-
Cisco IOS XR System Error Message Reference Guide, Release 3.2
-
Preface
-
Cisco IOS XR System Error Messages Overview
-
Access Control List (ACL) Error Messages for Cisco IOS XR
-
Fabric (FABRIC) Error Messages for Cisco IOS XR
-
Hardware Accessibility (HA) Messages for Cisco IOS XR
-
Installation (INSTALL) Messages for Cisco IOS XR
-
Internet Protocol (IP) Messages for Cisco IOS XR
-
Layer 2 (L2) Messages for Cisco IOS XR
-
Media (MEDIA) Messages on Cisco IOS XR
-
Manageability (MGBL) Messages for Cisco IOS XR
-
Operating System (OS) Messages for Cisco IOS XR
-
Packet Infrastructure (PKT_INFRA) Messages for Cisco IOS XR
-
Platform (PLATFORM) Messages for Cisco IOS XR
-
Quality of Service (QOS) Messages for Cisco IOS XR
-
Routing (ROUTING) Messages for Cisco IOS XR
-
Security (SECURITY) Messages for Cisco IOS XR
-
Simple Network Management Protocol (SNMP) Messages for Cisco IOS XR
-
System Database (SYSDB) Messages for Cisco IOS XR
-
Feedback
Table Of Contents
Security Messages
This section contains all Security related System Error Messages, sucyh as AAA, IPSec and related protocols, and so forth. The following facility codes are represented in this module:
aaa_task Messages
Error Message%SECURITY-aaa_task-3-CERRNO_ERROR [chars]: [chars] failed - [dec]: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-3-GENERIC_ERROR [chars]: [chars]
Explanation Error message from aaa task debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-3-INVALID_AAA_TASK_DEBUG_FLAG [chars]: The aaa task debug flag [dec] does not exist.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-3-NO_MEMORY Not enough memory
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
AAA Messages
Error Message%SECURITY-AAA-3-admin_login [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-AVPAIR_MSG_ERR [chars]: avpair message error [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-CERRNO_ERROR [chars]: failed - [dec]: [chars]
Explanation Error message from aaa_debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-CERRNO_ERROR [chars]: failed - [dec]: [chars]
Explanation Error message from aaa_debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DES_INIT_FAIL [chars]: des initialization failed
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERR_ECM [chars]: failed at function [chars] with error [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERR_GET_SLOT_FOR_PATH [chars]: Failed to get the slot number.
Explanation An internal software error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERR_SERVER_GROUP [chars]: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERR_SYSDB_DATA [chars]: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERROR_NO_MEM Not enough memory available while [chars].
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERROR_NO_MEM Not enough memory available while [chars].
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-GENERIC_ERROR [chars]: [chars]
Explanation Error message from aaa_debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-GENERIC_ERROR [chars]: [chars]
Explanation Error message from aaa_debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-SYSDB_FAIL failure at sysdb call [chars] with result: [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-SYSDB_FAIL failure at sysdb call [chars] with result: [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-WHITESPACE_TRUNCATED_IN_SERVER_KEY WARNING: The server key contained trailing whitespace and was truncated
Explanation Whitespace is not allowed at the end of a server key.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-6-CONSOLE_AUTHFREE Console authorization turned off !!!
Explanation Info message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-7-ERR_ECM [chars]: failed at function [chars] with error [chars]
Explanation The initial connection failed, but retry is successfully rescheduled.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-7-ERR_SYSDB [chars]: failure at sysdb call [chars] with result: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
CE Messages
Error Message%SECURITY-CE-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_INVALID_DEVICE Invalid device name '[chars]'
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have CEPKI index entry
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_NO_MEMORY Out of memory
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_RD_FILE Failed reading file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_REG_MSGNO Could not register CEPKI_MSGNO message handler for message id [dec]: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_SPM SPM is not available, CEPKI cannot access its secure files
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-3-ERR_WR_FILE Failed writing file : [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-6-ERR_1_PARAM [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-6-ERR_2_PARAM [chars], [chars]
Explanation CEPKI general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-6-WARNING [chars]
Explanation CEPKI general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CE-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
CEPKI Messages
Error Message%SECURITY-CEPKI-6-ERR [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-ERR_2 [chars] [chars]
Explanation CEPKI general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-INFO [chars]
Explanation CEPKI general info message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-WARNING [chars]
Explanation CEPKI general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-WARNING_2 [chars] [chars]
Explanation CEPKI general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
IKE Messages
Error Message%SECURITY-IKE-3-ADD_KEY_FAIL IKE detects failure adding key, name [chars], ip address [unsigned int]
Explanation IKE found failure when adding key
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-AUTH_FAIL IKE detects failure during authentication [dec], [unsigned int]
Explanation IKE found failure during authentication
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BAD_CERT_USE IKE detects bad certificate was used, [chars], [chars]
Explanation IKE found bad certificate was used
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BAD_DOI_NOTIFY IKE detects bad DOI notify, DOI is [dec], address is [unsigned int]
Explanation IKE found bad DOI notify
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BADDOI_SA IKE detects DOI sa is bad, [unsigned int], [unsigned int]
Explanation IKE found the DOI sa is bad
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BADMAGIC Bad [chars] magic number ([hex]).
Explanation 'An internal software error.'
