- Preface
- Using the WAAS Command-Line Interface
- Cisco WAAS Software Command Summary
- CLI Commands
- EXEC Mode Commands
- Global Configuration Mode Commands
- Interface Configuration Mode Commands
- Standard ACL Configuration Mode Commands
- Extended ACL Configuration Mode Commands
- Preposition Configuration Mode Commands
- PKI Certification Authority Configuration Mode Commands
- PKI Global Settings Configuration Mode Commands
- SSL Accelerated Service Configuration Mode Commands
- SSL Cipher List Configuration Mode Commands
- SSL Global Service Configuration Mode Commands
- SSL Host Peering Service Configuration Mode Commands
- SSL Management Service Configuration Mode Commands
- WCCP Configuration Mode Commands
- Service Context Configuration Mode Commands
- Service Node Group Configuration Mode Commands
- Service Node Configuration Mode Commands
- Service Context Configuration Mode Commands
- Class Map Configuration Mode Commands
- Policy Map Configuration Mode Commands
- Policy Map Class Configuration Mode Commands
- Acronyms and Abbreviations
- Command Summary by Mode
Cisco Wide Area Application Services Command Reference 6.4.1x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 17, 2018
Chapter: Service Context Configuration Mode Commands
AppNav Controller Group Configuration Mode Commands
To configure an AppNav Controller group (ANCG) that is part of an AppNav Cluster, use the service-insertion appnav-controller-group global configuration command. To unconfigure settings, use the no form of this command.
service-insertion appnav-controller-group ancgroupname { description description | appnav-controller ip-address [ description description ]}
no service-insertion appnav-controller-group ancgroupname { description description | appnav-controller ip-address [ description description ]}
Syntax Description
Defaults
Command Modes
Device Modes
Usage Guidelines
Use the service-insertion appnav-controller-group command to configure an ANCG that is part of a AppNav Cluster. This command initiates the AppNav Controller group configuration mode, which is indicated by a different prompt (config-scg). To return to global configuration mode, enter the exit command.
Each ANC in the AppNav Cluster must be configured with the settings for each ANCG in the cluster by using the service-insertion appnav-controller-group command.
Examples
The following example shows how to configure and enable an ANCG with two ANC members, on an ANC:
Related Commands
(config-scg) appnav-controller
To configure the IP address and description of an ANC to be added to the ANCG, use the appnav-controller AppNav Controller group configuration command. To unconfigure the IP address or description, use the no form of this command.
appnav-controller ip-address [ description description ]
no appnav-controller ip-address [ description description ]
Syntax Description
Defaults
Command Modes
AppNav Controller group configuration
Device Modes
Usage Guidelines
Examples
The following example shows how to configure the IP addresses of two ANCs in an ANCG:
Related Commands
(config-scg) description
To configure the ANC description, use the description AppNav Controller group configuration command. To unconfigure the description, use the no form of this command.
Syntax Description
Specifies a description of the ANC with up to 200 alphanumeric and space characters. |
Defaults
Command Modes
AppNav Controller group configuration
Device Modes
Examples
The following example shows how to configure an ANC description:
Feedback