The following table is a quick reference to all the functions available via the in call menu when the conference is hosted on a Cisco TelePresence MCU, running version 4.3 (or later) of the Cisco TelePresence MCU application.
Function |
Numeric sequence |
Menu sequence |
Request/release the floor (for my use) |
*11 |
My actions > Request floor
My Actions > Release floor
|
Mute/unmute my audio |
*12 |
My actions > Mute my audio
My actions > Unmute my audio
|
Stop/start my video |
*13 |
My actions > Stop my video
My actions > Start my video
|
Return to the auto attendant |
*14
|
My actions > Request floor
|
Change layout |
*15 , cycle through layouts (8 or 2) or focus participants (4 or 6) |
My actions > Change layout > Next/Previous layout view
My actions > Change layout > Focus on next/previous participant
|
Change/remove border |
*191
|
My actions > More actions > Increase border
My actions > More actions > Remove border
|
Clear text chat |
*192 |
My actions > More actions > Clear text chat
|
Enable/disable widescreen mode |
*193
|
My actions > More actions > Widescreen mode (off)
My actions > More actions > Widescreen mode (on)
|
Show the participant list |
*2 |
Participants |
Assign the floor to another participant |
*2 , select participant, 1 |
Participants > <name> > Assign floor
|
Mute/unmute another participant's audio |
*2 , select participant, 2 |
Participants > <name> > Mute audio
Participants > <name> > Unmute audio
|
Stop/start another participant's video |
*2 , select participant, 3 |
Participants > <name> > Stop video
Participants > <name> > Start video
|
Send a keypad sequence to another participant |
*2 , select participant, 4 , sequence, ## |
Participants > <name> > Keypad > <sequence> > More > Send
|
Increase another participant's audio level |
*2 , select participant, 5 |
Participants > <name> > Make louder
|
Decrease another participant's audio level |
*2 , select participant, 6 |
Participants > <name> > Make quieter
|
Enable/Disable AGC for another participant |
*2 , select participant, 7 |
Participants > <name> > Enable AGC
Participants > <name> > Disable AGC
|
Disconnect another participant |
*2 , select participant, 8 |
Participants > <name> > Disconnect this endpoint
|
Mute all other participants' audio |
*31 |
Conference actions > Mute others' audio
|
Unmute all other participants' audio |
*32 |
Conference actions > Unmute others' audio
|
Lock/unlock the conference |
*33
|
Conference actions > Lock conference
Conference actions > Unlock conference
|
Release the floor (from whomever currently holds it) |
*34 |
Conference actions > Release floor
|
Disconnect all participants |
*351
|
Conference actions > Disconnect all > Disconnect all
|
Add a participant |
*36 , enter address, ## |
Conference actions > Add participant > <address> > More > Call
|
Add/change/clear the chair PIN |
*41
|
Conference settings > Add PIN
Conference settings > Change PIN
|
Add/change/clear the guest PIN |
*42
|
Conference settings > Add guest PIN
Conference settings > Change guest PIN
|
Mute/unmute my audio |
*6 |
Mute audio
Unmute audio
|