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-CRYPT_FAILURE IKE detects en/de-crypto services failure, [unsigned int], [chars]
Explanation IKE found failure returned from en/de-crypto services
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_2_PARAM [chars], [chars]
Explanation IKE general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_NO_MEMORY Out of memory
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_RD_FILE Failed reading file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_REG_MSGNO Could not register IKE_MSGNO message handler for message id [dec]: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_WR_FILE Failed writing file : [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERROR [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-FILE_ATTACH_ERR Event file attach failed when attaching msgq descriptor
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IKE-3-IKEINIT [chars]
Explanation An IKE initialization error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-INVAL_CERT IKE detects invalid certificate [chars], [chars]
Explanation IKE found invalid certificate
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-MQ_FAIL [chars]:Failed on [chars]:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IKE-3-NO_ID_CERT_ADDR_MATCH IKE detects no ID certificate address match [unsigned int], [dec], [unsigned int]
Explanation IKE found no ID certificate address match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-NO_ID_CERT_DN_MATCH IKE detects no ID certificate DN match [chars], [dec], [chars]
Explanation IKE found no ID certificate DN match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-NO_ID_CERT_FQDN_MATCH IKE detects no ID certificate FQDN match [chars], [dec], [chars]
Explanation IKE found no ID certificate FQDN match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-NO_ID_CERT_USER_FQDN_MATCH IKE detects no ID certificate user FQDN match [chars], [dec], [chars]
Explanation IKE found no ID certificate user FQDN match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-QUERY_KEY IKE detects failure when querying key
Explanation IKE found failure when querying key
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-SA_NOT_AUTH IKE detects the sa is not authenticated [chars]
Explanation IKE found the sa has not been authenticated
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-SA_NOT_OFFERED IKE detects SA not being offered [unsigned int], [chars]
Explanation IKE found SA not offered
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-4-BAD_MESSAGE IKE message from [chars] failed its sanity check or is malformed
Explanation A quick sanity check is done on all received ISAKMP messages to verify that all component payload types are valid, and that the sum of their individual lengths equals the total length of the received message. This message failed the sanity check. Persistantly bad messages could be a denial of service attack or bad decryption.
Recommended Action 'Contact the remote peer's administrator.'
Error Message%SECURITY-IKE-4-NO_SA IKE message from [chars] has no SA and is not an initialization offer
Explanation IKE maintains state for a communication in the form of security associations. No security association exists for this packet and it is not an initial offer from the peer to establish one. This situation could denote a denial of service attack.
Recommended Action 'Contact the remote peer and/or his administrator'
Error Message%SECURITY-IKE-4-WARNING [chars]
Explanation Internal Warning.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-4-WARNING2 [chars], [chars]
Explanation Internal Warning.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-4-WARNING3 [chars], [chars], [chars]
Explanation Internal Warning.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-6-BAD_DOI_SA DOI value [dec] from SA offer from [chars] is invalid
Explanation The DOI field of an SA offer defines how to parse the fields SAs with an unknown DOI cannot be parsed
Recommended Action 'If this situation persists contact the remote peer's administrator'
Error Message%SECURITY-IKE-6-MODE_FAILURE Processing of [chars] mode failed with peer at [chars]
Explanation Negotiation with the remote peer failed.
Recommended Action 'If this situation persists contact the remote peer'
Error Message%SECURITY-IKE-6-NOT_ENCRYPTED IKE packet from [chars] was not encrypted and it should've been.
Explanation A portion of the IKE exchange takes place in the clear and a portion is encrypted. This message should have been encrypted but was not.
Recommended Action 'Contact remote peer'
Error Message%SECURITY-IKE-6-UNK_EXCHANGE IKE peer at [chars] sent a message with unknown exchange [dec]
Explanation IKE preforms actions on messages based on defined exchanges. The message received had an unknown exchange.
Recommended Action 'Contact the remote peer's administrator'
IMP Messages
Error Message%SECURITY-IMP-3-FATAL_ERR [chars]
Explanation An internal software fatal error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IMP-3-FILE_ATTACH_ERR Event file attach failed when attaching msgq descriptor
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IMP-3-MQ_FAIL [chars]:Failed on [chars]:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IMP-4-MSG_WARN Receive invalid message type [dec]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
IPP Messages
Error Message%SECURITY-IPP-3-ERR_GENERAL [chars] [chars]
Explanation Error description, error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IPP-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error. System is out of memory - malloc failed.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IPP-6-INFO_GENERAL [chars]
Explanation The IPSec IPP encountered some problem in genric nature or plain information.
Recommended Action 'No action is required.'
