Catalyst 3750 Metro Switch Software Configuration Guide, 12.2(58)SE - Unsupported Commands in Cisco IOS Release 12.2(58)SE [Cisco Catalyst 3750 Metro Series Switches]

Table Of Contents

Unsupported Commands in Cisco IOS Release12.2(58)SE

Access Control Lists

Unsupported Privileged EXEC Commands

Unsupported Global Configuration Commands

ARP

Unsupported Global Configuration Commands

Unsupported Interface Configuration Commands

Boot Loader Commands

Unsupported User EXEC Command

Unsupported Global Configuration Command

CGMP

Unsupported Privileged EXEC Command

Unsupported Interface Configuration Commands

Debug

Unsupported Privileged EXEC Commands

Embedded Event Manager

Unsupported Privileged EXEC Commands

Unsupported Global Configuration Commands

Unsupported Commands in Applet Configuration Mode

Embedded Syslog Manager

Unsupported Global Configuration Commands

Unsupported Privileged EXEC Commands

FallBack Bridging

Unsupported Privileged EXEC Commands

Unsupported Global Configuration Commands

Unsupported Interface Configuration Commands

HSRP

Unsupported Global Configuration Commands

Unsupported Interface Configuration Commands

IEEE 802.1ad

Unsupported Interface Configuration Commands

IEEE 802.1x

Unsupported Global Configuration Command

Unsupported Interface Configuration Commands

IGMP Snooping

Unsupported Global Configuration Commands

Interfaces

Unsupported Privileged EXEC Command

Unsupported Global Configuration Command

Unsupported Interface Configuration Commands

IP Multicast Routing

Unsupported Privileged EXEC Commands

Unsupported Global Configuration Commands

Unsupported Interface Configuration Commands

IP Unicast Routing

Unsupported Privileged EXEC or User EXEC Commands

Unsupported Global Configuration Commands

Unsupported Interface Configuration Commands

Unsupported BGP Router Configuration Commands

Unsupported Route Map Commands

Miscellaneous

Unsupported User EXEC Commands

Unsupported Privileged EXEC Command

Unsupported User EXEC Command

Unsupported Global Configuration Commands

MPLS

Unsupported Privileged EXEC or User EXEC Commands

Unsupported Global Configuration Commands

Unsupported Interface Configuration Commands

Physical Interfaces

Tunnel Interfaces

Unsupported Routing Commands

MSDP

Unsupported Privileged EXEC Commands

Unsupported Global Configuration Commands

QoS

Unsupported Policy-Map Configuration Command

RADIUS

Unsupported Global Configuration Commands

SNMP

Unsupported Global Configuration Commands

Spanning Tree

Unsupported Global Configuration Commands

Unsupported Interface Configuration Command

Virtual Forwarding Infrastructure (VFI)

Unsupported Global Configuration Commands

Unsupported Privileged EXEC Commands

VLAN

Unsupported vlan-config Command

Unsupported Privileged EXEC Command

Unsupported User EXEC Command

VTP

Unsupported Privileged EXEC Command

Unsupported Commands in Cisco IOS Release12.2(58)SE

This appendix lists some of the command-line interface (CLI) commands that are displayed when you enter the question mark (?) at the Catalyst 3750 Metro switch prompt but are not supported in this release, either because they are not tested, or because of Catalyst 3750 Metro switch hardware limitations. This is not a complete list. The unsupported commands are listed by software feature and command mode.

Access Control Lists

Unsupported Privileged EXEC Commands

access-enable [host] [timeout minutes]

access-template [access-list-number | name] [dynamic-name] [source] [destination] [timeout minutes]

clear access-template [access-list-number | name] [dynamic-name] [source] [destination].

Unsupported Global Configuration Commands

access-list rate-limit acl-index {precedence | mask prec-mask}

access-list dynamic extended

ARP

Unsupported Global Configuration Commands

arp ip-address hardware-address smds

arp ip-address hardware-address srp-a

arp ip-address hardware-address srp-b

ip arp track

Unsupported Interface Configuration Commands

arp probe

ip probe proxy

Boot Loader Commands

Unsupported User EXEC Command

verify

Unsupported Global Configuration Command

boot buffersize

CGMP

Unsupported Privileged EXEC Command

clear ip cgmp

Unsupported Interface Configuration Commands

ip cgmp

Debug

Unsupported Privileged EXEC Commands

debug cluster

debug platform cli-redirection main

debug platform configuration

debug platform ipc

debug platform led stack

Embedded Event Manager

Unsupported Privileged EXEC Commands

event manager update user policy [policy-filename | group [group name expression] ] | repository [url location]

