Table Of Contents
Preface
Objectives
Document Revision History
Organization
Related Documentation
Cisco ASR 1000 Series Routers Documentation
Conventions
Obtaining Documentation and Submitting a Service Request
Preface
Revised: March 28, 2012, OL-16506-13
This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:
•
Objectives
•Document Revision History
•Organization
•Related Documentation
•Conventions
•Obtaining Documentation and Submitting a Service Request
Objectives
This document provides an overview of software functionality that is specific to the Cisco ASR 1000 Series Aggregation Services Routers. It is not intended as a comprehensive guide to all of the software features that can be run using the Cisco ASR 1000 Series Routers, but only the software aspects that are specific to these routers.
For information on general software features that are also available on the Cisco ASR 1000 Series Routers, see the Cisco IOS XE technology guide for that specific software feature.
Document Revision History
The Document Revision History records technical changes to this document. The table shows the Cisco IOS XE software release number and document revision number for the change, the date of the change, and a brief summary of the change.
Release No.
|
Date
|
Change Summary
|
IOS XE 3.9.0
|
March 28, 2013
|
•Added Multiple Flows Tunnel section in the iWAG on ASR 1000 Series Aggregation Services Routers for Service Provider WiFi Offload chapter.
•Added new content to document UniDirectional Link Detection (UDLD) Protocol in the UniDirectional Link Detection (UDLD) Protocol chapter.
|
IOS XE 3.8.0
|
November 28, 2012
|
•Added new content to document Configuring Ethernet Over Soft GRE in the Configuring Ethernet Over Soft GRE chapter.
•Added new content to document iWAG on the Cisco ASR 1000 Series Aggregation Services Routers for Service Provider WiFi Offload in the iWAG on ASR 1000 Series Aggregation Services Routers for Service Provider WiFi Offload chapter.
•Added Minimal Disruptive Restart Process section in the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 3.7.0
|
July 25, 2012
|
•Added new content to document the Configuring Cisco Right-To-Use License in the "Configuring a Cisco Right-To-Use License" chapter.
•Added new content to the Synchronous Ethernet in the "Network Synchronization Support" chapter.
•Added new content to document the Walk-by User Support for PWLAN in ISG in the "Broadband Scalability and Performance" chapter.
•Added new content to the bridge domain interface configurations in the "Configuring Bridge Domain Interfaces" chapter.
|
IOS XE 3.6.0
|
March 30, 2012
|
•Added new content to document the Cisco License Call Home in the "Configuring Cisco License Call Home" chapter.
•Added new content to document the Frame Relay to ATM Bridged Interworking in the Configuring MPLS Layer 2 VPNs chapter.
•Added new content to document the xconnect support on GEC (VPWS) on ASR1000 in the Configuring MPLS Layer 2 VPNs chapter.
|
IOS XE 3.4.0S
|
July 25, 2011
|
•Added new content to document the Monitoring and Maintaining Multilink Frame Relay feature in the "Monitoring and Maintaining Multilink Frame Relay" chapter.
•Added new content to document In Service One-Shot Software Upgrade Procedure in the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 3.3.0S
|
March 30, 2011
|
•Added new content to document the Scalability and Performance in the "Broadband Scalability and Performance" chapter.
•Added software upgrade information for ASR 1001 chassis in the "Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router" section in "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 3.2.0S
|
November 24, 2010
|
•Added new content to document bridge domain interface configurations in the "Configuring Bridge Domain Interfaces" chapter.
•Added new content to document the Synchronous Ethernet in the "Network Synchronization Support" chapter.
|
IOS XE 3.1.0S
|
July 30, 2010
|
•Added upgrade and file package information in the "Software Packaging and Architecture" chapter.
•Added restriction regarding ISSU support in Cisco IOS XE Release 3.1S in "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 2.6
|
February 26, 2010
|
•Added support for the Call Home feature in the "Configuring Call Home" chapter.
•Moved the ISSU compatibility tables into the Release Notes for Cisco ASR 1000 Series Aggregation Services Routers document.
•Relocated other ISSU compatibility information into the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 2.5
|
December 15, 2009
|
Updated the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter with new compatibility information.
|
IOS XE 2.4
|
June 30, 2009
|
•Updated the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter with new compatibility information.
•Updated book with installation information for the new optional subpackage for the Cisco WebEx Node for ASR 1000 Series.
|
IOS XE 2.3
|
February 27, 2009
|
Updated the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter with new compatibility information.
|
IOS XE 2.2
|
November 20, 2008
|
Updated the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter with new compatibility information.
|
IOS XE 2.2
|
November 3, 2008
|
Added new content to document compatibility of different versions of Cisco IOS XE software in the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 2.2
|
October 3, 2008
|
Updated book to document ISSU procedures for Cisco IOS XE Release 2.2. Removed ISSU procedures from the "Consolidated Packages and SubPackage Management" chapter of the book and created the "Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers" chapter.
|
IOS XE 2.2
|
September 23, 2008
|
Added the "Troubleshooting Software Mismatch with ESP Board ASR1000-ESP10-N" section for the Cisco ASR 1000 Embedded Services Processor 10G Non Crypto Capable feature.
|
IOS XE 2.1
|
July 2, 2008
|
Added the "Configuring and Accessing the Web User Interface" section.
