Cisco Identity Services Engine Software Version 1.0

Available Languages

Download Options

PDF (158.7 KB)
View with Adobe Reader on a variety of devices

Updated:March 31, 2015

Document ID:1549306640738168

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco announces the end-of-life dates for the Cisco Identity Services Engine (ISE) Software Version 1.0 software.

Software maintenance support for 1.0 Software release ends on April 6, 2015. No patches or maintenance releases will be provided for ISE 1.0 SW after that date.

Software maintenance and application software support requires an active service contract. It will not be possible to purchase or renew Software Application Support (SAS) contract for ISE 1.0 release after April 30, 2015.

Product Migration Options

Customers are encouraged to upgrade to the latest ISE software version which is ISE 1.3 at the date of this announcement. ISE BASE, Wireless and ADV licenses installed with ISE 1.0 Software will be also active after the upgrade without loss of any functionality. If customers need additional end-points for Wireless or ADV licenses after upgrade to ISE 1.3 or later version, they need to purchase ISE Mobility or APEX license, respectively.

For More Information

For More Information on the Cisco Identity Services Engine, visit http://www.cisco.com/go/ise, or contact your local account representative.

Contact Cisco

Was this Document Helpful?

Feedback