-
Cisco IOS XR System Error Message Reference Guide, Release 3.2
-
Preface
-
Cisco IOS XR System Error Messages Overview
-
Access Control List (ACL) Error Messages for Cisco IOS XR
-
Fabric (FABRIC) Error Messages for Cisco IOS XR
-
Hardware Accessibility (HA) Messages for Cisco IOS XR
-
Installation (INSTALL) Messages for Cisco IOS XR
-
Internet Protocol (IP) Messages for Cisco IOS XR
-
Layer 2 (L2) Messages for Cisco IOS XR
-
Media (MEDIA) Messages on Cisco IOS XR
-
Manageability (MGBL) Messages for Cisco IOS XR
-
Operating System (OS) Messages for Cisco IOS XR
-
Packet Infrastructure (PKT_INFRA) Messages for Cisco IOS XR
-
Platform (PLATFORM) Messages for Cisco IOS XR
-
Quality of Service (QOS) Messages for Cisco IOS XR
-
Routing (ROUTING) Messages for Cisco IOS XR
-
Security (SECURITY) Messages for Cisco IOS XR
-
Simple Network Management Protocol (SNMP) Messages for Cisco IOS XR
-
System Database (SYSDB) Messages for Cisco IOS XR
-
Feedback
Table Of Contents
Fabric Messages
This section contains all Fabric (hardware and software both) related System Error Messages. The following facility codes are represented in this module:
FAB_LC Messages
Error Message%FABRIC-FAB_LC-3-FATAL fab_lc: fatal error encountered, reason=[chars]
Explanation The LC fabric driver could not create a required resource for proper operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FAB_SVR Messages
Error Message%FABRIC-FAB_SVR-3-EVM_INIT_FAIL Event manager creation failed in the Fabric server
Explanation This indicates event manager creation is failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FAB_SVR-3-FATAL [chars] : [chars]
Explanation This indicates fatal error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FAB_SVR-7-DEBUG_INIT_FAIL [chars]: Debug initialization for the fab_svr/[chars] event failed: [chars]
Explanation An error was returned when the fabric server called the debug_init_event() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FAB_SVR-7-DEBUG_REGISTER_FAIL [chars]: Debug registration for Fab server driver failed: [chars]
Explanation An error was returned when the fabric server called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FABQ Messages
Error Message%FABRIC-FABQ-3-FATAL FABQ: fatal error encountered, reason=[chars]
Explanation Fabric Queue Driver encountered a fatal error and is not able recover from the error. A reason text will be supplied. Call support with this text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABQ-3-PKT_INIT_FAIL PKT_INIT: [chars] failed, rc=[dec], reason:[chars]
Explanation Packet carving function has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABQ-3-PKT_INIT_POOL PKT_INIT: particle_multi_pool_define failed ([chars]), rc=[dec], reason:[chars]
Explanation Initial carving of a packet particle pool has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABQ-3-SHOW_ERR FABQ_SHOW: fatal error encountered: [chars]
Explanation Error while executing a show command
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABQ-6-PKT_INIT_INFO PKT_INIT: pak mem size:[hex], pak mem start: [hex], pak scaling:[dec]
Explanation Information on packet memory carving
Recommended Action This is information and does not require any correction.
FABRIC_DRVR_ALARM Messages
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-BM_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in BM
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-CCS_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in CCS
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-FCM_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in FCM
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-FFM_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in FFM
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-MCQM_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in MC Queue Manager
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-MCQM_MINOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in MC Queue Manager
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-OS_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in OS
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-RX_PIPE_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in RX PIPE
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-TX_PIPE_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in TX PIPE
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR_ALARM-3-UCQM_MAJOR FABRIC DRVR alarm: [chars]
Explanation FABRIC DRVR, error in UC Queue Manager
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FABRIC_DRVR Messages
Error Message%FABRIC-FABRIC_DRVR-0-INIT_FAILED_FATAL A non-recoverable error occured during startup ([chars]). Fabric plane down
Explanation An error occurred during driver initialisation such that this fabric board cannot be brought up. This error is non-recoverable, and as such the fabric board cannot be bought up.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ASIC_ERROR ASIC ID: [chars]: [chars]
Explanation This indicates an error has occured in Switching element ASIC
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ASIC_NOTIF ASIC ID: [chars]: [chars]; Oper Status: [chars]
Explanation This indicates a Switching element ASIC has changed its operational status
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ATOMIC_QUEUE_ENQUEUE_ERROR atomic queue enqueue error, no space in ring, count: [dec], ring: [dec]
Explanation This indicates non fatal error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-BP_CFG_ERROR [chars]: Error in Back pressure configuration, BP Groups : [dec], [dec], [dec]
Explanation This indicates BP configuration recieved from the fabric control software incorrect. If this condition prevails, it could impact data traffic when fabric get congested.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ERROR [chars]
Explanation This indicates non fatal error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_GLACIAL [chars]
Explanation FABRIC error message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_NO_LIMIT [chars]
Explanation FABRIC error message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_SLOW [chars]
Explanation FABRIC error message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-EVENT_FAIL Event manager creation failed in the FABRIC driver
Explanation This indicates event manager creation has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-FATAL [chars]
Explanation This indicates fatal error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-FDI_CLIENT [chars]: FABRIC driver could not setup FDI client library: [chars]
Explanation The fdi client library returned the above error. Without the FDI client library, the FABRIC driver can not function correctly and will therefore restart.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-INIT_FAILED Initialisation of driver failed: [chars]. Driver will be restarted
Explanation An error occurred during driver initialisation such that this fabric board cannot be brought up. The string following the initial message details the reason for failure. After a short period of time another attempt will be made to start the driver.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-INTR_ATTACH [chars]: FABRIC driver could not attach interupt handler to hardware: [chars]
Explanation The driver attempted to attach the interupt handler to the hardware and failed. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The driver will restart to attempt to clear the problem.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-INTR_EVENT_MGR [chars]: FABRIC driver could not setup an event manager on the path: [chars]
Explanation The event manager creation call for the given path has failed. Without this event manager, the interupt thread cannot function. Because of this, the driver will restart.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-INTR_THREAD [chars]: FABRIC driver could not setup the interupt thread: [chars]
Explanation This indicates the thread creation has failed. This thread is used for all ASIC interupts into the driver. The driver can not perform its required functions without this ability and will therefore restart.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-INTR_UNMASK [chars]: FABRIC driver could not unmask interupt bits: [chars]
Explanation The driver attempted to unmask required interupt mask bits and failed. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The driver will restart to attempt to clear the problem.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-LINK_SHUT_DOWN Link: [chars]: Shutdown: [chars]
Explanation This indicates an error has occured in Fabric Switching Element links
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-MUTEX_ERROR ASIC ID: [chars]: Failed to [chars] [chars] mutex, [chars]
Explanation This indicates an error has occured in Switching element ASIC
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-NOTIFY_ERROR Error in sending notification messages, rc=[dec],[chars], source: [chars]
Explanation This indicates system error has occured while sending notification messages to fabric control software
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-PLD_UPGRADE Fatal Error: Check fabric PLD rev 0x1c or above is present
Explanation This indicates fatal error occured in the fabric board due to having older revision of PLD image.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-POD_INIT Failed to [chars] POD (node: [hex], module: [hex], asic: [unsigned int], POD: [unsigned int]). [chars]
Explanation Despite making several attempts, the switch fabric ASIC driver was unable to initialize one of the POD hardware modules. This may result in degraded switch fabric performance.