Parameters are not supported for this command:

event manager run [policy name] |<parameter1>|... <parameter15>|

Unsupported Global Configuration Commands

no event manager directory user repository [url location ]

event manager applet [applet-name] maxrun

Unsupported Commands in Applet Configuration Mode

no event interface name [interface-name] parameter [counter-name] entry-val [entry counter value] entry-op {gt|ge|eq|ne|lt|le} [entry-type {increment | rate | value] [exit-val [exit value] exit-op {gt|ge|eq|ne|lt|le} exit-type {increment | rate | value}][average-factor <average-factor-value>]

no trigger

tag

Embedded Syslog Manager

Unsupported Global Configuration Commands

All

Unsupported Privileged EXEC Commands

All

FallBack Bridging

Unsupported Privileged EXEC Commands

clear bridge [bridge-group] multicast [router-ports | groups | counts] [group-address] [interface-unit] [counts]

clear vlan statistics

show bridge [bridge-group] circuit-group [circuit-group] [src-mac-address] [dst-mac-address]

show bridge [bridge-group] multicast [router-ports | groups] [group-address]

show bridge vlan

show interfaces crb

show interfaces {ethernet | fastethernet} [interface | slot/port] irb

show subscriber-policy range

Unsupported Global Configuration Commands

bridge bridge-group acquire

bridge bridge-group address mac-address {forward | discard} [interface-id]

bridge bridge-group aging-time seconds

bridge bridge-group bitswap_l3_addresses

bridge bridge-group bridge ip

bridge bridge-group circuit-group circuit-group pause milliseconds

bridge bridge-group circuit-group circuit-group source-based

bridge cmf

bridge crb

bridge bridge-group domain domain-name

bridge irb

bridge bridge-group mac-address-table limit number

bridge bridge-group multicast-source

bridge bridge-group protocol dec

bridge bridge-group route protocol

bridge bridge-group subscriber policy policy

subscriber-policy policy [[no | default] packet [permit | deny]]

Unsupported Interface Configuration Commands

bridge-group bridge-group cbus-bridging

bridge-group bridge-group circuit-group circuit-number

bridge-group bridge-group input-address-list access-list-number

bridge-group bridge-group input-lat-service-deny group-list

bridge-group bridge-group input-lat-service-permit group-list

bridge-group bridge-group input-lsap-list access-list-number

bridge-group bridge-group input-pattern-list access-list-number

bridge-group bridge-group input-type-list access-list-number

bridge-group bridge-group lat-compression

bridge-group bridge-group output-address-list access-list-number

bridge-group bridge-group output-lat-service-deny group-list

bridge-group bridge-group output-lat-service-permit group-list

bridge-group bridge-group output-lsap-list access-list-number

bridge-group bridge-group output-pattern-list access-list-number

bridge-group bridge-group output-type-list access-list-number

bridge-group bridge-group sse

bridge-group bridge-group subscriber-loop-control

bridge-group bridge-group subscriber-trunk

bridge bridge-group lat-service-filtering

frame-relay map bridge dlci broadcast

interface bvi bridge-group

x25 map bridge x.121-address broadcast [options-keywords]

HSRP

Unsupported Global Configuration Commands

interface Async

interface BVI

interface Dialer

interface Group-Async

interface Lex

interface Multilink

interface Virtual-Template

interface Virtual-Tokenring

Unsupported Interface Configuration Commands

mtu

standby mac-refresh seconds

standby use-bia

IEEE 802.1ad

Unsupported Interface Configuration Commands

ethernet dot1ad isolate

IEEE 802.1x

Unsupported Global Configuration Command

dot1x critical

Unsupported Interface Configuration Commands

dot1x control-direction

dot1x critical

dot1x host-mode multi-domain

Note Entering this command can put the port in error-disabled state.

dot1x mac-auth-bypass [eap | timeout activity {value}] interface configuration command

Note The switch does not support IEEE 802.1x MAC authentication bypass.

dot1x pae

dot1x host-mode multi-domain

IGMP Snooping

Unsupported Global Configuration Commands

ip igmp snooping report-suppression

ip igmp snooping source-only-learning

ip igmp snooping tcn

Interfaces

Unsupported Privileged EXEC Command

show interfaces [interface-id | vlan vlan-id] [crb | fair-queue | irb | mac-accounting | precedence | irb | random-detect | rate-limit | shape]

