Cisco IOS XR System Error Message Reference Guide, Release 3.8.1 - Quality of Service (QoS) Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Quality of Service (QoS) Messages

QOS_EA_TEST Messages

QOS_MA Messages

QOS Messages

QOSEA Messages

QOSRM_DLL Messages

QOSRM Messages

Quality of Service (QoS) Messages

This section contains all Quality of Service related System Error Messages.

QOS_EA_TEST Messages
Error Message     
%QOS-QOS_EA_TEST-3-ERROR QoS EA test error ocured at function [chars]: [chars]
Explanation The QoS EA test process encountered the specified error
Recommended Action None

QOS_MA Messages
Error Message     
%QOS-QOS_MA-3-CAPS_INFO_ADD QoS MA caps add failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], service_policy: [chars], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to add the caps.
Recommended Action None
Error Message     
%QOS-QOS_MA-3-CAPS_REMOVE QoS MA caps remove failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to remove the caps.
Recommended Action None
Error Message     
%QOS-QOS_MA-3-DPC_REM QoS MA DPC (delete) failed: ifhandle: [hex], caps: [unsigned int], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to send a critical operation to the EA.
Recommended Action None
Error Message     
%QOS-QOS_MA-3-OP_FAIL [chars] Error [hex]:[chars]
Explanation A critial operation attempted by QoS MA has failed. It may affect the proper functioning of QoS features.
Recommended Action None.
Error Message     
%QOS-QOS_MA-7-FABQOS_SEND_FAILED The switch-fabric service policy '[chars]' was not accepted correctly by the EA. Error: [chars]
Explanation The QoS MA process encountered the specified error upon startup or restart. The EA did not process the FABQOS policy correctly.
Recommended Action None
Error Message     
%QOS-QOS_MA-7-INIT QoS MA initialisation failed in function [chars]: [chars]
Explanation The QoS MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the QoS MA process.
Recommended Action None
Error Message     
%QOS-QOS_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.
Explanation The QoS MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the QOS MA DB. This could be the result of an incorrect operation in the'verify' phase.
Recommended Action None
Error Message     
%QOS-QOS_MA-7-INVALID_ERROR_ARRAY_STATUS The dpc error array '[hex]' and caps error array '[hex]' have invalid codes at the same index '[dec]'.
Explanation An internal error was encountered while processing QoS configuration.
Recommended Action None

QOS Messages
Error Message     
%QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars]
Explanation The router cannot allocate more memory.
Recommended Action It may be necessary to free some memory by exiting a program.
Error Message     
%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]
Explanation Connection to some server failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services
Explanation Error occurred while waiting for an event.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-EA_IIR_ATTACH_FAILURE Error encountered during QoS programming for bundle member [chars] (ifh: [hex]) of bundle CH[hex], direction: [chars], error: [chars]
Explanation A member was added to the bundle or it was added earlier and link came up now. This triggers update event and an error is encountered in QoS EA process while handling update event for the bundle member.
Recommended Action If its scaled config exhausting h/w resources, try reducing number of targets for QoS policies.
Error Message     
%QOS-QOS-3-EA_IM_CAPS_RESYNC_FAILURE Error encountered during caps resync with IM for interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]
Explanation QoS EA encountered an error during resync of QoS capsulations with IM.
Recommended Action Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.
Error Message     
%QOS-QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY Error encountered during rollback of policy modification on interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]
Explanation QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.
Recommended Action Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.
Error Message     
%QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager
Explanation Failed to create event manager.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event
Explanation Error occurred while waiting for an event.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]
Explanation An error (other than EINTR) occured in the event loop. The process has exited and restarted.
Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*
Error Message     
%QOS-QOS-6-EA_DEBUG_INIT_FAIL Failed to initialise debug infra within QoS EA. Error: [chars]
Explanation Debug initialization failed within EA. Debugs may not be printed
Recommended Action Try restarting QoS EA process
Error Message     
%QOS-QOS-6-EA_LTRACE_INIT_FAIL Failed to initialise ltrace infra within QoS EA. Error [chars]
Explanation Ltrace initialization failed within EA. Ltraces may not be printed
Recommended Action Try restarting QoS EA process
Error Message     
%QOS-QOS-6-EA_MIPC_NTFN_ACK_FAILURE Error encountered while trying to ACK to an MIPC event notification [unsigned int]. Error [chars]
Explanation QoS EA encountered an error while ACKing to an MIPC event
Recommended Action Try restarting QoS EA process
Error Message     
%QOS-QOS-6-EA_MIPC_NTFN_HNDLR_FAILURE Failed to process MIPC notification [unsigned int] within QoS EA. Error [chars]
Explanation QoS EA encountered an error while processing an MIPC event notification
Recommended Action Try restarting QoS EA and/or HFR Platform Manager process
Error Message     
%QOS-QOS-6-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q to [dec]. Dropping packet. Error: [chars]
Explanation Could not set the outgoing queue associated with this packet. As a consequence the packet is being dropped. During normal operation of the system, an occasional (very in-frequent) packet drop in the slow-path is tolerable.
Recommended Action No action is required.
Error Message     
%QOS-QOS-6-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to initialise debug infra within the qfifo node on the netio chain. Error: [chars]
Explanation Debug initialization failed within the qfifo node on the NetIO chain. Debugs may not be printed.
Recommended Action Try restarting netio process
Error Message     
%QOS-QOS-7-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]
Explanation Connection to IMP server failed during process init. This could be because QoS EA is - Unable to bind to the IMP server, - Unable to map context to connection ID, - Unable to register callback handler, or - Unable to initialise event handler for connect/ disconnect events The above situations would lead to an inability of QoS EA to process CAPS from MA (via IM/IMP infrastructure), and to a potential disconnect between the hardware/software views of the configured qos policies on the system.
Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*
Error Message     
%QOS-QOS-7-ERR_EVM_CREATE Failed to setup event manager
Explanation Failed to setup event manager.
Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

