Table Of Contents
Numerics - A - C - D - E - F - I - J - L - M - N - O - P - R - S - T - U - W - X -
Index
Numerics
10/100/1000 ports
connecting to 27
described 3
description 3
recommended cables 27
10-Gigabit Ethernet module slots described 4
A
adapter pinouts, terminal
RJ-45-to-DB-25 8
RJ-45-to-DB-9 8
auto-MDIX 1
autonegotiation
default setting 27
troubleshooting 4
C
cable lengths 4
cables
connecting Stackwise Plus cables 21
crossover
connecting to 2
four twisted-pair pinout, 1000BASE-T ports 7
identifying 8
two twisted-pair pinout, 10/100 ports 6
recommended 27
SFP module 6
cables (continued)
stacking 17
straight-through
connecting to 2
four twisted-pair pinout, 1000BASE-T ports 7
two twisted-pair pinout 6
X2 transceiver module 4
cabling
auto-MDIX 1
pinouts 6
See also connectors and cables
StackWise Plus cables 8
cautions viii
Chassis Management Controller
Cisco IOS command-line interface 9, 27
Cisco IP Phones, connecting to 27
Cisco TwinGig Converter Module
described 4
installing 22
Class 1 laser warning 2
CMC
connecting through the console port 9
defined 1
module location 3
to access the CLI 15
command-line interface
configuring the switch using the device manager 13
connecting
to console port 4
connection procedures 27
connectors and cables
console port 3
conventions, document viii
crossover cable
identifying 8
pinout for four twisted-pair, 1000BASE-T ports 7
D
Dell Modular Server Chassis architecture overview 3
device manager
how to access 27
using to configure the switch 13
using to manage switch 8
diagnosing problems 1
disposal of product warning 2
document conventions viii
duplex
default setting 27
troubleshooting 4
E
electrical codes warning 2
electrical noise, avoiding 4
Ethernet and fiber-optic cable troubleshooting 2
Ethernet cable shielding warning 2
Ethernet port connections warning 2
Express Setup 13
F
front panel
10/100/1000 Ethernet ports 3
10/100 /1000 ports 3
10-Gigabit Ethernet module slots 4
I
installation guidelines 4
installation instructions warning 2
installing
Cisco TwinGig Converter Modules 22
X2 transceiver modules 22
J
jewelry removal warning 2
L
LEDs
port 6
POST results 1
stack 5
stack master 5
stack member 6
system 5
system status ID/LED 6
lightning activity warning 2
link status troubleshooting 2
M
managing the switch module
using the CMC 9
N
noise, electrical 4
O
overheating prevention warning 1
P
pinouts
adapters 8
console port 9
crossover cable 8
crossover cables for four twisted-pair, 1000BASE-T ports 7
crossover cables for two twisted-pair 10/100 ports 6
RJ-45-to-DB-25 terminal adapter 9
RJ-45-to-DB-9 terminal adapter 8
SFP module ports 3
straight-through cables
four twisted-pair 1000BASE-T ports 7
two twisted-pair 6
port and interface troubleshooting 3
port LEDs 6
ports
10/100/1000
connecting to 27
described 3
recommended cables 27
descriptions 2
ports (continued)
numbering of 10/100/1000 3
switch console port 3
POST
LEDs 1
running at power on 1
procedures, connection 27
publications, related viii
R
RJ-45 connector, console port 4
S
safety warnings 1
serial number location 5
server chassis
description 3
I/O module bays 3
SFP modules
bale-clasp latch removal 26
cables 6
connectors 3
supported 4
software activation 1
software switch management 8
specifications 1
speed
default setting 27
troubleshooting 4
stacking
cables 17
caution 17
stacking (continued)
connecting cables 21
guidelines 17
overview 17
stack LED 5
stack master LED 5
stack member LED 6
StackWise Plus ports 8
straight-through cable
pinout
four twisted-pair 1000BASE-T ports 7
two twisted-pair 10/100 ports 6
switch models 1
switch stack caution 17
system LED 5
system status ID LED 6
T
technical specifications 1
Telnet, and accessing the CLI 9, 27
temperature, operating 1
trained and qualified personnel warning 2
troubleshooting
bad or damaged cable 2
connection problems 2
diagnosing problems 1
Ethernet and fiber-optic cables 2
link status 2
ping end device 3
port and interface settings 3
POST 1
spanning-tree loops 3
speed, duplex, and autonegotiation 4
switch performance 4
TwinGig Converter Module
See Cisco TwinGig Converter Module
U
using the CLI to manage the switch module 9, 27
W
warnings
Class 1 laser 2
defined viii
disposal of product 2
electrical codes 2
Ethernet cable shielding 2
Ethernet port connections 2
installation 1
installation instructions 2
jewelry removal 2
lightning activity 2
overheating prevention 1
trained and qualified personnel 2
X
X2 transceiver modules
described 4
installing 22
removing 24