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRIC_DRVR-3-THREAD_CTL [chars]: FABRIC driver could not change interupt thread to an IO thread: [chars]
Explanation The driver attempted to change the interupt thread so that it could receive the IO messages. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The driver will restart to attempt to clear the problem.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-3-TIMER [chars]: FABRIC driver could not setup time thread: [chars]
Explanation This indicates thread creation has failed. This thread is used for statistics gathering and timer based link bringup. Since link bringup is critical to driver operation, the driver will restart.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-4-DRAIN_LINK_ERR [chars] has [dec] drain links, Choosen drain link: [chars]
Explanation Fabric element ASICs supposed to leave one link to drain queued cells when all the links associated with a queue is shut. If there are more than one link is left as a drain links, then this warning will be printed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-4-EVENT_INIT_FAIL Event connection creation failed in the FABRIC driver: [chars]
Explanation This event connection creation failed in the EDM initialization section. This does not directly affect driver operation, but show commands will not be available.
Recommended Action Check system closely for other fabric failures and correct. Contact support to deal with the EDM problem.
Error Message%FABRIC-FABRIC_DRVR-4-EVENT_NOTIFY_FAIL Event connection notifcation setup failed in the FABRIC driver: [chars]
Explanation This event connection notification setup failed in the EDM initialization section. This does not directly affect driver operation, but show commands will not be available.
Recommended Action Check system closely for other fabric failures and correct. Contact support to deal with the EDM problem.
Error Message%FABRIC-FABRIC_DRVR-4-LTRACE_FAIL [chars]: Failed to setup a trace buffer for ltrace: [chars]
Explanation The given error occured while trying to setup the ltrace buffers. Because of the, ltrace show commands will not be available from the FABRIC driver. This does not interfere with driver operation, but does limit diagnostic abilities considerably.
Recommended Action Check system closely for other fabric failures and correct. Contact support to deal with the ltrace problem.
Error Message%FABRIC-FABRIC_DRVR-6-ASIC_INITIALIZED Fabric ASICs initialized
Explanation This indicates Fabric ASICs are initialized
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-6-FAB_MODULE [chars]
Explanation This is to give infomation regarding fabric module type
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-6-RSERR RS error: [chars] [dec] [dec] [dec]
Explanation This indicates RS errors
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-ASIC_ACCESS_UNDER_RESET Access to [chars] while ASIC being reset: [hex] ([hex])
Explanation A read/write access was made to an ASIC which was being reset
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-DEBUG_INIT_FAIL [chars]: Debug initialization for the fabric_drvr/[chars] event failed: [chars]
Explanation An error was returned when the FABRIC driver called the debug_init_event() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-DEBUG_REGISTER_FAIL [chars]: Debug registration for FABRIC driver failed: [chars]
Explanation An error was returned when the FABRIC driver called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-ERRRATE_EXCEED_DEBUG [chars]
Explanation FABRIC error messages for debugging purpose.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-LINK_ERROR Topology mismatch for [chars]
Explanation The upstream information received from idle cell on this link
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-S1_LINK_ERROR_INFO Reg: [dec] [dec] [dec] FSDB: [dec] [dec] [dec]
Explanation Expected topology and received topology
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRIC_DRVR-7-S2_3_LINK_ERROR_INFO Reg: [dec] [dec] [dec] [dec] FSDB: [dec] [dec] [dec] [dec]
Explanation Expected topology and received topology
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FABRICQ_MGR Messages
Error Message%FABRIC-FABRICQ_MGR-3-DEBUG1 fabricq_mgr: [chars] [hex]([hex])
Explanation fabricq_mgr debug message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-DEBUG2 fabricq_mgr: [chars]
Explanation fabricq_mgr debug message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-FATAL fabricq_mgr: fatal error encountered, reason=[chars]
Explanation iq manager encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-FATAL_2 fabricq_mgr: fatal error encountered, reason=[chars], errno=[dec]
Explanation fabricq_mgr encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-GEN_INFO fqm: general information,
Explanation The fabricq_mgr informational message.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-INFO fabricq_mgr: [chars]
Explanation The fqm encountered an error that would lead to degraded service.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-MALLOC_FAILED fabricq_mgr: fatal memory allocation error for bytes
Explanation fabricq_mgr encountered a fatal memory allocation error
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message%FABRIC-FABRICQ_MGR-3-NOT_YET_IMPLEMENTED fabricq_mgr: this function is not yet implemented
Explanation fabricq_mgr, a function was not implemented.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-3-USAGE fabricq_mgr: invalid option passed to fabricq server
Explanation Startup option supplied to fabricq_mgr is not valid.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ_MGR-4-LTRACE_FAIL [chars]: Failed to setup a trace buffer for ltrace: [chars]
Explanation The given error occured while trying to setup the ltrace buffers. Because of the, ltrace show commands will not be available from the fabricq manager. This does not interfere with driver operation, but does limit diagnostic abilities considerably.
