Device Tree
Compression: uncompressed
Data Size: 24665 Bytes = 24.09 kB = 0.02 MB
Architecture: AArch64
Hash algo: sha1
Hash value: 320f176ec348981b519b3ddede87c5d813167989
Image 4 (ramdisk@1)
Description: LS1043 Ramdisk
Created: Wed Apr 19 18:58:43 2017
Type: RAMDisk Image
Compression: uncompressed
Data Size: 27096692 Bytes = 26461.61 kB = 25.84 MB
Architecture: AArch64
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Hash algo: md5
Hash value: d6e6934199290fd7f0d4d3e3bad9db69
Default Configuration: 'config@1'
Configuration 0 (config@1)
Description: Boot Linux kernel
Kernel: kernel@1
Init Ramdisk: ramdisk@1
FDT: fdt@1
Configuration 1 (config@2)
Description: Boot Linux kernel
Kernel: kernel@1
Init Ramdisk: ramdisk@1
FDT: fdt@2
Configuration 2 (config@3)
Description: Boot Linux kernel
Kernel: kernel@1
Init Ramdisk: ramdisk@1
FDT: fdt@3

show vga

To display the VGA settings and other VGA-related configurations in the OOB and the DOCSIS upstream receivers, use the show vga command.

show vga

Syntax Description

This command has no arguments or keywords.

Command Default

None.

Command Modes

Privileged EXEC mode (#)

Command History


Release	Modification
Cisco 1x2 RPD Software 1.1	This command is introduced.
Cisco 1x2 / Compact Shelf RPD Software 10.4	The show vga command displays the TLV 98.3 information that is configured on the RPHY.

Usage Guidelines

DOCSIS receivers can use PHY’s internal NB-GAIN/power-adjust to adjust the individual receivers' power level, while the TLV 98.3 is used to update the VGA on RPHY ports.

Example

The example shows how to display the VGA information and TLV98.3 configuration:

R-PHY#show vga 
OOB US S/W VGA Gain:
    Port0: 11
    Port1: 11

 OOB US Default Gain Calculated:
    Port0: 11
    Port1: 11

 Enable Upstream Calibration: TRUE

Upstream Calibration - Port0: 10 0 Port1: 10 0
VGA of platform: CSHELF
VGA Setting: Power values below in reference to 0dBmV/6.4Mhz
Port0: 0x13 (+7db)
Port1: 0x10 (+10db)
NB-GAIN Setting:
 Port 0 (SCQAM0)
  receiver 1 : 31(0x1f) adj:-0.4:-0.2 db
  receiver 2 : 32(0x20) adj:-0.1:+0.1 db
  receiver 3 : 32(0x20) adj:-0.1:+0.1 db
  receiver 4 : 32(0x20) adj:-0.1:+0.1 db
  receiver 5 : 32(0x20) adj:-0.1:+0.1 db
  receiver 6 : 32(0x20) adj:-0.1:+0.1 db
  receiver 7 : 32(0x20) adj:-0.1:+0.1 db
  receiver 8 : 32(0x20) adj:-0.1:+0.1 db
  receiver 9 : 32(0x20) adj:-0.1:+0.1 db
  receiver 10: 32(0x20) adj:-0.1:+0.1 db
  receiver 11: 32(0x20) adj:-0.1:+0.1 db
 Port 1 (SCQAM1)
  receiver 1 : 31(0x1f) adj:-0.4:-0.2 db
  receiver 2 : 32(0x20) adj:-0.1:+0.1 db
  receiver 3 : 32(0x20) adj:-0.1:+0.1 db
  receiver 4 : 32(0x20) adj:-0.1:+0.1 db
  receiver 5 : 32(0x20) adj:-0.1:+0.1 db
  receiver 6 : 32(0x20) adj:-0.1:+0.1 db
  receiver 7 : 32(0x20) adj:-0.1:+0.1 db
  receiver 8 : 32(0x20) adj:-0.1:+0.1 db
  receiver 9 : 32(0x20) adj:-0.1:+0.1 db
  receiver 10: 32(0x20) adj:-0.1:+0.1 db
  receiver 11: 32(0x20) adj:-0.1:+0.1 db
TLV 98.3 Setting:
Supp range for TLV 98.3: -200 to 100 TenthdBmV per 1.6MHz
 Port 0 : Enabled 
 User Config value: -60
 Port 1 : Disabled
 User Config value: --
OFDMA pwrAdjust Setting:
 Port 0 
  receiver 0 : 25(0x19) adj:-2.0 db 
 Port 1 
  Value not set as tlv98.3 disabled for this port

