-
Cisco 7600 Series Router Cisco IOS Command Reference, 12.1E
-
Index
-
Preface
-
Command-Line Interface
-
action to cd
-
Cisco 7600 Series Router Cisco IOS Commands
-
BRC
-
channel-group to clear catalyst6000
-
clear counters to debug callback
-
debug cca to duplex
-
erase to mls aging
-
mls exclude to pagp port-priority
-
policy-map to protocol filtering
-
rcv-queue to show bootflash
-
shutdown vlan to time-range
-
show bootvar to show ip cache
-
show ip cef to show mls asic
-
show mls cef to show qm-sp
-
show queueing to show vtp
-
title
-
udld to username
-
verify to wrr-queue bandwidth
-
wrr-queue cos-map to wrr-queue threshold
-
Acronyms
-
Acknowledgments for Open-Source Software
-
Table Of Contents
Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W -
Index
Symbols
? command 1-1
| (pipe or vertical bar)
specifying alternative patterns 1-10
Numerics
802.1Q
mapping ISL VLANs 2-756
setting trunk encapsulation characteristics 2-706
802.1Q tagging
disabling on VLANs 2-750
displaying information 2-617
enabling on VLANs 2-750
802.1Q tunneling
disabling 2-203
displaying
enabled ports 2-401
tunneled protocols 2-484
enabling 2-203
setting
CoS value 2-205
drop threshold 2-207
maximum processed protocol packets 2-209
mode 2-694
port interface type 2-694
802.1S
802.1w
802.1x
allowing multiple hosts 2-120
default settings 2-118
disabling
globally 2-124
periodic authentication of client 2-123
disallowing multiple hosts 2-120
displaying
information for all interfaces 2-403
enabling
globally 2-124
periodic authentication of client 2-123
resetting to defaults 2-118
setting
authentication timer 2-125
port control values 2-121
reauthentication count 2-119
802.3ad
A
abbreviating commands
context-sensitive help 1-1
access control lists
accessing
DFC-equipped modules 2-355
module-specific CLI 2-369
access lists
IPX, time ranges 2-719
access maps
applying 2-752
specifying sequence 2-226
ACLs
clearing statistical information 2-25
defining
time ranges 2-719
enabling
time-based ACLs 2-719
merge
displaying current method 2-432
merge activities
debugging 2-80
disabling debugging 2-80
removing
time limitation 2-719
selecting
BDD-based merge method 2-232
ODM-based merge method 2-232
acronyms, list of A-1
Address Resolution Protocol
adjacency
debugging database 2-52
disabling database debugging 2-52
displaying
node information 2-499
table information 2-376
displaying IPC debug information 2-52
aggregate policer
clearing statistics and token counts in high-rate and low-rate policer buckets 2-43
defining 2-271
displaying
information 2-532
MLS QoS
enabling 2-288
removing 2-271
aggressive UDLD
aging time
MAC address table 2-221
ARP
displaying table 2-379
ARP throttling
disabling 2-241
enabling 2-241
ASIC
displaying
type 2-380
version 2-380
assigning an interface to a channel group 2-13
ATA flash
audience xix
authentication
setting username 2-731
authentication proxy
watch list
adding IP address 2-163
clearing entries 2-26
configuring 2-163
disabling 2-163
displaying 2-461
enabling 2-163
setting maximum login attempts 2-162
auto MDIX
disabling 2-230
enabling 2-230
auto media dependent interface with crossover detection
autonegotiation
setting delay timer 2-712
B
BDD
selecting ACL merge method 2-232
BGP
configuring maximum number of parallel routes 2-229
binary decision diagrams
BOOT environment variable
displaying information 2-383
bootflash
displaying OSM information 2-397
displaying WAN information 2-397
file system, displaying information 2-381
Border Gateway Protocol
BPDU
debugging spanning tree activities 2-98
BPDU filtering
disabling
by default 2-663
on an interface 2-639
enabling
by default 2-663
on an interface 2-639
BPDU guard
disabling
by default 2-665
on an interface 2-641
enabling
by default 2-665
on an interface 2-641
bridged traffic
microflow policing 2-274
bridge protocol data unit
buffer allocation
displaying information 2-548
bus utilization
displaying 2-388
C
cable diagnostics
PRBS
displaying test results 2-384
running test 2-716
TDR
displaying test results 2-386
running test 2-716
CCA register activity
debugging 2-55
disabling debugging 2-55
CDP
displaying
neighbor information 2-390
CEF
ARP throttling
disabling 2-241
enabling 2-241
consistency checker parameters
disabling 2-165
enabling 2-165
consistency checker types
disabling 2-165
enabling 2-165
disabling
rate-limiting 2-243
displaying
next-hop information 2-470
VLAN configuration information 2-470
VLAN interface status 2-470
enabling
missing prefix detection 2-165
rate-limiting 2-243
epoch
beginning new epoch 2-27
displaying information 2-465
incrementing 2-27
inconsistencies
clearing 2-29
displaying 2-467
setting
checker type 2-165
elapsed time 2-165
load balancing to include Layer 4 ports 2-242
period between scans 2-165
rate-limiting 2-243
specifying
maximum number of prefixes to check per scan 2-165
passive scan check 2-165
changing to untrusted port state 2-295
chassis
displaying
chassis MAC address ranges 2-388
current and peak traffic meter readings 2-388
percentage of backplane utilization 2-388
product number 2-439
serial number 2-439
switching clock failure recovery mode 2-388
displaying model type 2-439
chassis serial number, displaying 2-437
checksum
computing
MD5 signature 2-733
verifying
compressed image 2-139
Flash memory file 2-733
CIR
setting rate 2-271
Cisco Express Forwarding
Cisco IOS VLAN subinterface
displaying information 2-626
class map
displaying information 2-393
MLS QoS
enabling 2-290
class map configuration mode
accessing 2-18
clearing a Gigabit Ethernet interface 2-23
CLI
accessing
module-specific CLI 2-355
remote login 2-355
string search
alternation 1-10
anchoring 1-10
expressions 1-7
filtering 1-7
multiple-character patterns 1-9
multipliers 1-9
parentheses for recall 1-11
searching outputs 1-7
single-character patterns 1-7
using 1-7
client ID 2-568
command-line interface
command modes
accessing 1-5
exiting 1-5
understanding 1-5
commands
executing multiple interfaces simultaneously 2-156
committed information rate
configuration, saving 1-11
connection attempted by a failed server
changing to defaults 2-359
defining elapsed times 2-359
consistency checker
configuring 2-250
disabling 2-250
displaying
information 2-515
enabling 2-250
copying files 2-49
enabling automatic checksum verification 2-139
validating image 2-139
CoS value
defining default value 2-276
counters
clearing
interface counters 2-21
traffic meter counters 2-20
displaying
error counters 2-445
inband packet counts 2-427
interface counter information 2-394
