Table Of Contents
Readme for QoS Policy Manager 4.1.1 on Windows
Description
Related Documentation
New Features
Enhanced Features
Command Support
Device Support
Hardware and Software Requirements
Downloading and Installing QPM 4.1.1
Downloading from Cisco.com
Installing QPM 4.1.1
Known Problems
Resolved Problems
Readme for QoS Policy Manager 4.1.1 on Windows
This Readme is for CiscoWorks QoS Policy Manager (QPM) 4.1.1 running on a windows platform. This Readme contains the following sections:
•
Description
•Related Documentation
•New Features
•Enhanced Features
•Command Support
•Device Support
•Hardware and Software Requirements
•Downloading and Installing QPM 4.1.1
•Known Problems
•Resolved Problems
Description
CiscoWorks QoS Policy Manager 4.1.1 is a maintenance release that enhances the functionality of QoS Policy Manager 4.1 by providing:
•Support for new features
•Enhancements to existing QPM 4.1 features
•Command support
•Device support
QPM 4.1.1 is a patch release, and you can install it on top of QPM 4.1.
Related Documentation
QPM 4.1.1 is a maintenance release after QPM 4.1. The most updated documentation for QPM 4.1.1 and QPM 4.1 can be found on Cisco.com:
•Supported Devices and Software Releases for QoS Policy Manager 4.1.1
http://www.cisco.com/en/US/products/sw/cscowork/ps2064/
products_device_support_tables_list.html
•Installation Guide for CiscoWorks QoS Policy Manager 4.1 on windows
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/installation/guide/windows/QPM41WIN.html
•Getting Started Guide for CiscoWorks QoS Policy Manager 4.1
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/getting_started/guide/qpm41gsg.html
•Quick Start Guide for CiscoWorks QoS Policy Manager 4.1.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/quick_start/guide/qpm41qsg.html
•Readme for CS 3.2 with QoS Policy Manager 4.1.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/readme/CS32RMe.html
•User Guide for QoS Policy Manager 4.1
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/user/guide/qpm41ug.html
New Features
QPM 4.1.1 includes the following new features:
•NBAR PDLM Protocol Discovery—Enables you to add, import, edit, or delete new NBAR supported protocols. You can also add new parameter values to the existing set of NBAR supported protocols.
When you add support for a new protocol to a device, the Protocol Discovery Language Module (PDLM) is updated on the device. You can add these newly supported NBAR protocols on the device to the QPM user interface.
•VLAN Monitoring—Enables you to monitor VLAN interfaces that are based on CBQoS MIB. QPM supports both real time and historical monitoring jobs for VLAN interfaces.
•Catalyst 6000 Device Discovery—Enables you to easily locate Cat 6000 devices that support PISA cards from Cat 6000 devices that support other cards. QPM user interface displays the Catalyst 6000 (Cat 6000) devices that enclose a PISA card with a "with PISA" suffix to their display names.
For example, the display name of a Cat 6000 device with PISA card support appears in the Device Summary page as:
–Cat6000_PFC3 (IOS) with PISA
Whereas, the display name of a Cat 6000 device that supports other cards appears in the Device Summary page as:
–Cat6000_PFC3 (IOS)
•Object Selector Filter Options—Enables you to search for one or more objects in an object selector. You can search for objects, based on the object categories. You can also edit or delete the objects that appear as a result of the Filter operation.
•Match VLAN Support—Enables you to define or remove VLAN IDs to specify a VLAN condition in the current traffic classifier rule.
You can set up to 30 VLAN IDs in a single VLAN condition. The range of VLAN IDs that you can set depends on the device type. VLAN ID ranges for various device types are:
–IOS devices—1 to 1500
–CAT devices—1 to 4094
–7600 devices—1 to 4095
To add or modify a VLAN condition to a device, you must set at least one VLAN ID in each VLAN condition.
Enhanced Features
QPM 4.1.1 provides enhancements to the Table Pagination feature in QPM 4.1. The 4.1.1 release has new controls to the QPM tables.
The table header includes a Rows per page drop down list that enables you to set the number of rows that can appear on a single table page. You can set the following values in the Rows per page drop down list: 10, 25, 50, 100, and All. The default value is 10.
