-
Cisco IOS XR System Error Message Reference Guide, Release 3.2
-
Preface
-
Cisco IOS XR System Error Messages Overview
-
Access Control List (ACL) Error Messages for Cisco IOS XR
-
Fabric (FABRIC) Error Messages for Cisco IOS XR
-
Hardware Accessibility (HA) Messages for Cisco IOS XR
-
Installation (INSTALL) Messages for Cisco IOS XR
-
Internet Protocol (IP) Messages for Cisco IOS XR
-
Layer 2 (L2) Messages for Cisco IOS XR
-
Media (MEDIA) Messages on Cisco IOS XR
-
Manageability (MGBL) Messages for Cisco IOS XR
-
Operating System (OS) Messages for Cisco IOS XR
-
Packet Infrastructure (PKT_INFRA) Messages for Cisco IOS XR
-
Platform (PLATFORM) Messages for Cisco IOS XR
-
Quality of Service (QOS) Messages for Cisco IOS XR
-
Routing (ROUTING) Messages for Cisco IOS XR
-
Security (SECURITY) Messages for Cisco IOS XR
-
Simple Network Management Protocol (SNMP) Messages for Cisco IOS XR
-
System Database (SYSDB) Messages for Cisco IOS XR
-
Feedback
Table Of Contents
System Database Messages
This section contains all system database related System Error Messages. The following facility codes are represented in this module:
BACKEND Messages
Error Message%SYSDB-BACKEND-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The backend library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-BACKEND-3-INTERNAL_PATH [chars] for pathname [chars]: rc [hex] ([chars])
Explanation The backend library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-BACKEND-3-INVALIDARG Invalid arguments to [chars]
Explanation Invalid arguments were supplied to a backend function
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-BACKEND-3-INVALIDARG_PATH Invalid arguments to [chars] for path [chars]
Explanation Invalid arguments were supplied to a backend function
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-BACKEND-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The backend library has failed to aquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-BACKEND-3-MISMATCH A [chars] argument was not in a valid format. The value passed was '[chars]'; backend converted this to '[chars]'
Explanation The backend library has detected a mismatch between the actual and parsed values of a node.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
BACKUPDB Messages
Error Message%SYSDB-BACKUPDB-3-INTERNAL [chars]: rc [hex]
Explanation The client library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-BACKUPDB-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The client library has failed to aquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
LIBSYSDB Messages
Error Message%SYSDB-LIBSYSDB-3-CERRNO_REG Failed to register block [dec] errors - cerr_register returned [chars]
Explanation The client library has failed to register SysDB's error code (cerrno) definitions.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-3-EDM_BIND SysDB client library received an EDM 'BIND' message not intended for it. Most probable cause of this error is that some other EDM has registered with the same LWM channel name as this EDM.
Explanation The SysDB client library was unable to complete an EDM 'BIND' request as the EDM registration information sent with the message was invalid for the EDM.
Recommended Action Ensure the LWM channel name used by this client is not being used by any other EDM. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The client library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-3-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])
Explanation The client library has either failed to aquire or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The client library has failed to aquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-3-MULT_DEFAULTIFIERS An attempt was made to register a multiple verifier with a default function on path '[chars]' which already has a default provider.
Explanation Another process has already registered a default provider function on this path. It is not possible to have multiple default providers.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-3-RECONNECTION Failed to reconnect to SysDB server and re-register: rc [hex] ([chars])
Explanation The client library has failed to reconnect to the SysDB server.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-4-APPLY [unsigned int] out of [unsigned int] apply callbacks failed (first error: [chars]), system may now be in an inconsistent state.
Explanation An apply function failed, so the system may now be in an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-LIBSYSDB-4-RESTORE Failed to restore items after EDM registration on [chars], system may now be in an inconsistent state.
Explanation If an EDM registers or reregisters on a path on which items already exist (and SYSDB_REGISTRATION_OPTION_SCAN has been specified), then those items have been deleted but not all restored after the EDM registration, so the system may now be in an inconsistent state.
Recommended Action *RECUR*
Error Message%SYSDB-LIBSYSDB-7-REFERRAL_COUNT Maximum number of bind referrals hit attempting to connect to path [chars].