QOSEA Messages
Error Message     
%QOS-QOSEA-3-BWCHG_ERROR QOSEAERR: update bandwidth for ifh [hex] with [dec] [chars] [chars] [chars]
Explanation This is an error message from the QoS EA bandwidth changeProcess, it indicates that something has gone wrong internally in the QoS EA during bandwidth change.
Recommended Action File a DDTS
Error Message     
%QOS-QOSEA-3-ERROR QoSEA-Err: [chars]
Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in the QoS EA.
Recommended Action File a DDTS
Error Message     
%QOS-QOSEA-3-EXIT_ERROR QoSEA-Err: [chars] [chars]
Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in the QoS EA.
Recommended Action File a DDTS
Error Message     
%QOS-QOSEA-3-IMATTR_ERROR QOSEAERR: im_attr_get bandwidth [chars] [hex] Error: [chars]
Explanation This is an error message from the QoS EA bandwidth changeProcess, it indicates that something has gone wrong internally in the QoS EA during bandwidth attribute get.
Recommended Action File a DDTS
Error Message     
%QOS-QOSEA-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]
Explanation The QoS EA could not create the necessary message channel due to the given error
Recommended Action *DDTS*
Error Message     
%QOS-QOSEA-3-MSG_HANDLER_ERR An error occurred in the [chars] message handler
Explanation An error occurred during message handling in the indicated message handler
Recommended Action File a DDTS
Error Message     
%QOS-QOSEA-3-POLICY_ERROR QoSEA-Err: class:[chars], [chars]
Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong while trying to configure a service policy.
Recommended Action *NONE*
Error Message     
%QOS-QOSEA-3-ROLLBACK_ERROR QoSEA-Rollback-Err: [chars]
Explanation This is an error message from the QoS EA Process, it indicates that rollback failed in the QoS EA.
Recommended Action Pls analyse the resource availability in the LC. Remove and add the qos policy-map for the interface.
Error Message     
%QOS-QOSEA-3-UNHANDLED_MSG The QoS EA received an unhandled message
Explanation The QoS EA received a message that it was unable to handle'
Recommended Action *DDTS*
Error Message     
%QOS-QOSEA-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]
Explanation An incoming message was demuxed to the incorrect message handler
Recommended Action File a DDTS
Error Message     
%QOS-QOSEA-4-WARN QoSEA-Warn: [chars]
Explanation This is a warning message from the QoS EA Process
Recommended Action *RECUR*
Error Message     
%QOS-QOSEA-5-NOTICE QoSEA-Notice: [chars]
Explanation This is a notice message from the QoS EA Process
Recommended Action *NONE*
Error Message     
%QOS-QOSEA-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars]
Explanation This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.
Recommended Action *NONE*
Error Message     
%QOS-QOSEA-6-INFO QoSEA-Info: [chars]
Explanation This is an informational message from the QoS EA Process
Recommended Action *RECUR*
Error Message     
%QOS-QOSEA-6-MSG_ASYNC An Asynchronous message was received
Explanation The QoS EA received an asynchronous message.
Recommended Action *NONE*
Error Message     
%QOS-QOSEA-6-POLICY_INFO QoSEA-Info: class:[chars], [chars]
Explanation This is an informational message from the QoS EA Process. It indicates that something can not be configure in service policy.
Recommended Action *NONE*
Error Message     
%QOS-QOSEA-7-DEBUG QoSEA-Debug: [chars]
Explanation This is a debuging message from the QoS EA Process
Recommended Action *NONE*