The table footer includes page navigation controls that enable you to navigate across multiple table pages. If a table consists of only one page, the navigation controls are disabled.
Command Support
QPM 4.1.1 not only supports the commands supported in QPM 4.1, but also the following new commands:
•rcv-queue cos-map queue-id threshold-id [cos-1 ...cos-n]
•priority-queue queue-limit weight
•qos dbl
•qos dbl exceed-action ecn
•mls qos srr-queue input dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id dscp1...dscp8}
•mls qos srr-queue output dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id dscp1...dscp8}
•queue-set qset-id
•wrr-queue random-detect queue-id
In addition to these new commands, this release also adds IOS XR command support for the CRS and the GSR devices.
Device Support
QPM 4.1.1 not only supports the devices supported in QPM 4.1, but also the Cisco 860 Series and 880 Series Routers
Table 1 shows the device OIDs and names of the additional devices supported by QPM 4.1.1.
Table 1 Additional Devices Supported by QPM 4.1.1
Cisco System Device
|
Device OID
|
Device Name
|
Supported OS
|
Cisco 860 Series
|
|
Cisco 860 Series Routers
|
|
1.3.6.1.4.1.9.1.834
|
Cisco 861Integrated Services Router
|
12.4
|
1.3.6.1.4.1.9.1.835
|
Cisco 866 Router
|
12.4
|
1.3.6.1.4.1.9.1.836
|
Cisco 867 Integrated Services Router
|
12.4
|
Cisco 880 Series
|
|
Cisco 880 Series Routers
|
|
1.3.6.1.4.1.9.1.837
|
Cisco 881 Integrated Services Router
|
12.4T
|
1.3.6.1.4.1.9.1.842
|
Cisco 886 Integrated Services Router
|
12.4T
|
1.3.6.1.4.1.9.1.847
|
Cisco 887 Integrated Services Router
|
12.4T
|
1.3.6.1.4.1.9.1.852
|
Cisco 888 Integrated Services Router
|
12.4T
|
1.3.6.1.4.1.9.1.859
|
Cisco 885 Integrated Services Router (885-D-3)
|
12.4T
|
1.3.6.1.4.1.9.1.861
|
Cisco 885 Integrated Services Router (885-E/J-3)
|
12.4T
|
Cisco 1800 Series
|
|
Cisco 1800 Series Integrated Services Routers
|
|
1.3.6.1.4.1.9.1.902
|
Cisco 1861 Integrated Services Router (C1861-UC-2BRI-K9)
|
12.3
|
1.3.6.1.4.1.9.1.903
|
Cisco 1861 Integrated Services Router (C1861-UC-4FXO-K9)
|
12.3
|
1.3.6.1.4.1.9.1.904
|
Cisco 1861 Integrated Services Router (C1861-SRST-B/K9)
|
12.3
|
1.3.6.1.4.1.9.1.905
|
Cisco 1861 Integrated Services Router (C1861-SRST-F/K9)
|
12.3
|
1.3.6.1.4.1.9.1.939
|
Cisco 1861 Integrated Services Router (C1861-SRST-C-B/K9)
|
12.3
|
1.3.6.1.4.1.9.1.940
|
Cisco 1861 Integrated Services Router (C1861-SRST-C-F/K9)
|
12.3
|
1.3.6.1.4.1.9.1.990
|
Cisco 1861 Integrated Services Router (C1861W-SRST-F/K9)
|
12.3
|
1.3.6.1.4.1.9.1.991
|
Cisco 1861 Integrated Services Router (C1861W-SRST-B/K9)
|
12.3
|
1.3.6.1.4.1.9.1.992
|
Cisco 1861 Integrated Services Router (C1861W-SRST-C-F/K9)
|
12.3
|
1.3.6.1.4.1.9.1.993
|
Cisco 1861 Integrated Services Router (C1861W-SRST-C-B/K9)
|
12.3
|
1.3.6.1.4.1.9.1.994
|
Cisco 1861 Integrated Services Router (C1861W-UC-4FXO-K9)
|
12.3
|
1.3.6.1.4.1.9.1.995
|
Cisco 1861 Integrated Services Router (C1861W-UC-2BRI-K9)
|
12.3
|
Cisco CRS
|
|
Cisco Carrier Routing Systems
|
|
| |
1.3.6.1.4.1.9.1.738
|
CRS-1 Multishelf System
|
IOS XR 3.3 and 3.4
|
Cisco XR 12000 Series
|
|
Cisco XR 12000 Series Routers
|
|
1.3.6.1.4.1.9.1.388
|
Cisco XR 12406 Router
|
IOS XR 3.6.1, 3.7.0, 3.7.1
|
1.3.6.1.4.1.9.1.394
|
Cisco XR 12410 Router
|
IOS XR 3.6.1, 3.7.0, 3.7.1
|
1.3.6.1.4.1.9.1.478
|
Cisco XR 12810 Router
|
IOS XR 3.6.1, 3.7.0, 3.7.1
|
1.3.6.1.4.1.9.1.273
|
Cisco XR 12016 Router
|
IOS XR 3.6.1, 3.7.0, 3.7.1
|
For details regarding the QoS feature support for these devices, see the detailed Supported Devices Table for QPM 4.1.1 at http://www.cisco.com/en/US/products/sw/cscowork/ps2064/
products_device_support_tables_list.html
Table 2 shows the additional cards supported by QPM 4.1.1.