Explanation An internal library error has caused a connection attempt from a client to SysDB to fail.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SMC Messages
Error Message%SYSDB-SMC-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The server has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMC-3-INTERNAL_STATE [chars]
Explanation The server has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMC-3-INVALID_PATH SysDB path '[chars]' is invalid
Explanation An operation has been attempted on a part of the SysDB namespace that should not be used.
Recommended Action *RECUR*
Error Message%SYSDB-SMC-3-PARSE_FAILED [chars] ('[chars]' from '[chars]')
Explanation A pathname was used for a SysDB operation from which the destination node could not be parsed.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMC-3-TIMEOUT Message #[unsigned int], destined for [chars], timed out having received [unsigned int] of [unsigned int] expected responses: returning [chars] to client [chars]
Explanation A request timed out before SysDB MC received the expected number of replies
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMC-3-TRANS Attempted multi-node access from transaction was prevented (attempted to access multi-cast group [dec])
Explanation A client attempted to use an unsupported distributed transaction.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMC-3-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]
Explanation The server has come across and unexpected value for the specified parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMC-3-WRONG_PLANE An attempt was made to access SysDB path '[chars]'. This resolves to the [chars] plane and cannot be accessed on this card type.
Explanation An application has tried to access a plane of SysDB data that does not exist on this node.
Recommended Action *RECUR*
Error Message%SYSDB-SMC-4-DEPRECATED_PATH SysDB path '[chars]' is deprecated
Explanation An operation has been attempted on a part of the SysDB namespace that should no longer be used.
Recommended Action *RECUR*
Error Message%SYSDB-SMC-6-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]
Explanation There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.
Recommended Action Upgrade all nodes to have the same version of SysDB installed.
SMS Messages
Error Message%SYSDB-SMS-2-FATAL [chars]
Explanation This is a fatal error and the Medusa server will have exited.
Recommended Action Check to make sure the Medusa server has restarted. If not restart the server. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-COPY_PLANE Failed to copy existing state from active to standby servers rc [hex] ([chars])
Explanation A config replication operation failed.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The Medusa server has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])
Explanation The Medusa server has either failed to acquire or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The Medusa server has failed to acquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-REPLICATE Failed to process a replicated [chars] operation on '[chars]': rc [hex] ([chars])
Explanation Either the Medusa server failed to forward the replicated operation to the SysDB server, or the SysDB server returned an error.
Recommended Action *RECUR*
Error Message%SYSDB-SMS-3-REPLY Failed to send reply to client pid [unsigned int] tid [unsigned int] node [chars]: rc [hex] ([chars])
Explanation The Medusa server failed to reply to a client request.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-SEND [chars] to process '[chars]' (jid [dec], node [chars]): rc [hex] ([chars])
Explanation The Medusa server failed to send an asynchronous message to a SysDB client.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-SEND_RESPONSE Sending [chars] via group_sendv_memberset failed [msg_size [unsigned int]]: [hex] ([chars])
Explanation The Medusa server failed to send a message to SysDB MC
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-3-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]
Explanation The Medusa server came across an unexpected value for the specified parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SMS-6-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]
Explanation There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.
Recommended Action Upgrade all nodes to have the same version of SysDB installed.
Error Message%SYSDB-SMS-7-COPY_PLANE_ITEM Failed to process a replicated [chars] operation on '[chars]': rc [hex] ([chars])
Explanation The operation failed during a config replication operation.
Recommended Action *RECUR*
Error Message%SYSDB-SMS-7-MSG_PURGE Purging error messages for failed items
Explanation Messages for failed operation during a config replication operation being purged to prevent the console being spammed.
Recommended Action *NONE*
SYSDB_REPLICATOR Messages
Error Message%SYSDB-SYSDB_REPLICATOR-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The replicator has either had a function fail that it expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB_REPLICATOR-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The replicator has failed to acquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB_REPLICATOR-3-REPLICATE Failed to replicate a [chars] operation on '[chars]': rc [hex] ([chars])
Explanation The replicator has failed to replicate an operation to all the applicable SysDB servers.
Recommended Action *RECUR*
SYSDB Messages
Error Message%SYSDB-SYSDB-2-FATAL [chars]
Explanation This is a fatal error and sysdb will have exited.
Recommended Action Check to make sure sysdb has restarted. If not restart sysdb. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-2-USAGE Incorrect arguments: Usage: [chars] [svr_threads] l = local-plane; s = shared-plane; a = admin-plane Maximum number of threads is [dec].