Unsupported Global Configuration Command

interface tunnel

Unsupported Interface Configuration Commands

bandwidth {bandwidth-kbps | percent percent}

random-detect [dscp-based | precedence-based]

random-detect dscp dscp min-threshold max-threshold mark-prob-denominator

random-detect exponential-weighting-constant weight

random-detect precedence ip-precedence min-threshold max-threshold mark-prob-denominator

switchport broadcast level

switchport multicast level

switchport unicast level

Note The switchport broadcast, switchport multicast, and switchport unicast commands have been replaced by the storm-control {broadcast | multicast | unicast} level level [.level] interface configuration command.

transmit-interface type number

IP Multicast Routing

Unsupported Privileged EXEC Commands

clear ip rtp header-compression [type number]

The debug ip packet command displays packets received by the switch CPU. It does not display packets that are hardware-switched.

The debug ip mcache command affects packets received by the switch CPU. It does not display packets that are hardware-switched.

The debug ip mpacket [detail] [access-list-number [group-name-or-address] command affects only packets received by the switch CPU. Because most multicast packets are hardware-switched, use this command only when you know that the route will forward the packet to the CPU.

debug ip pim atm

show frame-relay ip rtp header-compression [interface type number]

The show ip mcache command displays entries in the cache for those packets that are sent to the switch CPU. Because most multicast packets are switched in hardware without CPU involvement, you can use this command, but multicast packet information is not displayed.

The show ip mpacket commands are supported but are only useful for packets received at the switch CPU. If the route is hardware-switched, the command has no effect because the CPU does not receive the packet and cannot display it.

show ip pim vc [group-address | name] [type number]

show ip rtp header-compression [type number] [detail]

Unsupported Global Configuration Commands

ip pim accept-rp {address | auto-rp} [group-access-list-number]

ip pim message-interval seconds

ip pim register-rate-limit

Unsupported Interface Configuration Commands

frame-relay ip rtp header-compression [active | passive]

frame-relay map ip ip-address dlci [broadcast] compress

frame-relay map ip ip-address dlci rtp header-compression [active | passive]

ip igmp helper-address ip-address

ip multicast helper-map {group-address | broadcast} {broadcast-address | multicast-address} extended-access-list-number

ip multicast rate-limit {in | out} [video | whiteboard] [group-list access-list] [source-list access-list] kbps

ip multicast ttl-threshold ttl-value (instead, use the ip multicast boundary access-list-number interface configuration command)

ip multicast use-functional

ip pim minimum-vc-rate pps

ip pim multipoint-signalling

ip pim nbma-mode

ip pim vc-count number

ip rtp compression-connections number

ip rtp header-compression [passive]

IP Unicast Routing

Unsupported Privileged EXEC or User EXEC Commands

clear ip accounting [checkpoint]

clear ip bgp address flap-statistics

clear ip bgp prefix-list

show cef [drop | not-cef-switched]

show ip accounting [checkpoint] [output-packets | access-violations]

show ip bgp dampened-paths

show ip bgp inconsistent-as

show ip bgp regexp regular expression

Unsupported Global Configuration Commands

ip arp track

ip accounting-list ip-address wildcard

ip accounting-transits count

ip cef accounting [per-prefix] [non-recursive]

ip cef traffic-statistics [load-interval seconds] [update-rate seconds]]

ip flow-aggregation

ip flow-cache

ip flow-export

ip gratuitous-arps

ip local

ip reflexive-list

ip route destip mask next-hop track object-num

router egp

router-isis

router iso-igrp

router mobile

router odr

router static

Unsupported Interface Configuration Commands

dampening

ip accounting

ip accounting precedence {input | output}

ip load-sharing [per-packet]

ip mtu bytes

ip ospf dead-interval minimal hello-multiplier multiplier

ip route-cache

ip verify

ip unnumbered type number

All ip security commands

Unsupported BGP Router Configuration Commands

default-information originate

neighbor advertise-map

neighbor allowas-in

neighbor default-originate

neighbor description

network backdoor

table-map

Unsupported Route Map Commands

match route-type for policy-based routing (PBR)

set automatic-tag

set dampening half-life reuse suppress max-suppress-time

set default interface interface-id [interface-id.....]

set interface interface-id [interface-id.....]

set ip default next-hop ip-address [ip-address.....]

