Home | Skip to Content | Skip to Search | Skip to Navigation | Skip to Footer |
Worldwide [change] |Register |About Cisco
Guest

Hierarchical Navigation

Cisco 1600 Series Routers

WAN Interface Card (WIC) / Platform Hardware Compatibility Matrix for 1600, 1700, 2600, 3600 and 3700 Series Routers

Downloads

Document ID: 15363


Contents

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Network Modules and WAN Interface Cards (WICs)
      Network Module and Platform Compatibility Matrix for Cisco 2600 and 3600 Series Routers
Related Information

Introduction

This document provides information for the WAN Interface Card (WIC)/Platform Hardware Compatibility Matrix for 1600, 1700, 2600, 3600, and 3700 series routers.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Network Modules and WAN Interface Cards (WICs)

The following table shows the relationship between routers and network modules or WICs.

Model

Network Modules and WAN Interface Cards (WICs)

1600

WICs with no network modules.

1700

WICs with no network modules.

2600

Network Modules (NM-2W) are populated with WICs. The built-in WIC slot (on the Chassis) can also be populated with WICs.

3600

Network Modules (for example, NM-1E2W and NM-1FE2W) are populated with WICs.

3700

Network Modules (NM-2W) are populated with WICs. The built-in WIC slot (on the Chassis) can also be populated with WICs.

The following table shows which router models support the network modules and the WAN interface cards. For more information on the modules and cards, including Cisco IOS® software support, select the link for the module or card in question.

Note: The following table does not include Voice Network Modules and Voice Interface Card (VICs). For information on voice products refer to the document Voice Hardware Compatibility Matrix (Cisco 175x, 1760, 2600, 3600, 3700, VG200, Catalyst 4000, Catalyst 6500/6000).

Model

1601(R), 1602(R), 1605-R

1603(R), 1604(R)

1700

2600, 2600XM

Network Module

Not Used

Not Used

Not Used

WIC slot

NM-2W

WIC/VWIC

WIC-1ADSL One ADSL port

No

No

Yes*

Yes*

Yes*

WIC-1SHDSL One G.SHDSL Port

No

No

Yes*

Yes*

Yes*

* Requires a minimum "ADSL" feature set for the Cisco IOS.

WIC-1ENET One 10 Base-T Ethernet

No

No

Yes

No

No

WIC-1T One serial port

Yes

Yes

Yes

Yes

Yes

WIC36-1B-S/T One ISDN BRI S/T port, requires external NT-1

No

No

No

No

No

WIC36-1B-U One ISDN BRI U port, internal NT-1

No

No

No

No

No

WIC-1B-S/T One ISDN BRI S/T port, requires external NT-1

Yes

No

Yes

Yes

Yes

WIC-1B-U One ISDN BRI U port, internal NT-1

Yes

No

Yes

Yes

Yes

WIC-1DSU-56K4 One 56/64 KBPS CSU/DSU

Yes

Yes

Yes

Yes

Yes

WIC-1B-S/T-LL One leased line ISDN BRI with S/T port

No

Yes

No

No

No

WIC-1DSU-T1 One serial port with integrated T1 CSU/DSU

Yes

Yes

Yes

Yes

Yes

WIC-2T Two serial ports using smart serial connector

No

No

Yes

Yes

Yes

WIC-2A/S Two async/sync ports using smart serial connector

No

No

Yes

Yes

Yes

WIC-1/2AM One or two-port V.90 analog modem

No

No

Yes

Yes

Yes

VWIC-1MFT-E1 1-Port RJ-48 Multiflex Trunk - E1

No

No

Yes

Yes

Yes

VWIC-2MFT-E1 2-Port RJ-48 Multiflex Trunk - E1

No

No

Yes

Yes

Yes

VWIC-2MFT-E1-DI 2-Port RJ-48 Multiflex Trunk - E1 with drop and insert

No

No

Yes

Yes

Yes

VWIC-1MFT-G703 1-Port RJ-48 Multiflex Trunk - E1 for unstructured G.703

No

No

Yes

Yes

Yes

VWIC-2MFT-G703 1-Port RJ-48 Multiflex Trunk - E1 for unstructured G.703

No

No

Yes

Yes

Yes

VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1

No

No

Yes

Yes

Yes

VWIC-2MFT-T1 2-Port RJ-48 Multiflex Trunk - T1

No

No

Yes

Yes

Yes

VWIC-2MFT-T1-DI 2-Port RJ-48 Multiflex Trunk - T1 with drop and insert

No

No

Yes

Yes

Yes

Model

3631

2691, 3725, 3745

3620, 3640

3660

Network Module

Chassis WIC slot

Chassis WIC slot

NM-1FE2W, NM-1FE1R2W, NM-2W

NM-1E2W NM-1E1R2W NM-2E2W

NM-1FE2W NM-1FE1R2W NM-2FE2W NM-2W

NM-1E2W NM-1E1R2W NM-2E2W

NM-1FE2W NM-1FE1R2W NM-2FE2W NM-2W

WIC/VWIC

WIC-1ADSL One ADSL port

No

Yes*

Yes*

No

Yes*

No

Yes*

WIC-1SHDSL One G.SHDSL port

No

Yes

Yes

No

Yes*

No

Yes*
 

* Requires a minimum "Plus" feature set for the Cisco IOS.

WIC-1ENET One 10 Base-T Ethernet

No

No

No

No

No

No

No

WIC-1T One serial port

No

Yes

Yes

Yes

Yes

Yes

Yes

WIC36-1B-S/T One ISDN BRI S/T port, requires external NT-1

No

No

No

Yes

No

No

No

WIC36-1B-U One ISDN BRI U port, internal NT-1

No

No

No

Yes

No

No

No

WIC-1B-S/T One ISDN BRI S/T port, requires external NT-1

Yes

Yes

Yes

Yes

Yes

Yes

Yes

WIC-1B-U One ISDN BRI U port, internal NT-1

Yes

Yes

Yes

Yes

Yes

Yes

Yes

WIC-1DSU-56K4 One 56/64 KBPS CSU/DSU

Yes

Yes

Yes

Yes

Yes

Yes

Yes

WIC-1B-S/T-LL One leased line ISDN BRI with S/T port

No

No

No

No

No

No

No

WIC-1DSU-T1 One serial port with integrated T1 CSU/DSU

No

Yes

Yes

Yes

Yes

Yes

Yes

WIC-2T Two serial ports using smart serial connector.

Yes

Yes

Yes

No

Yes

No

Yes

WIC-2A/S Two async/sync ports using smart serial connector

Yes

Yes

Yes

No

Yes

No

Yes

WIC-1/2AM One or two-port V.90 analog modem

No

Yes

Yes

Yes

Yes

Yes

Yes

VWIC-1MFT-E1 1-Port RJ-48 Multiflex Trunk - E1

Yes

Yes

Yes

Yes

Yes

No

Yes

VWIC-2MFT-E1 2-Port RJ-48 Multiflex Trunk - E1

Yes

Yes

Yes

No

Yes

No

Yes

VWIC-2MFT-E1-DI 2-Port RJ-48 Multiflex Trunk - E1 with drop and insert

Yes

Yes

Yes

Yes

Yes

No

Yes

VWIC-1MFT-G703 1-Port RJ-48 Multiflex Trunk - E1 for unstructured G.703

Yes

Yes

Yes

Yes

Yes

No

Yes

VWIC-2MFT-G703 2-Port RJ-48 Multiflex Trunk - E1 for unstructured G.703

Yes

Yes

Yes

No

Yes

No

Yes

VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1

Yes

Yes

Yes

Yes

Yes

No

Yes

VWIC-2MFT-T1 2-Port RJ-48 Multiflex Trunk - T1

Yes

Yes

Yes

No

Yes

No

Yes

VWIC-2MFT-T1-DI 2-Port RJ-48 Multiflex Trunk - T1 with drop and insert

Yes

Yes

Yes

Yes

Yes

No

Yes

Network Module and Platform Compatibility Matrix for Cisco 2600 and 3600 Series Routers

Note: Cisco 1600 and 1700 series routers do not have the necessary slots to support network modules (NMs).

Product Number

Description

2600, 2600XM

3620, 3640

3631

3660

2691, 3725, 3745

NM-1FE1CT1

1 Fast Ethernet Plus Channelized T1/PRI Network Modules

No

Yes

No

Yes

No

NM-1FE1CE1

1 Fast Ethernet Plus Channelized E1/PRI Network Modules

No

Yes

No

Yes

No

NM-1CT1 NM-2CT1

1/2 ISDN PRI/Channelized T1 Network Module

Yes

Yes

Yes

Yes

Yes

NM-1CE1 NM-2CE1

1/2 ISDN PRI/Channelized E1 Network Module

Yes

Yes

Yes

Yes

Yes

NM-1E2W NM-1E1R2W  NM-2E2W

Ethernet LAN/WIC Network Modules

No

Yes

No

Yes

No

NM-1FE2W NM-1FE1R2W NM-2FE2W

Fast Ethernet LAN/WIC Network Modules

No

Yes

No

Yes

Yes

NM-2W

Network Module with 2 WIC slots (no LAN ports)

Yes

Yes

No

Yes

Yes

NM-4B NM-8B

4 or 8-Port ISDN-BRI Network Module

Yes

Yes

Yes

Yes

Yes

NM-xDM

6 to 30 port Digital Modem Network Module

No

Yes

No

Yes

Yes

NM-8AM NM-16AM

Analog Modem Network Module

Yes

Yes

No

Yes

Yes

NM-4A/S NM-8A/S

4 or 8-Port Async/Sync Network Module

Yes

Yes

Yes

Yes

Yes

NM-16A NM-32A 

16 or 32 Async Network Modules

Yes

Yes

No

Yes

Yes

Note: The Cisco IOS software versions provided are typically the minimum version required to support the platform, module or feature in question. To find out the complete list of Cisco IOS versions a feature, module, interface card, or chassis is in, see the Software Advisor (registered customers only) tool. You must be a registered, logged in user to access these tools.

Related Information

Updated: Mar 03, 2008 Document ID: 15363