Guest

Cisco Nexus 7000 Series Switches

Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option Data Sheet

  • Viewing Options

  • PDF (570.2 KB)
  • Feedback

Product Overview

The Cisco Nexus® 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option (referred to here as the Cisco Nexus 7000 M2-Series module) is a highly scalable, high-performance module offering outstanding flexibility and full-featured, non-blocking 10 Gigabit Ethernet performance on each port. The Cisco Nexus 7000 M2-Series module (Figure 1) facilitates the deployment of high-density, high-bandwidth, scalable network architecture, especially in large network cores and in service provider and Internet peering environments.

Figure 1. Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option

The Cisco Nexus 7000 Series Switches provide the foundation of the Cisco® Unified Fabric. They are a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks. The fabric architecture scales beyond 15 terabits per second (Tbps), and is designed to support high-density 40 and 100 Gigabit Ethernet deployments. To meet the requirements of the most mission-critical network environments, the switches deliver continuous system operations and virtualized services. The Cisco Nexus 7000 Series is powered by the proven Cisco NX-OS Software operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability and serviceability. The software’s innovative unified fabric design is purpose-built to support consolidation of IP and storage networks on a single lossless Ethernet fabric.

Features and Benefits

The Cisco Nexus 7000 M2-Series module offers outstanding flexibility and full-featured, non-blocking performance on each port. The module enables the deployment of high-density, high-speed, scalable data center architecture. Up to 384 non-blocking 10 Gigabit Ethernet ports are supported in a single Cisco Nexus 7000 18-Slot Switch chassis. Populating the Cisco Nexus 7000 10-Slot and 9-Slot Switch chassis with this module delivers, respectively, up to 192 and 168 ports of 10 Gigabit Ethernet in a single chassis (Table 1).

Table 1. Non-blocking 10 Gigabit Ethernet Port Density on Cisco Nexus 7000 Series Platform

Cisco Nexus 7000 Series Chassis

Non-blocking 10 Gigabit Ethernet Ports

Cisco Nexus 7000 18-Slot Switch

384

Cisco Nexus 7000 10-Slot Switch

192

Cisco Nexus 7000 9-Slot Switch

168

Cisco Nexus 7000 4-Slot Switch

48

The Cisco Nexus 7000 M2-Series module has a number of essential features that provide flexible deployment and support for environments requiring the highest performance and comprehensive features. With an optional Scalable Feature License, the module can operate in the enhanced XL mode, which enables use of the full forwarding table, essential for large-scale deployments such as Internet peering environments. This larger forwarding table can support multiple copies of the full Internet route table for use in Internet-facing deployments with Virtual Routing and Forwarding (VRF) and Virtual Device Context (VDC) support. The capability to operate in either non-XL or XL mode makes this module extremely versatile and flexible for many types of networking environments, without requiring a hardware module change or upgrade, and delivers a lower total cost of ownership (TCO). Table 2 lists the performance specifications for the Cisco Nexus 7000 M2-Series module operating in non-XL and XL modes.

Table 2. Performance Specifications for Non-XL and XL Mode Operation

Item

Non-XL Mode

XL Mode (with Scalable Feature License)

MAC Entries

128K

128K

IPv4 Routes

128K

Up to 1M*

IPv6 Routes

64K

Up to 350K*

NetFlow Entries

512K

512K

Access Control List (ACL)

64K

128K

* Actual limit depends on prefix distribution

The Cisco Nexus 7000 M2-Series module contains two integrated forwarding engines capable of delivering up to 120 million packets per second (Mpps) of Layer 2 and Layer 3 IPv4 unicast forwarding or 60 Mpps of IPv6 unicast forwarding across all ports of a single I/O module. The distributed architecture, with the forwarding engine integrated into each module, scales the forwarding performance of the chassis linearly by the number of I/O modules employed. The 18-slot chassis with 16 Cisco Nexus 7000 M2-Series modules can deliver up to 1.92 billion packets per second (Bpps) of IPv4 unicast forwarding or 960 Mpps of IPv6 unicast forwarding. Multicast forwarding is built into the I/O module, performing egress replication. The integrated forwarding engines also deliver ACL filtering, marking, rate limiting, and NetFlow with no degradation of performance. Powerful ACL processing supports up to 128K entries per module, where entries can address Layer 2, 3, and 4 fields in addition to the Cisco metadata fields that employ Security Group Tags (SGTs).

The Cisco Nexus 7000 M2-Series module offers exceptional security with integrated hardware support for Cisco TrustSec® technology, including line-rate data confidentiality, data integrity, and ACL processing for SGTs. Data confidentiality and integrity conform to the IEEE MAC security standard (IEEE 802.1AE [MACsec]). All ports on the module support the Advanced Encryption Standard (AES) cipher, using a 128-bit key. New security ACLs are enhanced through hardware support for Cisco metadata headers capable of carrying SGTs. Security group ACLs (SGACLs) use SGT information to provide hardware-based enforcement of security policies, removing dependencies on IP addresses, and thus improving scalability and simplifying manageability.

