Table C-1 WLSE Technical Specifications
Component
|
Specifications
|
Serial port
|
One 9-pin connector
|
RJ-45 ports
|
Two RJ-45 connectors for connection to integrated 10/100 Ethernet controllers
|
AC power supply wattage
|
230 W
|
AC power supply voltage
|
100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz
|
System battery
|
CR2032 3-V lithium coin cell
|
Height
|
4.3 cm (1.7 inches)
|
Width
|
42.5 cm (16.7 inches)
|
Depth
|
55 cm (22 inches)
|
Weight
|
10 kg (23 lb) maximum
|
Operating temperature
|
10° to 35°C (50° to 95°F)
|
Storage temperature
|
-40° to 65°C (-40° to 149°F)
|
Operating relative humidity
|
8% to 80% (noncondensing) with a humidity gradation of 10% per hour
|
Storage relative humidity
|
5% to 95% (noncondensing)
|
Operating maximum vibration
|
0.25 G (half-sine wave) at a sweep of 3 to 200 Hz for 15 minutes
|
Storage maximum vibration
|
0.5 G at 3 to 200 Hz for 15 minutes
|
Operating maximum shock
|
Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 41 G for up to 2 ms
|
Storage (non-operational) maximum shock
|
Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for 2 ms
|
Operating altitude
|
-16 to 2000 m (-50 to 6500 ft)
|
Storage altitude
|
-16 to 10,600 m (-50 to 35,000 ft)
|