Table 2 Additional Cards Supported by QPM 4.1.1
Card Name
|
Type
|
Cisco 7600 Series OSM-2+4GE-5PACK+
|
Line Card
|
Hardware and Software Requirements
QoS Policy Manager 4.1.1 requires that you have installed QoS Policy Manager 4.1. All of these applications run on Common Services (CS) 3.2 server.
The hardware and software requirements for QPM 4.1.1 are the same as for QPM 4.1.
For detailed list of requirements and instructions to install CS 3.2 and QPM 4.1 on windows, see http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/installation/guide/windows/QPM41WIN.html
Downloading and Installing QPM 4.1.1
You can download the QPM 4.1.1 installer file, qpm4_1_1_win.zip, from Cisco.com, and install it on a machine that has QPM 4.1 already installed.
Note You should have a valid Cisco.com username and password to download the installer file.
The following topics describe the download and installation process of QPM 4.1.1:
•Downloading from Cisco.com
•Installing QPM 4.1.1
Downloading from Cisco.com
To download the QPM 4.1.1 installer file from Cisco.com:
Step 1 Go to http://www.cisco.com/pcgi-bin/tablebuild.pl/qos-patches.
You should enter your Cisco.com credentials to access this page.
Step 2 Locate the file qpm4_1_1_win.zip from the list of files to be downloaded.
Step 3 Right-click the file, select Save Target As or Save Link As, and specify the location to download the file to your machine.
Installing QPM 4.1.1
QPM saves the Historical Monitoring data at the end of every hour. Therefore, before you install QPM 4.1.1 over QPM 4.1, wait till the end of the hour. This is to allow QPM to save the data associated with any Historical Monitoring tasks that are running.
The monitoring tasks will be resumed after you install QPM 4.1.1 and restart the CiscoWorks daemon.
To install QPM 4.1.1 on the machine that has QPM 4.1 already installed:
Step 1 Go to the folder where you have downloaded the installer file, qpm4_1_1_win.zip
Step 2 Unzip the file qpm4_1_1_win.zip
This extracts a folder called qpm4_1_1_win.
Step 3 Go to qpm4_1_1_win, which contains the executable file.
Step 4 Launch the installer. Either:
•Double click the executable file, qpm4_1_1_win.exe.
Or
•Select Start > Run, and enter path\qpm4_1_1_win.exe,
where path is the location of the file in your hard drive.
The Installer window appears.
Step 5 Click Install to continue.
The Welcome window appears.
Step 6 Click Next to continue.
The Software License Agreement window appears.
Step 7 Click either:
•Accept to accept the license agreement and proceed with the installation,
Or
•Do not Accept to deny and stop the installation.
The System Requirements window appears.
Step 8 Check whether your system meets the requirements and click Next to continue.
The Summary window appears with the summary of settings for the installation.
Step 9 Click Next to continue.
The Daemons Restart Options window appears.
