Cisco announces the end-of-sale and end-of life dates for the Cisco MGX RPM-PR Modules and Back Cards. The last day to order the affected product(s) is July 30, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco MGX RPM-PR Modules and Back Cards
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
July 30, 2010
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
July 30, 2011
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
October 28, 2011
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
July 29, 2012
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
July 29, 2012
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
October 28, 2015
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
July 31, 2016
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
MGX-FR-IR72
MGX InterDomain Routing and MPLS License for RPM
MGX-FR-IR72=
MGX InterDomain Routing and MPLS License for RPM - spare
MGX-RJ45-5-ETH
5 E/FE/GE auto-sensing ports back card for RPM-PR
MGX-RJ45-5-ETH=
5 E/FE/GE auto-sensing ports back card for RPM-PR
MGX-RPM-IP
MGX IP only Software Set for RPM - Required for RPM
MGX-RPM-IP=
MGX IP only Software Set for RPM - Required for RPM - spare
MGX-RPM-NF
MGX Netflow License for RPM
MGX-RPM-NF=
MGX Netflow License for RPM - spare
MGX-RPM-PR-256
Route Processor Module PR - 256 Meg SRAM
MGX-RPM-PR-256=
Route Processor Module PR - 256 Meg SRAM
MGX-RPM-PR-512
Route Processor Module PR - 512 Meg SRAM
MGX-RPM-PR-512=
Route Processor Module PR - 512 Meg SRAM
RPM-1-TO-N-8X50
RPM 1 to N red license
RPM-1-TO-N-8X50=
RPM 1 to N red license
Please also refer to the following End-of-Life/End-of-Sale bulletins associated with this announcement.
Table 3. Related bulletins info
End-of-Sale Product Part Number
Product Description
Bulletin Details
MGX 8830/B
Cisco MGX 8830/B ATM Multiservice Switch and Software
There is no replacement available for the Cisco MGX RPM-PR Modules and Back Cards at this time.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html.
Customers may be able to continue to purchase the Cisco MGX RPM-PR Modules and Back Cards through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