total suppression discard counts 2-445
trunk counters 2-445
CPU time
guaranteeing processing time 2-365
crossbar fabric
crossbar fallback
allowing
switch to come online without SFM 2-136
switch to come online with SFM 2-136
preventing
switch to come online without SFM 2-136
switch to come online with SFM 2-136
CSM-specific commands
manager
removing manager configuration 2-226
specifying port for DFP-to-CSM connection 2-226
D
debounce timer
configuring 2-213
disabling 2-213
displaying debounce timer configuration 2-448
enabling 2-213
debug Commands
debug adjacency 2-52
debug backup 2-53
debug callback 2-54
debug cca 2-55
debug condition interface 2-56
debug condition standby 2-58
debug condition vlan 2-60
debug earl 2-61
debug ehsa 2-62
debug entry 2-63
debug etherchnl 2-64
debug ethernet-interface 2-66
debug fastethernet 2-67
debug fm 2-68
debug gssapi 2-69
debug icc 2-70
debug iccshim 2-71
debug interface 2-72
debug ipc 2-74
debug l2-mgr events 2-76
debug l3-mgr 2-77
debug local-ack 2-78
debug ltl 2-79
debug mergreapi 2-80
debug mls ip multicast 2-81
debug mls rp 2-82
debug monitor 2-83
debug msc 2-84
debug netdr 2-85
debug nvram 2-87
debug pagp 2-88
debug pm 2-90
debug priority 2-91
debug rpc 2-94
debug scp 2-96
debug smf updates 2-97
debug spanning tree 2-98
debug spanning tree backbonefast 2-99
debug spanning tree switch 2-100
debug spanning tree uplinkfast 2-102
debug sw-vlan 2-103
debug sw-vlan ifs 2-104
debug sw-vlan notification 2-105
debug sw-vlan vtp 2-106
debug tcam 2-108
debugging
ACL merge activities 2-80
activity monitoring 2-83
adjacency database information 2-52
backup events 2-53
CCA register activity 2-55
EARL activity 2-61
EHSA activity 2-62
EtherChannel shim 2-64
Ethernet interface events 2-66
Fast Ethernet interface
events 2-67
packets 2-67
feature manager
activities 2-68
events 2-68
GSSAPI events 2-69
HSRP state changes 2-58
ICC events 2-70
ICC shim events 2-71
incoming queue entries 2-63
interface-related activities 2-56, 2-72
IPC activities 2-74
ISL VLAN ID debug messages 2-105
Layer2 manager events 2-76
Layer3 manager activities 2-77
local acknowledgement activities 2-78
LTL manager activities 2-79
MLS IP multicast activities 2-81
MLS RP activities 2-82
MSC activities 2-84
NetDriver activities 2-85
NVRAM activities 2-87
PAgP activities 2-88
PAgP shim 2-64
PF activities 2-89
PM activities 2-90
PPP telephone callback activity 2-54
priority output queueing 2-91
QM activity 2-92
QoS manager activity 2-93
RPC activity 2-94
SCP activity 2-96
SMF address insertions and deletions 2-97
spanning tree
activities 2-98
BackboneFast events 2-99
switch shim 2-100
UplinkFast events 2-102
TCAM activity 2-108
VLAN
manager activities 2-103
VLAN manager IOS file system error tests 2-104
VLAN output 2-60
VTP protocol debug messages 2-106
debugging backup events 2-53
debug pf command 2-89
debug qm command 2-92
debug qm-sp command 2-93
default form of a command, using 1-6
delimiter
configuring for MLS QoS 2-292
denial of service
destination address
MLS QoS
setting statistics data export destination address 2-293
DFC
remote login
attach command 2-6
remote login command 2-355
diagnostic testing
bypassing 2-114
directed broadcasts
disabling 2-244
displaying information 2-499
enabling 2-244
directories
creating 2-231
directory
setting the default 2-11
disabling debugging backup events 2-53
disabling display of monitoring activity 2-83
displaying monitoring activity 2-83
Distributed Forwarding Card
document conventions xx
document organization xix
DoS
ARP throttling
disabling 2-241
enabling 2-241
rate limiting
disabling 2-243
enabling 2-243
dot1q
dot1x
DSCP
displaying
mutation mapping 2-529
duplex mode
configuring 2-127
dynamic MAC address entries
clearing 2-34
dynamic SVI
accessing 2-158
creating 2-158
deleting 2-158
E
EARL
debugging 2-61
disabling debugging 2-61
egress
defining DSCP-to-CoS mapping 2-279
deleting
DSCP-to-CoS mapping 2-279
displaying
DSCP mutation mapping 2-529
mode information 2-515
queueing information 2-571
removing DSCP-to-CoS mapping 2-279
EHSA activity
debugging 2-62
disabling debugging 2-62
Enhanced Address Recognition Logic
Enhanced Password Security
disabling 2-731
enabling 2-731
enhanced password security
establishing 2-731
entering VLAN database 2-748
environmental alarms
displaying information 2-405
EOBC interface
displaying information 2-413
EoMPLS
disabling
port based forwarding 2-317
VLAN based forwarding 2-317
enabling
port based forwarding 2-317
VLAN based forwarding 2-317
epoch
displaying information 2-465
incrementing 2-27
rebuilding CEF table 2-27
error counters
displaying summary 2-602
error disable
detection
configuring timer 2-131
specifying recovery cause 2-131
recovery
configuring timer 2-132
displaying information 2-417
specifying recovery cause 2-132
state
displaying information 2-453
error disable detection
displaying information 2-416
EtherChannel
assigning interface to an EtherChannel group 2-13
debugging
disabling debugging 2-64
shim debuggings 2-64
spanning tree activities 2-98
displaying
information 2-418
guard misconfiguration detection
detecting 2-644
disabling 2-644
enabling 2-644
error message 2-644
removing interface from an EtherChannel group 2-13
Ethernet interface
debugging 2-66
debugging events 2-66
disabling debugging 2-66
Ethernet over Multiprotocol Label Switching
executing remote switch command 2-354
export interval
MLS QoS
setting 2-294
expressions
matching multiple expression occurrences 1-9
multiple-character patterns 1-9
multiplying pattern occurrence 1-11
single-character patterns 1-7
specifying alternative patterns 1-10
extended MAC access list
defining 2-219
extended range VLANs
entering config-VLAN mode 2-739
extended-range VLANs
configuring
characteristics in capture mode 2-690
STP 2-669
creating dynamic SVI 2-158
defining
PVLAN association 2-701
deleting
dynamic SVI 2-158
PVLAN association 2-701
RSPAN session 2-313
SPAN session 2-313
disabling capture mode 2-688
displaying
current operating information 2-579
filter information 2-618
enabling capture mode 2-688
executing a command on multiple interfaces 2-156
setting
when in access mode 2-686
starting
new RSPAN session 2-313
new SPAN session 2-313
extended system ID display
disabling 2-645
enabling 2-645
F
fabric
disabling
switching mode 2-137
trunking mode 2-137
displaying
channel status 2-422
errors 2-422
information 2-422
percentage utilization 2-422
slot numbers 2-422
switching mode 2-422
enabling
switching mode 2-137
trunking mode 2-137
specifying
MOTD banner 2-134
fan trays