Step 10 Click either:
•Yes to restart the CiscoWorks daemon after this installation
Or
•No to deny restart of Ciscoworks daemon after this installation (to allow installation of any other CiscoWorks applications)
The Setup Complete window appears.
Step 11 Click Finish to complete the installation.
You must restart the CiscoWorks daemon before you begin to work with QPM. The QPM services start automatically whenever you start your computer.
Known Problems
Table 3 describes the known problems in QPM 4.1.1.
Table 3 Known Problems in QPM 4.1.1
Bug ID
|
Summary
|
Explanation
|
CSCsm38123
|
Service-Policy command is not deployed on a device with the following configuration:
Device Model: Cat6000_PFC1(IOS)
Interface: Cat6509 GigEthernet port.
IOS Version: 12.2(17r)S4
|
This occurs when you deploy the Service-Policy command on the specified device.
A message appears on the Local Preview page in QPM that the Service-Policy command has been deployed successfully.
However, if you enter the Service-Policy command on the device in the CLI mode, you find that the policy is not deployed.
Workaround:
None.
|
CSCsq12042
|
Firefox: Buttons do not work after you create and deploy policies and assign threshold sets.
|
This occurs when you:
1. Create a policy and a deployment job for any one of the following policies:
–Custom policy
–Voice policy
–AutoQoS policy
2. Assign a threshold set.
The buttons do not work in any of the pages.
Workaround:
1. Click Dashboard to return to the Main Menu.
2. Return to the Policy Deployment page from the Main Menu
All buttons work.
|
CSCsq67358
|
QPM Dashboard on LMS does not load all portlets, initially.
|
This occurs when you have not added the portlets to the QPM view in LMS.
Workaround:
Add all portlets to QPM view in LMS and save the view. This setting will be preserved.
|
CSCsq81508
|
TelePresence: OC3 Interfaces on non-SOP modules are not listed in the Define Circuit page.
|
This occurs when you:
1. Import a device with OC3 connection.
2. Choose TelePresence > Circuit Table.
3. Create a TelePresence circuit for OC3 interface.
4. Choose OC3 from the Select the interface drop-down list.
5. Click Next.
The Define Circuit page appears. This page lists the start and end points of the circuit. It does not display OC3 interfaces.
Workaround:
None.
|
CSCsr04020
|
IE 7.0 browser—CPU usage is high when 2000 or more devices are listed in the Tree View.
|
IE 7.0 uses a higher percentage of CPU compared to IE 6 or FireFox 2.x.
When you continuously use the Tree View device selector (listing 2000 or more devices), IE 7.0 sometimes uses 100% of CPU.
Workaround:
You can either:
•Go to some other QPM page that does not have the Tree View device selector.
Or
•Close and open IE.
|
CSCsr17121
|
Show Run option in Device Properties page does not work in ACS mode.
|
This occurs when you:
1. Register QPM with ACS (custom privilege with all permissions enabled).
2. Go to the Device Summary page of a device.
3. Click Show Run.
A new page appears with a QPM error.
Workaround:
None.
|
CSCsr25139
|
IE 7.x: Copy policy group option opens a new page with a QPM error.
|
This occurs when you:
1. Choose Provisioning > Policy Management > Policy Groups.
2. Select a policy group and click Copy.
A new page appears with a QPM error.
Workaround:
To view the policy:
1. Close the QPM error page.
2. Choose Provisioning > Policy Management > Policy Groups.
The Policy Groups page lists the copied policy.
|
CSCsu01936
|
TelePresence Circuits are not available for 7200 devices with IOS version 12.3 or lower.
|
This occurs when you:
1. Choose Provisioning > TelePresence > Circuit Table.
2. Click Create a Circuit.
3. Enter a circuit name, select interface type, and configure circuit and class utilization notifications.
4. Click Next.
The Monitoring Job page appears.
5. Choose Monthly from the Job frequency drop-down list.
6. Click Next and Finish to save the configuration.
The TelePresence Circuit does not appear in the TelePresence Circuit table.
Workaround:
This problem occurs in 7200 devices with IOS version 12.3 or lower.
•If the IOS version is lower than 12.3, map the 7200 device to IOS 12.3.
•If the IOS version is 12.3, map it to a higher version.