Recommended Action Check system closely for other fabric failures and correct. Contact support to deal with the ltrace problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FABRICQ Messages
Error Message%FABRIC-FABRICQ-2-FCRAM_BIST_FAILURE fcram bist failure on channel: [dec], count: [dec], error_addr: [hex]
Explanation Sprayer encountered an bist test error indicated.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-2-FI_TOPOLOGY Fabric topology inconsistency detected for ASIC [unsigned int] link [unsigned int] (observed topology information: [hex], expected: [hex])
Explanation An inconsistency between the expected and observed topologies of the fabric was detected.
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-2-FSDB_FABADDR_FAILED fsdb_fabric_address_from_node api failed, retry count: [dec]
Explanation API Failure
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-2-SPI_FBP_CLUSTER_NOT_ENABLED fabric backpressure cluster not enabled : [dec]
Explanation API Failure
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-ADDRESS_ERROR fabricq: Major error in [chars], Hardware detected an address error on fabricq asic [dec]
Explanation Fabricq Asic encountered a memory address error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-CORRECTABLE_ERROR fabricq: Minor error: [chars], Hardware detected a single bit error on fabricq asic [dec] and has corrected it
Explanation Fabricq Asic encountered a memory correctable error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-CORRECTABLE_RESET_ERROR fabricq: Major error: [chars], Hardware detected many single bit errors on fabricq asic [dec]
Explanation Fabricq Asic encountered a memory correctable error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-CRITICAL fabricq: Critical error: [chars], [dec]
Explanation fabricq, Critical alarm
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-CTX_CORRECTABLE_ERROR fabricq: Major error in PCL CTX, Hardware detected many single bit errors on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_cr_ea [hex]
Explanation Fabricq Asic encountered a large number of correctable memory errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-CTX_UNCORRECTABLE_ERROR fabricq: Major error in PCL CTX, Hardware detected many multi bit errors on fabricq asic [dec]. Details of last error: spo_pcl_reg_cr_ea [hex] [hex] spo_pcl_mem_pp_cr [hex] [hex]
Explanation Fabricq Asic encountered a large number of correctable memory errors recommended_action: *SUPPORT*
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-DEBUG1 fabricq: [chars] [dec]([hex])
Explanation Fabricq Asic debug message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-DEBUG2 fabricq: [chars]
Explanation Fabricq Asic debug message
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-DMA_ERROR fabricq: Error during DMA transfer: Source Addr [hex], Dest Addr [pointer]
Explanation An error occurred while a DMA transfer initiated by the FQM process was taking place. This means certain data requested by the FQM process will not be available.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-DMA_TIMED_OUT fabricq: DMA transfer timed out: Source Addr: [hex], Dest Addr: [pointer]
Explanation A DMA transfer initiated by the FQM Process has timed out. This means that data the FQM process has requested did not become available within the timeout period.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-FATAL fabricq: Fatal error encountered: [chars], [chars]:[dec]
Explanation Fabricq Asic driver encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-FATAL_2 fabricq: fatal error encountered, reason=[chars], errno=[dec]
Explanation spo encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-FCRAM fabricq: Major error in Fabricq ASIC [dec]. FCRAM Channel [dec] [chars] error.
Explanation Fabricq ASIC encountered a FCRAM Channel error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FI_CORR_ERRORS fabricq: Major error in Fabric Interface : RS Correctable errors on Fabricq ASIC [dec] link [dec]
Explanation Fabricq ASIC encountered link RS correctable errors exceeding threshold
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FI_LINK_ALARM fabricq: Major error in Fabric Interface : Link Alarm on Fabricq ASIC [dec] link [dec]
Explanation Fabricq ASIC encountered a link alarm
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FI_PARITY_ERROR fabricq: Major error in Fabric Interface : Link Parity errors on Fabricq ASIC [dec] link [dec]
Explanation Fabricq ASIC encountered link parity errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FI_UNCORR_ERROR fabricq: Major error in Fabric Interface : RS Uncorrectable errors on Fabricq ASIC [dec] link [dec]
Explanation Fabricq ASIC encountered a link RS uncorrectable error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_ADDR fabricq: Major error in Fabricq ASIC [dec]. FQM memory too many address errors.
Explanation Fabricq ASIC encountered a FQM excessive address errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_BR fabricq: Major error in Fabricq ASIC [dec]. FQM BR [chars] error.
Explanation Fabricq ASIC encountered a FQM BR error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_CORR fabricq: Major error in Fabricq ASIC [dec]. FQM memory too many correctable errors.
Explanation Fabricq ASIC encountered a FQM excessive correctable errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_DENY fabricq: Major error in Fabricq ASIC [dec]. FQM [chars] Deny error, Need to recarve.
Explanation Fabricq ASIC encountered a FQM Vital/Non vital deny error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_PARITY fabricq: Major error in Fabricq ASIC [dec]. FQM [chars] Parity error
Explanation Fabricq ASIC encountered a FQM parity error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_STACK fabricq: Major error in Fabricq ASIC [dec]. FQM FQMEM Stack [chars] error.
Explanation Fabricq ASIC encountered a FQM FQMEM Stack error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-FQM_UNCORR fabricq: Major error in Fabricq ASIC [dec]. FQM memory too many uncorrectable errors.