displaying part number 2-408
Fast Ethernet interface
debugging 2-67
disabling debugging 2-67
fast software upgrade
feature manager
debugging
disabling debugging 2-68
events and activities 2-68
displaying
CBAC-configured ACL lists and ports 2-428
dynamic reflexive entries 2-431
general information 2-425
inband packet count 2-427
per-interface information 2-429
per-VLAN information 2-433
summaries 2-432
field-replaceable unit
field upgradeable ROMMON
upgrading
route processor 2-729
switch processor 2-729
files
copying 2-49
disabling automatic image verification 2-49
enabling automatic checksum verification 2-139
validating image 2-139
file system
erase 2-129
file system consistency check
Flash file system
check and repair 2-144
checking for damage 2-144
creating new directory 2-231
directory recovery 2-727
enabling fsck utility 2-144
file recovering 2-727
format 2-142
permanently deleting files 2-674
setting the default 2-11
verify checksum 2-733
Flash memory
formatting 2-142
flow control
configuring receive mode 2-140
configuring send mode 2-140
displaying configuration information 2-450
port guidelines 2-141
flow fragments
permit configuration 2-160
flow mask
restoring 2-238
specifying 2-238
fm
FRU
displaying IDPROM information 2-437
displaying status information 2-408
fsck utility
enabling 2-144
setting automatic mode 2-144
FSU
redundancy force-switchover command 2-351
G
GBIC
displaying type 2-442
Gigabit Ethernet interface
clearing hardware logic 2-23
global configuration mode, summary 1-5
group cache entries
clearing 2-31
GSSAPI events
debugging 2-69
disabling debugging 2-69
H
half-duplex mode
configuring 2-127
hardware
verifying programmed values 2-569
hardware Layer 3 switching
displaying
adjacency node information 2-499
adjacency table information 2-376
entry information 2-497
hardware load-sharing information 2-501
hardware table entry information 2-502
IP entry information 2-504
IPX entry information 2-506
MAC address information 2-508
number of prefixes in hardware Layer3 switching table 2-510
packet information 2-510
statistical information 2-509
HSRP 2-680
hardware logic
clearing on VLANs 2-24
hardware switching
configuring
consistency checker 2-250
disabling consistency checker 2-250
displaying
CEF table information 2-469
consistency checker information 2-515
enabling consistency checker 2-250
host connection
optimizing port configuration 2-684
hot standby protocol
debugging 2-58
disabling debugging 2-58
limiting output 2-58
Hot Standby Router Protocol
HSRP
configuring
hardware Layer 3 switching 2-680
initialization delay 2-676
tracking 2-678
disabling
delay period 2-676
displaying
delay period information 2-594
I
ICC
debugging 2-70
disabling debugging 2-70
displaying counter and status information 2-435
shim events
debugging 2-71
disabling debugging 2-71
IDPROM
displaying information 2-437
ifIndex persistence
clearing previously interface configuration mode SNMP ifIndex commands 2-632
disabling globally 2-637
disabling on an interface 2-633
enabling globally 2-637
enabling on an interface 2-633
IGMP
clearing IGMP group cache entries 2-31
displaying
explicit-tracking status 2-471
interface configuration information 2-471
interface status information 2-471
snooping
configuring a Layer 2 port as a multicast router port 2-180
configuring fast leave 2-177
configuring last member query interval 2-179
configuring static member 2-184
disabling 2-176
displaying information 2-473
enabling 2-176
enabling multicast support within a subnet 2-182
enabling querier function 2-182
maximum number of Layer 2 entries 2-178
IGMP snooping
configuring
last member query interval 2-179
maximum number of Layer 2 entries 2-178
disabling 2-176
fast leave processing 2-177
multicast support within a subnet 2-182
displaying
status and configuration information 2-471
status and configuration information for VLAN 2-471
enabling 2-176
fast leave processing 2-177
multicast support within a subnet 2-182
multicast router
learning method, configuring 2-180
next-hop interface, specifying 2-180
images
disabling verification for current operation 2-49
enabling automatic checksum verification 2-139
validating image 2-139
inactive state
displaying reason for the inactive state 2-453
incoming queue entries
debugging 2-63
disabling debugging 2-63
informs, enabling 2-635
ingress
defining
CoS-to-DSCP mapping 2-278
defining IP precedence-to-DSCP mapping 2-280
deleting
CoS-to-DSCP mapping 2-278
deleting IP precedence-to-DSCP mapping 2-280
displaying
queueing information 2-571
inline power
configuring administrative mode 2-333
displaying
power consumed by module 2-564
status information 2-564
inter-card communication
interface configuration mode
entering 2-152
interface configuration mode, summary 1-5
interface counters
displaying information 2-394
interface-range macro
creating 2-112
interface-related activities
disabling debugging 2-56, 2-72
interfaces
configuring
duplex mode 2-127
half-duplex mode 2-127
interface speeds 2-671
displaying
administrative status 2-456
description 2-449
error counters 2-445
error-disabled state 2-453
flow control information 2-450
interface capabilities 2-442
operation status 2-456
PVLAN mapping 2-452
status 2-449
status summary 2-455
total number of interface VLANs 2-455
total suppression discard counts 2-445
traffic 2-440
trunk counters 2-445
trunk information 2-458
entering interface configuration mode 2-152
switching ports
displaying administrative and operational status 2-456
displaying status 2-456
intermediate system-to-intermediate system
internal VLAN allocation
configuring 2-754
default setting 2-754
displaying
allocation information 2-620
displaying hidden VLAN-to-WAN interface mapping 2-397
internal VLANs
displaying status 2-609
Internet Group Management Protocol
Internetwork Packet Exchange
interprocessor communication
Inter-Switch Link VLANs
IP
clearing
access list statistical information 2-25
NetFlow
enabling switching 2-193
IPC
debugging activities 2-74
disabling debugging 2-74
displaying cache flow entries 2-462
IP IGMP
displaying
snooping information for VLAN interface 2-471
IP MLS
clearing entries 2-36
IP multicast
routing
displaying routing table 2-474
displaying snooping information 2-473
statistic counters
resetting 2-40
IP output queue
limiting size 2-147
restoring default size 2-147
IP routing protocols
configuring maximum number of parallel routes 2-229
IP shortcuts to MSFC
disabling 2-300
enabling 2-300
IPv6
ACLs
displaying NetFlow entries for reflexive ACLs 2-522
displaying