Explanation Incorrect command line parameters were passed to the sysdb server, and so it failed to start.
Recommended Action Check the startup arguments passed to sysdb. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-BLOCK [chars] : parameter1 [hex] parameter2 [hex] ([chars])
Explanation The SysDB server's memory management module experienced an unexpected error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The server has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])
Explanation The server has either failed to aquire or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-LTRACE_INIT SysDB ltrace init failed. Error initialising [[chars]] trace buffer. Error returned by ltrace initialisation: [chars]
Explanation The ltrace buffer could not be initialised
Recommended Action *RECUR*
Error Message%SYSDB-SYSDB-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The server has failed to acquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-REPLY Failed to send reply to client jid [unsigned int] tid [unsigned int] node [chars]: rc [hex] ([chars])
Explanation The server failed to reply to a client request. A likely reason for this is that the process in question has exited.
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show process location all command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show process location all output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_BIND [Sysdbcon] Could not bind to SysDB: [chars]
Explanation Sysdbcon was unable to bind to the root of SysDB. It is possible that there is a problem with SysDB.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_DATATYPERET [Sysdbcon] SysDB returned unrecognised datatype ([unsigned int])
Explanation The datatype returned by SysDB does not match any of those expected by Sysdbcon. This is probably because the type is missing in Sysdbcon.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_EXTFMTSTR [Sysdbcon] Unable to extract format string from packed tuple
Explanation The packed tuple returned from SysDB is in some way corrupt. The format string it contains could not be read.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_FILEREAD [Sysdbcon] Unable to read from command file
Explanation An error occurred during a read operation from the instruction file.
Recommended Action Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_INTERR [Sysdbcon] An internal error has occurred
Explanation The code has performed an action which should not be possible.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_NOFILE [Sysdbcon] The specified command file ([chars]) could not be opened
Explanation The instruction file specified when Sysdbcon was started cannot be found. The most probable reason is that an incorrect name was supplied.
Recommended Action Check that the file name supplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_PKDREAD [Sysdbcon] Unable to read in data for packed tuple
Explanation An error occurred while preparing to read instructions from the command line.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_PKDTUPLECRE [Sysdbcon] Unable to create packed tuple
Explanation An error occurred creating a packed tuple.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_PKDTUPLEFILE [Sysdbcon] No data for packed tuple in file
Explanation An error occurred during a read operation from the instruction file.
Recommended Action Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_READERINIT [Sysdbcon] Unable to initialize the command line reader
Explanation An error occurred while preparing to read instructions from the command line.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SC_UNPACKTUP [Sysdbcon] Unable to unpack packed tuple
Explanation The packed tuple returned from SysDB is in some way corrupt. The data it contains could not be read.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SEND [chars] to process '[chars]' (jid [dec], node [chars]): errno: [dec] ([chars])
Explanation The SysDB server failed to send an asynchronous message to a SysDB client. A likely reason for this is that the process in question has exited.
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show process location all command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show process location all output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-3-SHUTDOWN Process is shutting down, rc [hex] ([chars])
Explanation A SysDB server process has performed a graceful shutdown and will be restarted.
Recommended Action Check to make sure the process has restarted. If not, restart manually Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-CFG_WRITE [chars] (jid [dec]) wrote to the configuration namespace (item: /[chars]). Illegal modification of configuration is not allowed.
Explanation A non-management client illegally modified part of the system configuration.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-CLIENT_STATS [chars]: name:[chars], jid:[dec] [client [unsigned int] of [unsigned int]]
Explanation SysDB server hasn't enough space to add client statistics for this process.
Recommended Action None.
Error Message%SYSDB-SYSDB-4-INVALID_PATHNAME [chars] attempted an item get on a subtree path ([chars]). Item gets should only be attempted on items, with no trailing '/'
Explanation A process, likely to be a show command, is attempting to access a sysdb item with an incorrect path string.
Recommended Action *DEBUG*
Error Message%SYSDB-SYSDB-4-SC_ABORTBULK [Sysdbcon] While aborting a bulk operation the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_ABORTTRANS [Sysdbcon] While aborting a transaction the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_BAD_INTEGER [Sysdbcon] Warning: bad integer format or integer value is out of range.
Explanation The user entered integer in unrecognized format or out of range of current integer data type.