Explanation Fabricq ASIC encountered a FQM excessive uncorrectable errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-GEN_INFO fabricq: general information,
Explanation The Fabricq Asic's informational message.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-INFO fabricq: service degrading error, reason = [chars]
Explanation The fabricq asic encountered an error that would lead to degraded service.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-LINK_ALARM fabricq: Major error: [chars], Hardware detected an alarm on fabricq asic [dec]
Explanation Fabricq Asic encountered an alarm
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-LUT_ADDR_ERROR fabricq: Major error in PCL LUT, Hardware detected an address error on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_lut_ed [hex]
Explanation Fabricq Asic encountered a large number of correctable memory errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-LUT_CORRECTABLE_ERROR fabricq: Major error in PCL LUT, Hardware detected many single bit errors on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_lut_ed [hex]
Explanation Fabricq Asic encountered a large number of correctable memory errors recommended_action: *SUPPORT*
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-LUT_UNCORRECTABLE_ERROR fabricq: Major error in PCL PSM, Hardware detected a multibit error on fabricq asic [dec]. spo_pcl_mem_pp_lr_[unsigned int] [hex] [hex], spo_pcl_reg_psm_ea_ee [hex] [hex], spo_pcl_reg_lut_ed [hex] [hex]
Explanation Fabricq Asic encountered a uncorrectable memory error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-MAJOR fabricq: Major error: [chars], [dec]
Explanation fabricq, Major alarm
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-MALLOC_FAILED fabricq: fatal memory allocation error for bytes
Explanation Fabricq Asic encountered a fatal memory allocation error
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message%FABRIC-FABRICQ-3-MI_BPDECODE fabricq: Major error in Fabricq ASIC [dec]. MI [chars] Backpressure decode error
Explanation Fabricq ASIC encountered a MI Unicast/Multicast BP Decode error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-MI_MISSING_EOP fabricq: Minor error in Fabricq ASIC [dec]. MI [chars] Missing EOP error
Explanation Fabricq ASIC encountered a MI Unicast/Multicast Missing EOP error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-MI_UNEXP_EOP fabricq: Minor error in Fabricq ASIC [dec]. MI [chars] Unexpected EOP error
Explanation Fabricq ASIC encountered a MI Unicast/Multicast Unexpected EOP error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-MI_WEDGE fabricq: Major error in Fabricq ASIC [dec]. MI [chars] Wedged
Explanation Fabricq ASIC encountered a MI Unicast/Multicast Wedge error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-MINOR fabricq: Minor error: [chars], [dec]
Explanation fabricq, Minor alarm
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-NOT_YET_IMPLEMENTED fabricq: this function is not yet implemented
Explanation fabricq, a function was not implemented.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-OQM_ADDRESS_ERROR fabricq: Major error in [chars], Hardware detected an address error on Fabricq ASIC [dec]. [hex] spo_oqm_mem_oqmda [hex], [hex] spo_oqm_reg_ecc_addr [hex], [hex] spo_oqm_reg_ecc_data [hex].
Explanation Fabricq ASIC encountered a memory address error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-OQM_CORRECTABLE_ERROR fabricq: Major error in [chars], Hardware detected many single bit errors on Fabricq ASIC [dec]. Details of last error: [hex] spo_oqm_reg_ecc_addr [hex], [hex] spo_oqm_reg_ecc_data [hex].
Explanation Fabricq ASIC encountered a correctable memory error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-OQM_OOR fabricq: Major error in Fabricq ASIC [dec]. OQM [chars] OOR error.
Explanation Fabricq ASIC encountered a OQM OOR error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-OQM_PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]
Explanation Fabricq Asic encountered a parity error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-OQM_QUEUE_CONF SPO: An error occured while trying to program queues for port [unsigned int]
Explanation An error occured while the fabricq driver was trying to create queues for an interface. This may leave one or more interfaces out of operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-OQM_UNCORRECTABLE_RESET_ERROR fabricq: Major error in [chars], Hardware detected a multibit error on Fabricq ASIC [dec]. [hex] spo_oqm_mem_oqmda [hex], [hex] spo_oqm_reg_ecc_addr [hex], [hex] spo_oqm_reg_ecc_data [hex].
Explanation Fabricq ASIC encountered a uncorrectable memory error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]
Explanation Fabricq Asic encountered a parity error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_CCNT_ERR fabricq: Major error in PCL of fabricq asic [dec]: [chars] data.
Explanation Sponge encountered a PCL cell count mistmatch error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_CSLOT_SYNC fabricq: Major internal error in PCL of fabricq asic [dec]: [chars].
Explanation Sponge encountered a PCL internal error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_FCH_DISCARD fabricq: Major error in PCL of fabricq asic [dec]: [chars].
Explanation Sponge encountered a PCL FCH discard error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_HALF_DEPTH_PART SPO: Half depth PCL LUT memory detected. Device: [unsigned int], Bank: [unsigned int].
Explanation The fabricq driver has detected that the PCL LUT memory block is only half the size it should be. The board should be upgraded to the full memory configuration.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FABRICQ-3-PCL_LUT_PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]
Explanation Fabricq Asic encountered a parity error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]
Explanation Fabricq Asic encountered a parity error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_PKT fabricq: Minor error in PCL of fabricq asic [dec]. [chars]
Explanation Sponge encountered a PCL Packet error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PCL_XCELL_ERR fabricq: Major error in PCL of fabricq asic [dec]: [chars]
Explanation Sponge encountered a PCL extra cell error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PMI_OOR fabricq: Minor error in Fabricq ASIC [dec]. PMI [chars] OOR error.
Explanation Fabricq ASIC encountered a PMI OOR error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PMI_QC_OOR fabricq: Major error in Fabricq ASIC [dec]. PMI [chars] OOR error.
Explanation Fabricq ASIC encountered a PMI OOR error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSM_ADDRESS_ERROR fabricq: Major error in PCL PSM, Hardware detected an address error on fabricq asic [dec]. [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_psm_ed_msb [hex], [hex] spo_pcl_reg_psm_ed_lsb [hex].
Explanation Fabricq Asic encountered a memory address error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSM_CORRECTABLE_ERROR fabricq: Major error in PCL PSM, Hardware detected many single bit errors on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_psm_ed_msb [hex], [hex] spo_pcl_reg_psm_ed_lsb [hex].
Explanation Fabricq Asic encountered a large number of correctable memory errors
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSM_FPOOL_LWATER fabricq: Minor error in PCL of fabricq asic [dec]. Hardware running on low resources
Explanation Sponge encountered a PCL PSM Freel Pool Low water error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSM_FREE_POOL_OFLOW fabricq: Major error in PCL of fabricq asic [dec].
Explanation Fabricq Asic encountered a PCL PSM Free Pool Overflow error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSM_OOR fabricq: Major error in PCL of fabricq asic [dec]. [hex] spo_pcl_reg_pfpo [hex]
Explanation Sponge encountered a PCL PSM Out of resource error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSM_UNCORRECTABLE_ERROR fabricq: Major error in PCL PSM, Hardware detected a multibit error on fabricq asic [dec]. spo_pcl_mem_pp_pr_[unsigned int] [hex] [hex], spo_pcl_reg_psm_ea_ee [hex] [hex], spo_pcl_reg_psm_ed_msb [hex] [hex], spo_pcl_reg_psm_ed_lsb [hex] [hex].