NetFlow entries 2-522
NetFlow hardware configuration 2-522
IPX (Internet Packet Exchange)
access lists, time ranges 2-719
IPX MLS
clearing entries 2-36
IPX shortcuts to MSFC
disabling 2-302
enabling 2-302
IS-IS
configuring network entity title 2-323
ISL VLANs
debug messages
debugging 2-105
disabling debugging 2-105
mapping to 802.1Q VLANs 2-756
issuing EXEC-level commands in other modes 2-117
J
jumbo frames
default value 2-320
restoring default value 2-320
setting maximum packet size 2-320
setting maximum transmission unit size 2-320
L
LACP
configuring interface 2-13
deselecting channeling protocol 2-16
displaying
internal information 2-488
neighbor information 2-488
port state flags 2-488
protocol setting 2-418
statistical information 2-488
system identification 2-488
port state flags
displaying 2-488
setting
port priority 2-211
system priority 2-212
setting channeling protocol 2-16
last member query interval
configuring for IGMP snooping 2-179
Layer 2
configuring port as a group member 2-184
configuring port as a multicast router port 2-180
Layer 2 interface type
resetting 2-694
setting 2-694
Layer 2 manager events
debugging 2-76
disabling debugging 2-76
Layer 3 manager
displaying information 2-486
Layer 3 manager activities
debugging 2-77
disabling debugging 2-77
Link Aggregation Control Protocol
link debounce
displaying
timer status 2-442
link debounce timer
configuring 2-213
disabling 2-213
displaying debounce timer configuration 2-448
enabling 2-213
link-status event messages
disabling
globally 2-215
on an interface 2-217
on a subinterface 2-218
on system initialization 2-215
enabling
globally 2-215
on an interface 2-217
on a subinterface 2-218
on system initialization 2-215
link type
configuring 2-647
local acknowledgement activities
debugging 2-78
disabling debugging 2-78
loop guard
disabling 2-646
enabling 2-646
LTL manager activities
debugging 2-79
disabling debugging 2-79
M
MAC address tables
adding
static entries 2-222
aging time
configuring 2-221
clearing dynamic entries 2-34
clearing static entries 2-34
configuring
aging time 2-221
static entries 2-222
static entries with IGMP snooping disabled 2-222
unicast flood protection 2-224
disabling
IGMP snooping on static MAC addresses 2-222
displaying
aging time 2-491
DFC-specific information 2-491
dynamic table entries 2-491
entry count 2-491
information 2-491
interface-specific information 2-491
multicast table entries only 2-491
number of manually configured entries 2-491
unicast flood protection information 2-495
removing
static entries 2-222
static entries
adding 2-222
configuring 2-222
removing 2-222
unicast flood protection
configuring 2-224
displaying information 2-495
macro
creating an interface-range macro 2-112
maintenance loop signaling entity
mapping
802.1Q VLANs to ISL VLANs 2-756
accessing
QoS policy map configuration mode 2-327
configuring
egress DSCP-to-CoS mapping 2-279
ingress IP precedence-to-DSCP mapping 2-280
policed DSCP values to marked-down DSCP value mapping 2-282
QoS policy map 2-327
configuring QoS class maps 2-18
creating VLAN access map 2-746
deleting
CoS-to-DSCP mapping 2-278
egress DSCP-to-CoS mapping 2-279
ingress IP precedence-to-DSCP mapping 2-280
policed DSCP values to marked-down DSCP value mapping 2-282
QoS class maps 2-18
QoS policy map 2-327
displaying
class map information 2-393
information 2-452
policy map information 2-558
policy map interface information 2-560
entering VLAN access-map command mode 2-746
removing VLAN access map 2-746
match subcommand
accessing 2-18
maximum NetFlow table allocation
configuring 2-265
maximum transmission unit
MD5 signature
computing 2-733
Media Access Control
message digest 5
message-of-the-day
microflow policing
enabling 2-277
removing 2-277
microflow policing for bridged traffic
enabling 2-274
removing 2-274
MLS
configuring
fast-aging time 2-234
long-aging time 2-235
normal-aging time 2-236
directed broadcasts
displaying information 2-499
disabling directed broadcast 2-244
displaying
ACL merge method 2-432
ASIC version 2-496
packet error information 2-536
statistical information 2-536
statistics data export information 2-533
enabling
directed broadcast 2-244
NetFlow entry feature 2-264
interface
assigning a VLAN ID 2-307
removing a management interface 2-304
removing a VLAN ID 2-307
specifying a management interface 2-304
NDE
clearing counters 2-41
clearing filter 2-42
disabling population of additional fields 2-260
displaying status and configuration information 2-533
enabling export feature 2-261
enabling population of additional fields 2-260
removing address 2-305
removing filter options 2-258
removing source IP address of collector 2-263
specifying address 2-305
specifying filter options 2-258
specifying source IP address 2-263
permitting traffic 2-246
QoS statistics data export
aggregate policer 2-288
class map 2-290
delimiter 2-292
destination address 2-293
disabling globally 2-285
enabling globally 2-285
interval 2-294
per-port disabling 2-286
per-port enabling 2-286
removing excluded protocol port 2-237
restoring flow mask 2-238
selecting ACL merge method 2-232
specifying excluded protocol port 2-237
specifying flow mask 2-238
TCL
displaying information 2-538
VLAN
displaying statistical information 2-539
VTP domain
linking 2-308
removing 2-308
MLSE
removing entry 2-39
MLS IP
displaying
mode information 2-515
statistical information for NetFlow entries 2-518
displaying information 2-512
global
configuring threshold 2-255
disabling 2-247
disabling consistency checker 2-250
disabling NetFlow-based non-rpf feature 2-252
disabling subnet download 2-249
disabling support for policy-routed packets 2-256
enabling 2-247
enabling consistency checker 2-250
enabling NetFlow-based non-rpf feature 2-252
enabling subnet download 2-249
enabling support for policy-routed packets 2-256
interface
disabling external switches 2-301
disabling internal router 2-240
disabling NetFlow-based non-RPF feature 2-253
disabling shortcuts 2-248
enabling external switches 2-301
enabling internal router 2-240
enabling NetFlow-based non-RPF feature 2-253
enabling non-RPF multicast fastdrop 2-254
enabling shortcuts 2-248
IP shortcuts to MSFC
disabling 2-300
enabling 2-300
multicast activities
debugging 2-81
disabling debugging 2-81
MLS IPX
displaying information 2-519
interface
disabling 2-257
disabling external switches 2-303
enabling 2-257
enabling external switches 2-303
IPX shortcuts to MSFC
disabling 2-302
enabling 2-302
MLS QoS
aggregate policer
clearing statistics and token counts in high-rate and low-rate policer buckets 2-43