The output shows whether the TLV is enabled per port. It also shows the supported range of TLV 98.3 for this platform depending on whether this is CSHELF or NODE RPD. It displays the user configured value via TLV. The user configured value is used to calculate the VGA of the platform, taking into account the calibration values on upstream so that the RX power at the input port to RPD matches the desired value. If the user configured value is out of bounds of the supported range on this platform, then the minimum or maximum TLV value for the platform is used, whichever is closer.

The user configured TLV value is in units of tenths of dB with reference to 0 dBmV/1.6 Mhz as defined in the cable labs specification.

When TLV 98.3 is enabled, the per channel power adjusts for both SCQAM and OFDMA are true power adjusts and should match the user configuration on the core. The output displays the power adjust configured per OFDMA channel on the RPD when TLV 98.3 is enabled.

Table 1. Output Field Descriptions
Output Field	Descriptions
VGA Setting:
VGA Setting: Power values below in reference to 0dBmV/6.4Mhz	VGA gain that is configured per port on the RPHY is displayed with reference to `0 dBmV/6.4 Mhz`.
Port0: 0x13 (+7db)	VGA configured on the RPHY for port 0
Port1: 0x10 (+10db)	VGA configured on the RPHY for port 1
TLV 98.3 Setting:
Supp range for TLV 98.3: -200 to 100 TenthdBmV per 1.6MHz	Supported range of TLV 98.3 on this platform.
Port 0 : Enabled	Status of TLV 98.3 on port 0
Port 1 : Disabled	Status of TLV 98.3 on port 1
User Config value: -60	User configured value of TLV 98.3 on the port
OFDMA pwrAdjust Setting:
Port 0 receiver 0 : 25(0x19) adj:-2.0 db	OFDMA power adjust for OFDMA receivers on Port 0
Port 1 Value not set as tlv 98.3 disabled for this port	OFDMA power adjust for OFDMA receivers on Port 1

Note

If TLV 98.3 is disabled on the core, then the rpd must be rebooted for the change to take effect and function correctly. After disabling the TLV 98.3 feature, the show vga output is updated to reflect the correct Rx power and vga values only upon RPD reboot.

Bias-Free Language

Results

Chapter: RPD Commands: show i through show s

RPD Commands: show i through show s

show if-status

Command Default

Command Modes

Command History

show ikev2 cacerts

Command Default

Command Modes

Command History

show ikev2 certs

Command Default

Command Modes

Command History

show ikev2 configuration

Command Default

Command Modes

Command History

show ikev2 session

Command Default

Command Modes

Command History

show interface info

Command Default

Command Modes

Command History

show ip arp

Command Default

Command Modes

Command History

show ip interface

Command Default

Command Modes

Command History

show ip route

Command Default

Command Modes

Command History

show ipv4 route

Command Default

Command Modes

Command History

show ipv6 address

Command Default

Command Modes

Command History

show ipv6 route

Command Default

Command Modes

Command History

show l2tp

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Example: Displays IGMPv3 Joint Sessions

Example: Displays Layer 2 VPN Sessions

show l2tp multicast

Command Default

Command Modes

Command History

show l2tp session

Command Default

Command Modes

Command History

show l2tp tunnel

Command Default

Command Modes

Command History

show lldp neighbors

Command Default

Command Modes

Command History

show lldp statistics

Command Default

Command Modes