LOCALD Messages
Error Message%SECURITY-LOCALD-3-AMBIGUOUS_PASSWD Ambiguous Password
Explanation Single digit passwords are not allowed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-AVPAIR_ERROR [chars]:Failed to [chars] attr [dec] - [chars]
Explanation Error in processing an AV pair
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-BAG_ENCODE_ERR [chars]: bag_encode failed with error: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-BAGS_UNREG_ERR [chars]: bag_unregister failed with error [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-CONFIG_ERR Configuration operation failed while [chars] - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_INTERNAL Internal error: [chars] ([chars])
Explanation An internal error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_INVALID_ARG [chars] was called with invalid input argument
Explanation An internal software error has occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_INVALID_GROUP [chars]: [chars]
Explanation AAA failed to recognize the specified server group name. It may be undefined.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_INVALID_IPADDR [chars]: Trying to set invalid ipaddr(0.0.0.0) with user [chars]
Explanation An internal software error has occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_NO_REPLYINFO [chars]:Failed to find reply info attr [dec]
Explanation No reply information (LWM channel) present
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_PROC_READY [chars] Cannot notify sysmgr that locald is ready [dec] [chars]
Explanation Error while communicating with system manager.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ERR_UNSUPPORTED_GROUP Group [chars] is not valid for [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-GENERIC_ERROR [chars]: [chars]
Explanation Generic error message used for internal debugging
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-INTERNAL [chars]. Error: [chars]
Explanation The client library has reached an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-INTERNAL_NULL A NULL pointer was passed by the locald client library to itself
Explanation The client library has passed itself a NULL pointer.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-list_undefined Method list [chars] is not defined. Config rejected.
Explanation Trying to configure a method list in the line configuration that is not defined in AAA
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-LOCAL_PRESENT [chars]
Explanation local method is present in the methodlist.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-LOCKING Failed to [chars] [chars]. Error: [chars]
Explanation The client library has either failed to obtain or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-LWA_ADD_DIR_FAIL Failed to add the username [chars] to lightweight authentication password database - [chars]. (Please remove/rename the file '/disk0:/AAA', which is in conflict with the directory '/disk0:/aaa/'.)
Explanation A file with the same name as aaa directory detected.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-LWA_ADD_FAIL Failed to add the username [chars] to lightweight authentication password database - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-LWA_REM_FAIL Failed to remove the username [chars] from lightweight authentication password database - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The client library has failed to allocate the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-MQ_RECEIVE_FAIL_ERR [chars]:Failed on mq_receive:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-MSG_REPLY_FAIL [chars]: failed to reply to msg from -- [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-MSG_SIZE_ERR [chars]: Size ([dec]) - [chars]
Explanation An internal error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-NOSUCH_TASKGROUP The taskgroup '[chars]' is not configured
Explanation Error while looking up a taskgroup
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-NOSUCH_USERGROUP The usergroup '[chars]' is not configured
Explanation Error while looking up a usergroup
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-PARAMETER [chars]
Explanation The client library was passed an invalid parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-PARAMETER_NULL A NULL parameter was passed by the caller of locald
Explanation The client library was passed a NULL pointer.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-PARAMETER_OPTION An unsupported combination of options were passed by the caller of locald
Explanation The client library was passed an unsupported option parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-PARAMETER_STRING A string parameter passed by the caller of locald is too long
Explanation The client library was passed a string which is too long.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-PASSWD_ALREADY_EXISTS Warning: The password too configured for [chars]
Explanation An internal software error has occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-PLANE_MISMATCH The username '[chars]' is already configured in the other plane (Admin/LR), please choose a different one
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-RED_STATE_ERROR Error on changing redundancy state to [chars] - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-REPLY_ERROR Failed to send reply - - [chars] ([chars])
Explanation Error in sending the reply
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-RESOURCE_CERRNO [chars]. Error: [chars]
Explanation The client library failed to use a resource of one of its (cerrno-returning) libraries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-RESOURCE_ERRNO [chars]. Error: [chars]
Explanation The client library failed to use a resource of one of its (errno-setting) libraries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-ROOT_USERDB_INIT_FAIL [chars]: [chars]
Explanation Locald failed to create/remove the root user database on the disk. This will affect authentication to ksh since it refers to this database.
Recommended Action As a workaround an admin could create this directory in disk0 himself. This should get around the problem.
Error Message%SECURITY-LOCALD-3-SECRET_ALREADY_EXISTS Warning: The secret too is configured for [chars]
Explanation An internal software error has occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-SETPRIO_FAILED Changing locald priority failed [dec]
Explanation Changing locald priority failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-STBY_INIT_ERR Failed to initialize standby - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-3-SYS_ACCT_ERR Failed to send START system accounting record - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-4-ACCT_FAILURE Failed to send the accounting record - [chars]
Explanation Failed to send an accounting record to RADIUS or TACACS+ server
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-4-CHKPT_FAILURE Error encountered while saving to or recovering from checkpoint - [chars]
Explanation Encountered a checkpoint save/recovery failure
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-4-EDM_INIT_ERR Failed to register EDM - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-4-SYSDB_INIT_FAILURE Failed to initialize configuration - [chars]
Explanation Failed to initialize SysDB connection and verifications
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-4-SYSDB_ITEM [chars] '[chars]'. Error: [chars]
Explanation The client library failed to carry out the desired request on a SysDB item or directory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-4-WARN_LAST_OWNER_USER WARNING: This removes the last available owner user in the local database, MIGHT MAKE THE ROUTER INACCESSIBLE FOR ADMIN TASKS. Configuring another local admin user is strongly recommended, before exiting this session
Explanation Removal of last available owner user in the local database
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-6-ERR_EVENT_MANAGER [chars] Event Manager Create Failure [dec] [chars]
Explanation Creation of Event Manager failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-6-ERR_NO_HANDLER [chars] Cannot install handler [dec] [chars]
Explanation Error while installing a handler for incoming messages.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-6-ERR_NO_LINENAME [chars] Cannot get valid line name or interface handle from msg
Explanation Cannot find a valid line name or interface handler while doing authorization
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-6-ERR_NO_METHOD [chars] Cannot get valid authorization method from msg
Explanation Cannot find a valid method while doing authorization
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-6-RED_STATE_CHANGE locald changed state to [chars]
Explanation Redundancy state change notification.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-7-ERR_EVENT_WAIT [chars] Unexpected return from event_wait ignored [dec] [chars]
Explanation Event Mangager waiting on an event, returned an unexpected value.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-7-ERR_SYSDB_FD [chars]: [chars]
Explanation Error while using the System Database.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-LOCALD-7-ERR_TTYMGMT_FD [chars]: [chars] - [chars]
Explanation Error in TTY management library.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
login Messages
Error Message%SECURITY-login-2-AUTHEN_FAILED Failed authentication attempt by user '[chars]' from '[chars]'
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-AAA_INITIALIZE_FAIL [chars]: aaa_initialize failed with blocking is [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-BAD_AUTHEN_RETRY [chars]: Invalid authentication retry number [dec] passed in. Reset to default.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-CERRNO_ERROR [chars]: [chars] failed - [dec]: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-GENERIC_ERROR [chars]: [chars]
Explanation Error message from login_debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-ILLEGAL_STATUS Illegal Status value [dec] received at line [dec] of [chars]().
