- Overview of Release Notes for Cisco TrustSec General Deployability Releases
- Release Notes for Cisco TrustSec 3.0 General Deployability 2013 Release
- Release Notes for Cisco TrustSec 2.1 General Deployability 2012 Release
- Release Notes for Cisco TrustSec 2.0 General Deployability 2011 Release
- Release Notes for Cisco TrustSec 1.99 General Deployability 2011 Release
- Release Notes for Cisco TrustSec 1.0 General Deployability 2010 Release
Release Notes for Cisco TrustSec 3.0
General Deployability 2013 Release
The most current version of this document is available at the following URL:
http://www.cisco.com/en/US/docs/switches/lan/trustsec/release/notes/rn_cts_crossplat.html
Contents
This document contains the following sections:
•
New Features, Supported Hardware and Software
•
Cisco TrustSec How-To Documents
•
Caveats - TrustSec 3.0 General Availability 2013 Release
New Features, Supported Hardware and Software
For a complete table of features, platforms, and IOS images supported in the TrustSec 3.0 release, see the Cisco TrustSec 3.0 Product Bulletin at the following URL:
http://www.cisco.com/en/US/netsol/ns1051/index.html
See also, the Matrix of Cisco TrustSec-Enabled Infrastructure at the following URL:
http://www.cisco.com/en/US/solutions/ns170/ns896/ns1051/trustsec_matrix.html
Cisco TrustSec How-To Documents
TrustSec "How-to" Configuration Guides are classified in the following sections:
•
Section 1: Introduction, BootStrapping and Universal Configurations
•
Section 2: Deployment Modes
•
Section 3: Profiling, Using Cisco ISE and BYOD
•
Section 4: Security Group Tagging (SGA) and More
Find all Cisco TrustSec "How-To" documents at the following URL:
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html
Caveats - TrustSec 3.0 General Availability 2013 Release
Open Caveats
Cisco Catalyst 3750-X Series Switches
Release notes for Catalyst 3750-X Series switches:
http://www.cisco.com/en/US/products/ps10745/prod_release_notes_list.html
|
|
|
|
|
|---|---|---|---|
CTS |
15.0(2)SE |
RBACL list is requested even if SG gen-id didn't change. |
|
CTS |
15.0(2)SE |
No peer policy requested when link is CTS Manual. |
Cisco Catalyst 4500 Series Switches
Release notes for Catalyst 4500 Series switches:
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_notes_list.html
|
|
|
|
|
|---|---|---|---|
CTS |
IOS XE 3.3.0SG |
CTS link is not established when cts manual is set a with policy dynamic identity. |
Cisco Catalyst 6500 Series Switches
Release notes for Catalyst 6500 Series switches:
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_notes_list.html
Cisco Nexus 1000V Series Switches
Release notes for Nexus 1000V Series switches:
http://www.cisco.com/en/US/products/ps9902/prod_release_notes_list.html
Cisco Nexus 7000 Series Switches
Release notes for Nexus 7000 Series switches:
http://www.cisco.com/en/US/products/ps9402/prod_release_notes_list.html
|
|
|
|
|
|---|---|---|---|
CTS |
6.1 |
IP to SGT mapping learned through SXP should be preferred to CLI configuration. |
Related Documentation
Cisco IOS Software Documentation
|
|
|
|---|---|
Router-based SXP configuration |
|
802.1x; SXP |
Feedback