defining 2-271
removing 2-271
attaching a policy-map to an interface 2-368
clearing statistics and token counts in high-rate and low-rate policer buckets 2-43
default CoS value
defining 2-276
removing 2-276
disabling
port attribute checks on EtherChannel bundling 2-275
port queueing mode 2-283
displaying
aggregate policer information 2-532
information 2-529
egress DSCP-to-CoS mapping
defining 2-279
removing 2-279
enabling
port attribute checks on EtherChannel bundling 2-275
port queueing mode 2-283
extended trust
configuring trust mode 2-297
displaying trust mode 2-571
global
disabling 2-268
disabling PFC QoS and enabling port queueing 2-268
enabling 2-268
ingress CoS-to-DSCP mapping
defining 2-278
removing 2-278
ingress IP precedence-to-DSCP mapping
defining 2-280
removing 2-280
interface
changing to untrusted port state 2-295
disabling 2-270
enabling 2-270
setting trusted port state 2-295
microflow policing
enabling 2-277
removing 2-277
microflow policing for bridged traffic
enabling 2-274
removing 2-274
policed in-profile DSCP mapping
defining 2-282
removing 2-282
policy-map configuration mode
accessing 2-327
exiting 2-327
removing a policy-map from an interface 2-368
VLAN switch port
disabling 2-299
enabling 2-299
MLS QoS policy maps
class option description, table 2-328
configuring 2-327
MLS RP activities
debugging 2-82
disabling debugging 2-82
modes
modules
power cycling 2-149
powering down 2-332
powering on 2-332
more commands
filter 1-7
search 1-7
--More-- prompt
filter 1-7
search 1-7
MOTD banner
fabric module 2-134
MPLS
disabling
tag-to-tag load balancing 2-319
disabling routing 2-317
displaying
state of currently routed VCs 2-543
enabling
tag-to-tag load balancing 2-319
enabling routing 2-317
tag switching
disabling load balancing 2-319
displaying table information 2-547
enabling load balancing 2-319
MSC activities
debugging 2-84
disabling debugging 2-84
MSFC
displaying
buffer allocation information 2-548
fault information 2-548
internal information 2-548
net interrupt information 2-548
processor TLB registers 2-548
standby MSFC2 DRAM 2-383
programing new ROMMON into Flash 2-729
setting execution preference 2-729
MSFC commands
show cwan 2-397
MST
configuration submode command
instance 2-150
name 2-322
revision 2-360
show 2-374
configuring
forward delay 2-654
hello-time 2-655
max-age 2-656
max-hops 2-657
root as primary 2-658
root as secondary 2-658
displaying
current configuration 2-374
MST protocol information 2-591
MST region configuration information 2-591
pending configuration 2-374
entering configuration submode 2-652
instance
mapping VLANs 2-150
mapping
PVLANs to instance 2-341
VLANs 2-150
restarting protocol migration 2-46
setting
configuration revision number 2-360
MST region name 2-322
path cost for instances 2-650
port priority for instances 2-650
switching to PVST mode 2-649
MTU
default values 2-320
restoring default value 2-320
setting
maximum Layer 2 payload size 2-713
maximum Layer 3 payload size 2-713
maximum packet size 2-320
maximum size 2-320
multicast router
displaying routing table 2-474
displaying snooping information 2-473
Multilayer Switch Feature Card
Multilayer Switching
multiple-character patterns 1-9
Multiple Spanning Tree
Multiprotocol Label Switching
N
NDE
clearing
counters 2-41
filter 2-42
disabling
population of additional fields 2-260
sampled NetFlow Data Export on an interface 2-266
displaying
aging information 2-522
hardware status 2-522
sampled NetFlow Data Export status 2-535
status and configuration information 2-533
status information 2-521
enabling
export feature 2-261
population of additional fields 2-260
sampled NetFlow Data Export on an interface 2-266
filter options
removing 2-258
specifying 2-258
removing address 2-305
sampled NDE
disabling on an interface 2-266
enabling on an interface 2-266
sampled NetFlow Data Export
specifying sampling method 2-309
specifying address 2-305
specifying source IP address of collector 2-263
NDE interface export
flow masks 2-258
specifying filter options 2-258
NET
configuring 2-323
NetDriver activities
debugging 2-85
disabling debugging 2-85
NetFlow
aggregation
configuring specific aggregation caches 2-167
displaying cache flow entries 2-462
configuring
aggregation caches—specific 2-167
maximum flow allocation 2-265
disabling
sampled NetFlow Data Export globally 2-309
displaying
aging information 2-522
cache flow entries 2-462
hardware status 2-522
IP flow mask 2-522
statistical information 2-512
switched packet counts 2-536
table information 2-512
displaying IPX information 2-527
enabling
sampled NetFlow Data Export globally 2-309
switching 2-193
enabling entry creation 2-264
global
disabling non-rpf feature 2-252
enabling non-rpf feature 2-252
hardware switching
displaying CEF table information 2-469
incorporating bridged/IntraVLAN traffic 2-274
interface
disabling non-RPF feature 2-253
enabling non-RPF feature 2-253
specifying source interface 2-172
monitoring
NetFlow table usage on DFCs 2-267
NetFlow table usage on SP 2-267
switching
clearing statistics 2-30
displaying cache flow entries 2-462
exporting cache entries 2-170
setting cache size 2-169
specifying source interface 2-172
specifying version 2-174
table usage on DFCs
monitoring 2-267
table usage on SP
monitoring 2-267
NetFlow Data Export
network entity title
network interrupt
displaying information 2-548
next-hop
displaying CEF VLAN information 2-470
no form of a command, using 1-6
non-RPF multicast fastdrop
enabling 2-254
NVRAM activities
debugging 2-87
disabling debugging 2-87
O
ODM
selecting ACL merge method 2-232
online diagnostics
bypassing boot-up diagnostic testing 2-114
displaying current diagnostic level 2-399
displaying diagnostic TOC 2-399
displaying test results 2-399
global configuration mode
clearing schedule 2-114
setting boot-up diagnostic level 2-114
setting up schedule 2-114
order-dependent merge algorithm
OSM
displaying bootflash information 2-397
displaying statistical information 2-397
displaying VLAN-to-WAN interface mapping 2-397
P
packet error information, displaying 2-536
paging prompt
PAgP
clearing information 2-45
configuring interface 2-13
debugging 2-88
disabling debugging 2-64
shim debuggings 2-64
deselecting channeling protocol 2-16
disabling debugging 2-88
displaying
protocol information 2-418
hot standby mode
returning to defaults 2-326
selecting ports 2-326
input interface of incoming packets
learning 2-325
returning to defaults 2-325
port channels
displaying information 2-552
