Release Notes for Cisco TrustSec General Availability Releases
Release Notes for Cisco TrustSec 1.0 General Deployability 2010 Release
Downloads: This chapterpdf (PDF - 365.0KB) | Feedback

Release Notes for Cisco TrustSec 1.0 General Deployability 2010 Release

Table Of Contents

Release Notes for Cisco TrustSec 1.0
General Deployability 2010 Release

Contents

Introduction

Supported Hardware and Software

Caveats

Open Caveats - Trustsec 1.0 General Availability 2010 Release

Cisco Secure Access Control System (ACS)

Cisco Nexus 7000 Series Switches

Resolved Caveats

Cisco Catalyst 6500 Series Switches

Related Documentation

Release-Specific Documents

Platform-Specific Documents

Cisco IOS Software Documentation Set


Release Notes for Cisco TrustSec 1.0
General Deployability 2010 Release


Published: June 9, 2010

The most current version of this document is available on Cisco.com at the following URL:

www.cisco.com/en/US/docs/switches/lan/trustsec/release/notes/rn_cts_crossplat.html

Contents

This document contains the following sections:

Introduction

Caveats

Related Documentation

Introduction

Information on the Cisco TrustSec Solution, including overviews, datasheets, and case studies, is available at the following URL:
http://www.cisco.com/en/US/netsol/ns1051/index.html

The Cisco TrustSec Switch Configuration Guide is located at the following URL:
http://www.cisco.com/en/US/docs/switches/lan/trustsec/configuration/guide/trustsec.html

For an explanation of Cisco TrustSec features, see Table 1 in the "Overview of Release Notes for Cisco TrustSec General Deployability Releases"

Supported Hardware and Software

For a complete table of features, platforms, IOS images, and servers supported for the TrustSec 1.0 release, please see the Platform Support Matrix in the Cisco TrustSec 1.0 Product Bulletin at the following URL:

http://www.cisco.com/en/US/solutions/collateral/ns170/ns896/ns1051/product_bulletin_c25-616556.html

Caveats

Open Caveats - Trustsec 1.0 General Availability 2010 Release

Cisco Secure Access Control System (ACS)

CSCte75993—ACS sends the same server list name and gen-ID when NAD switches ACS

Symptom: A Catalyst 6500 device will initially attempt to access a wrong ACS server, and later will continue to show that wrong server as its primary destination for TrustSec RADIUS services.

Conditions: If the server config is modified to point to a different ACS, the device is not able to recognize that a new server list has been updated from the new server:

Device is configured with Server A

Env-data download from Server A returns server list named "ACSServerList1" with Server A in it

Device's private list now contains Server A

Server A is brought down

Device config changed - Server A is replaced with Server B

Server A is marked DEAD on the device's private list

Env-data download refresh sent to Server B (public list)

Server B returns same server list named "ACSServerList1" with same gen-ID

Since server list name is identical and gen-ID did not change, device sees no need to download the server info and never acquires info for Server B

Device ends up with Server A in its private list

The Catalyst 6500 gives priority to private server list over the public list, so it will attempt to use it without knowing that it is the wrong one.

Workaround: The Catalyst 6500 does have server-keep-alive test where the device will eventually detect that the private server is DEAD, it will switch to the correct configured RADIUS server, but in the "show" command, the wrong private server will remain.

In order to work-around the wrong configuration in the private list, the user should remove the Private server list and invoke a new Environment Data request.

Cisco Nexus 7000 Series Switches

Identifier
Technology
Description

CSCso34820

CTS

CTS: "show cts interface" o/p shows interfaces when module is not Online

CSCsq41219

CTS

Match IOS priorities for IP-SGT maps learnt via various methods

CSCsu54644

CTS

Need to accept multiple RBACLs per SGT, DGT cell downloaded from ACS

CSCsv67814

CTS

CTS SGT : Inconsistent programming of IP-SGT map with SVIs

CSCsw30353

CTS

CTS : `ERROR: CTS is not supported on this interface'

CSCtg07773

CTS

Client \"sal\": skipping delete rnh - not found observed when toggle sxp

Requires Caveat in Release Note documents, unless there is a quick fix

CSCtg10086

CTS

cts timeout in respond to ethpm message


Resolved Caveats

Cisco Catalyst 6500 Series Switches

Identifier
Technology
Description

CSCsz23686

CTS

"cts dot1x" command configured incorrectly on the interfaces.

CSCsz93221

CTS

During link-flap error recovery, active Sup5 detected data structure err

Symptom: A Cisco switch may report the following error message:

%UTIL-3-TREE: Data structure error--attempt to remove an unthreaded node from a tree

Conditions: This issue is seen when dot1x is configured on the device.

Workaround: There is no known workaround.

CSCta49126

CTS

TB on W2.2 image with W2.clix(IPv6Learning Capable) having SXP conn. b/w

CSCtb40877

CTS

Auth-mgr does not remove the auth session on removing cts dot1x from int

CSCtc12860

CTS

config gets applied in interface range sub-mode @'syntax check mode'

CSCtg23769

CTS

PAC does not get provisioned if switch has a very old PAC


Related Documentation

Release-Specific Documents

Release-Specific Document Title
TrustSec Topics

Cisco TrustSec Switch Configuration Guide

TrustSec feature configurations for Cisco Catalyst series switches

System error messages

Release Notes for Cisco TrustSec 1.0 General Availability 2010 Release

Open and resolved caveats

Current hardware support status


Platform-Specific Documents

Platform-specifc Document Title
TrustSec Topics

Catalyst 3000 Series Switches

Release Notes for Catalyst 3560 and 3750 Switches

Open and resolved Caveats

Catalyst 3560 Software Configuration Guide, Release 12.2(52)SE

802.1x configuration procedures

Catalyst 3750 Switch Software Configuration Guide, 12.2(52)SE

Catalyst 4500 Series Switches

Release Note for the Catalyst 4500 Series Switch, Cisco IOS, 12.2EW and 12.2SG

Open and resolved caveats

Catalyst 4500 Series Switch Software Configuration Guide, 12.2(53)SG

802.1x configuration procedures

Catalyst 6500 Series Switches

Catalyst 6500 Series Release Notes for Cisco IOS Release 12.2(33)SXH and Later Releases

Open and resolved caveats

Catalyst 6500 Release 12.2SXH and Later Software Configuration Guide

802.1x configuration procedures

Nexus 7000 Series Switches

Cisco Nexus 7000 Series Switches Release Notes

Open and resolved caveats

Cisco Nexus 7000 Series Switches Configuration Guides

TrustSec feature configurations for Cisco Nexus 7000 series switches, Release 4.1 and more recent

802.1X configuration procedures

Cisco Secure Access Control System

Cisco Secure Access Control System Release Notes

Open and Resolved caveats

Cisco Secure Access Control System End-User Guides

TrustSec configurations for Cisco ACS 5.1 and more recent


Cisco IOS Software Documentation Set

Cisco IOS Document Title
TrustSec Topics

Cisco IOS Security Configuration Guide: Securing User Services

802.1x configuration procedures

Cisco IOS Security Command Reference

Syntax and usage guidelines for TrustSec-specific and related commands