Installing and Upgrading Software Image on a CT5760

Detailed upgrade procedure can be found at http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/system_management/appendix/swiosfs.html#wp1311040

1. Copy the new image from a USB memory to flash.

Controller#copy usbflash0:/ ct5760-ipservicesk9.SSA.03.07.97.EMD.150-7.97.EMD.bin flash:

Destination filename [ct5760-ipservicesk9.SSA.03.07.97.EMD.150-7.97.EMD.bin]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

266151060 bytes copied in 36.030 secs (7386929 bytes/sec)

Controller#

2. Expand your bundled image from flash by using CLI below for the first install only. If this is not the first install, see Step 5.

Controller#software expand file flash:ct5760-ipservicesk9.SSA.03.07.97.EMD.150- 7.97.EMD.bin verbose

Preparing expand operation

[1]: Expanding bundle flash:ct5760-ipservicesk9.SSA.03.07.97.EMD.150-7.97.EMD.bin

[1]: Copying package files

[1]: Package files copied

[1]: Finished expanding bundle flash:ct5760-ipservicesk9.SSA.03.07.97.EMD.150-

7.97.EMD.bin

3. Verify the expanded files from flash.

Controller#dir flash:

Directory of flash:/

311309 -rw- 266151060 Mar 31 2010 05:58:22 +00:00 ct5760- ipservicesk9.SSA.03.07.97.EMD.150-7.97.EMD.bin

360451 -rw- 96724320 Mar 31 2010 06:00:19 +00:00 ct5760- base.SSA.03.07.97.EMD.pkg

360452 -rw- 1292972 Mar 31 2010 06:00:25 +00:00 ct5760- drivers.SSA.03.07.97.EMD.pkg

360453 -rw- 53521356 Mar 31 2010 06:00:21 +00:00 ct5760- infra.SSA.03.07.97.EMD.pkg

360454 -rw- 43506528 Mar 31 2010 06:00:23 +00:00 ct5760-iosd-

ipservicesk9.SSA.150-7.97.EMD.pkg

360455 -rw- 20646616 Mar 31 2010 06:00:22 +00:00 ct5760-

platform.SSA.03.07.97.EMD.pkg

360456 -rw- 50455240 Mar 31 2010 06:00:25 +00:00 ct5760-

wcm.SSA.03.07.97.EMD.pkg

360450 -rw- 1208 Mar 31 2010 06:00:36 +00:00 packages.conf

4. Configure boot from flash.

Controller#conf t

Controller(config)#boot system flash:packages.conf

Controller(config)#end

Controller#

5. For future upgrades, enter these commands.

software install file flash:ct5760-ipservicesk9.SSA.03.08.58.EMP.150-

8.58.EMP3.bin verbose

Preparing install operation...

[1]: Starting install operation

[1]: Expanding bundle flash:ct5760-ipservicesk9.SSA.03.08.58.EMP.150-

8.58.EMP3.bin

[1]: Copying package files

[1]: Package files copied

[1]: Finished expanding bundle flash:ct5760-ipservicesk9.SSA.03.08.58.EMP.150-

8.58.EMP3.bin

[1]: Verifying and copying expanded package files to flash:

[1]: Verified and copied expanded package files to flash:

[1]: Starting compatibility checks

[1]: Finished compatibility checks

[1]: Starting application pre-installation processing

[1]: Finished application pre-installation processing

[1]: Old files list:

Removed ct5760-base.SSA.03.08.58.EMP1.pkg

Removed ct5760-drivers.SSA.03.08.58.EMP1.pkg

Removed ct5760-infra.SSA.03.08.58.EMP1.pkg

Removed ct5760-iosd-ipservicesk9.SSA.150-8.58.EMP1.pkg

Removed ct5760-platform.SSA.03.08.58.EMP1.pkg

Removed ct5760-wcm.SSA.03.08.58.EMP1.pkg

[1]: New files list:

Added ct5760-base.SSA.03.08.58.EMP3.pkg

Added ct5760-drivers.SSA.03.08.58.EMP3.pkg

Added ct5760-infra.SSA.03.08.58.EMP3.pkg

Added ct5760-iosd-ipservicesk9.SSA.150-8.58.EMP3.pkg

Added ct5760-platform.SSA.03.08.58.EMP3.pkg

Added ct5760-wcm.SSA.03.08.58.EMP3.pkg

[1]: Creating pending provisioning file

[1]: Finished installing software. New software will load on reboot.

[1]: Committing provisioning file

[1]: Do you want to proceed with reload? [yes/no]: yes

6. Reset the system.