The Cisco Nexus 7000 M2-Series module buffers data in Virtual Output Queues (VOQ) before the data flows to the fabric. The data flow is controlled by a central arbiter on the supervisor module, using a credit-based buffer design. This architecture offers a lossless fabric that delivers quality of service (QoS) and fairness across all ports, even during congestion.

The comprehensive feature set of the Cisco Nexus 7000 M2-Series module includes classis Layer 2 and Layer 3 forwarding, with the robust feature set offered by Cisco NX-OS Software: a modular multitasking and multithreaded operating system built with high availability, granular fault management, resiliency, and nondisruptive serviceability at its foundation. This extremely comprehensive set of Layer 2 and Layer 3 functions makes this module ideal for data center networks, where density, performance, and continuous system operation are critical.

Table 3 summarizes the features and benefits of the Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option.

Table 3. Features and Benefits*

Feature

Benefit

XL mode

XL mode enables a larger forwarding table (up to 1 million IPv4 routes or up to 350,000 IPv6 routes), providing investment protection through increased system flexibility and ease of sparing.

High-density, full-featured 10 Gigabit

Ethernet module

Up to 384 10 Gi gabit Et hernet ports are s upport ed in t he Cisco N e x us 7000 18- Sl ot s witc h.
Up to 192 10 Gi gabit Et hernet ports are s upport ed in t he Cisco N e x us 7000 10- Sl ot s witc h.
Up to 168 10 Gi gabit Et hernet ports are s upport ed in t he Cisco N e x us 7000 9- Sl ot s witc h.
Up to 48 10 Gi gabit Et hernet ports are s upport ed in t he Cisco N e x us 7000 4- Sl ot s witc h.

Comprehensive Layer 2 and Layer 3 capabilities*

The comprehensive set of Layer 2 and Layer 3 functions makes this module ideal for data center networks.

VOQ with centralized arbitration

VOQ enables fairness when one or more destinations are congested and supports lossless unified fabric.

Load sharing across all fabric modules

Through its high-availability design, bandwidth is shared across all fabric modules simultaneously for optimal performance.

Distributed forwarding

Through its fully distributed data plane, the module offers high-performance parallel forwarding.

Multiprotocol Label Switching (MPLS)

Supports MPLS forwarding in hardware.

IEEE 1588 Precision Time Protocol (PTP)

The module supports PTP based on IEEE 1588.

Cisco Nexus 2000 Series Fabric Extenders

The Cisco Nexus 2000 Series Fabric Extenders are designed to simplify data center architectures and operations by dramatically reducing the points of management.

Integrated hardware support for Cisco TrustSec technology

Cisco TrustSec technology simplifies and scales access control by using SGTs and SGACLs, and delivers data confidentiality and data integrity on all ports, using the IEEE 802.1AE standard.

Online insertion and removal (OIR)

The module supports hot insertion and removal for continuous system operation.

Identification (ID) LED

Through the beacon feature, administrators can clearly identify the module for a service condition; ports on the I/O module can send beacons as well.

* Initial software releases may support a subset of the overall hardware capabilities. Refer to the Cisco Nexus 7000 Series NX-OS release notes for up-to-date software version information and feature support.

Product Specifications

Table 4 lists the product specifications for the Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option.

Table 4. Product Specifications

Item

Specifications

System

Product compatibility

Supported in all Cisco Ne xus 7000 Series chassis
Supported Fabric-1 or Fabric-2 fabric modules
Supported SUP1, SUP2 or SUP2E Supervisor modules

Software compatibility

Cisco NX-OS Software Release 6.1 or later (minimum requirement)

Memory

2 GB DRAM

Front-panel LEDs

St at us: G reen (operati onal ), red (f ault y ), or orange ( m odule booti ng)
Li n k: G reen (port enabl ed and c onnect ed), orange (port dis abl ed), bli n ki ng orange (f aulty port ), off (port enabl ed and not c onnect ed), or bli n ki ng green and orange in c onj uncti on with ID L ED bl ue (port fl agged f or i dentific ati on; beac on)
ID: Bl ue (operat or has fl agged t his c ard f or i dentific ati on; beac on) or off ( m odule not fl agged)

Programming interfaces

E xt ensi ble M ar k up Language ( X M L)
Sc ri pt able c o mm and-li ne i nt erf ace (C L I)
Cisco D ata C ent er N et w ork M anager (DCN M) GUI