set ip destination ip-address mask

set ip next-hop verify-availability

set ip precedence value

set ip qos-group

set metric-type internal

set origin

set metric-type internal

Miscellaneous

Unsupported User EXEC Commands

verify

Unsupported Privileged EXEC Command

file verify auto

Unsupported User EXEC Command

show mac-address-table multicast

Unsupported Global Configuration Commands

errdisable detect cause dhcp-rate-limit

errdisable recovery cause dhcp-rate-limit

errdisable recovery cause unicast flood

memory reserve critical

MPLS

Unsupported Privileged EXEC or User EXEC Commands

debug ip rsvp hello [bfd | detail | stats]

debug ip rsvp sso

debug mpls traffic-eng exp

debug mpls traffic-eng forwarding-adjacency

debug mpls traffic-eng ha

show ip rsvp fast-route

show ip rsvp hello [instance | statistics]

show mpls traffic-eng exp

show mpls traffic-eng forwarding-adjacency

Unsupported Global Configuration Commands

ip rsvp signalling hello {bfd | graceful-restart)

mpls traffic-eng auto-bw

mpls traffic-eng lsp

Unsupported Interface Configuration Commands

Physical Interfaces

ip rsvp bandwidth {mam | rdm}

ip rsvp signalling hello [bfd | dscp | fast-reroute | graceful-restart | refresh | reroute]

mpls traffic-eng srlg

Tunnel Interfaces

tunnel mpls traffic-eng auto-bw

tunnel mpls traffic-eng backup-bw

tunnel mpls traffic-eng exp

tunnel mpls traffic-eng exp-bundle

tunnel mpls traffic-eng forwarding-adjacency

tunnel mpls traffic-eng path-option dynamic attributes

tunnel mpls traffic-eng path-option explicit name attributes

tunnel mpls traffic-eng path-selection

Unsupported Routing Commands

interface auto-template

mpsl traffic-eng mesh-group (ISIS mode)

mpsl traffic-eng multicast-intact (ISIS mode and OSPF mode)

tunnel destination mesh-group

MSDP

Unsupported Privileged EXEC Commands

show access-expression

show exception

show location

show pm LINE

show smf [interface-id]

show subscriber-policy [policy-number]

show template [template-name]

Unsupported Global Configuration Commands

ip msdp default-peer ip-address | name [prefix-list list] (Because BGP/MBGP is not supported, use the ip msdp peer command instead of this command.)

QoS

Unsupported Policy-Map Configuration Command

class class-default where class-default is the class-map-name.

RADIUS

Unsupported Global Configuration Commands

aaa nas port extended

aaa authentication feature default enable

aaa authentication feature default line

authentication command bounce-port ignore

authentication command disable-port ignore

radius-server attribute nas-port

radius-server configure

radius-server extended-portnames

SNMP

Unsupported Global Configuration Commands

snmp-server enable informs

snmp-server enable traps flash insertion

snmp-server enable traps flash removal

snmp-server ifindex persist

logging discriminator discr-name [[facility] [mnemonics] [msg-body] {drops string | includes string}] [severity {drops sev-num | includes sev-num}] [rate-limit msglimit]

logging buffered discriminator

Spanning Tree

Unsupported Global Configuration Commands

spanning-tree etherchannel guard misconfig

spanning-tree pathcost method {long | short}

Unsupported Interface Configuration Command

spanning-tree stack-port

Virtual Forwarding Infrastructure (VFI)

Unsupported Global Configuration Commands

l2 vfi vfi-name manual

All VFI configuration mode commands

Unsupported Privileged EXEC Commands

debug vfi

show vfi

VLAN

Unsupported vlan-config Command

private-vlan

Unsupported Privileged EXEC Command

show running-config vlan

Unsupported User EXEC Command

show vlan ifindex

VTP

Unsupported Privileged EXEC Command

vtp {password password | pruning | version number} private-vlan

Note This command has been replaced by the vtp global configuration command.

