Table Of Contents

Uninstalling CWM Components

Uninstalling CWM Components

---

This chapter describes how to uninstall the various components that make up CWM.

To uninstall a CWM component, perform the following procedure.

---

Step 1 Stop the CWM core (and the Wandest core if it is installed).

Step 2 Change user to root.

Step 3 Navigate to /usr/users/svplus to uninstall the CWM Server, the SCMSA server, or the SNMP Agent
Navigate to /usr/users/wandest to uninstall Wandest server or client

The scripts stored at /usr/users/svplus are:

•CWM Server UnInstallCWM.sh

•SCMSA - UnInstallSCMSA.sh

•SNMPAgent - UnInstallAgent.sh

•RTM Proxy - UnInstallRTMProxy.sh

The scripts stored at /usr/users/wandest are:

•Wandest Server - UnInstallWDClient.sh

•Wandest Client - UnInstallWDServer.sh

Step 4 Execute the appropriate script, such as the following:

./UnInstallSCMSA.sh

The following window appears.

Console Mode Option is recommended when you cannot connect to X Server 

 from current terminal ( See if you can open an xterm to check ! ) 

 Do you Want to Launch Uninstaller in Console Mode ? (Yes / No ): [No] :y

Step 5 Respond No then Enter to continue the uninstall using the Uninstallshield GUI.
Respond Yes then Enter to continue the uninstall using Console Mode Install.

Console Mode Install is a command line script procedure. It is an alternative to the GUI and is intended for users who do not have access to an X window device. Using Console Mode uninstall, the user can uninstall a CWM component using an alpha-numeric terminal or a PC in terminal emulator mode. To uninstall in Console Mode, follow the instructions as they are displayed on the screen. For more details about Console Mode, see "Installing the CWM Software."

In Installshield GUI mode, the Uninstaller window appears.

Step 6 Click Next. The Uninstaller window appears, showing the location from which the CWM (or the CWM components) will be uninstalled and the features that will be uninstalled.

Step 7 Click Next. The Uninstaller window appears, confirming that the uninstallation has started. When the uninstall complete, a confirmation window appears.

Step 8 Click Finish to complete the process.

You must repeat the above procedure for each module to be uninstalled.

During the uninstallation process, some warning messages such as "Unable to delete locked files /usr/users/svplus/..." may be displayed on the console. Such messages can be ignored.

---