Physical Interfaces

Connectivity

24 ports of 10 Gigabit Ethernet (Small Form-Factor Pluggable Plus [SFP+] optics modules)

Maximum port density

384 ports of 10 Gi gabit Et hernet f or 18-sl ot c hassis
192 ports of 10 Gi gabit Et hernet f or 10-sl ot c hassis
168 ports of 10 Gi gabit Et hernet f or 9-sl ot c hassis
48 ports of 10 Gi gabit Et hernet f or 4-sl ot c hassis

MAC security

All ports have built-in IEEE 802.1AE MAC security and an AES cipher with a 128-bit key (requires a software license to enable)

Queues per port

Ingress: 8 queues and 2 thresholds (RX: 8q2t)
Egress: 1 strict priority queue, 7 deficit-weighted round-robin (DWRR) queues, and 4 thresholds (TX: 1p7q4t)

Scheduler

DWRR and shaped round-robin (SRR)

Port buffers

I ngre ss: 5.21 MB per port
E gre ss: 5.21 MB per port

Jumbo frame support for bridged and routed packets

Up to 9216 bytes

Forwarding Engines

Performance

120 Mpps Layer 2 and Layer 3 IPv4 unicast and 60 Mpps IPv6 unicast

MAC address entries

128K

VLANs

16,384 bridge domains and 4096 simultaneous VLANs per VDC

IPv4 entries

128K (non- XL m ode)
1M ( XL m ode)

IPv6 entries

64K (non- XL m ode)
350K ( XL m ode)

ACLs

64K (non- XL m ode)
128K ( XL m ode)

Policers

16,000

Fabric Interface

Switch fabric interface

550 Gbps in each direction (1.1 Tbps full duplex) distributed across up to five Fabric-2 modules

230 Gbps in each direction (460 Gbps full duplex) distributed across up to five Fabric-1 modules

OIR

Online insertion and removal

Environmental

Physical dimensions

Occ upi es one I/O m odule sl ot in a Cisco N e x us 7000 S eri es c hassis
Di m ensi ons (H x W x D ): 1. 733 x 15.3 x 21.9 in, (4.4 x 38.9 x 55.6 c m)
W ei ght: 16.5 lb (7.5 kg)

Power consumption

T y pic al: 720 watts (W)
M a xi m u m: 795W

Environmental conditions

O perati ng t e m perat ure: 32 to 104ºF (0 to 40ºC)
O perati onal rel ative hu mi dit y: 5 to 90 %, nonc ondensi ng
St orage t e m perat ure: -40 to 158ºF (-40 to 70ºC)
St orage rel ative hu mi dit y: 5 to 95 %, nonc ondensi ng

Regulatory compliance

EMC - Emissions

47C FR P art 15 (C FR 47) Cl ass A
AS/N ZS C I SPR 22 Cl ass A
C I SPR 22 Cl ass A
EN 55022 Cl ass A
IC ES 003 Cl ass A
VCCI Cl ass A
EN 61000-3-2
EN 61000-3-3
KN 22 Cl ass A
CN S 13438 Cl ass A

EMC - Immunity

EN 55024
C I SPR 24
EN 300386
KN 24

Environmental standards

N EBS c rit eria l ev els
SR -3580 N EBS Lev el 3 (GR -63-COR E, iss ue 3, and GR -1089-COR E, iss ue 4)
T el ec o mm unic ati ons C arri er G roup ( TCG) C hec klist
ATT TP 76200 l ev el 3
ETSI 300 019-1-1, Cl ass 1.2 St orage
ETSI 300 019-1-2, Cl ass 2.3 T rans port ati on
ETSI 300 019-1-3, Cl ass 3.2 St ati onary Use

Safety

UL 60950-1 S ec ond E diti on
C AN/C SA -C 22.2 N o. 60950-1 S ec ond E diti on
EN 60950-1 S ec ond E diti on
I EC 60950-1 S ec ond E diti on
AS/N ZS 60950-1

Warranty

Cisco Nexus 7000 Series Switches come with the standard Cisco 1-year limited hardware warranty

Interface Distances

Table 5 summarizes the interfaces, cabling specifications, and distances of SFP+ optics supported by the Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option. Not all optics are supported in the first software release. Refer to the Cisco Nexus 7000 Series NX-OS Release Notes for up-to-date software version information and optics support details.

