SCTE-HMS-MPEG-MIB MIB module represents the MPEG equipment in the headend. It defines both the MPEG input and output MIB objects for managing MPEG input and output transport streams, programs and elementary streams. It provides both input and output related statistics, as well as program mapping and video session information. It includes the following tables:
Provides the details of input transport stream to a video session.
Describes the PSI of each incoming program.
Contains information about the elementary streams in a program.
Each entry in this table describes statistics for each input transport stream.
Specifies the UDP unicast or multicast flows of an input transport stream. For unicast streams, it represents the UDP port and optionally destination IP address of the input transport stream origination UDP IP flow. For multicast streams, it represents the set of SSM multicast groups of the input transport stream origination UDP IP flow.
Describes packet insertion information. Typical packets that are inserted at the RF output of a device are PSI, PSIP, and CVCT MPEG packets. These packets have their own PID. This table may be empty if the video device does not support packet insertion or does not have any packet insertion configured.
Specifies the diagnostic statistics objects for the output transport stream of an MPEG device.
Specifies the attributes of an outgoing transport stream SPTS or MPTS.
Describes the PSI of each outgoing program.
Contains the statistical information associated with the elementary streams of an MPEG program.
Specifies the UDP unicast or multicast of the output transport stream this entry references.
Describes program mappings, i.e., ties the input destination to the output destination for every active program in the device.
Stores video session information. The session type is VOD, SDV or DB. It captures logical information about a video stream, such as source and destination addresses, UDP port etc., and also ties this information with direct mapping of input and output programs.
Provides a quick reference of the program mapping and input/output transport stream connection information associated with a video session.
Specifies the list of output session indexes that the input transport stream entry is feeding. For unicast sessions, it typically points to just one output session. For multicast sessions, it points to all the output sessions using this internally replicated input transport stream.