To map the 7200 device to 12.3 or higher version:
1. Choose Devices > Device Summary.
2. Click the device hyperlink.
The Device Summary General Information page appears.
3. Choose 12.3 or a higher version in the Mapped OS drop-down list.
4. Click Save.
|
CSCsu35483
|
Policy deployment for 10,000 devices—Pending Jobs page causes the Tomcat memory to grow over 1 GB.
|
This occurs when you:
1. Create a single deployment job for 10,000 devices.
The UI control returns to the Pending Jobs page.
2. Continue to work on the Pending Jobs page for three or four hours.
The Tomcat memory grows over 1 GB and slows down server performance.
Workaround:
After you create the job, exit out of the Pending Jobs page.
This stops the Tomcat memory growth and the used memory comes down after sometime.
|
CSCsw81908
|
Unable to select multiple rows (spread across multiple table pages) at a time in the pagination tables.
|
This occurs when you:
1. Go to a pagination table that contains more than 10 rows.
Examples of a pagination table are Import from DCR table, Network Element Assignment table, Completed Jobs table, and so on.
2. Check the Common Selection check box and click the right arrow button in the navigation controls.
The next table page appears.
3. Click the left arrow button to go to the previous page.
The user interface does not preserve the selection that you have made in Step 2.
This also occurs when you:
1. Go to a pagination table that contains more than 10 rows.
Examples of a pagination table are Import from DCR table, Network Element Assignment table, Completed Jobs table, and so on.
2. Check the Common Selection check box and click the right arrow button in the navigation controls.
The next table page appears.
3. Click any one of the buttons on this table page without selecting an item from the table.
An alert message appears corresponding to the button that you have clicked. This alert message informs you that the application is not able to work with multiple table pages at this time.
Workaround:
1. Go to a pagination table that contains more than 10 rows.
2. Select All from the Rows Per Page drop down list.
3. Click Go.
All items in the table appear in a single table page.
|
CSCsy92835
|
QPM does not support the trust-dscp command for CBQoS.
|
This occurs when you:
1. Create a policy for Cat6k.
2. Select the scheduling type as CBQoS in Qos properties page.
3. Create the IN traffic rule.
In Marking, QPM does not enable the trust option.
Workaround:
None
|
CSCsy83986
|
Cannot delete Timed ACL from the Policy.
|
This occurs when you:
1. Create a policy in QPM with a Timed ACL.
2. Edit the policy and try to delete the Timed ACL
A message appears that there is an error on the page.
Workaround:
1. Delete the traffic classifier rule and create a new traffic classification.
2. Replace the existing timed-acl with a new Timed ACL
|
CSCsw18111
|
While applying an FRTS policy to a Cat 1720 device, an error appears in the Debug mode.
|
This occurs when you:
•Apply an FRTS policy to a Cat 1720 device.
The following exception appears:
com.cisco.nm.qpm.server.policy.exceptions.ContradictingCapabilitiesException occured in: /qpm/servlet/com.cisco.nm.qpm.web.policy.group.wizard.servlet.PGDefinitionWizardServlet
Workaround:
None
|
CSCsy84636
|
If you deselect an object, it is not removed from the object selectors in the Device View Device Summary and the Device Folder pages
|
This occurs when you:
1. Go to Devices > Device Grouping > Device Folders.
2. Select a device folder from the table and Click Edit.
The Device Folder Properties Page appears.
3. Deselect a device from the device folder and click Save.
4. Select the device folder that you have edited in Step 3 and click Edit.
The device that you have removed from the device folder in Step 3 still appears under the device folder.
This also occurs when you:
1. Go to Devices > Device Management > Device Summary
2. Expand a device and select a few interfaces in this device.
3. Expand another device and select a few interfaces in this device.
4. Deselect the interfaces from the device that you have selected in Step 2.
5. Click Show QoS Capabilities.
The deselected interfaces also appear in the Qos Capabilities report.
Work around
After you deselect an object from the Object selector, collapse the parent object of the deselected object to preserve the changes.
|
Resolved Problems
Table 4 describes some of the problems resolved since the last release of QPM.