QOSRM_DLL Messages
Error Message     
%QOS-QOSRM_DLL-3-ERROR QoSRM-DLL-Err: [chars]
Explanation This is an error message from the QoS RM DLL, it indicates that something has gone wrong internally in the QoS RM dll.
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM_DLL-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]
Explanation The QoS RM dll could not create the necessary message channel due to the given error
Recommended Action *DDTS*
Error Message     
%QOS-QOSRM_DLL-3-MSG_HANDLER_ERR An error ([chars]) occurred in the [chars] message handler,Msg:[hex]
Explanation An error occurred during message handling in the indicated message handler
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM_DLL-3-UNHANDLED_MSG The QoS RM dll received an unhandled message
Explanation The QoS RM dll received a message that it was unable to handle'
Recommended Action *DDTS*
Error Message     
%QOS-QOSRM_DLL-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]
Explanation An incoming message was demuxed to the incorrect message handler
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM_DLL-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]
Explanation The QoS RM dll received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM_DLL-4-WARN QoSRM-DLL-Warn: [chars]
Explanation This is a warning message from the QoS RM DLL
Recommended Action *RECUR*
Error Message     
%QOS-QOSRM_DLL-6-INFO QoSRM-DLL-Info: [chars]
Explanation This is an informational message from the QoS RM DLL
Recommended Action *RECUR*
Error Message     
%QOS-QOSRM_DLL-6-MSG_ASYNC An Asynchronous message was received
Explanation The QoS RM dll received an asynchronous message.
Recommended Action *NONE*
Error Message     
%QOS-QOSRM_DLL-7-DEBUG QoSRM-DLL-Debug: [chars]
Explanation This is a debuging message from the QoS RM DLL
Recommended Action *NONE*

QOSRM Messages
Error Message     
%QOS-QOSRM-3-ERROR QoSRM-Err: [chars]
Explanation This is an error message from the QoS RM Process, it indicates that something has gone wrong internally in the QoS RM.
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]
Explanation The QoS RM could not create the necessary message channel due to the given error
Recommended Action *DDTS*
Error Message     
%QOS-QOSRM-3-MSG_HANDLER_ERR Event: [chars] occurred in the [chars] message handler, Msg:[hex]
Explanation An error occurred during message handling in the indicated message handler
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM-3-UNHANDLED_MSG The QoS RM received an unhandled message
Explanation The QoS RM received a message that it was unable to handle'
Recommended Action *DDTS*
Error Message     
%QOS-QOSRM-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]
Explanation An incoming message was demuxed to the incorrect message handler
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]
Explanation The QoS RM received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.
Recommended Action File a DDTS
Error Message     
%QOS-QOSRM-4-WARN QoSRM-Warn: [chars]
Explanation This is a warning message from the QoS RM Process
Recommended Action *RECUR*
Error Message     
%QOS-QOSRM-6-INFO QoSRM-Info: [chars]
Explanation This is an informational message from the QoS RM Process
Recommended Action *RECUR*
Error Message     
%QOS-QOSRM-6-MSG_ASYNC An Asynchronous message was received
Explanation The QoS RM received an asynchronous message.
Recommended Action *NONE*
Error Message     
%QOS-QOSRM-7-DEBUG QoSRM-Debug: [chars]
Explanation This is a debuging message from the QoS RM Process
Recommended Action *NONE*