Explanation Fabricq Asic encountered a uncorrectable memory error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-PSN_WRAP fabricq: Major error in PCL of fabricq asic [dec]: [chars] . [hex] spo_pcl_mem_ppbr [hex][hex]%08x[hex]%08x[hex]%08x[hex]
Explanation Sponge encountered a PCL Packet Sequence Wrap error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SPI_BM fabricq: Minor error:Fabricq ASIC [dec] has SPI Barrier [chars] error
Explanation Fabricq ASIC encountered a SPI Barrier error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SPI_BM_IDLE fabricq: Major error:Fabricq ASIC [dec] has Idle Aggregated Phase for Barriers.
Explanation Fabricq ASIC encountered a SPI Barrier Idle Aggregated phase error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SPI_DHE fabricq: Minor error:Fabricq ASIC [dec] has SPI DHE [chars] error
Explanation Fabricq ASIC encountered a SPI Discard Hiccup error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SPI_DIS_OFLOW fabricq: Major error:Fabricq ASIC [dec] has SPI discard overflow error. Changing interval
Explanation Fabricq ASIC encountered a SPI Fabric Backpressure error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SPI_PARITY fabricq: Minor error:Fabricq Asic [dec] has SPI [chars] Parity error
Explanation Fabricq ASIC encountered a SPI Fabric Backpressure error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SQI_MISSING_EOP fabricq: Minor error in Fabricq ASIC [dec]. SQI [chars] Missing EOP error
Explanation Fabricq ASIC encountered a SQI Missing EOP error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SQI_SN8 fabricq: Major error in Fabricq ASIC [dec]. Squinet [chars] error
Explanation Fabricq ASIC encountered a Squinet CRC/Sync error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SQI_TRG fabricq: Major error in Fabricq ASIC [dec]. Squinet [chars] error
Explanation Fabricq ASIC encountered a trigger Condition
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SQI_UNEXP_EOP fabricq: Minor error in Fabricq ASIC [dec]. SQI [chars] Unexpected EOP error
Explanation Fabricq ASIC encountered a SQI Unexpected EOP error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-SQI_WEDGE fabricq: Major error in Fabricq ASIC [dec]. SQI Wedged
Explanation Fabricq ASIC encountered a SQI Wedge error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-TRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]
Explanation The fabricq driver tracing functionality could not be initialized. The component is still fully functional, but affects only debugging capabilities in case of any problems.
Recommended Action No action is required.
Error Message%FABRIC-FABRICQ-3-UNCORRECTABLE_ERROR fabricq: Major error in [chars], Hardware detected a multibit error on fabricq asic [dec]
Explanation Fabricq Asic encountered a memory uncorrectable error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-3-URG_CTX fabricq: Major error in PCL of fabricq asic [dec]. Urgent Context exceeded 5 = [hex]
Explanation Sponge encountered a PCL Urgent Context error
Recommended Action *SUPPORT*
Error Message%FABRIC-FABRICQ-6-SPI_FBP fabricq: Major error:Cluster: [dec] in Fabricq ASIC [dec] has SPI FBP [chars] error
Explanation The fabricq asic encounted a fabric backpressure error. These sort of errors are to be expected during bootup or during OIR events, and are harmless for the vast majority of the time. The only time they would signify a serious error is if they recur for long periods.
Recommended Action If these messages are recurring and/or you're seeing other faults (such as traffic loss) then contact your support agent.
FDI Messages
Error Message%FABRIC-FDI-3-BAD_MSG_ERROR [chars]: [chars] [dec]
Explanation Report.
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-BUFF_Q_ERROR [chars]: No Space to buffer msg. Conn_id [dec]. Data_Size [dec]. Buffer_states ([dec] [dec])
Explanation Report.
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars].
Explanation Internal error
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-CONN_ERROR [chars]: [chars]. Conn_id [dec] Conn_name [chars]
Explanation Report.
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-ERROR [chars]: [chars]. Error: [dec] [chars]
Explanation Report.
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-EVM_ATTACH [chars]: FDI API failed to attach to evm with rc [hex]
Explanation The FDI API failed to attach with Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FDI-3-FATAL_ERROR [chars]: [chars]. [dec] Error: [chars]
Explanation Report.
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-GSP_SEND_FAILED [chars]: gsp_send on conn [dec] seqnum [dec] failed with [dec]
Explanation Report.
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation FDI API has either failed a function that expected to succeed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FDI-3-NOMEM_ERR [chars]: Function [chars] was unable to allocate [dec] bytes
Explanation The FDI API failed to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FDI-6-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].
Explanation Informational message that a GSP lightweight group was gone
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-6-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].
Explanation Informational message that an unknown GSP message is received
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-7-DEBUG_CLEANUP_FAILED [chars]: Debug cleanup for fabric fdi library failed: [chars]
Explanation An error was returned when the fabric fdi library called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FDI-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fdi/[chars] event failed: [chars]
Explanation An error was returned when the fabric fdi library called the debug_init_event() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FDI-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric fdi library failed: [chars]
Explanation An error was returned when the fabric fdi library called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FDI-7-MSG_QUEUE_LIMIT_EXCEEDED [chars]: Internal FDI queue limit reached. Unable to send to clientid [dec]
Explanation Debug log msg to flag that FDI is unable to send msgs to clients
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-7-MSG_RETRY_COUNT_EXCEEDED [chars]: Msg to client [dec] retry count exceeded limit
Explanation Debug log msg to flag that FDI is unable to send msgs to clients
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-7-MSG_RETRY_FAILED [chars]: Msg to client [dec] retry send failed
Explanation Debug log msg to flag that FDI is unable to send msgs to clients
Recommended Action 'No action is required.'
Error Message%FABRIC-FDI-7-MSG_STALE_DATA_FOUND [chars]: stale msg found update with new data for client [dec]
Explanation Debug log msg found stale data
Recommended Action 'No action is required.'