Recommended Action Correct input value and run command again.
Error Message%SYSDB-SYSDB-4-SC_BADFORMAT [Sysdbcon] Badly formatted command
Explanation An unescaped ''' character was found part way through a token in a command string.
Recommended Action Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_BIND_NOTFOUND [Sysdbcon] Warning: now bound to a non-existent node.
Explanation The user bound to a node which does not exist. This is a warning only - this action is perfectly legal.
Recommended Action Check that this is the directory you intended to bind to.
Error Message%SYSDB-SYSDB-4-SC_BULK_NUM_OPS [Sysdbcon] While getting the number of operations in the bulk the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_CFGMGR_ADD_DELETES [Sysdbcon] While adding deletes to the bulk buffer the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_CFGMGR_ADDDIFFS [Sysdbcon] While adding diffs to the bulk the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_CFGMGR_DELETE [Sysdbcon] While performing a bulk regular expression delete the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_CFGMGR_MERGE [Sysdbcon] While merging files the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_COMMITTRANS [Sysdbcon] While committing a transaction the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_COPY [Sysdbcon] While copying item [chars] to [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the item to copy does not exist. The details are in the error string.
Recommended Action Check that the item to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_CREATE [Sysdbcon] While creating item [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the item to create already exists. The details are in the error string.
Recommended Action Check that the item to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_DATAFIND [Sysdbcon] While executing the find data request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_DATALIST [Sysdbcon] While executing the datalist request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_DATATYPE [Sysdbcon] Unrecognised datatype ([chars])
Explanation A datatype other than one of those supported was supplied.
Recommended Action Use help for a list of supported datatypes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_DELETE [Sysdbcon] While deleting item [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the item does not exist. The details are in the error string.
Recommended Action Check that the item to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_EDM_NOT [Sysdbcon] While generating EDM notifications the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_ENDBULK [Sysdbcon] While ending a bulk operation the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_ERRORSLIST [Sysdbcon] While executing the errors list request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_EVENT [Sysdbcon] Unrecognised notification event ([chars])
Explanation A notification event other than one of those supported was supplied.
Recommended Action Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_EVENTFIND [Sysdbcon] While executing the event find request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_EXCESS [Sysdbcon] Excess tokens in command string
Explanation There were more tokens entered as part of the command string than are required for the command.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_FILERESTORE [Sysdbcon] While restoring items from a file the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_FILESAVE [Sysdbcon] While saving items to a file the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_FIND [Sysdbcon] While executing the find request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_GENERIC_INIT [Sysdbcon] Error initializing bag read
Explanation An error occurred invoking a bag DLL function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_GET [Sysdbcon] While fetching item [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the item to fetch does not exist. The details are in the error string.
Recommended Action Check that the requested item exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_HEADER [Sysdbcon] Error extracting the header information from the bag
Explanation An error occurred invoking a bag DLL function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_ITERATE [Sysdbcon] While executing the iterate request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_LIST [Sysdbcon] While executing the list request the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISMATCH [Sysdbcon] Mismatched quotes in command
Explanation A quoted token was not terminated with a quote character.
Recommended Action Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSDESTNAME [Sysdbcon] Missing destination item name or path.
Explanation The command entered requires a destination item name or path and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSEVENT [Sysdbcon] Missing notification event
Explanation The command entered requires a notification event type and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSFILENAME [Sysdbcon] Missing file name
Explanation The command entered requires an file name and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSNAME [Sysdbcon] Missing item name
Explanation The command entered requires an item name and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSSRCNAME [Sysdbcon] Missing source item name or path.
Explanation The command entered requires a source item name or path and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSTYPE [Sysdbcon] Missing item type
Explanation The command entered requires an item type and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_MISSVALUE [Sysdbcon] Missing item value
Explanation The command entered requires an item value and one was not supplied.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_PATHCREATE [Sysdbcon] Unable to create full path from path supplied
Current dir: [chars]
Path supplied [chars]Explanation When combining the path supplied with the path Sysdbcon is currently bound to an error occurred. This could be because the path created would be invalid.
Recommended Action Check that the combination of paths is valid. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_PKDFMTSTR [Sysdbcon] Format string contains illegal character ([char])
Explanation The packed tuple format string should only contain combinations of '%', 'd', 'ld' and 's'. A character other than one of these was found in the string.
