Revised April 14, 2008
September 17, 2003
NOTICE:
THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Products Affected
|
Product |
Top Assembly |
Comments |
||
|---|---|---|---|---|
|
Part Number |
Rev. |
|||
|
ATUC-8-DMT-1= |
800-06778-03 |
J0 |
8 Port DMT Issue 2 Line Card |
|
|
ATUC-8-DMT-1 |
800-06778-03 |
J0 |
8 Port DMT Issue 2 Line Card |
|
|
ATUC-8-DMT-I-1= |
800-18418-01 |
E0 |
8 Port ADSL Annex B Line Card |
|
|
ATUC-8-DMT-I-1 |
800-18418-01 |
E0 |
8 Port ADSL Annex B Line Card |
|
Problem Description
An 8xDMT card that is installed into a digital subscriber line(DSL) access multiplexer (DSLAM) chassis causes the error IDPROM FIELD FORMAT ERROR, index 0x5c to occur in the output of show hardware slot xx. This is a cosmetic error.
Background
From the ATUC-8-DMT-1's PCAMAP, Rev.J0 and the ATUC-8-DMT-I-1, Rev.E0, the electically erasable programmable read only memory (EEPROM) location 0x5E and 0x5F should be programmed as FF.
Both cards have 00 values programmed in these locations instead of FF - resulting in a cosmetic error displayed.
Problem Symptoms
Slot 26: ATUC-1-DMT8 Hardware Revision : 4.0 Top Assy. Part Number : 800-06778-03 Board Revision : J0 Deviation Number : 0-0 Fab Version : 04 PCB Serial Number : SAL0733K2FM RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 CLEI Code : DML2GA0AAA Asset Identifier : IDPROM FIELD FORMAT ERROR, index 0x5C EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 01 E7 41 04 00 C0 46 03 20 00 1A 7A 03 0x10: 42 4A 30 80 00 00 00 00 02 04 C1 8B 53 41 4C 30 0x20: 37 33 33 4B 32 46 4D 03 00 81 00 00 00 00 04 00 0x30: C6 8A 44 4D 4C 32 47 41 30 41 41 41 CC 20 00 00 0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <--- 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Workaround/Solution
There is no workaround available. This cosmetic issue will be fixed in the next Cisco IOS software maintenance release 12.2(12)DA4.
DDTS
To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.
|
DDTS |
Description |
|---|---|
|
CSCec08956 (registered customers only) |
8xDMT: IDPROM FIELD FORMAT ERROR message received on NI2 |
How To Identify Hardware Levels
Example: show hardware slot xx DSLAM#sh ha slot 26 Hardware Revision : 4.0 Top Assy. Part Number : 800-06778-03 Board Revision : J0 Deviation Number : 0-0 Fab Version : 04 PCB Serial Number : SAL0733K2FM RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 CLEI Code : DML2GA0AAA
Other Considerations
Older versions of ATUC-8-DMT-1 and ATUC-8-DMT-I-1 have values of 09 00 at locations 0x5E and 0x5F. This value however will not result in this cosmetic error displayed, as 09 00 is also a valid IDPROM Type field.
For ATUC-8-DMT-I-1, Rev.E0 EEPROM has been corrected in August - any E0 board shipped after August 21 will have the correct EEPROM.
For ATUC-8-DMT-1, Rev.J0 EEPROM has been corrected in August - any J0 board shipped after August 21 will have the correct EEPROM.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.