Table 5. 10 Gigabit Ethernet Interface Distances and Options1

10 Gigabit Ethernet SFP+ Part Number

Wavelength (nanometers)

Fiber and Cable Type

Core Size (microns)

Modal Bandwidth (MHz*km)2

Cable Distance3

SFP-10G-SR

850

Multimode fiber (MMF) (FDDI-grade)
MMF (OM1)
MMF (400/400)
MMF (OM2)
MMF (OM3)
MMF (OM4)
62.5
62.5
50.0
50.0
50.0
50.0
160
200
400
500
2000
4700
26m
33m
66m
82m
300m
400m

SFP-10G-LRM

1310

MMF 4
62.5
50.0
50.0
500
400
500
220m
100m
220m
Si ngl e- m ode fi ber ( SM F)
G.652

-

300m

SFP-10G-LR

1310

SMF
G. 652

-

10km

SFP-10G-ER

1550

SMF
G. 652

-

40km 5

SFP-10G-ZR

1530-1565

SMF
G. 652

-

80km

DWDM-SFP10G-xx.xx=

1530.33 - 1561.416

SMF

-

-

-

FET-10G

850

MMF (OM2)
MMF (OM3)
MMF (OM4)
50.0
50.0
50.0
500
2000
4700 (OM 4)
25m
100m
100m

SFP-H10GB- CU1M

-

T wi nax c abl e, passiv e, 30 A WG c able ass e m bly

-

-

1m

SFP-H10GB-CU1-5M

-

Twinax cable, passive, 30AWG cable assembly

-

-

1.5m

SFP-H10GB-CU2M

-

Twinax cable, passive, 30AWG cable assembly

-

-

2m

SFP-H10GB-CU2-5M

-

Twinax cable, passive, 30AWG cable assembly

-

-

2.5m

SFP-H10GB- CU3M

-

T wi nax c abl e, passiv e, 30 A WG c able ass e m bly

-

-

3m

SFP-H10GB- CU5M

-

T wi nax c abl e, passiv e, 24 A WG c able ass e m bly

-

-

5m

SFP-H10GB- ACU7M

-

T wi nax c abl e, activ e, 30 A WG c able ass e m bly

-

-

7m

SFP-H10GB- ACU10M

-

T wi nax c abl e, activ e, 28 A WG c able ass e m bly

-

-

10m

SFP-10G-AOC1M

-

Active Optical Cable assembly

-

-

1m

SFP-10G-AOC2M

-

Active Optical Cable assembly

-

-

2m

SFP-10G-AOC3M

-

Active Optical Cable assembly

-

-

3m

SFP-10G-AOC5M

-

Active Optical Cable assembly

-

-

5m

SFP-10G-AOC7M

-

Active Optical Cable assembly

-

-

7m

SFP-10G-AOC10M

-

Active Optical Cable assembly

-

-

10m
1 See the Cisco 10GBASE SFP+ Modules Data Sheet for additional information: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html.
2 Bandwidth is specified at transmission wavelength.
3 Minimum cabling distance for -SR, -LRM, -LR, and -ER modules is 2m, according to IEEE 802.3ae.
4 A mode-conditioning patch is required for use over legacy multimode fiber types such as FDDI-grade, OM1, and OM2. Please refer to the product bulletin at http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.
5 Links longer than 30 km are considered engineered links according to IEEE 802.3ae.
6 40 different wavelengths are offered. See the Cisco 10GBASE Dense Wavelength-Division Multiplexing SFP+ Modules Data Sheet for additional product numbers and information: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/data_sheet_c78-711186.html.

Ordering Information

To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 6 provides ordering information.

Table 6. Ordering Information

Product Name

Part Number

Cisco Nexus 7000 M2-Series 24 Port 10 GbE with XL Option (req. SFP+)

N7K-M224XP-23L

Cisco Nexus 7004 Scalable Feature License

N7K-C7004-XL

Cisco Nexus 7009 Scalable Feature License

N7K-C7009-XL

Cisco Nexus 7010 Scalable Feature License

N7K-C7010-XL

Cisco Nexus 7018 Scalable Feature License

N7K-C7018-XL

Service and Support

Cisco offers a wide range of services to help accelerate your success in deploying and optimizing Cisco Nexus 7000 Series Switches in your data center. Our innovative services are delivered through a unique combination of people, processes, tools, and partners and are focused on helping you increase operating efficiency and improve your data center network. Cisco Advanced Services uses an architecture-led approach to help you align your data center infrastructure with your business goals and provide long-term value. Cisco SMARTnet® Service helps you resolve mission-critical problems with direct access at any time to Cisco network experts and award-winning resources. With this service, you can take advantage of the Cisco Smart Call Home service capability, which

offers proactive diagnostics and real-time alerts on your Cisco Nexus 7000 Series Switches. Spanning the entire network lifecycle, Cisco Services helps increase investment protection, optimize network operations, support migration, and strengthen your IT expertise. For more information about Cisco Data Center Services, visit http://www.cisco.com/go/dcservices.

For More Information

For more information about the Cisco Nexus 7000 Series, visit the product homepage at http://www.cisco.com/go/nexus7000 or contact your local account representative.