	Catalyst 3750 Metro Switch Software Configuration Guide, 12.2(58)SE
	Unsupported Commands in Cisco IOS Release 12.2(58)SE
Catalyst 3750 Metro Switch Software Configuration Guide, 12.2(58)SE Index Preface Overview Using the Command-Line Interface Assigning the Switch IP Address and Default Gateway Configuring Cisco IOS Configuration Engine Administering the Switch Configuring SDM Templates Configuring Switch-Based Authentication Configuring IEEE 802.1x Port-Based Authentication Configuring Interface Characteristics Configuring Smartports Macros Configuring VLANs Configuring VTP Configuring Private VLANs Configuring Voice VLAN Configuring IEEE 802.1Q and Layer 2 Protocol Tunneling Configuring STP Configuring MSTP Configuring Optional Spanning-Tree Features Configuring Resilient Ethernet Protocol Configuring Flex Links and the MAC Address-Table Move Update Feature Configuring DHCP Features and IP Source Guard Configuring Dynamic ARP Inspection Configuring IGMP Snooping and MVR Configuring Port-Based Traffic Control Configuring CDP Configuring LLDP and LLDP-MED Configuring UDLD Configuring SPAN and RSPAN Configuring RMON Configuring System Message Logging Configuring SNMP Configuring Embedded Event Manager Configuring Network Security with ACLs Configuring QoS Configuring EtherChannels and Link State Tracking Configuring IP Unicast Routing Configuring IPv6 Unicast Routing Configuring IPv6 MLD Snooping Configuring IPv6 ACLs Configuring HSRP, VRRP, and GLBP Configuring Cisco IOS IP SLAs Operations Configuring Enhanced Object Tracking Configuring Ethernet CFM, E-LMI, and OAM Configuring MPLS, MPLS OAM, MPLS VPN, and EoMPLS Configuring IP Multicast Routing Configuring MSDP Configuring Fallback Bridging Troubleshooting Working with the Cisco IOS File System, Configuration Files, and Software Images Unsupported Commands in Cisco IOS Release 12.2(58)SE	Download this chapter Unsupported Commands in Cisco IOS Release 12.2(58)SE Download the complete book Catalyst 3750 Metro Switch Software Configuration Guide, Release 12.2(58)SE (PDF - 8 MB) Feedback Table Of Contents Unsupported Commands in Cisco IOS Release12.2(58)SE Access Control Lists Unsupported Privileged EXEC Commands Unsupported Global Configuration Commands ARP Unsupported Global Configuration Commands Unsupported Interface Configuration Commands Boot Loader Commands Unsupported User EXEC Command Unsupported Global Configuration Command CGMP Unsupported Privileged EXEC Command Unsupported Interface Configuration Commands Debug Unsupported Privileged EXEC Commands Embedded Event Manager Unsupported Privileged EXEC Commands Unsupported Global Configuration Commands Unsupported Commands in Applet Configuration Mode Embedded Syslog Manager Unsupported Global Configuration Commands Unsupported Privileged EXEC Commands FallBack Bridging Unsupported Privileged EXEC Commands Unsupported Global Configuration Commands Unsupported Interface Configuration Commands HSRP Unsupported Global Configuration Commands Unsupported Interface Configuration Commands IEEE 802.1ad Unsupported Interface Configuration Commands IEEE 802.1x Unsupported Global Configuration Command Unsupported Interface Configuration Commands IGMP Snooping Unsupported Global Configuration Commands Interfaces Unsupported Privileged EXEC Command Unsupported Global Configuration Command Unsupported Interface Configuration Commands IP Multicast Routing Unsupported Privileged EXEC Commands Unsupported Global Configuration Commands Unsupported Interface Configuration Commands IP Unicast Routing Unsupported Privileged EXEC or User EXEC Commands Unsupported Global Configuration Commands Unsupported Interface Configuration Commands Unsupported BGP Router Configuration Commands Unsupported Route Map Commands Miscellaneous Unsupported User EXEC Commands Unsupported Privileged EXEC Command Unsupported User EXEC Command Unsupported Global Configuration Commands MPLS Unsupported Privileged EXEC or User EXEC Commands Unsupported Global Configuration Commands Unsupported Interface Configuration Commands Physical Interfaces Tunnel Interfaces Unsupported Routing Commands MSDP Unsupported Privileged EXEC Commands Unsupported Global Configuration Commands QoS Unsupported Policy-Map Configuration Command RADIUS Unsupported Global Configuration Commands SNMP Unsupported Global Configuration Commands Spanning Tree Unsupported Global Configuration Commands Unsupported Interface Configuration Command Virtual Forwarding Infrastructure (VFI) Unsupported Global Configuration Commands Unsupported Privileged EXEC Commands VLAN Unsupported vlan-config Command Unsupported Privileged EXEC Command Unsupported User EXEC Command VTP Unsupported Privileged EXEC Command Unsupported Commands in Cisco IOS Release12.2(58)SE This appendix lists some of the