Table Of Contents

Troubleshooting EnergyWise

Using CLI Commands

Verifying the Power Usage

Troubleshooting EnergyWise

---

•Using CLI Commands

•Verifying the Power Usage

Using CLI Commands

Table 4-1 show Privileged EXEC Commands 

Command	Purpose
show energywise	Displays the settings and status for the entity.
show energywise children show energywise children provisioned	Displays the status of the connected end points. Displays a summary of the EnergyWise information for the switch and the connected end points.
show energywise domain	Displays the domain to which the entity belongs.
show energywise events	Display the last ten events (messages) sent to other entities in the domain.
show energywise neighbors	Displays the neighbor tables for the switch.
show energywise recurrences	Displays the EnergyWise settings and status for recurrence.
show energywise statistics	Displays the counters for events and errors.
show energywise usage	Displays the actual power usage on the entity.
show energywise version	Displays the EnergyWise version.
show version	Displays the software version.
show power inline	Displays the PoE status.
show cdp neighbors	Displays the neighbors discovered by CDP.

For more information about the commands, see Chapter 3, "EnergyWise CLI Commands," and the platform-specific command references on Cisco.com.

Verifying the Power Usage

This example shows that the Cisco 7960 IP Phone uses 6.3 W and that the Cisco 7970G IP Phone uses 10.3 W.

Switch# show energywise usage children

Interface   Name            Usage      Caliber

---------   ----            -----      -------

            Switch          144.0 (W)  max

Gi0/1       Gi0.1           6.3 (W)    trusted

Gi0/2       Gi0.2           10.3 (W)   trusted