setting channeling protocol 2-16
passwords
establishing enhanced password security 2-731
setting username 2-731
pathcost
setting STP default pathcost calculation method 2-660
PBR
disabling 2-256
enabling 2-256
per-VLAN spanning tree
PF activities
debugging 2-89
disabling debugging 2-89
PIM
disabling
Auto-RP groups 2-190
disabling triggered RPF check 2-187
displaying
triggered RPF check events 2-479
enabling
Auto-RP groups 2-190
setting
back-off interval 2-187
check interval 2-189
triggered check interval 2-187
pipe symbol
specifying alternative patterns 1-10
PIR
platform
displaying
CPU EEPROM information 2-554
fault data 2-554
IP multicast-related information 2-554
MSFC information 2-554
net interrupt information 2-554
processor TLB register information 2-554
platforms
displaying
buffer allocation information 2-554
PM activities
debugging 2-90
disabling debugging 2-90
Point A-6
point-to-point link type
configuring 2-647
Point-to-Point Protocol
policer
policy-based routing
See PBR 2-256
policy maps
clearing marking configuration 2-370
displaying information 2-558
displaying per-interface information 2-560
marking matched traffic with DSCP value 2-370
marking matched traffic with IP precedence value 2-372
port channels
accessing 2-154
clearing information 2-45
creating 2-154
displaying
channel group information 2-552
counter information 2-445
interface capabilities 2-442
load distribution method
resetting to defaults 2-330
setting 2-330
portName MIB objects
configuring 2-675
port ranges
executing 2-156
port security
configuring
aging time 2-697
disabling 2-696
displaying setting information 2-562
enabling 2-696
removing
MAC address from list 2-698
setting
maximum number of secured addresses 2-699
maximum secure MAC addresses 2-698
violation action 2-700
violation actions 2-700
port speeds
configuring 2-671
default 2-671
power cycling modules 2-149
powering down empty slots 2-332
power redundancy mode
setting 2-334
power status
displaying 2-564
power supplies
displaying
product number 2-438
serial number 2-438
type 2-438
setting power redundancy mode 2-334
PPP
disabling
calls to interface reset vector 2-335
generation of LCP down/keepalive failure link traps 2-335
enabling
calls to interface reset vector 2-335
generation of LCP down/keepalive failure link traps 2-335
PPP telephone callback activity
debugging 2-54
disabling debugging 2-54
PRBS
displaying cable diagnostic test results 2-384
running cable diagnostics 2-716
priority output queueing
debugging 2-91
disabling debugging 2-91
private VLANs
privileged EXEC mode, summary 1-5
processor TLB registers
displaying information 2-548
promiscuous ports
setting mode 2-694
prompts
system 1-5
protocol filtering
disabling 2-342
displaying information 2-567
enabling 2-342
modifying mode 2-705
Protocol Independent Multicast
protocol tunneling
disabling interfaces 2-203
displaying protocols 2-484
enabling interfaces 2-203
setting
CoS value 2-205
drop threshold 2-207
specifying maximum processed protocol packets 2-209
pseudo random binary sequence
PVLANs
defining association 2-701
deleting association 2-701
disabling sticky-ARP 2-195
displaying
configuration information 2-456
currently configured information 2-623
mapping information 2-452
enabling sticky-ARP 2-195
mapping
for promiscuous port 2-703
primary and secondary VLAN 2-339
to an instance 2-341
setting
host ports 2-694
interface type 2-694
promiscuous mode 2-694
VLAN interface configuration mode
mapping 2-339
primary and secondary VLAN mapping 2-339
removing mappings 2-339
VLAN submode
adding VLANs 2-337
configuring association 2-337
designating VLANs 2-337
removing VLANs 2-337
PVST
switching to MST mode 2-649
Q
QDM
disconnecting a session 2-116
displaying
client ID 2-568
information and status about currently active QDM clients 2-568
Q-in-Q
802.1Q in 802.1Q
QM
disabling activity debugging 2-92
displaying switch processor information 2-569
enabling activity debugging 2-92
QM-SP
disabling activity debugging 2-93
enabling activity debugging 2-93
QoS
accessing
class map configuration mode 2-18
class map
displaying information 2-393
clearing
global interface counters 2-21
configuring
class maps 2-18
time-based ACLs 2-719
enabling
time-based ACLs 2-719
manager
displaying information 2-569
policy maps
clearing marking configuration 2-370
displaying information 2-558
displaying per-interface information 2-560
marking matched traffic with DSCP value 2-370
marking matched traffic with IP precedence value 2-372
rcv-queue ratio limit
setting 2-345
removing
ACL time-range limitation 2-719
transmit-queue size ratio
setting 2-764
QoS Device Manager
QoS manager
QoS statistics data export
See MLS QoS statistics data export
question command 1-1
queueing
displaying information 2-571
R
rapid per-VLAN spanning tree
rapid PVST
disabling 2-649
enabling 2-649
Rapid Spanning Tree Protocol
Rapid Spanning Tree Protocol+
rcv-queues
mapping CoS values 2-343
returning to default values 2-346
setting drop threshold 2-348
setting ratio limit 2-345
specifying maximum threshold 2-346
real servers
changing active connections 2-228
limiting active connections 2-228
receive queues
recovering a file 2-727
redundancy
displaying
information 2-573
RF client list 2-573
RF operational counters 2-573
displaying RF states 2-573
fast software upgrade 2-351
reloading entire switch 2-352
route processor
synchronizing BOOTVAR 2-8
synchronizing BOOTVAR and configuration register default settings 2-8
synchronizing configuration register 2-8
synchronizing startup config 2-8
setting mode 2-311
synchronizing supervisor engines 2-350
turning off auto synchronization 2-8
related documentation xix
reloading switch 2-352
remote access
DFC-equipped modules 2-6
remote command
executing directly to module 2-354
executing directly to route processor 2-354
remote login 2-355
remote procedure call
remote SPAN
removing an interface from a channel group 2-13
Reverse Path Forwarding
RFC 1340 2-462
RFC 1757, RMON alarm group
setting alarm 2-361
RFC 1757, RMON MIB 2-362
RMON event table
adding event 2-363
removing event 2-363
RGMP
debugging 2-75
disabling 2-191
enabling 2-191
RMON
adding events 2-363
alarms, disabling 2-361
alarms, enabling 2-361
disabling 2-363
disabling MIB object alarms 2-361
removing events 2-363
setting alarms on MIB objects 2-361
ROMMON
displaying status 2-576
field upgrading 2-729
programing new ROMMON into Flash 2-729
setting execution preference 2-729
ROM monitor mode,
summary 1-6
root guard
disabling 2-646
displaying
root inconsistency status 2-585
enabling 2-646
Route Processor Redundancy
Route Processor Redundancy+
RPC
debugging activity 2-94
disabling debugging 2-94
displaying information 2-577
enabling debugging 2-94
RPF
disabling
exists-only checks 2-198
interface 2-196
triggered check 2-187
displaying
triggered check events 2-479
enabling
exists-only checks 2-198
interface 2-196
setting
check interval 2-189
PIM back-off interval 2-187
triggered check interval 2-187
RPR+
displaying
redundancy information 2-573
switchover information 2-573
fast software upgrade 2-351
setting redundancy mode 2-311
RSPAN
adding interfaces or VLANs 2-313
deleting interfaces or VLANs 2-313
deleting session 2-313
displaying list 2-625
displaying session information 2-541
starting new session 2-313
RSTP+
configuring link type 2-647
running configuration
displaying current operating information 2-579
S
sampled NDE
disabling on an interface 2-266
enabling on an interface 2-266
sampled NetFlow Data Export
disabling globally 2-309
disabling on an interface 2-266
displaying
status 2-535
enabling globally 2-309
enabling on an interface 2-266
specifying
sampling method 2-309
saving configuration changes 1-11
SCP
disabling debugging 2-96
displaying information 2-581
enabling debugging 2-96
server load balancing
setting trusted port state 2-295
show commands
filter 1-7
search 1-7
single-character patterns
special characters
single-character patterns, table 1-7
SLB
displaying inband packet count 2-427
slot0
displaying information 2-582
SMF address insertions and deletions
debugging 2-97
disabling debugging 2-97
SNMP
ifIndex persistence
clearing previously interface configuration mode SNMP ifIndex commands 2-632
disabling globally 2-637
disabling on an interface 2-633
enabling globally 2-637
enabling on an interface 2-633
informs
disabling 2-635
enabling 2-635
traps
disabling 2-635
enabling 2-635
spanning tree
active states
displaying 2-585
configuring link type 2-647
disabling
activity debugging 2-98
BackboneFast 2-638
BackboneFast event debugging 2-99
BPDU filtering 2-639
BPDU guard 2-641
extended system ID display 2-645
loop guard as a default 2-648
loop guard mode 2-646
PortFast BPDU filtering 2-663
PortFast BPDU guard 2-665
PortFast by default 2-666
PortFast by default on all access ports 2-666
PortFast on an interface 2-661
root guard mode 2-646
UplinkFast debugging 2-102
displaying
active interfaces only 2-585
active states 2-585
BackboneFast status 2-585
bridge status and configuration 2-585
default path cost method 2-585
status information 2-585
status per VLAN 2-585
summary of interface information 2-585
UplinkFast status 2-585
enabling
activity debugging 2-98
BackboneFast 2-638
BackboneFast event debugging 2-99
BPDU filtering 2-639
BPDU guard 2-641
extended system ID display 2-645
loop guard as a default 2-648
loop guard mode 2-646
PortFast BPDU filtering 2-663
PortFast BPDU guard 2-665
PortFast by default 2-666
PortFast by default on all access ports 2-666
PortFast on an interface 2-661
root guard mode 2-646
UplinkFast debugging 2-102
EtherChannel
guard misconfiguration detection 2-644
interface
portfast mode, disabling 2-661
portfast mode, enabling 2-661
path cost
reverting to default 2-642
setting 2-642
port priority
reverting to default 2-667
setting 2-667
restarting protocol migration 2-46
setting default pathcost calculation method 2-660
UplinkFast
disabling 2-668
enabling 2-668
VLANs
configuring 2-669
reverting to defaults 2-669
SPAN session
adding interfaces or VLANs 2-313
deleting interfaces or VLANs 2-313
deleting session 2-313
displaying session information 2-541
starting new session 2-313
special characters
anchoring, table 1-10
SP QoS manager
static MAC address entries
clearing 2-34
static member, configuring 2-184
statistics data export
See MLS QoS statistics data export
statistics retrieval
setting interval 2-367
sticky-ARP
disabling on PVLANs 2-195
enabling on PVLANs 2-195
storm control
disabling suppression mode 2-682
enabling suppression mode 2-682
setting suppression level 2-682
stub
enabling non-RPF multicast fastdrop 2-254
subinterface configuration mode, summary 1-6
sup-bootflash
displaying file system information 2-595
switch console, accessing 2-355
switching, NetFlow
clearing statistics 2-30
setting cache size 2-169
switching characteristics
disabling
capture mode 2-688
enabling
capture function 2-688
modifying 2-684
capture function 2-690
optimizing port configuration for host connection 2-684
returning to interfaces
capture function 2-684
switching interface
displaying administrative and operational status 2-456
Switch-Module Configuration Protocol
switch ports
configuring
capture ports 2-688
voice VLANs 2-710
defining
PVLAN association 2-701
mapping
PVLANs for promiscuous port 2-703
modifying characteristics 2-684
port security
configuring aging time 2-697
disabling 2-696
displaying setting information 2-562
enabling 2-696
removing MAC address from list 2-698
setting maximum number of secured addresses 2-699
setting maximum secure MAC addresses 2-698
setting violation action 2-700
violation actions 2-700
removing
mapping PVLANs for promiscuous port 2-703
PVLAN mapping 2-701
voice VLAN 2-710
setting
mode 2-694
trunk characteristics 2-706
trunk Ethertype value 2-692
VLAN in access mode 2-686
specifying destination VLANs 2-690
switchports
disabling protocol filtering 2-705
modifying protocol filtering mode 2-705
switch reload 2-352
switch shim
debugging 2-100
disabling debugging 2-100
synchronizing supervisor engines 2-350
system prompts 1-5
system software
displaying names and sources of configuration files 2-606
displaying uptime since active 2-606
displaying version of 2-606
T
Tab key
command completion 1-1
table contention level
tables
characters with special meaning 1-7
class syntax description 2-328
command tokens 2-135
CoS-to-DSCP mapping table 2-278
default MTU values 2-320
detection mechanism types 2-166
DSCP-to-CoS default mapping table 2-279
IP-Precedence-to-DSCP default mapping 2-280
mac access-list extended subcommands 2-219
match syntax description 2-19
relationship between duplex and speed commands 2-128, 2-672, 2-673
show cable-diagnostics prbs 2-385
show cable-diagnostics prbs command output fields 2-385
show cable-diagnostics tdr 2-386
show ip cache flow command output fields—flow switching cache 2-463
show ip cache flow command output fields—NetFlow activity by protocol 2-464
show ip cache flow command output fields—packet size distribution 2-463
show ip cef inconsistency field descriptions 2-468
show ip mroute field descriptions 2-477