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-INIT_MSG_FAIL [chars]: aaa_init_msg returned NULL.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-INVALID_LOGIN_DEBUG_FLAG [chars]: The login debug flag [dec] does not exist.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-LISTNAME_NULL [chars]: Invalid listname NULL.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-NO_MEMORY Not enough memory was available while [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-STORE_AUTHEN_USER_ERR Failed to store the authenticated username [chars] in database
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-SYSDB_BIND_FAILED [chars]: sysdb_bind failed. [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-SYSDB_ITEM_GET_FAILED [chars]: sysdb_item_get failed. [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-TTY_OPEN_FAIL [chars]: failed to open tty error [dec] [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-TTYNAME_FAIL [chars]: Failed to obtain tty name
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
PKI Messages
Error Message%SECURITY-PKI-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_INVALID_DEVICE Invalid device name '[chars]'
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have CEPKI index entry
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_NO_MEMORY Out of memory
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_RD_FILE Failed reading file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_REG_MSGNO Could not register CEPKI_MSGNO message handler for message id [dec]: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_SPM SPM is not available, CEPKI cannot access its secure files
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-3-ERR_WR_FILE Failed writing file : [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-ERR_1_PARAM [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-ERR_2_PARAM [chars] [chars]
Explanation CEPKI general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-LOG_INFO [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-LOG_INFO_2 [chars] [chars]
Explanation CEPKI general log message with 2 prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-WARNING [chars]
Explanation CEPKI general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
RADIUSD Messages
Error Message%SECURITY-RADIUSD-3-ACCT_NOTIFY_FAIL Failed to notify the completion of accounting to sender - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR [chars]: NAS IP address omitted
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR [chars]: NAS IP address omitted
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ADD_VSA_FAIL [chars]: failed to add VSA av-pair [dec] with [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ADD_VSA_FAIL [chars]: failed to add VSA av-pair [dec] with [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_AUTHOR_TYPE [chars]: author type [chars] not supported.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_AUTHOR_TYPE [chars]: author type [chars] not supported.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_AVPAIR bad aaa av-pair [dec] with length [dec] detected.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_AVPAIR bad aaa av-pair [dec] with length [dec] detected.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_MSG_TYPE [chars]: Un-supported AAA msg type [dec]
Explanation Found an un-supported AAA msg type in avlist.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_MSG_TYPE [chars]: Un-supported AAA msg type [dec]
Explanation Found an un-supported AAA msg type in avlist.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_SESSION [chars]: request [chars] has inconsistent server addr: [chars] in req, [chars] in session
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_FORMAT_BIT no format bit is set for VSA [chars] according to table bitmap.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_FORMAT_BIT no format bit is set for VSA [chars] according to table bitmap.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_LENGTH [chars]: VSA [dec] has inconsistent length.
Explanation VSA format error found in radiusd while translating.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_LENGTH [chars]: VSA [dec] has inconsistent length.
Explanation VSA format error found in radiusd while translating.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_TYPE [chars]: found bad VSA type [dec] with vendor_id [dec], possibily out-ranged.
Explanation VSA format error found in radiusd while translating.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_TYPE [chars]: found bad VSA type [dec] with vendor_id [dec], possibily out-ranged.