Recommended Action Check that the format string is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_RDLOCK [Sysdbcon] While getting a read lock the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_REBIND [Sysdbcon] While binding to [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the path supplied is invalid. The details are in the error string.
Recommended Action Check that the path is valid. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_REMOVE_BULK_OP [Sysdbcon] While removing operation on [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.
Recommended Action Check that the operation to remove exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_SET [Sysdbcon] While setting item [chars] the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the item does not exist or has the wrong type. The details are in the error string.
Recommended Action Check that the item to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_SETTIMEOUT [Sysdbcon] While setting the timeout time the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_STARTBULK [Sysdbcon] While starting a bulk operation the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_STARTTRANS [Sysdbcon] While starting a transaction the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. This could be because the timeout time was not correctly entered. The details are in the error string.
Recommended Action Check that the format of the timeout time is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_UNKCMD [Sysdbcon] Unrecognised command. Type help or ? for a list of available commands
Explanation The first token in a command string was not a recognised Sysdbcon command.
Recommended Action Check the list of available commands and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_UNLOCK [Sysdbcon] While releasing a lock the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_VERIFY [Sysdbcon] Verification failed on item [chars] for the following reason
[chars]Explanation An error occurred invoking a SysDB function. This could be because the item does not exist or has the wrong type. Or because the verifier did not allow the change. The details are in the error string.
Recommended Action Check that the item to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_VRFNRES [Sysdbcon] While resuming verification the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_VRFNSUSP [Sysdbcon] While suspending verification the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-SC_WRLOCK [Sysdbcon] While getting a write lock the following error occurred:
[chars]Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-TIMEOUT [chars] request for '[chars]' from '[chars]' (jid [dec]). No response from '[chars]' (jid [dec]) within the timeout period ([unsigned int] seconds)
Explanation A timeout occured whilst processing a request.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-TIMEOUT_APPLY Apply callback for '[chars]' from '[chars]' (jid [dec]). No response from '[chars]' (jid [dec]) within the timeout period ([unsigned int] seconds), system may now be in an inconsistent state
Explanation An apply callback timed out, so the system may now be in an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-TIMEOUT_APPLY_BATCH Apply callback of [unsigned int] events from '[chars]' (jid [dec]). No response from '[chars]' (jid [dec]) within the timeout period ([unsigned int] seconds), system may now be in an inconsistent state.
Explanation An apply callback timed out, so the system may now be in an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-TIMEOUT_NFN Process '[chars]' (jid [dec]) failed to pick up notification event within the timeout period ([unsigned int] seconds)
Explanation A notification event sent by the SysDB server timed out.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-4-TIMEOUT_VRFN_BATCH Batched verification request of [unsigned int] events from '[chars]' (jid [dec]). No response from '[chars]' (jid [dec]) within the timeout period ([unsigned int] seconds)
Explanation A verification event sent by the SysDB server timed out.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-6-INFO [chars]: rc [hex] ([chars])
Explanation The server detected an error with one of its clients.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDB-6-STARTUP Startup request for '[chars]' from '[chars]' (jid [dec]) failed for a process on a slow starting node
Explanation A startup request failed during the second round of callbacks.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SYSDBHELPER Messages
Error Message%SYSDB-SYSDBHELPER-3-INTERNAL [chars]: rc [hex]
Explanation The client library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDBHELPER-3-LOCKING Failed to [chars] [chars]. Error [dec]
Explanation The client library has either failed to aquire or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDBHELPER-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The client library has failed to aquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SYSDBUTILS Messages
Error Message%SYSDB-SYSDBUTILS-3-INTERNAL [chars]: rc [hex] ([chars])
Explanation The client library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDBUTILS-3-LOCKING Failed to [chars] [chars]. Error [dec]
Explanation The client library has either failed to aquire or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDBUTILS-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The client library has failed to aquire the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDBUTILS-4-INTERNAL_NODEID_STR NodeID to string conversion failed for node id [dec] (rc [hex] - [chars])
Explanation The client library was unable to convert the specified node ID into a node description string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SYSDB-SYSDBUTILS-6-PROTOCOL The process '[chars]' (jid [dec]) attempted to bind using an incompatible version of the SysDB messaging protocol
Explanation There was a mismatch between the messaging protocol version used by the SysDB client and the SysDB server.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