command-line interface (CLI) commands that are displayed when you enter the question mark (?) at the Catalyst 3750 Metro switch prompt but are not supported in this release, either because they are not tested, or because of Catalyst 3750 Metro switch hardware limitations. This is not a complete list. The unsupported commands are listed by software feature and command mode. Access Control Lists Unsupported Privileged EXEC Commands access-enable [host] [timeout minutes] access-template [access-list-number \| name] [dynamic-name] [source] [destination] [timeout minutes] clear access-template [access-list-number \| name] [dynamic-name] [source] [destination]. Unsupported Global Configuration Commands access-list rate-limit acl-index {precedence \| mask prec-mask} access-list dynamic extended ARP Unsupported Global Configuration Commands arp ip-address hardware-address smds arp ip-address hardware-address srp-a arp ip-address hardware-address srp-b ip arp track Unsupported Interface Configuration Commands arp probe ip probe proxy Boot Loader Commands Unsupported User EXEC Command verify Unsupported Global Configuration Command boot buffersize CGMP Unsupported Privileged EXEC Command clear ip cgmp Unsupported Interface Configuration Commands ip cgmp Debug Unsupported Privileged EXEC Commands debug cluster debug platform cli-redirection main debug platform configuration debug platform ipc debug platform led stack Embedded Event Manager Unsupported Privileged EXEC Commands event manager update user policy [policy-filename \| group [group name expression] ] \| repository [url location] Parameters are not supported for this command: event manager run [policy name] \|<parameter1>\|... <parameter15>\| Unsupported Global Configuration Commands no event manager directory user repository [url location ] event manager applet [applet-name] maxrun Unsupported Commands in Applet Configuration Mode no event interface name [interface-name] parameter [counter-name] entry-val [entry counter value] entry-op {gt\|ge\|eq\|ne\|lt\|le} [entry-type {increment \| rate \| value] [exit-val [exit value] exit-op {gt\|ge\|eq\|ne\|lt\|le} exit-type {increment \| rate \| value}][average-factor <average-factor-value>] no trigger tag Embedded Syslog Manager Unsupported Global Configuration Commands All Unsupported Privileged EXEC Commands All FallBack Bridging Unsupported Privileged EXEC Commands clear bridge [bridge-group] multicast [router-ports \| groups \| counts] [group-address] [interface-unit] [counts] clear vlan statistics show bridge [bridge-group] circuit-group [circuit-group] [src-mac-address] [dst-mac-address] show bridge [bridge-group] multicast [router-ports \| groups] [group-address] show bridge vlan show interfaces crb show interfaces {ethernet \| fastethernet} [interface \| slot/port] irb show subscriber-policy range Unsupported Global Configuration Commands bridge bridge-group acquire bridge bridge-group address mac-address {forward \| discard} [interface-id] bridge bridge-group aging-time seconds bridge bridge-group bitswap_l3_addresses bridge bridge-group bridge ip bridge bridge-group circuit-group circuit-group pause milliseconds bridge bridge-group circuit-group circuit-group source-based bridge cmf bridge crb bridge bridge-group domain domain-name bridge irb bridge bridge-group mac-address-table limit number bridge bridge-group multicast-source bridge bridge-group protocol dec bridge bridge-group route protocol bridge bridge-group subscriber policy policy subscriber-policy policy [[no \| default] packet [permit \| deny]] Unsupported Interface Configuration Commands bridge-group bridge-group cbus-bridging bridge-group bridge-group circuit-group circuit-number bridge-group bridge-group input-address-list access-list-number bridge-group bridge-group input-lat-service-deny group-list bridge-group bridge-group input-lat-service-permit group-list bridge-group bridge-group input-lsap-list access-list-number bridge-group bridge-group input-pattern-list access-list-number bridge-group bridge-group input-type-list access-list-number bridge-group bridge-group lat-compression bridge-group bridge-group output-address-list access-list-number bridge-group bridge-group output-lat-service-deny group-list bridge-group bridge-group output-lat-service-permit group-list bridge-group bridge-group output-lsap-list access-list-number bridge-group bridge-group output-pattern-list access-list-number bridge-group bridge-group output-type-list access-list-number bridge-group bridge-group sse bridge-group bridge-group subscriber-loop-control bridge-group bridge-group subscriber-trunk bridge bridge-group lat-service-filtering frame-relay map bridge dlci broadcast interface bvi bridge-group x25 map bridge x.121-address broadcast [options-keywords] HSRP Unsupported Global