	Cisco IOS XR System Error Message Reference Guide, Release 3.8.1
	Quality of Service (QoS) Messages
Cisco IOS XR System Error Message Reference Guide, Release 3.8.1 Preface Overview Messages Access Control List (ACL) Messages Application Infrastructure Messages Diagnostic Messages Fabric Messages Forwarding Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages License Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Platform Messages Quality of Service (QoS) Messages Routing Messages Security Messages Services Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter Quality of Service (QoS) Messages Download the complete book Full Book PDF (PDF - 17 MB) Feedback Table Of Contents Quality of Service (QoS) Messages QOS_EA_TEST Messages QOS_MA Messages QOS Messages QOSEA Messages QOSRM_DLL Messages QOSRM Messages Quality of Service (QoS) Messages This section contains all Quality of Service related System Error Messages. QOS_EA_TEST Messages Error Message %QOS-QOS_EA_TEST-3-ERROR QoS EA test error ocured at function [chars]: [chars] Explanation The QoS EA test process encountered the specified error Recommended Action None QOS_MA Messages Error Message %QOS-QOS_MA-3-CAPS_INFO_ADD QoS MA caps add failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], service_policy: [chars], error: [chars] Explanation The QoS MA process encountered the specified error while trying to add the caps. Recommended Action None Error Message %QOS-QOS_MA-3-CAPS_REMOVE QoS MA caps remove failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], error: [chars] Explanation The QoS MA process encountered the specified error while trying to remove the caps. Recommended Action None Error Message %QOS-QOS_MA-3-DPC_REM QoS MA DPC (delete) failed: ifhandle: [hex], caps: [unsigned int], error: [chars] Explanation The QoS MA process encountered the specified error while trying to send a critical operation to the EA. Recommended Action None Error Message %QOS-QOS_MA-3-OP_FAIL [chars] Error [hex]:[chars] Explanation A critial operation attempted by QoS MA has failed. It may affect the proper functioning of QoS features. Recommended Action None. Error Message %QOS-QOS_MA-7-FABQOS_SEND_FAILED The switch-fabric service policy '[chars]' was not accepted correctly by the EA. Error: [chars] Explanation The QoS MA process encountered the specified error upon startup or restart. The EA did not process the FABQOS policy correctly. Recommended Action None Error Message %QOS-QOS_MA-7-INIT QoS MA initialisation failed in function [chars]: [chars] Explanation The QoS MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the QoS MA process. Recommended Action None Error Message %QOS-QOS_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy. Explanation The QoS MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the QOS MA DB. This could be the result of an incorrect operation in the'verify' phase. Recommended Action None Error Message %QOS-QOS_MA-7-INVALID_ERROR_ARRAY_STATUS The dpc error array '[hex]' and caps error array '[hex]' have invalid codes at the same index '[dec]'. Explanation An internal error was encountered while processing QoS configuration. Recommended Action None QOS Messages Error Message %QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars] Explanation The router cannot allocate more memory. Recommended Action It may be necessary to free some memory by exiting a program. Error Message %QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars] Explanation Connection to some server failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services Explanation Error occurred while waiting for an event. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-EA_IIR_ATTACH_FAILURE Error encountered during QoS programming for bundle member [chars] (ifh: [hex]) of bundle CH[hex], direction: [chars], error: [chars] Explanation A member was added to the bundle or it was added earlier and link came up now. This triggers update event and an error is encountered in QoS EA process while handling update event for the bundle member. Recommended Action If its scaled config exhausting h/w resources, try reducing number of targets for QoS policies. Error Message %QOS-QOS-3-EA_IM_CAPS_RESYNC_FAILURE Error encountered during caps resync with IM for interface: [chars] (ifh: [hex]), direction: [chars], error: [chars] Explanation QoS EA encountered an error during resync of QoS capsulations with IM. Recommended Action Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface. Error Message %QOS-QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY Error encountered during rollback of policy modification on interface: [chars] (ifh: [hex]), direction: [chars], error: [chars] Explanation QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface. Recommended Action Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface. Error Message %QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager Explanation Failed to create event manager. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event Explanation Error occurred while waiting for an event. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars] Explanation An error (other than EINTR) occured in the event loop. The process has exited and restarted. Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. REDUCE Error Message %QOS-QOS-6-EA_DEBUG_INIT_FAIL Failed to initialise debug infra within QoS EA. Error: [chars] Explanation Debug initialization failed within EA. Debugs may not be printed Recommended Action Try restarting QoS EA process Error Message %QOS-QOS-6-EA_LTRACE_INIT_FAIL Failed to initialise ltrace infra within QoS EA. Error [chars] Explanation Ltrace initialization failed within EA. Ltraces may not be printed Recommended Action Try restarting QoS EA process Error Message %QOS-QOS-6-EA_MIPC_NTFN_ACK_FAILURE Error encountered while trying to ACK to an MIPC event notification [unsigned int]. Error [chars] Explanation QoS EA encountered an error while ACKing to an MIPC event Recommended Action Try restarting QoS EA process Error Message %QOS-QOS-6-EA_MIPC_NTFN_HNDLR_FAILURE Failed to process MIPC notification [unsigned int] within QoS EA. Error [chars] Explanation QoS EA encountered an error while processing an MIPC event notification Recommended Action Try restarting QoS EA and/or HFR Platform Manager process Error Message %QOS-QOS-6-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q to [dec]. Dropping packet. Error: [chars] Explanation Could not set the outgoing queue associated with this packet. As a consequence the packet is being dropped. During normal operation of the system, an occasional (very in-frequent) packet drop in the slow-path is tolerable. Recommended Action No action is required. Error Message %QOS-QOS-6-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to initialise debug infra within the qfifo node on the netio chain. Error: [chars] Explanation Debug initialization failed within the qfifo node on the NetIO chain. Debugs may not be printed. Recommended Action Try restarting netio process Error Message %QOS-QOS-7-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars] Explanation Connection to IMP server failed during process init. This could be because QoS EA is - Unable to bind to the IMP server, - Unable to map context to connection ID, - Unable to register callback handler, or - Unable to initialise event handler for connect/ disconnect events The above situations would lead to an inability of QoS EA to process CAPS from MA (via IM/IMP infrastructure), and to a potential disconnect between the hardware/software views of the configured qos policies on the system. Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. REDUCE Error Message %QOS-QOS-7-ERR_EVM_CREATE Failed to setup event manager Explanation Failed to setup event manager. Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. REDUCE QOSEA Messages Error Message %QOS-QOSEA-3-BWCHG_ERROR QOSEAERR: update bandwidth for ifh [hex] with [dec] [chars] [chars] [chars] Explanation This is an error message from the QoS EA bandwidth changeProcess, it indicates that something has gone wrong internally in the QoS EA during bandwidth change. Recommended Action File a DDTS Error Message %QOS-QOSEA-3-ERROR QoSEA-Err: [chars] Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in the QoS EA. Recommended Action File a DDTS Error Message %QOS-QOSEA-3-EXIT_ERROR QoSEA-Err: [chars] [chars] Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in the QoS EA. Recommended Action File a DDTS Error Message %QOS-QOSEA-3-IMATTR_ERROR QOSEAERR: im_attr_get bandwidth [chars] [hex] Error: [chars] Explanation This is an error message from the QoS EA bandwidth changeProcess, it indicates that something has gone wrong internally in the QoS EA during bandwidth attribute get. Recommended Action File a DDTS Error Message %QOS-QOSEA-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars] Explanation The QoS EA could not create the necessary message channel due to the given error Recommended Action DDTS Error Message %QOS-QOSEA-3-MSG_HANDLER_ERR An error occurred in the [chars] message handler Explanation An error occurred during message handling in the indicated message handler Recommended Action File a DDTS Error Message %QOS-QOSEA-3-POLICY_ERROR QoSEA-Err: class:[chars], [chars] Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong while trying to configure a service policy. Recommended Action NONE Error Message %QOS-QOSEA-3-ROLLBACK_ERROR QoSEA-Rollback-Err: [chars] Explanation This is an error message from the QoS EA Process, it indicates that rollback failed in the QoS EA. Recommended Action Pls analyse the resource availability in the LC. Remove and add the qos policy-map for the interface. Error Message %QOS-QOSEA-3-UNHANDLED_MSG The QoS EA received an unhandled message Explanation The QoS EA received a message that it was unable to handle' Recommended Action DDTS Error Message %QOS-QOSEA-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex] Explanation