Table 4 Resolved Problems in QPM 4.1.1
BugID
|
Summary
|
Additional Information
|
CSCsm12489
|
The Edit option in the Tree View device selector did not work.
|
This problem has been resolved.
|
CSCsm14370
|
In Real Time and Historical Monitoring charts, the option to view the chart with a logarithmic vertical axis did not work
|
This problem has been resolved.
|
CSCsm46162
|
System Name was not displayed fully in the Network Assignment Element page.
|
This problem has been resolved.
|
CSCso47414
|
Chart legends were sometimes displayed vertically.
|
This problem has been resolved.
|
CSCsq26633
|
QPM did not retrieve Display Name and Domain Name information from Common Services' DCR.
|
This problem has been resolved.
|
CSCsq55659
|
Nested policies Hierarchical QoS ClassMaps page did not have a scroll bar.
|
This problem has been resolved.
|
CSCsq60783
|
Search, Selection, and Filter options were not in any of the Tree View device selectors.
|
This problem has been resolved.
|
CSCsq60862
|
If you resized the browser scroll bars were not created.
|
This problem has been resolved.
|
CSCsq88389
|
Search and selection options in the Tree View policy selector were not fully functional.
|
This problem has been resolved.
|
CSCsr03804
|
Policy Templates: Constraints Definition link was disabled.
|
This problem has been resolved.
|
CSCsr03820
|
Constraint Definition, QoS Properties, and Traffic Rules pages were not visible while creating policy using the Attach Policy Template option.
|
This problem has been resolved.
|
CSCsr43606
|
QPM did not list the interfaces of selected devices in Voice Policy.
|
This problem has been resolved.
|
CSCsu20996
|
Device Discovery process took a long time for Bulk Device Import (10,000).
|
This problem has been resolved.
|
CSCsu26699
|
Device Group was not set after ACS integration in Policy View page.
|
This problem has been resolved.
|
CSCsu44813
|
QPM did not display PortQoS devices in the Tree View device selector under Real Time QoS Monitoring for the first time after a fresh installation.
This occurred when QPM inventory has only PortQoS-supported devices.
|
This problem has been resolved.
|
CSCsu47379
|
CbQoS historical monitoring jobs could be created after you upgraded to QPM 4.1.
|
This problem has been resolved.
|
CSCsq28775
|
For devices that already had display names in DCR, QPM user interface displayed the IP addresses instead of the display names specified in DCR.
|
This problem has been resolved.
|
CSCsr04179
|
QPM documentation did not specify real time monitoring hard limit.
|
This problem has been resolved.
|
CSCsv68575
|
The units of measurement of the data values in the exported graph report were different from the units of measurement of the data values in the actual graph report.
|
This problem has been resolved.
|
CSCsw80246
|
In SSL mode, the Real Time monitoring chart displayed an http 2032 error.
|
This problem has been resolved.
|
CSCsx06087
|
During class-map configuration, if you used the Traffic Rule Creation workflow, QPM displayed the Bandwidth remaining percent error even when the cumulative bandwidth equaled 100%.
|
This problem has been resolved.
|
CSCsw66015
|
QPM did not create the DSCP Markings for Cat2950 Policies.
|
This problem has been resolved.
|
CSCsv91443
|
QPM displayed an unknown error while creating a policy from the inventory on the cat6509 device with IP3Q8T.
|
This problem has been resolved.
|
CSCsu94758
|
After deploying a blank policy on a device, QPM did not delete some commands that existed in the previous policy.
|
This problem has been resolved.
|
CSCsw27440
|
In the Policy Description page, the image icon corresponding to the disabled policies did not appear correctly in the Traffic Rules table.
|
This problem has been resolved.
|
CSCsm14567
|
Scroll bars did not appear in the content area and the wizard pages of the QPM user interface.
|
This problem has been resolved.
|
CSCsm87782
|
The QPM QoS import report table did not display the start time.
|
This problem has been resolved.
|
CSCsy54083
|
QPM did not display the police percent option for ASR1000 if it was running IOS 12.2.
|
This problem has been resolved.
|
CSCsr76618
|
QPM did not import hierarchal QoS monitoring policies that were attached to the tunnel interfaces.
|
This problem has been resolved.
|
CCDE, CCSI, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0903R)
Feedback