show ip wccp web-cache detail command output fields 2-481
show mls cef command output fields 2-498
show mls cef summary command output fields 2-511
show port flowcontrol command output fields 2-451
show tcam counts command output fields 2-599
show vlan command output fields 2-611
show vlan private-vlan command output fields 2-624
show vlans command output fields 2-627
show vtp command output fields 2-629
special characters
multipliers, table 1-9
special characters used for anchoring 1-10
speed command options 2-671
supported duplex command options 2-127
supported speed command options 2-672
time-based sampling intervals 2-309
TAC
displaying information 2-602
tag-to-tag load balancing
disabling 2-319
enabling 2-319
TCAM
debugging spanning tree activities 2-98
disabling debugging 2-108
displaying
interface-based information 2-600
protocol-based information 2-600
statistical information 2-598
enabling debugging 2-108
prioritizing interfaces 2-714
TCL
displaying MLS information 2-538
TDR
displaying cable diagnostic test results 2-386
running cable diagnostics 2-716
temperature readings
displaying information 2-411
Ternary Content Addressable Memory
time-based ACLs
configuring
time ranges 2-719
enabling 2-719
removing
time limitation 2-719
time domain reflectometry
time-range command 2-719
tracking
configuring
designated router 2-678
transmit-queue
setting size ratio 2-764
traps, enabling 2-635
troubleshooting
displaying information 2-602
trunk characteristics
adding VLANs 2-706
displaying information 2-458
removing VLANs 2-706
resetting to defaults 2-706
setting 2-706
trunks
setting
trunk Ethertype value 2-692
U
UDLD
aggressive mode
disabling globally on fiber interfaces only 2-721
disabling on an interface 2-723
enabling globally on fiber interfaces only 2-721
enabling on an interface 2-723
disabling debugging 2-109
disabling interface 2-723
enabling debugging 2-109
global configuration mode
enabling on fiber interfaces only 2-721
interface configuration mode
enabling on interface 2-723
resetting all ports shut down by UDLD 2-726
unicast entries
fast-aging time
configuring 2-234
restoring to defaults 2-234
long-aging time
configuring 2-235
restoring to defaults 2-235
normal-aging time
configuring 2-236
restoring to defaults 2-236
unicast flood protection
configuring 2-224
displaying information 2-495
Unidirectional Link Detection Protocol
user EXEC mode, summary 1-5
usernames
configuring 2-731
setting password 2-731
setting privilege level 2-731
V
VACL logging
configuring
logging parameters 2-744
logging threshold 2-744
log table size 2-744
parameters 2-744
redirect packet rate 2-744
disabling debugging 2-111
displaying
configuration information 2-613
flow table contents 2-613
logging property information 2-613
enabling debugging 2-111
log table size 2-744
redirect packet rate 2-744
returning to default logging values 2-744
returning to default values 2-744
threshold 2-744
VACLs
applying VLAN access maps 2-752
creating
VLAN access map 2-746
defining extended MAC access lists 2-219
disabling capture function 2-688
disabling debugging 2-110
enabling capture function 2-688
enabling debugging 2-110
entering
VLAN access-map mode 2-746
packet action
dropping 2-2
forwarding 2-2
redirecting 2-2
setting 2-2
specifying
access-map sequence 2-226
match clause 2-226
VLAN 1 minimalization
command 2-706
usage guideline 2-708
VLAN access control lists
VLAN access-map command mode
entering 2-746
VLAN database
entering 2-748
resetting 2-358
VLAN debugging
debugging 2-60
disabling debugging 2-60
VLAN manager
debugging 2-103
disabling debugging 2-103
IOS file system error tests
debugging 2-104
disabling debugging 2-104
VLANs
adding 2-739
clearing
counters 2-48
hardware logic 2-24
configuring 2-736
ARE hops 2-736
backup CRF mode 2-736
bridging characteristics 2-736
FDDI ring number 2-736
internal allocation scheme 2-754
media type 2-736
MTU size 2-736
parent VLAN ID 2-736
SAID identifier 2-736
state 2-736
STP type 2-736
Token Ring number 2-736
translational ID 2-736
VLAN name 2-736
config-VLAN submode
configuring 2-736
deleting 2-736
entering 2-736
specifying RSPAN 2-736
disabling
dot1q tagging 2-750
displaying
CEF information 2-470
CEF next-hop information 2-470
Cisco IOS VLAN subinterface information 2-626
configuration information 2-613
current operating information 2-579
dot1q tagging information 2-617
filter information 2-618
flow table contents 2-613
internal VLAN allocation information 2-620
internal VLAN status 2-609
Layer 2 VLAN information 2-609
logging property information 2-613
mapping 2-622
RSPAN VLANs 2-625
software-cached counter values 2-616
total number of interface VLANs 2-455
enabling
dot1q tagging 2-750
entering configuration mode 2-739, 2-748
erasing the VLAN database configuration file 2-129
implementing database 2-5
implementing new database 2-5
incrementing configuration number 2-5
mapping to ISL VLANs 2-756
mapping to MST instance 2-150
removing ISL VLAN mapping 2-756
restarting local traffic 2-631
shutting down local traffic 2-631
voice VLANs
configuring on switch ports 2-710
removing
from switch ports 2-710
VTP
client mode
setting 2-758
displaying
domain information 2-628
statistics information 2-628
domain name
setting 2-758
global configuration mode
setting domain name 2-758
setting IFS file 2-758
setting mode 2-758
setting preferred updater ID source 2-758
IFS file system
setting 2-758
password
specifying 2-758
preferred updater ID source
setting 2-758
pruning
disabling 2-758
enabling 2-758
server mode
setting 2-758
transparent mode
setting 2-758
version
setting 2-758
VTP domain
linking 2-308
removing 2-308
VTP protocol code
activating debug messages 2-106
deactivating debug messages 2-106
W
WAN
displaying bootflash information 2-397
displaying statistical information 2-397
displaying VLAN-to-WAN interface mapping 2-397
watch list
adding IP address 2-163
clearing entries 2-26
configuring 2-163
disabling 2-163
displaying 2-461
enabling 2-163
setting
maximum login attempts 2-162
WCCP
disabling
mask assignment hardware acceleration 2-201
packet redirection 2-200
displaying
global statistics 2-480
inband packet count 2-427
enabling
mask assignment hardware acceleration 2-201
packet redirection 2-200
Web Cache Coprocessor Protocol
weighted random early detection
weighted round robin
WRED
specifying maximum threshold 2-766
write erase command
See erase command 2-129
WRR
returning to default queue values 2-766
setting transmit queue size ratio 2-764
specifying maximum threshold 2-766