Feedback
Table Of Contents
Unpacking and Repacking the Cisco 12008
Cisco 12008 Packaging Materials
Unpacking and Repacking the Cisco 12008
This appendix presents information about the shipping container for the Cisco 12008.
The shipping container, which includes a shipping pallet and an accessories box, has the following specifications:
•
Width—25.3 inches (64.3 cm)
•
•
•
It is recommended that you save the original shipping container for the router should it become necessary at some later time to move the router to another location.
If your original shipping container has been damaged or discarded, you must order a replacement system packaging kit (order number PKG-GSR8=) in order to safely ship the router to another location.
Cisco 12008 Packaging Materials
The packaging materials for the Cisco 12008 consist of the following items:
•
•
•
•
•
•
The cardboard box slides over the cardboard sleeve, which fits snugly over the shipping pallet, as indicated in .
Figure A-1 Components of the Cisco 12008 Packaging System
Unpacking/Packing Tools
For visual guidance in unpacking or repacking the Cisco 12008, refer to .
CautionTo prevent damage, never attempt to lift or tilt the Cisco 12008 using the handles on the power supplies. These handles are not designed to support the weight of the router
You need the items in to unpack or pack the Cisco 12008.
Table A-1 Cisco 12008 System Packaging Tools