FGID_AGG Messages
Error Message%FABRIC-FGID_AGG-3-DEBUG_ERR [chars]: FGID Aggregator unable to register for dbg rc [hex]
Explanation The FGID-DB aggregator unable to register for debugging
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_AGG-3-EVM_ATTACH [chars]: FGID Aggregator unable to attach to evm with rc [hex]
Explanation The FGID-DB aggregator unable to attach with Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_AGG-3-EVM_ERR [chars]: FGID Aggregator unable to create [chars] evm with rc [hex]
Explanation The FGID-DB aggregator unable to create Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_AGG-3-GSP_ERR [chars]:FGID Aggregator unable to create/join group with rc [hex]
Explanation The FGID-DB aggregator unable to create/join GSP group
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_AGG-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_AGG-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]
Explanation Could not open ltrace buffer
Recommended Action No action is required.
Error Message%FABRIC-FGID_AGG-3-MEM_ERR [chars]: FGID Aggregator unable to allocate [dec] bytes
Explanation The FGID-DB aggregator unable to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_AGG-3-UNKNOWN [chars]: FGID Aggregator fails due to an unknown error
Explanation The FGID-DB aggregator fails due to an unknown error
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FGID_ALLOC Messages
Error Message%FABRIC-FGID_ALLOC-3-BAG_REG_FAILED [chars]:FGID allocator unable to register FGID bags; [chars]
Explanation The FGID-DB allocator unable to register FGID bags
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-DEBUG_ERR [chars]: FGID Allocator unable to register for dbg rc [hex]
Explanation The FGID-DB allocator unable to register for debugging
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-EVM_ATTACH [chars]: FGID Allocator unable to attach to evm with rc [hex]
Explanation The FGID-DB allocator unable to attach with Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-EVM_ERR [chars]: FGID Allocator unable to create [chars] evm with rc [hex]
Explanation The FGID-DB allocator unable to create Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-GSP_ERR [chars]:FGID Allocator unable to create/join group [chars] with rc [hex]
Explanation The FGID-DB allocator unable to create/join GSP group
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation An FGID Allocator internal software error occurred.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]
Explanation Could not open ltrace buffer
Recommended Action No action is required.
Error Message%FABRIC-FGID_ALLOC-3-MEM_ERR [chars]: FGID Allocator unable to allocate [dec] bytes
Explanation The FGID-DB allocator unable to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-SYSDB_BIND_FAILED [chars]:FGID Allocator unable to bind to Sysdb name space [chars]; [chars]
Explanation The FGID-DB allocator unable to bind to sysdb.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-SYSDB_EDM_REG_FAILED [chars]:FGID allocator unable to perform EDM registration; [chars]
Explanation The FGID-DB allocator unable to register EDM handlers
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-SYSMGR_PROC_AVAIL_FAILED [chars]: sysmgr_proc_available failed: [chars]
Explanation Internal error
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-SYSMGR_PROC_READY_FAILED [chars]: sysmgr_proc_ready failed: [chars]
Explanation Internal error
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_ALLOC-3-UNKNOWN [chars]: FGID Allocator fails due to an unknown error
Explanation The FGID-DB allocator fails due to an unknown error
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FGID_BCDL_CONSUMER Messages
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-BOARD_ERR [chars]: failed to get hardware board type: rc = [dec]; [chars]
Explanation An error occurred during accessing hardware board type.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-DEBUG_INIT_ERR [chars]: failed to initialize debug; rc = [hex]; [chars]
Explanation An error occurred during debugging initializatione.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-EVM_ERR [chars]: FGID BCDL consumer unable to create evm; errno = [dec], [chars]
Explanation The FGID-DB BCDL consumer unable to create Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-GET_RACK_ERR [chars]: failed to get rack value; rc = [hex]; [chars]
Explanation An error occurred during retrieving rack value from nodeid.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]
Explanation Could not open ltrace buffer
Recommended Action No action is required.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-MEM_ERR [chars]: FGID Server unable to allocate [dec] bytes
Explanation The FGID BCDL consumer unable to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-NOTI_FGID_DOWNLOAD_DONE_ERR [chars]: Unable to notify SEA driver about FGID download complete; rc = [hex]; [chars]
Explanation An error occurred during notifying the FGID downlaod completion.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-SET_FGID_ERR [chars]: failed to set FGID [chars] bitmap; rc = [hex]; [chars]
Explanation An error occurred during setting S2 or S3 bitmap.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BCDL_CONSUMER-3-USAGE [chars]: Invalid argument. USAGE: [chars]
Explanation The server process was invoked with an unknown argument.
Recommended Action *SUPPORT*
FGID_BITMASK Messages
Error Message%FABRIC-FGID_BITMASK-3-DEBUG_ERR [chars]: FGID Bitmask slot[dec] unable to register for dbg rc [hex]
Explanation The FGID-DB aggregator unable to register for debugging
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BITMASK-3-EVM_ATTACH [chars]: FGID Bitmask Proc [dec] unable to attach to evm rc [hex]
Explanation The FGID-DB Bitmask process unable to attach to Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_BITMASK-3-EVM_ERR [chars]: FGID Bitmask Process [dec] unable to create evm rc [hex]
Explanation The FGID-DB Bitmask process unable to create Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FGID_LIB Messages
Error Message%FABRIC-FGID_LIB-3-API_ERR [chars]: FGID-DB API failed with rc [hex]
Explanation The FGID-DB API failed
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_LIB-3-CONN_ERROR [chars]: FGID client library detects connect error
Explanation The FGID library detect LWM connection error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_LIB-3-DEBUG_SETUP [chars]: Problem in setting up debug because:[chars].
Explanation The fgid library was unable to setup debug information.
Recommended Action The fgid library should still be functional. However, support should be contacted to determine the underlying cause of the failure.
Error Message%FABRIC-FGID_LIB-3-EVM_ATTACH [chars]: FGID library on [dec] unable to attach to evm with rc [hex]
Explanation The FGID library unable to attach with Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_LIB-3-GET_CLIENTLIST_FAILED [chars]: Problem in getting FGID clients list. rc=[chars]
Explanation An attempt to get the current clientlist failed for the above reason.
Recommended Action *RECUR*
Error Message%FABRIC-FGID_LIB-3-INTERNAL [chars]: Function [chars] failed with rc [chars]
Explanation FGID library has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_LIB-3-LTRACE_FAIL [chars]: Problem in setting up ltrace because:[chars].
Explanation An attempt to setup the ltrace system failed.