Explanation VSA format error found in radiusd while translating.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_VENDOR no vendor is supported for VSA [chars] according to table bitmap.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_VENDOR no vendor is supported for VSA [chars] according to table bitmap.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAG_ENCODE_ERR [chars]: bag_encode failed with error: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAGS_REG_ERR [chars]: bags_register_all_show_radius_bags failed with error [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAGS_UNREG_ERR [chars]: bag_unregister failed with error [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-CONFIG_ERR Encountered configuration error while [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-DECRYPT_NO_MEM_ERR [chars]: failed to allocate memory while decrypting the password
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-DECRYPT_NO_MEM_ERR [chars]: failed to allocate memory while decrypting the password
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EDM_INIT_ERR Failed to register EDM - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_ATTACH_SOCK [chars]: Unable to attach a handler for socket read/write notification
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_CREATE_SERVER_ENTRY [chars]: Could not create a server entry
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_CREATESG [chars]: Unable to add the created servergroup in radiusd
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_ECM [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_INVALID_ARG [chars] was called with invalid input argument
Explanation An internal software error has occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SET_SERVER_ENTRY [chars]: Error while setting or unsetting a parameter in server entry
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBBIND [chars]: Cannot bind to SysDB
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBBIND [chars]: Cannot bind to SysDB
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBFAIL [chars]: Failed to allocate SysDB event
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBFAIL [chars]: Failed to allocate SysDB event
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBNOTIFY [chars]: Cannot register for notification with SysDB
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBNOTIFY [chars]: Cannot register for notification with SysDB
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBVERIFY [chars]: Cannot register for verification with SysDB
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBVERIFY [chars]: Cannot register for verification with SysDB
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_TTY_IFH_PRESENT [chars]: Both ttyname ([chars]) and ifh ([hex]) are present in the message
Explanation In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_TTY_IFH_PRESENT [chars]: Both ttyname ([chars]) and ifh ([hex]) are present in the message
Explanation In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Event_async_attach failed
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Event_async_attach failed
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EVENT_FILE_ATTACH_ERR Event file attach failed when attaching RADIUSD msgq descriptor
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EVENT_FILE_ATTACH_ERR Event file attach failed when attaching RADIUSD msgq descriptor
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EVENT_MANAGER_CREATE_FAIL_ERR Event_manager_create failed with error [dec]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-INTERNAL [chars]. Error: [chars]
Explanation The client library has reached an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-INTERNAL_NULL A NULL pointer was passed by the radiusd client library to itself
Explanation The client library has passed itself a NULL pointer.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-INVALID_ARGS_ERR [chars]: Invalid argument for sysdb_edm get
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-IP_ADDR_TOO_LONG_ERR [chars]: ipaddrtype [chars] too long ([dec])
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-IP_ADDR_TOO_LONG_ERR [chars]: ipaddrtype [chars] too long ([dec])
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-LOCKING Failed to obtain or release [chars] lock (error: [chars])
Explanation The client library has either failed to obtain or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation The client library has failed to allocate the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MQ_RECEIVE_FAIL_ERR [chars]:Failed on mq_receive:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MQ_RECEIVE_FAIL_ERR [chars]:Failed on mq_receive:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MSG_REPLY_FAIL [chars]: failed to reply to msg from -- [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MSG_SIZE_ERR [chars]: Size ([dec]) - [chars]
Explanation An internal error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NO_MEM_ERR [chars]: failed to allocate memory
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NO_MEM_ERR [chars]: failed to allocate memory
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NO_USERNAME_ERR [chars]: No or empty username found in msg, request ignored.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NO_USERNAME_ERR [chars]: No or empty username found in msg, request ignored.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NOT_VSA trying to call [chars] to handle a non-VSA radius attribute [dec].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NOT_VSA trying to call [chars] to handle a non-VSA radius attribute [dec].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-PARAMETER [chars]
Explanation The client library was passed an invalid parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-PARAMETER_NULL A NULL parameter was passed by the caller of radiusd
Explanation The client library was passed a NULL pointer.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-PARAMETER_OPTION An unsupported combination of options were passed by the caller of radiusd
Explanation The client library was passed an unsupported option parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-PARAMETER_STRING A string parameter passed by the caller of radiusd is too long
Explanation The client library was passed a string which is too long.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-PROBE_THREAD_CREATE_FAILED Unable to create thread to probe status of radius server [chars]/[dec]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RADIUS_NOSERV Warning: Server [chars]:[dec],[dec] is not defined
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RADIUS_UPDATE_PASSWORD_ERR [chars]: radius_update_password failed to allocate memory
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RADIUS_UPDATE_PASSWORD_ERR [chars]: radius_update_password failed to allocate memory
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RESOURCE_CERRNO [chars]. Error: [chars]
Explanation The client library failed to use a resource of one of its (cerrno-returning) libraries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RESOURCE_ERRNO [chars]. Error: [chars]
Explanation The client library failed to use a resource of one of its (errno-setting) libraries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RIB_BIND_ERR [chars]: RIB bind failed
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RIB_BIND_ERR [chars]: RIB bind failed
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RIB_LOCAL_ADDRESS_ERR [chars]: NAS IP not found; address omitted
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RIB_LOCAL_ADDRESS_ERR [chars]: NAS IP not found; address omitted
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SERVER_DOWN RADIUS SERVER [chars]/[dec] is DOWN
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SERVER_MUTEX_INIT_FAILED Mutex Init for RADIUS SERVER FAILED
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SETPRIO_FAILED Changing priority failed [dec]
Explanation Attempt to change priority failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_BIND_FAIL_ERR [chars]: Failed to bind to Sysdb: [chars]. If a Radius source interface is configured, be sure that the interface is not shutdown and re-apply the source interface config.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_BIND_FAIL_ERR [chars]: Failed to bind to Sysdb: [chars]. If a Radius source interface is configured, be sure that the interface is not shutdown and re-apply the source interface config.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_BIND_FOR_EDM_ERR [chars]: Failure connecting to sysdb at point [chars] for EDM
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_DIR_GET_LAST_ERR [chars]: Error in sysdb_directory_get_last
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_DIR_GET_LAST_ERR [chars]: Error in sysdb_directory_get_last
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_ERR_MSG [chars]: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_ERR_MSG [chars]: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_FAIL_ERR [chars]: Failed: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_FAIL_ERR [chars]: Failed: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SYSDB_REGISTER_EDM_ERR [chars]: sysdb_register_edm failed with error [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-TRAILING_WHITESPACE_IN_KEY WARNING: The RADIUS server key '[chars]' contains trailing whitespace.