Configuration Commands interface Async interface BVI interface Dialer interface Group-Async interface Lex interface Multilink interface Virtual-Template interface Virtual-Tokenring Unsupported Interface Configuration Commands mtu standby mac-refresh seconds standby use-bia IEEE 802.1ad Unsupported Interface Configuration Commands ethernet dot1ad isolate IEEE 802.1x Unsupported Global Configuration Command dot1x critical Unsupported Interface Configuration Commands dot1x control-direction dot1x critical dot1x host-mode multi-domain Note Entering this command can put the port in error-disabled state. dot1x mac-auth-bypass [eap \| timeout activity {value}] interface configuration command Note The switch does not support IEEE 802.1x MAC authentication bypass. dot1x pae dot1x host-mode multi-domain IGMP Snooping Unsupported Global Configuration Commands ip igmp snooping report-suppression ip igmp snooping source-only-learning ip igmp snooping tcn Interfaces Unsupported Privileged EXEC Command show interfaces [interface-id \| vlan vlan-id] [crb \| fair-queue \| irb \| mac-accounting \| precedence \| irb \| random-detect \| rate-limit \| shape] Unsupported Global Configuration Command interface tunnel Unsupported Interface Configuration Commands bandwidth {bandwidth-kbps \| percent percent} random-detect [dscp-based \| precedence-based] random-detect dscp dscp min-threshold max-threshold mark-prob-denominator random-detect exponential-weighting-constant weight random-detect precedence ip-precedence min-threshold max-threshold mark-prob-denominator switchport broadcast level switchport multicast level switchport unicast level Note The switchport broadcast, switchport multicast, and switchport unicast commands have been replaced by the storm-control {broadcast \| multicast \| unicast} level level [.level] interface configuration command. transmit-interface type number IP Multicast Routing Unsupported Privileged EXEC Commands clear ip rtp header-compression [type number] The debug ip packet command displays packets received by the switch CPU. It does not display packets that are hardware-switched. The debug ip mcache command affects packets received by the switch CPU. It does not display packets that are hardware-switched. The debug ip mpacket [detail] [access-list-number [group-name-or-address] command affects only packets received by the switch CPU. Because most multicast packets are hardware-switched, use this command only when you know that the route will forward the packet to the CPU. debug ip pim atm show frame-relay ip rtp header-compression [interface type number] The show ip mcache command displays entries in the cache for those packets that are sent to the switch CPU. Because most multicast packets are switched in hardware without CPU involvement, you can use this command, but multicast packet information is not displayed. The show ip mpacket commands are supported but are only useful for packets received at the switch CPU. If the route is hardware-switched, the command has no effect because the CPU does not receive the packet and cannot display it. show ip pim vc [group-address \| name] [type number] show ip rtp header-compression [type number] [detail] Unsupported Global Configuration Commands ip pim accept-rp {address \| auto-rp} [group-access-list-number] ip pim message-interval seconds ip pim register-rate-limit Unsupported Interface Configuration Commands frame-relay ip rtp header-compression [active \| passive] frame-relay map ip ip-address dlci [broadcast] compress frame-relay map ip ip-address dlci rtp header-compression [active \| passive] ip igmp helper-address ip-address ip multicast helper-map {group-address \| broadcast} {broadcast-address \| multicast-address} extended-access-list-number ip multicast rate-limit {in \| out} [video \| whiteboard] [group-list access-list] [source-list access-list] kbps ip multicast ttl-threshold ttl-value (instead, use the ip multicast boundary access-list-number interface configuration command) ip multicast use-functional ip pim minimum-vc-rate pps ip pim multipoint-signalling ip pim nbma-mode ip pim vc-count number ip rtp compression-connections number ip rtp header-compression [passive] IP Unicast Routing Unsupported Privileged EXEC or User EXEC Commands clear ip accounting [checkpoint] clear ip bgp address flap-statistics clear ip bgp prefix-list show cef [drop \| not-cef-switched] show ip accounting [checkpoint] [output-packets \| access-violations] show ip bgp dampened-paths show ip bgp inconsistent-as show ip bgp regexp regular expression Unsupported Global Configuration Commands ip arp track ip accounting-list ip-address wildcard ip accounting-transits count ip cef accounting [per-prefix] [non-recursive] ip cef traffic-statistics [load-interval seconds] [update-rate