Guest

Compare Models

This table shows the performance and functionality for the Cisco FirePOWER 8350, 8360, 8370, and 8390 Appliances.

MODEL 8350 8360 8370 8390
IPS throughput 15 Gbps 30 Gbps 45 Gbps 60 Gbps
Model throughput 30 Gbps 60 Gbps 90 Gbps 120 Gbps
Modular interfaces Up to 7 modules in any combination Up to 6 modules in any combination Up to 5 modules in any combination Up to 4 modules in any combination
monitoring interfaces (configurable bypass) (4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR*
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR*
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR
Monitoring interfaces (non-bypass) (4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
Management interfaces RJ45 RJ45 RJ45 RJ45
Management interface speed 10/100/1000 10/100/1000 10/100/1000 10/100/1000
Typical latency Less than 150 microseconds Less than 150 microseconds Less than 150 microseconds Less than 150 microseconds
Memory (RAM) 128 GB 256 GB 384 GB 512 GB
Lights-out management Yes Yes Yes Yes
Stackable Up to 3 stacking kits can be added for a total stack size of four – 60-Gbps IPS Up to 2 stacking kits can be added for a total stack size of four – 60-Gbps IPS 1 stacking kit can be added for a total stack size of four – see 8390 for details Fully stacked. No further expansion possible.
Cisco FirePOWER technology Yes Yes Yes Yes
Dual power supplies Yes Yes Yes Yes
Hard drives Solid state Solid state Solid state Solid state
Cooling fans 6 12 18 24

* The exact network performance experienced will vary depending on conditions outside of the control of Cisco, including the protocol mix and average packet size inspected. While IPS throughput is stated here, note that these appliances can also be deployed as next-generation firewall and advanced malware protection (AMP) devices.

This table shows the performance and functionality for the Cisco FirePOWER 8250, 8260, 8270, and 8290 Appliances.

MODEL 8250 8260 8270 8290
IPS throughput 10 Gbps 20 Gbps 30 Gbps 40 Gbps
Model throughput 20 Gbps 40 Gbps 60 Gbps 80 Gbps
Modular interfaces Up to 7 modules in any combination Up to 6 modules in any combination Up to 5 modules in any combination Up to 4 modules in any combination
Monitoring interfaces (configurable bypass) (4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR*
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR*
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR;
(2) 40-Gbps SR
Monitoring interfaces (non-bypass) (4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
Management interfaces RJ45 RJ45 RJ45 RJ45
Management interface speed 10/100/1000 10/100/1000 10/100/1000 10/100/1000
Typical latency Less than 150 microseconds Less than 150 microseconds Less than 150 microseconds Less than 150 microseconds
Memory (RAM) 48 GB 96 GB 144 GB 192 GB
Lights-out management Yes Yes Yes Yes
Stackable Up to 3 stacking kits can be added for a total stack size of four – 40-Gbps IPS Up to 2 stacking kits can be added for a total stack size of four – 40-Gbps IPS 1 stacking kit can be added for a total stack size of four – see 8290 for details Fully stacked. No further expansion possible.
Cisco FirePOWER technology Yes Yes Yes Yes
Dual power supplies Yes Yes Yes Yes
Hard drives Solid state Solid state Solid state Solid state
Cooling fans 6 12 18 24

* The exact network performance experienced will vary depending on conditions outside of the control of Cisco, including the protocol mix and average packet size inspected. While IPS throughput is stated here, please note that these appliances can also be deployed as next-generation firewall and advanced malware protection (AMP) devices.

This table shows the performance and functionality for Cisco FirePOWER 8100 Series Appliances.

MODEL 8120 8130 8140
IPS throughput 2 Gbps 4 Gbps 6 Gbps
Model throughput 4 Gbps 8 Gbps 10 Gbps
Modular Interfaces Yes – up to 3 modules in any combination Yes – up to 3 modules in any combination Yes – up to 3 modules in any combination
Monitoring interfaces (configurable bypass) (4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(2) 10-Gbps SR;
(2) 10-Gbps LR
Monitoring interfaces (non-bypass) (4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
(4) 1-Gbps copper;
(4) 1-Gbps fiber;
(4) 10-Gbps SR;
(4) 10-Gbps LR
Management interfaces RJ45 RJ45 RJ45
Management interface speed 10/100/1000 10/100/1000 10/100/1000
Typical latency Less than 150 microseconds Less than 150 microseconds Less than 150 microseconds
Memory (RAM) 24 GB 24 GB 24 GB
Lights-out management Yes Yes Yes
Stackable No No 1 stacking kit can be added for a total stack size of two – 12-Gbps IPS
Cisco FirePOWER technology Yes Yes Yes
Dual power supplies Yes Yes Yes
Hard drives Solid state Solid state Solid state
Cooling fans 10 10 10

* The exact network performance experienced will vary depending on conditions outside of the control of Cisco, including the protocol mix and average packet size inspected. While IPS throughput is stated here, please note that these appliances can also be deployed as next-generation firewall and advanced malware protection (AMP) devices.