Explanation This warning is issued in case the user did not intend for there to be trailing whitespace in the server key.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_BITMAP_ERROR inconsistent bits in bitmap [hex], nas-to-daemon table entry [dec].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_BITMAP_ERROR inconsistent bits in bitmap [hex], nas-to-daemon table entry [dec].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR1 daemon VSA [dec] does not match type string in [chars].
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR1 daemon VSA [dec] does not match type string in [chars].
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR2 parsing error on daemon VSA: [chars]. no protocol or type field.
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR2 parsing error on daemon VSA: [chars]. no protocol or type field.
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR3 parsing error on daemon VSA [chars]. No value field or invalid length
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR3 parsing error on daemon VSA [chars]. No value field or invalid length
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR4 parsing error on daemon VSA [chars]. order number [dec] (not 0-254) is not supported.
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR4 parsing error on daemon VSA [chars]. order number [dec] (not 0-254) is not supported.
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR5 parsing error on daemon VSA [chars]. invalid type field.
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR5 parsing error on daemon VSA [chars]. invalid type field.
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_NOTFOUND VSA [dec] not found in daemon-to-nas tables after string comparing. VSA [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_NOTFOUND VSA [dec] not found in daemon-to-nas tables after string comparing. VSA [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_PROTO_MISMATCH daemon VSA has a different protocol ([chars]) than client ([chars]).
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_PROTO_MISMATCH daemon VSA has a different protocol ([chars]) than client ([chars]).
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_TABLE_ERROR table [chars] entry [dec] has inconsistent ignore flag and std_type.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_TABLE_ERROR table [chars] entry [dec] has inconsistent ignore flag and std_type.
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-RADIUS_NOSERV Warning: Server [chars]/[dec]/[dec] is not defined
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-RADIUS_NOSERV_ALT Warning: Server [chars]:[dec],[dec] is not defined
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-SYSDB_ITEM [chars] '[chars]'. Error: [chars]
Explanation The client library failed to carry out the desired request on a SysDB item or directory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-TRAILING_WHITESPACE_IN_KEY WARNING: The RADIUS server key '[chars]' contains trailing whitespace.
Explanation This warning is issued in case the user did not intend for there to be trailing whitespace in the server key.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-WARN_IN_SG Warning: Server [chars]:[dec],[dec] is still referenced by server group.
Explanation A RADIUS server has been removed which is still included in a server group.
Recommended Action The server group which references the removed server should be edited to remove the reference, or the removed server should be added back to the list of RADIUS hosts.
Error Message%SECURITY-RADIUSD-4-WARN_IN_SG Warning: Server [chars]:[dec],[dec] is still referenced by server group.
Explanation A RADIUS server has been removed which is still included in a server group.
Recommended Action The server group which references the removed server should be edited to remove the reference, or the removed server should be added back to the list of RADIUS hosts.
Error Message%SECURITY-RADIUSD-6-BAD_ARG [chars]: found invalid input argument(s).
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ARG [chars]: found invalid input argument(s).
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ATTR_LENGTH [chars]: found attr with bad length [dec], attr ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ATTR_LENGTH [chars]: found attr with bad length [dec], attr ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ATTR_TYPE [chars]: found attr with bad type [dec], attr ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ATTR_TYPE [chars]: found attr with bad type [dec], attr ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_ACCT_ID [chars]: can't convert task id to accounting session id: [chars]
Explanation Task id is probably larger than 2^24 - 1
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_ACCT_ID [chars]: can't convert task id to accounting session id: [chars]
Explanation Task id is probably larger than 2^24 - 1
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_BAD_REPLY_ATTR [chars]: reply attr size=[dec] not equal to sum of parts=[dec]
Explanation The length of the reply attribute does not equal its parts.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_BAD_REPLY_ATTR [chars]: reply attr size=[dec] not equal to sum of parts=[dec]
Explanation The length of the reply attribute does not equal its parts.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_BAD_SESSID_ATTR [chars]: Using incorrect AAA attribute for RAD_ACCT_SESSID_ATTR [chars]
Explanation Check consistancy between radius_table and nas_to_daemon_av_table
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_BAD_SESSID_ATTR [chars]: Using incorrect AAA attribute for RAD_ACCT_SESSID_ATTR [chars]
Explanation Check consistancy between radius_table and nas_to_daemon_av_table
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_LEAFTIMER Cannot allocate leaf timer - [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_LEAFTIMER [chars]: cannot allocate leaf timer
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_MASTERTIMER [chars]: cannot allocate master timer
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_MASTERTIMER [chars]: cannot allocate master timer
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOPIPE [chars]: pipe creation failure
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOPIPE [chars]: pipe creation failure
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOSERVERS [chars]: no radius servers in find_next
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOSOCKET [chars] Could not watch socket fd errno [dec]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOSOCKET [chars] Could not watch socket fd errno [dec]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOSOCKETD [chars] Socket descriptor not allocated
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_NOSOCKETD [chars] Socket descriptor not allocated
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SERVERFAIL [chars]: can't launch mq_server: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SERVERFAIL [chars]: can't launch mq_server: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SOCKET_BIND_FAIL Error in binding socket: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SOCKETFAIL Error in opening socket, Errorno : [dec]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SOCKETFAIL Error in opening socket, Errorno : [dec]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SYSDBINIT [chars] Could not initialise with SysDB
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SYSDBINIT [chars] Could not initialise with SysDB
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-EVENT_CONN_DESTROY_FAILED [chars]: A call to [chars] failed with error code [dec]: '[chars]'.
Explanation An internal software error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-EVENT_CONN_DESTROY_FAILED [chars]: A call to [chars] failed with error code [dec]: '[chars]'.
Explanation An internal software error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-EVENT_CONN_INIT_FAILED Failed to initialize event connection for [chars] (error: [chars])
Explanation An internal software error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-FUNC_USAGE_ERROR [chars]: should not be called for Cisco VSA processing.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-FUNC_USAGE_ERROR [chars]: should not be called for Cisco VSA processing.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-IFMGR_BIND_FAILED [chars]: A call to im_control_server_bind() returned error code [dec]: '[chars]'. A connection to the interface manager could not be made.
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-IFMGR_BIND_FAILED [chars]: A call to im_control_server_bind() returned error code [dec]: '[chars]'. A connection to the interface manager could not be made.
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INTRFC_STATE_QUERY_FAILED [chars]: For interface [chars] im_state_query() returned error code [dec]: '[chars]'. Source interface was not applied.
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INTRFC_STATE_QUERY_FAILED [chars]: For interface [chars] im_state_query() returned error code [dec]: '[chars]'. Source interface was not applied.
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INVALID_AUTHOR_TYPE [chars]: found invalid author type [dec]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INVALID_AUTHOR_TYPE [chars]: found invalid author type [dec]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INVALID_VSA [chars]: found invalid VSA. attr [dec] ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INVALID_VSA [chars]: found invalid VSA. attr [dec] ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-IP_ADDRESS_NOT_FOUND WARNING: There is no ip address configured for [chars]. Using RADIUS default address instead.
Explanation There is not ip address configured for the specified interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-IP_ADDRESS_NOT_FOUND WARNING: There is no ip address configured for [chars]. Using RADIUS default address instead.
Explanation There is not ip address configured for the specified interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-LEN_TOO_LONG [chars] value length exceeds limit[chars].
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-LEN_TOO_LONG [chars] value length exceeds limit[chars].
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-NO_CMD [chars]: cannot get valid cmd from req [chars].
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-NULL_REQ [chars]: found NULL request pointer.
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-SNPRINTF_FAIL [chars]: snprintf failed with rc=[dec]. [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-SNPRINTF_FAIL [chars]: snprintf failed with rc=[dec]. [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-UNSUPPORTED_VENDOR [chars]: found unsupported vendor id [dec]. VSA ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-UNSUPPORTED_VENDOR [chars]: found unsupported vendor id [dec]. VSA ignored.
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SAM Messages
Error Message%SECURITY-SAM-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_INVALID_DEVICE Invalid device name '[chars]'
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have SAM index entry
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_NO_MEMORY Out of memory
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_RD_FILE Failed reading file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_REG_MSGNO Could not register SAM_MSGNO message handler for message id [dec]: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_SYSDB_SET Failed to set item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_WR_FILE Failed writing file : [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-WARN_NVRAM NVRAM is not available, nvram process might have been down.
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-WARN_SPM SPM is not available, [chars].
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-CAUGHT_SIGNAL server terminating..
Explanation SAM server caught a signal, and terminated
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-NO_BK_LOG SAM log backup file is not present, will try to recover the backup log from SysDB
Explanation For some reason, the backup file of SAM log has disappeared.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-SYSDB_INTEGRITY Cannot guarantee the integrity of SAM SysDB name space, SAM internal tables had been discarded, and will try to recover from backup files.
Explanation Found digest mistmatch for SAM's SysDB name space, the SAM portion of SysDB had been deleted. If SAM backup files exists, this should not impact SAM's functionality; otherwise, CA root certificate and CRL will be lost
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-WARN_CA_CERT_EXPIRED SAM detects the CA certificate had expired, but accepted by user
Explanation SAM found the expired CA certificate in table had been accepted by user.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-WARN_CSS_CERT_EXPIRED SAM detects the PIE certificate had expired, but accepted by user
Explanation SAM found the expired CSS certificate in table had been accepted by user.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-ERR_1_PARAM [chars]
Explanation SAM general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-ERR_2_PARAM [chars], [chars]
Explanation SAM general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_CHANGE_NOT_PERSISTENT SAM found no ENA device with sufficient space to backup the modified SAM table, the change will not be persistent until a successful ENA installation on a flash device.
Explanation SAM found there is nowhere to backup the modified SAM table.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_DIGEST_FILE_MISSING Secure digest file is not found, cannot guarantee the integrity of memory installed files.