seconds]] ip flow-aggregation ip flow-cache ip flow-export ip gratuitous-arps ip local ip reflexive-list ip route destip mask next-hop track object-num router egp router-isis router iso-igrp router mobile router odr router static Unsupported Interface Configuration Commands dampening ip accounting ip accounting precedence {input \| output} ip load-sharing [per-packet] ip mtu bytes ip ospf dead-interval minimal hello-multiplier multiplier ip route-cache ip verify ip unnumbered type number All ip security commands Unsupported BGP Router Configuration Commands default-information originate neighbor advertise-map neighbor allowas-in neighbor default-originate neighbor description network backdoor table-map Unsupported Route Map Commands match route-type for policy-based routing (PBR) set automatic-tag set dampening half-life reuse suppress max-suppress-time set default interface interface-id [interface-id.....] set interface interface-id [interface-id.....] set ip default next-hop ip-address [ip-address.....] set ip destination ip-address mask set ip next-hop verify-availability set ip precedence value set ip qos-group set metric-type internal set origin set metric-type internal Miscellaneous Unsupported User EXEC Commands verify Unsupported Privileged EXEC Command file verify auto Unsupported User EXEC Command show mac-address-table multicast Unsupported Global Configuration Commands errdisable detect cause dhcp-rate-limit errdisable recovery cause dhcp-rate-limit errdisable recovery cause unicast flood memory reserve critical MPLS Unsupported Privileged EXEC or User EXEC Commands debug ip rsvp hello [bfd \| detail \| stats] debug ip rsvp sso debug mpls traffic-eng exp debug mpls traffic-eng forwarding-adjacency debug mpls traffic-eng ha show ip rsvp fast-route show ip rsvp hello [instance \| statistics] show mpls traffic-eng exp show mpls traffic-eng forwarding-adjacency Unsupported Global Configuration Commands ip rsvp signalling hello {bfd \| graceful-restart) mpls traffic-eng auto-bw mpls traffic-eng lsp Unsupported Interface Configuration Commands Physical Interfaces ip rsvp bandwidth {mam \| rdm} ip rsvp signalling hello [bfd \| dscp \| fast-reroute \| graceful-restart \| refresh \| reroute] mpls traffic-eng srlg Tunnel Interfaces tunnel mpls traffic-eng auto-bw tunnel mpls traffic-eng backup-bw tunnel mpls traffic-eng exp tunnel mpls traffic-eng exp-bundle tunnel mpls traffic-eng forwarding-adjacency tunnel mpls traffic-eng path-option dynamic attributes tunnel mpls traffic-eng path-option explicit name attributes tunnel mpls traffic-eng path-selection Unsupported Routing Commands interface auto-template mpsl traffic-eng mesh-group (ISIS mode) mpsl traffic-eng multicast-intact (ISIS mode and OSPF mode) tunnel destination mesh-group MSDP Unsupported Privileged EXEC Commands show access-expression show exception show location show pm LINE show smf [interface-id] show subscriber-policy [policy-number] show template [template-name] Unsupported Global Configuration Commands ip msdp default-peer ip-address \| name [prefix-list list] (Because BGP/MBGP is not supported, use the ip msdp peer command instead of this command.) QoS Unsupported Policy-Map Configuration Command class class-default where class-default is the class-map-name. RADIUS Unsupported Global Configuration Commands aaa nas port extended aaa authentication feature default enable aaa authentication feature default line authentication command bounce-port ignore authentication command disable-port ignore radius-server attribute nas-port radius-server configure radius-server extended-portnames SNMP Unsupported Global Configuration Commands snmp-server enable informs snmp-server enable traps flash insertion snmp-server enable traps flash removal snmp-server ifindex persist logging discriminator discr-name [[facility] [mnemonics] [msg-body] {drops string \| includes string}] [severity {drops sev-num \| includes sev-num}] [rate-limit msglimit] logging buffered discriminator Spanning Tree Unsupported Global Configuration Commands spanning-tree etherchannel guard misconfig spanning-tree pathcost method {long \| short} Unsupported Interface Configuration Command spanning-tree stack-port Virtual Forwarding Infrastructure (VFI) Unsupported Global Configuration Commands l2 vfi vfi-name manual All VFI configuration mode commands Unsupported Privileged EXEC Commands debug vfi show vfi VLAN Unsupported vlan-config Command private-vlan Unsupported Privileged EXEC Command show running-config vlan Unsupported User EXEC Command show vlan ifindex VTP Unsupported Privileged EXEC Command vtp {password password \| pruning \| version number} private-vlan Note This command has been replaced by the vtp global configuration command.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks