Table Of Contents

Preface

Document Change History

Objectives

Organization

Related Documentation

Obtaining Documentation and Submitting a Service Request

Preface

---

Release 12.0(33)S, OL-8831-01, Rev. G9

This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:

•Document Change History

•Objectives

•Organization

•Related Documentation

•Obtaining Documentation and Submitting a Service Request

Document Change History

Table 1 provides a list of the changes to this document.

Table 1 Document Change History Table 

Release No.	Revision	Date	Change Summary
12.0(31)S	Release 12.0(31)S	April 26, 2005	Initial release and 1st publication. Provides descriptions and installation instructions for the following SPAs installed in a Cisco 12000 SIP-400 or a Cisco 12000 SIP-600: •1-Port 10-Gigabit Ethernet SPA •5-Port 10 Gigabit Ethernet SPA •10-Port Gigabit Ethernet SPA •2-Port and 4-Port Clear Channel T3/E3 SPA •2-Port and 4-Port Channelized T3 SPA •1-Port OC-192c/STM-64 POS/RPR SPA
12.0(31)S2	Release 12.0(31)S2	September 22, 2005	Provides descriptions and installation instructions for the following SPAs installed in a Cisco 12000 SIP-600: •2-Port OC-48c/STM-16 POS SPA
12.0(32)S	Release 12.0(32)S	January 20, 2006	Support for the following SPA interface processor (SIP) hardware was introduced on the Cisco 12000 Series Routers: •Cisco 12000 SIP-401 •Cisco 12000 SIP-501 •Cisco 12000 SIP-601 Provides descriptions and installation instructions for the following SPAs installed in a SIP 401/501/601 on Cisco 12000 series routers: •1-Port 10-Gigabit Ethernet SPA •8-Port FastEthernet SPA •10-Port Gigabit Ethernet SPA Support for the following hardware by the Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •1-Port OC-192c/STM-64 POS/RPR SPA •1-Port OC-192c/STM-64 POS/RPR XFP SPA Support for the following hardware by the Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •2-Port OC-48c/STM-16 POS SPA
12.0(32)SY	Release 12.0(32)SY	June 26, 2006	Support for the following hardware by the Cisco 12000 SIP-401, Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •8-Port Fast Ethernet SPA (SPA-8X1FE-TX-V2) •1-Port 10-Gigabit Ethernet SPA (SPA-1X10GE-L-V2) •2-Port Gigabit Ethernet SPA (SPA-2X1GE-V2) •5-Port Gigabit Ethernet SPA (SPA-5x1GE-V2) •10-Port Gigabit Ethernet SPA (SPA-10X1GE-V2) •2-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA •4-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA •4-Port OC-3c/STM-1 POS SPA •8-Port OC-3c/STM-1 POS SPA Support for the following hardware by the Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •8-port OC-12c/STM-4 POS SPA Support for the following hardware by the Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •8-Port Gigabit Ethernet SPA (SPA-8X1GE-V2)
12.0(32)SY1	Release 12.0(32)SY1	September 12, 2006	Support for the following hardware by the Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •1-Port OC-48c/STM-16 POS SPA
12.0(33)S	Release 12.0(33)S	April 26, 2007	Support for the following hardware by the Cisco 12000 SIP-401, Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •1-Port 10-Gigabit Ethernet SPA [WAN-PHY] (SPA-1X10GE-WL-V2) •1-Port 10-Gigabit Ethernet DWDM SPA (SPA-1X10GE-L-ITUC) Support for the following hardware by the Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router: •2-Port and 4-Port OC-48c/STM-16 POS SPA Information specific to BERT configuration for the following SPAs was introduced: •2-Port and 4-Port Channelized T3 SPA •8-Port Channelized T1/E1 SPA •1-Port Channelized OC-3/STM-1 SPA

Objectives

This document describes the SPA Interface Processors (SIPs) and shared port adaptors (SPAs) that are supported on the Cisco 12000 series routers. This document also describes how to install the supported SIPs and SPAs and how to troubleshoot the installation.

Organization

This document contains the following chapters:

Section	Title	Description
Chapter 1	Overview: Cisco 12000 Series Router SPA Interface Processors	Provides a SIP/SPA compatibility summary. For each supported SIP, provides a summary of SIP characteristics and a SIP overview.
Chapter 2	Overview: Cisco 12000 Series Router Shared Port Adapters	For each supported SPA, provides a summary of SPA characteristics and a SPA overview.
Chapter 3	Preparing to Install a SPA Interface Processor or a Shared Port Adapter	Describes the required tools, equipment, and safety guidelines for installing SIPs and SPAs.
Chapter 4	Installing and Removing a SPA Interface Processor	Describes the procedures for installing and removing a SIP on a Cisco 12000 series router.
Chapter 5	Installing and Removing a Shared Port Adapter	Describes the procedures for installing and removing a SPA on a Cisco 12000 series router. It also describes how to verify the SIP and SPA installation.
Chapter 6	Troubleshooting the Installation	Provides information for troubleshooting the installation of SIPs and SPAs. It also describes helpful debug commands and error messages.

Related Documentation

This section refers you to other documentation that also might be useful as you configure your Cisco xxxx series router. The documentation listed below is available online.

•Cisco 12000 Series Router SIP and SPA Software Configuration Guide (Cisco IOS)

•Cisco IOS Release Notes for Cisco 12000 Series Routers

•Regulatory Compliance and Safety Information for Cisco 12000 Series Routers

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.