Explanation SAM found digest file in NVRAM is missing, discard the memory packages.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_DIGEST_FILE_REINIT Secure digest file not present, SAM will re-init the secure digest file
Explanation SAM found digest file missing from NVRAM, re-init the file.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_INIT_LOG_BACKUP_FILE SAM failed to initialize log backup file
Explanation SAM failed to initalize log backup file in NVRAM, log entry not backed up
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_MEM_DIGEST SAM will remove backup files for memory digest tables and users MUST re-install the memory packages.
Explanation SAM found MEM digest compare not successful, discard the memory packages.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARNING [chars]
Explanation SAM general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
sIMP Messages
Error Message%SECURITY-sIMP-3-FATAL_ERR [chars]
Explanation An internal software fatal error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-sIMP-4-ITI_WARN [chars] [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-sIMP-4-MSG_WARN [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SPM Messages
Error Message%SECURITY-SPM-3-ERR_CHAN_CONNECT Message chan connect ([chars]) failed
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_ENTRY_FIND Unable to find a delete entry for : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_INVALID_EVENT SPM server received invalid event : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_MSG_GEN [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_OPEN_SECURE Error in opening secure file : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PTHREAD_CREATE pthread create error : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PTHREAD_INIT pthread attr init error : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PTHREAD_SET pthread set detach state error : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PULSE_CODE Unknown pulse code ([dec]) received
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_REG_HANDLER Could not register async handlers : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_REG_MSG Could not register SPM_MSGNO message handler for message id - [dec] : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_REPLY_FAIL Could not reply to client message : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_TOKEN_MISMATCH Delete file [chars] token mismatch
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
SSHD Messages
Error Message%SECURITY-SSHD-3-ERR_DETAILS [chars] [chars] [chars]
Explanation Error description, client address, error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_ERRNO [chars] [chars]
Explanation Error description, error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_GENERAL [chars]
Explanation SSH encounterd some error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error. System is out of memory - malloc failed.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_BIND Cannot bind to sysdb in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_DATALIST Cannot get datalist in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_DELETE sysdb_item_delete failed for tuple [chars] in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_GET sysdb_item_get failed for tuple [chars] in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_PACK Cannot pack tuple in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_SET sysdb_item_set failed for tuple [chars] in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-6-INFO_GENERAL [chars]
Explanation The sshd encountered some problem in genric nature or plain information.
Recommended Action 'No action is required.'
TACACSD Messages
Error Message%SECURITY-TACACSD-3-BAG_ENCODE_ERR Failed to encode bag information for '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-BAGS_UNREG_ERR Failed to unregister bags - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-EDM_INIT_ERR Failed to register EDM - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_ATTACH_SOCK Unable to attach an event handler for socket [dec] - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CONFIG_GLOBAL Error while setting or unsetting TACACS+ [chars] configuration - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CONFIG_SERVER Error while setting or unsetting [chars] in a server entry - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CREATE_SERVER_ENTRY Cannot create a TACACS+ server entry - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CREATE_SGSERVER Unable to add the server '[chars]' to group '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CREATESG Unable to create the server group '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_DELETE_SGSERVER Unable to delete the server '[chars]' from group '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_DELETESG Unable to delete the server group '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_SYSDBBIND Failed to bind to SysDB for path [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Failed to initialize timer for [chars] - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-GENERIC_ERROR [chars]: [chars]
Explanation Error message from tacacs_debug routine
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-IFMGR_BIND_FAILED Failed to bind to IM while setting source interface as [chars] - [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-MEMORY Failed to allocate [unsigned int] bytes while [chars]
Explanation The client library has failed to allocate the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-MSG_SIZE_ERR [chars]: size [dec] - [chars]
Explanation An internal error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-NO_MEM_ERR [chars]: failed to allocate memory
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-PARAMETER [chars]
Explanation The client library was passed an invalid parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-PROBE_THREAD_CREATE_FAILED Unable to create thread to probe status of TACACS+ server [chars]/[dec]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-RESOURCE_CERRNO [chars] (error: [chars])
Explanation The client library failed to use a resource of one of its (cerrno-returning) libraries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-SETPRIO_FAILED Failed to change server priority - [chars]
Explanation Attempt to change priority failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-IFHANDLE_NULL WARNING: Cannot obtain handle for the interface [chars]: [chars]
Explanation Error encountered while obtaining handle for the interface specified as the source interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-NO_IP_ADDRESS WARNING: No IP address has been configured for [chars]
Explanation There is no IP address configured for the specified interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-NOSUCH_INTF WARNING: Specified source interface [chars] is not present: [chars]
Explanation The interface specified as source interface is not present.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-SRCINTF_NOTUP WARNING: Specified source interface [chars] is not UP
Explanation The interface specified as source interface is not UP.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-TACACS_NOSERV Warning: Server [chars] is not configured
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-WARN_IN_SG WARNING: Server [chars] is still referenced by server group
Explanation A TACACS+ server has been removed which is still included in a server group.
Recommended Action The server group which references the removed server should be edited to remove the reference, or the removed server should be added back to the list of TACACS+ hosts.
Error Message%SECURITY-TACACSD-6-INTRFC_STATE_QUERY_FAILED Failed to apply source interface for [chars] - [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-NO_CMD No valid command provided for [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-NULL_REQ Encountered a NULL request pointer while [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-SERVER_DOWN TACACS+ server [chars]/[dec] is DOWN - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-TIMEOUT_IGNORED A time out event has been ignored
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
