Configure IPv4 LAN Settings on the RV110W

Available Languages

Download Options

  • PDF     (56.3 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (95.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (74.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
Document ID:SMB2533

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configure IPv4 LAN Settings on the RV110W

Objectives

The IPv4 LAN settings can be configured to help connect devices to the RV110W. The VLAN, IP Address, and Subnet Mask can be configured on the LAN Configuration page.

The objective of this document is to show you how to configure the IPv4 LAN Settings on the RV110W.

Applicable Devices

  • RV110W

IPv4 LAN Settings

Step 1. In the web configuration utility choose Networking > LAN > LAN Configuration.

Step 2. In the VLAN drop-down menu, choose a VLAN for the IPv4 LAN.

Step 3. In the Local IP Address field, enter the LAN IP Address of the RV110W.

Step 4. In the Subnet Mask drop-down menu, choose a subnet mask for the new IP Address.

Step 5. Click Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco