End-of-Sale and End-of-Life Announcement for the Cisco IronPort x60 Appliance

Available Languages

Download Options

PDF (308.9 KB)
View with Adobe Reader on a variety of devices

Updated:March 11, 2015

Document ID:1458438924758642

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL8680—Amended

Cisco announces the end-of-sale and end-of life dates for the Cisco IronPort x60 Appliance. The last day to order the affected product(s) is July 19, 2012. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

Table 1. End-of-Life Milestones and Dates for the Cisco IronPort x60 Appliance

Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end of sale and end of life of a product is distributed to the general public.	May 11, 2012
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	July 19, 2012
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	October 19, 2012
End of SW Maintenance Releases Date: HW	The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.	July 19, 2015
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.	July 19, 2013
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	July 19, 2012
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	July 19, 2016
Last Date of Support: HW	The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.	July 31, 2017

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description	Additional Information
ESA-C160-K9	ESA C160 Email Security Appliance with Software	ESA-C170-K9	ESA C170 Email Security Appliance with Software	—
ESA-C360-K9	ESA C360 Email Security Appliance with Software	ESA-C380-K9	ESA C380 Email Security Appliance with Software	—
ESA-C660-K9	ESA C660 Email Security Appliance with Software	ESA-C680-K9	ESA C680 Email Security Appliance with Software	—
ESA-X1060-K9	ESA X1060 Email Security Appliance with Software	ESA-C680-K9	ESA C680 Email Security Appliance with Software	—
SMA-M1060-K9	SMA M1060 Security Management Appliance with Software	SMA-M680-K9	SMA M680 Security Management Appliance with Software	—
SMA-M160-K9	SMA M160 Security Management Appliance with Software	SMA-M170-K9	SMA M170 Security Management Appliance with Software	—
SMA-M660-K9	SMA M660 Security Management Appliance with Software	SMA-M380-K9	SMA M380 Security Management Appliance with Software	—
WSA-S160-K9	WSA S160 Web Security Appliance with Software	WSA-S170-K9	WSA S170 Web Security Appliance with Software	—
WSA-S360-K9	WSA S360 Web Security Appliance with Software	WSA-S380-K9	WSA S380 Web Security Appliance with Software	—
WSA-S660-K9	WSA S660 Web Security Appliance with Software	WSA-S680-K9	WSA S680 Web Security Appliance with Software	—

Product Migration Options

Customers are encouraged to migrate to the Cisco x170, x380, or x680 Web, Email, and Security Management Appliances as indicated in Table 2. More information on these platforms can be found on http://www.cisco.com/c/en/us/products/security/index.html.

Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html

Customers may be able to continue to purchase Cisco IronPort x60 Appliance through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.

Service prices for Cisco products are subject to change after the product End of Sale date.

The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html

For more information about the Cisco Product Warranties, go to:
http://www.cisco.com/en/US/products/prod_warranties_listing.html

To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml

Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.

Contact Cisco

Was this Document Helpful?

Feedback