Table Of Contents
A - B - C - D - F - G - I - L - M - N - P - R - S - T - U - V -
Index
A
AAA server
fault descriptions 2-20
access point
accessing through WLSE, troubleshooting 1-4
AP web page, accessing 1-4
fault descriptions 2-2
interface
adding, results of 1-14
removing, results of 1-14
reports, VLAN information in 1-36
Administration tab
FAQs 1-43
troubleshooting 1-44
B
backing up and restoring WLSE configuration
Windows 2000 or XP server 1-45
booting, WLSE 1-4, 1-9
browser
cannot connect to WLSE 1-7
IE, installing software updates 1-45
C
CDP
discovery without using 1-14
seed, invalid 1-14
client
inventory, troubleshooting 1-18
reports 1-33
configuration
auto-configuration 1-22
FAQs 1-19
IOS template job failures 1-23
job history, retention of 1-20
protocols used for jobs 1-20
startup template, changes to 1-22
Telnet/SSH credentials not valid 1-23
troubleshooting 1-22
updates, undoing 1-20
WEP key settings 1-20
credentials, Telnet/SSH 1-19
D
database
checking database status 1-43
date and time
incorrect 1-9
device credentials, Telnet/SSH 1-19
device name, updates to 1-14
Devices tab
FAQs 1-13
troubleshooting 1-15
discovery
devices discovered, but not displayed 1-15
Misconfigured Devices group 1-16
seed devices 1-14
SNMP Authorization Exception in discovery log 1-18
time discrepancy in jobs 1-15
troubleshooting 1-15
without CDP 1-14
dot11 mib fault
description of 2-20
troubleshooting 1-16
F
FAQs
Administration 1-43
configuration 1-19
devices 1-13
faults 1-11
firmware 1-24
general 1-1
radio manager 1-36
reports 1-32
faults
AAA server fault descriptions 2-20
access point fault descriptions 2-2
acknowledging 1-12
clearing 1-12
descriptions of 2-1
email of 1-13
FAQs 1-11
MIB file 1-12
no display 1-12
router fault description 2-28
switch fault descriptions 2-25
troubleshooting 1-12
firmware
connectivity failure 1-30
cryptography permissions, message about 1-30
email fails to arrive 1-27
FAQs 1-24
job logs 1-25
job not verified 1-28
number of devices in jobs 1-25
slow links 1-29
SNMP job fails 1-28
some devices not updated 1-27
Telnet/SSH credentials not valid 1-30
time discrepancy in jobs 1-26
troubleshooting 1-24
G
groups
Misconfigured Devices group 1-16
I
inventory
effects on traffic and performance 1-18
extra inventories 1-14
FAQs 1-14
length of time required 1-18
L
logging in
cannot log in 1-5
cannot log in as system administrator 1-5
failure of authentication source 1-44
password created in CLI 1-45
M
Misconfigured Devices system group
moving devices from 1-16
N
network
connection failure 1-6
P
passwords, loss of 1-5
performance
problems caused by frequent client inventory 1-18
protocols
SSH, disabling 1-2
Telnet, enabling 1-2
used for configuration jobs 1-20
R
radio manager
Assisted Site Survey
client walkabout, skipping 1-40
configuration, not updated 1-43
configuration, results of 1-41
Constraints and Goals, calculations of 1-41
devices in red 1-39
device tree 1-38
job, failure of 1-39
Last Scan Time Field 1-39
Location Data fields 1-40
missing building or floor nodes 1-38
multiple channels, selecting 1-40
Next button disabled 1-39, 1-41
radio scan slow 1-40
Recall button 1-40
Use Old Radio Scan Data disabled 1-39
FAQs 1-36
inventories run by 1-14
troubleshooting 1-42
reports
blank fields in 1-33
client reports, 0 values in 1-33
FAQs 1-32
not real-time 1-32
troubleshooting 1-32
VLAN information missing 1-36
routers, fault message for 2-28
S
search, for devices
no results yielded 1-4
security
authentication (WLSE)
failure of authentication source 1-44
troubleshooting 1-44
seed
invalid 1-14
setup program
incorrect entry 1-4
network connection fails 1-6
software, on WLSE
updates
Internet Explorer, problems using 1-45
SSH
disabling 1-2
switches, fault descriptions 2-25
sysContact information, updates to 1-14
sysLocation information
updates to 1-14
T
Telnet
& not accepted in credentials 1-19
connecting to WLSE 1-10
enabling 1-2
time
incorrect 1-9
traps
definition file 1-12
not forwarded 1-12
type of 1-12
troubleshooting
administration 1-44
configuration 1-22
devices 1-15
faults 1-12
firmware 1-26
radio manager 1-42
reports 1-32
U
users
authentication failure 1-44
not listed in UI 1-44
password created in CLI not accepted 1-45
simultaneous access to access points 1-2
V
VLANs
in reports 1-36