Recommended Action *RECUR*
Error Message%FABRIC-FGID_LIB-3-MEM_ERR [chars]: Function [chars] was unable to allocate [dec] bytes
Explanation The FGID-DB API unable to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FGID_SVR Messages
Error Message%FABRIC-FGID_SVR-2-USAGE [chars]: Server Id requested [chars] is not a allowed server_id
Explanation Incorrect command line parameters were passed to the FGID-DB server, and so it failed to start.
Recommended Action Check the startup arguments passed to FGID-DB. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-BCDL_AGENT_START_ERR [chars]:FGID Server can't start BCDL Agent; rc = [hex]
Explanation The FGID server unable to start BCDL agent
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-BCDL_INIT_BUF_ERR [chars]:FGID Server can't initialize BCDL buffer; rc = [hex]
Explanation The FGID server unable to initialize BCDL buffer
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-EVM_ERR [chars]: FGID Server [chars] unable to create evm with rc [hex]
Explanation The FGID-DB server unable to create Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-GSP_ERR [chars]:FGID Server encountered GSP communication error rc [hex]
Explanation The FGID-DB server unable to create/join GSP group
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-GSP_GRP_CREATE_ERR [chars]:FGID Server encountered GSP group [chars] create error; rc = [hex]
Explanation The FGID server unable to create/join GSP group
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-GSP_GRP_NOTI_ERR [chars]:FGID Server encountered group set notify error; gid = [dec], rc = [hex]
Explanation The FGID server unable to set notification of GSP group
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FGID_SVR-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]
Explanation Could not open ltrace buffer
Recommended Action No action is required.
Error Message%FABRIC-FGID_SVR-3-MEM_ERR [chars]: FGID Server unable to allocate [dec] bytes
Explanation The FGID-DB server unable to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FSDB Messages
Error Message%FABRIC-FSDB-1-PLANE_CONFIG_ERR Detected fabric card topology conflicts with configured values for rack/slot: [dec]/[dec]. (Config: [dec], Detected: [dec])
Explanation The detected plane configuration for this multi-chassis system differs from the detected topology. This error will cause one or more fabric planes to stay down which will effect the bringup of the rest of the system. Possible causes could be incorrect admin plane configuration (ie the configuration states that slot 1 is the first card in a plane whereas slot 0 really is) or an incorrectly sized fiber module is inserted in a slot.
Recommended Action Check the admin plane configuration to ensure that it corresponds with the actual physical topology of the system. If this configuration looks correct then contact support, otherwise correct the configuration and the system should recover.
Error Message%FABRIC-FSDB-1-PLANE_UPDOWN Plane [dec] state changed to [chars]: [chars]
Explanation The plane is down which means that the sprayer cannot reach *any* destination on the plane. This a symptom of too many other fabric errors (DESTINATION_UPDOWN) than an error itself.
Recommended Action None.
Error Message%FABRIC-FSDB-1-SYSDB_ERR [chars] : [chars]
Explanation Error in sysdb operation.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message%FABRIC-FSDB-2-CONTROL_MSG_ERROR Rack [dec] sent illegal fabric control message - [chars]
Explanation Fabric control software running in another rack has notified a status change that is impossible or illegal.
Recommended Action This error can be caused by an attempt to use the router with in a fabric configuration that is not supported. For example, there may be three or more linecard racks that have dual-rack fabric cards installed. Ensure that the correct racks are installed in the router and that software displays the correct rack numbers and rack types for each rack. Ensure that the software fabric configuration is correct. If these steps do not find an error, restart fabric control software on the rack that produced this message, and on the rack sending the illegal message.
Error Message%FABRIC-FSDB-2-DESTINATION_UPDOWN Destination [dec] availability for source group [dec] from plane [dec] changed to [chars]
Explanation No path can be found from the sprayer to the sponge.
Recommended Action None
Error Message%FABRIC-FSDB-2-FATAL_ERR [chars] : [chars]
Explanation A critical function failed that expected to succeed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSDB-2-INTERNAL_ERR [chars] : [chars]
Explanation A critical function failed that expected to succeed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSDB-2-NOMEM Failed to allocate [dec] bytes due to memory shortage
Explanation Memory on the router is critically low.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message%FABRIC-FSDB-2-PARSE_ERROR Parse error in fabric definition file [chars], line [dec]
Explanation A file describing switch fabric components has errors. Some fabric components cannot be brought into service.
Recommended Action A failed or incomplete software upgrade could cause this error. It could also be caused by corruption of an existing definition file. Ensure that the definition file is not damaged. If the problem persists, re-install the fabric control software.
Error Message%FABRIC-FSDB-3-A_EVM_ERR [chars]: [chars], [chars]
Explanation A failure to create event manager in FSDB Auxillary server was detected
Recommended Action No action is necessary unless the message recurs
Error Message%FABRIC-FSDB-3-UNKNOWN_FAB_DEF Cannot find fabric definition file [chars]
Explanation A file describing switch fabric components is not present on the router.
Recommended Action If the hardware installed in the router has changed, ensure that fabric control software has been upgraded to the correct version. If the correct software has been installed, report the problem to technical support.
Error Message%FABRIC-FSDB-4-INTERNAL_WARN [chars] : [chars]
Explanation A function failed unexpectedly. It is possible to continue operation, although there may be some non-critical errors noticeable.
Recommended Action No action is necessary unless the message recurs or other components are generating similar errors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSDB-7-MISC_INFO [chars]
Explanation Miscellaneous information about FSDB state.
Recommended Action None.
FSDBLIB Messages
Error Message%FABRIC-FSDBLIB-2-FAIL [chars]: [chars] errno [[hex]] [[chars]]
Explanation There was a critical failure.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Error Message%FABRIC-FSDBLIB-2-INFRA_FAIL [chars]: Error detected: [chars]; [chars]
Explanation Software was unable to access system configuration data that should be available to all processes.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSDBLIB-3-COMM_FAIL [chars]: IPC error: [chars]; [chars]
Explanation Software could not contact the FSDB server. This could be a temporary condition caused by a delay in server startup. However, if the problem persists it indicates a software fault.
Recommended Action No action is required unless the message recurs. In this case, first fix any problems with the FSDB server. Use the show process command to confirm that the FSDB server is running, and check for any messages that indicate a problem from the server. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSDBLIB-3-NOMEM_ERR [chars]: Could not allocate memory for [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSDBLIB-4-INFRA_WARN [chars]: Warning: [chars]; [chars]
Explanation Software encountered an error when attempting to access or modify system configuration data. However, only cosmetic effects on system behavior are expected.