Added Appendix "Configuration Examples".
|
IOS XE 2.1
|
May 2, 2008
|
First release of the book.
|
Organization
This document contains the following chapters:
Title
|
Description
|
Software Packaging and Architecture
|
Provides an introduction to Cisco ASR 1000 Series Routers software packaging, processes, and file systems.
|
Using Cisco IOS XE Software
|
Provides an introduction to accessing the command-line interface (CLI) and using the Cisco software and related tools.
|
Console Port, Telnet, and SSH Handling
|
Provides an overview and configuration options for the handling of incoming console port, telnet, and SSH traffic on the Cisco ASR 1000 Series Routers.
|
Consolidated Packages and SubPackage Management
|
Provides information on downloading, installing, and running the software on the Cisco ASR 1000 Series Routers.
|
Software Upgrade Process
|
Provides information on ISSU compatibility and performing limited-downtime software upgrades on the Cisco ASR 1000 Series Routers.
|
High Availability Overview
|
Provides an overview of the High Availability architecture, behavior, and features on the Cisco ASR 1000 Series Routers.
|
Scalability and Performance
|
Provides information on scaling and performance on the Cisco ASR 1000 Series Routers.
|
Cisco License Call Home
|
Provides information on activating the Cisco License for Call Home feature.
|
Configuring Call Home for Cisco ASR 1000 Series Aggregation Services Routers
|
Provides information about the Call Home feature, which supports e-mail-based and web-based notification of critical system events. A versatile range of message formats are available for optimal compatibility with pager services, standard e-mail, or XML-based automated parsing applications.
|
Configuring Cisco Right-To-Use License
|
Provides information on activating the Cisco Right-To-Use License.
|
iWAG on ASR 1000 Series Aggregation Services Routers for Service Provider WiFi Offload
|
Provides information on the deployment of the Intelligent Wireless Access Gateway (iWAG) feature on the Cisco ASR 1000 Series Aggregation Services Routers that involves two main technologies: the General Packet Radio Service (GPRS) Tunneling Protocol (GTP) for connecting to the Cisco Gateway GPRS Support Node (Cisco GGSN) and the Mobile Access Gateway (MAG) using Proxy Mobile IPv6 (PMIPv6) for connecting to the Cisco Packet Data Network Gateway (PGW).
|
UniDirectional Link Detection (UDLD) Protocol
|
Provides an overview and configuration options for the UDLD protocol on the Cisco ASR 1000 Series Routers.
|
Using the Management Ethernet Interface
|
Provides an overview and configuration options for the Management Ethernet interface on the Cisco ASR 1000 Series Routers.
|
Synchronous Ethernet Support On The Cisco ASR 1000 Series Routers
|
Provides an overview and configuration options for the Synchronous Ethernet on the Cisco ASR 1000 Series Routers.
|
Configuring Ethernet Over Soft GRE
|
Provides an overview and configuration for the Generic Routing Encapsulation (GRE) is a tunneling protocol that can encapsulate a wide variety of network layer protocols inside virtual point-to-point links over an IP internetwork.
|
Configuring Bridge Domain Interfaces
|
Provides an overview of configuration options for the Bridge Domain Interface on the Cisco ASR 1000 Series Routers.
|
Monitoring and Maintaining Multilink Frame Relay
|
Provides an overview of monitoring and maintaining the Multilink Frame Relay feature for the Cisco ASR 1000 Series Routers.
|
Configuring MPLS Layer 2 VPNs
|
Provides an overview of The Frame Relay to ATM Bridged Interworking feature
|
LSM-MLDP-based MVPN Support
|
Provides information on the Label Switched Multicast (LSM) feature supports IPv4 and IPv6 multicast traffic over a Multi-Protocol Label Switching (MPLS) network.
|
Tracing and Trace Management
|
Provides an overview of tracing on the Cisco ASR 1000 Series Router, and how to manage the tracing process and files.
|
Configuring and Accessing the Web User Interface
|
Provides an overview of the Cisco ASR 1000 Series Router web user interface, and information on configuring and accessing the web user interface.
|
Related Documentation
This section refers you to other documentation that also might be useful as you configure your Cisco ASR 1000 Series Router. The documentation listed below is available online.
Cisco ASR 1000 Series Routers Documentation
The Cisco ASR 1000 Series has a documentation roadmap that provides listings to a broad range of documentation available for the Cisco ASR 1000 Series Routers. See the Cisco ASR 1000 Series Router Documentation Roadmap at:
http://cisco.com/en/US/products/ps9343/products_documentation_roadmaps_list.html
The documentation homepage for the Cisco ASR 1000 Series Routers contains a wide variety of hardware and software information for the Cisco ASR 1000 Series Routers and can be viewed at:
http://cisco.com/en/US/products/ps9343/tsd_products_support_series_home.html
The documentation homepage for Cisco IOS XE contains Cisco IOS XE technology guides and feature documentation and can be viewed at:
http://cisco.com/en/US/products/ps9587/tsd_products_support_series_home.html
For information on commands, see one of the following resources:
•Cisco IOS XE Software Command References
•Command Lookup Tool (cisco.com login required)
Conventions
This document uses the following conventions:
Convention
|
Indication
|
bold font
|
Commands and keywords and user-entered text appear in bold font.
|
italic font
|
Document titles, new or emphasized terms, and arguments for which you supply values are in italic font.
|
[ ]
|
Elements in square brackets are optional.
|
{x | y | z }
|
Required alternative keywords are grouped in braces and separated by vertical bars.
|
[ x | y | z ]
|
Optional alternative keywords are grouped in brackets and separated by vertical bars.
|
string
|
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
|
courier font
|
Terminal sessions and information the system displays appear in courier font.
|
< >
|
Nonprinting characters such as passwords are in angle brackets.
|
[ ]
|
Default responses to system prompts are in square brackets.
|
!, #
|
An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.
|
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Caution Means
reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data.
Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.
 |
Warning Means reader be warned. In this situation, you might perform an action that could result in bodily injury.
|
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Feedback
