The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes open and resolved severity 1 and 2 caveats and select severity 3 caveats:
The bug IDs are sorted alphanumerically.
Note | The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug ToolKit at: https://tools.cisco.com/bugsearch/ |
This chapter describes open and resolved severity 1 and 2 caveats and select severity 3 caveats:
The bug IDs are sorted alphanumerically.
Note | The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug ToolKit at: https://tools.cisco.com/bugsearch/ |
There are no open caveats for Cisco CMC OS 1.1.
.
Bug ID |
Description |
---|---|
Add a new GCP TLV comand 20 when packet len < 64 to fix FPGA issue |
|
CMC cannot upgrade from bootname on internal DHCP server. |
|
CMC Interrupt Processing Module |
|
Invalid number when "show hardware" on CMC |
|
Segmentation fault after upgrading CMC |
|
SFP TX interface SI issue for SourcePhotonics BIDI and Cisco EX module. |
|
Sometimes, FPGA download or unzip failed in u-boot debug mode. |
|
Typo in CMC error message when upgrade CMC |
There are no open caveats for Cisco CMC OS 1.1.
Bug ID |
Description |
---|---|
The cable modem upstream channel U0/U1 SNR is lower than the upstream channel U2/U3. |
|
The python security alerts are seen. |
|
The tcpdump security alerts are seen when the tcpdump package is upgraded from version 3.8.3 to 4.5.1. |
|
The diagnostic QDR and Build-in Self-test (BIST) test fails at low temperature. |
|
The show system command displays incorrect part number. |
Caveat |
Description |
---|---|
CSCup36218 |
Low temperature corner runs, for EDVT QDR BIST test, fails which is a corner case. This issue may result in packet drops. |
There are no resolved caveats for Cisco CMC OS 1.0.