Recommended Action No action is required.
FSTATSA Messages
Error Message%FABRIC-FSTATSA-2-FAIL [chars]: [chars] errno [[hex]] [[chars]]
Explanation Threre was a critical failure.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Error Message%FABRIC-FSTATSA-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars]; rc = [dec].
Explanation Internal error
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSA-3-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].
Explanation Internal error
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSA-3-EVENT_CONN_CREATE_FAILED [chars]: could not create connection structure for the connection to [chars]: [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSA-3-EVENT_CONN_NOTIFY_FAILED [chars]: could not set notify handler for connection opens and errors to [chars] : [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSA-3-EVENT_CONN_OPEN_FAILED [chars]: could not open connection to [chars] : [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSA-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-3-NOMEM_ERR [chars]: Could not allocate memory for [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-3-SYSMGR_PROC_READY_FAILED [chars]: sysmgr_proc_ready failed: [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSA-6-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].
Explanation Informational message that an unknown GSP message is received
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSA-6-SERVER_EXITING hfr_fstats_server exiting. This should never happen
Explanation Informational message that hfr_fstats_server process is exiting.
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSA-6-SYSDB_EDM_REG_DONE [chars]: sysdb EDM register is done.
Explanation Informational message that IMDS sysdb EDM is done.
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSA-7-BAG_REG_FAILED [chars]: bag register error is detected; [chars].
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSA-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fstats/aggr/[chars] event failed: [chars]
Explanation An error was returned when the fabric statistics aggregator called the debug_init_event() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric statistics aggregator failed: [chars]
Explanation An error was returned when the fabric statistics aggregator called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-7-EVM_CREATE_FAILED [chars]: event_manager_create failed; [chars]
Explanation The event_manager_create function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-7-SYSDB_BIND_FAILED [chars]: Can't bind to SysDB at [chars]: [chars]
Explanation The sysdb_bind function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-7-SYSDB_CONN_ERROR [chars]: sysdb connection error is detected.
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSA-7-SYSDB_EDM_REGISTER_FAILED [chars]: Can't register EDM to SysDB at [chars]: [chars]
Explanation The sysdb_register_edm function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSA-7-SYSDB_UNBIND_FAILED [chars]: Can't unbind from SysDB at [chars]: [chars]
Explanation The sysdb_unbind function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FSTATSC Messages
Error Message%FABRIC-FSTATSC-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars].
Explanation Internal error
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSC-3-EVM_ATTACH [chars]: FSTATS client API is failed to attach to evm with rc [hex]
Explanation The FSTATS client API is failed to attach with Event Manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSC-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation FSTATS client API has either failed a function that expected to succeed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSC-3-NOMEM_ERR [chars]: Function [chars] was unable to allocate [dec] bytes
Explanation The FSTATS client API is failed to allocate memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSC-7-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].
Explanation Informational message that a GSP lightweight group was gone
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSC-7-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].
Explanation Informational message that an unknown GSP message is received
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSC-7-DEBUG_CLEANUP_FAILED [chars]: Debug cleanup for fabric statistics client library failed: [chars]
Explanation An error was returned when the fabric client library called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSC-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fstats/client/[chars] event failed: [chars]
Explanation An error was returned when the fabric client library called the debug_init_event() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSC-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric statistics client library failed: [chars]
Explanation An error was returned when the fabric client library called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
FSTATSS Messages
Error Message%FABRIC-FSTATSS-2-FAIL [chars]: [chars] errno [[hex]] [[chars]]
Explanation Threre was a critical failure.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Error Message%FABRIC-FSTATSS-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars]; rc = [dec].
Explanation Internal error
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-3-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].
Explanation Internal error
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-3-EVENT_CONN_CREATE_FAILED [chars]: could not create connection structure for the connection to [chars]: [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-3-EVENT_CONN_NOTIFY_FAILED [chars]: could not set notify handler for connection opens and errors to [chars] : [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-3-EVENT_CONN_OPEN_FAILED [chars]: could not open connection to [chars] : [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-3-NOMEM_ERR [chars]: Could not allocate memory for [chars].
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-3-RSC_REG_INCONSISTENT_VALUE_ERR [chars]: fabric resource registration error due to inconsistent value.
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-3-SYSMGR_PROC_READY_FAILED [chars]: sysmgr_proc_ready failed: [chars]
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-6-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].
Explanation Informational message that an unknown GSP message is received
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-6-SERVER_EXITING hfr_fstats_server exiting. This should never happen
Explanation Informational message that hfr_fstats_server process is exiting.
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-6-SYSDB_CONN_CLOSED [chars]: sysdb connection was closed.
Explanation Informational message that sysdb connection was closed.
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-6-SYSDB_CONN_OPENED [chars]: sysdb connection was opened.
Explanation Informational message that sysdb connection was opened.
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-6-SYSDB_EDM_REG_DONE [chars]: sysdb EDM register is done.
Explanation Informational message that IMDS sysdb EDM is done.
Recommended Action 'No action is required.'
Error Message%FABRIC-FSTATSS-7-BAG_REG_FAILED [chars]: bag register error is detected; [chars].
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fstats/server/[chars] event failed: [chars]
Explanation An error was returned when the fabric statistics server called the debug_init_event() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric statistics server failed: [chars]
Explanation An error was returned when the fabric statistics server called the debug_register() function.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-7-EVM_CREATE_FAILED [chars]: event_manager_create failed; [chars]
Explanation The event_manager_create function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-7-SYSDB_BIND_FAILED [chars]: Can't bind to SysDB at [chars]: [chars]
Explanation The sysdb_bind function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-7-SYSDB_CONN_ERROR [chars]: sysdb connection error is detected.
Explanation Internal error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%FABRIC-FSTATSS-7-SYSDB_EDM_REGISTER_FAILED [chars]: Can't register EDM to SysDB at [chars]: [chars]
Explanation The sysdb_register_edm function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%FABRIC-FSTATSS-7-SYSDB_UNBIND_FAILED [chars]: Can't unbind from SysDB at [chars]: [chars]
Explanation The sysdb_unbind function reported an error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