An incoming message was demuxed to the incorrect message handler Recommended Action File a DDTS Error Message %QOS-QOSEA-4-WARN QoSEA-Warn: [chars] Explanation This is a warning message from the QoS EA Process Recommended Action RECUR Error Message %QOS-QOSEA-5-NOTICE QoSEA-Notice: [chars] Explanation This is a notice message from the QoS EA Process Recommended Action NONE Error Message %QOS-QOSEA-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars] Explanation This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface. Recommended Action NONE Error Message %QOS-QOSEA-6-INFO QoSEA-Info: [chars] Explanation This is an informational message from the QoS EA Process Recommended Action RECUR Error Message %QOS-QOSEA-6-MSG_ASYNC An Asynchronous message was received Explanation The QoS EA received an asynchronous message. Recommended Action NONE Error Message %QOS-QOSEA-6-POLICY_INFO QoSEA-Info: class:[chars], [chars] Explanation This is an informational message from the QoS EA Process. It indicates that something can not be configure in service policy. Recommended Action NONE Error Message %QOS-QOSEA-7-DEBUG QoSEA-Debug: [chars] Explanation This is a debuging message from the QoS EA Process Recommended Action NONE QOSRM_DLL Messages Error Message %QOS-QOSRM_DLL-3-ERROR QoSRM-DLL-Err: [chars] Explanation This is an error message from the QoS RM DLL, it indicates that something has gone wrong internally in the QoS RM dll. Recommended Action File a DDTS Error Message %QOS-QOSRM_DLL-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars] Explanation The QoS RM dll could not create the necessary message channel due to the given error Recommended Action DDTS Error Message %QOS-QOSRM_DLL-3-MSG_HANDLER_ERR An error ([chars]) occurred in the [chars] message handler,Msg:[hex] Explanation An error occurred during message handling in the indicated message handler Recommended Action File a DDTS Error Message %QOS-QOSRM_DLL-3-UNHANDLED_MSG The QoS RM dll received an unhandled message Explanation The QoS RM dll received a message that it was unable to handle' Recommended Action DDTS Error Message %QOS-QOSRM_DLL-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex] Explanation An incoming message was demuxed to the incorrect message handler Recommended Action File a DDTS Error Message %QOS-QOSRM_DLL-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex] Explanation The QoS RM dll received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect. Recommended Action File a DDTS Error Message %QOS-QOSRM_DLL-4-WARN QoSRM-DLL-Warn: [chars] Explanation This is a warning message from the QoS RM DLL Recommended Action RECUR Error Message %QOS-QOSRM_DLL-6-INFO QoSRM-DLL-Info: [chars] Explanation This is an informational message from the QoS RM DLL Recommended Action RECUR Error Message %QOS-QOSRM_DLL-6-MSG_ASYNC An Asynchronous message was received Explanation The QoS RM dll received an asynchronous message. Recommended Action NONE Error Message %QOS-QOSRM_DLL-7-DEBUG QoSRM-DLL-Debug: [chars] Explanation This is a debuging message from the QoS RM DLL Recommended Action NONE QOSRM Messages Error Message %QOS-QOSRM-3-ERROR QoSRM-Err: [chars] Explanation This is an error message from the QoS RM Process, it indicates that something has gone wrong internally in the QoS RM. Recommended Action File a DDTS Error Message %QOS-QOSRM-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars] Explanation The QoS RM could not create the necessary message channel due to the given error Recommended Action DDTS Error Message %QOS-QOSRM-3-MSG_HANDLER_ERR Event: [chars] occurred in the [chars] message handler, Msg:[hex] Explanation An error occurred during message handling in the indicated message handler Recommended Action File a DDTS Error Message %QOS-QOSRM-3-UNHANDLED_MSG The QoS RM received an unhandled message Explanation The QoS RM received a message that it was unable to handle' Recommended Action DDTS Error Message %QOS-QOSRM-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex] Explanation An incoming message was demuxed to the incorrect message handler Recommended Action File a DDTS Error Message %QOS-QOSRM-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex] Explanation The QoS RM received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect. Recommended Action File a DDTS Error Message %QOS-QOSRM-4-WARN QoSRM-Warn: [chars] Explanation This is a warning message from the QoS RM Process Recommended Action RECUR Error Message %QOS-QOSRM-6-INFO QoSRM-Info: [chars] Explanation This is an informational message from the QoS RM Process Recommended Action RECUR Error Message %QOS-QOSRM-6-MSG_ASYNC An Asynchronous message was received Explanation The QoS RM received an asynchronous message. Recommended Action NONE Error Message %QOS-QOSRM-7-DEBUG QoSRM-Debug: [chars] Explanation This is a debuging message from the QoS RM Process Recommended Action NONE
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks