This document provides installation instructions for Unified CCE 12.6(2) ES99. It also contains a list of Unified CCE issues resolved by this engineering special. Review all installation information before installing the product. Failure to install this engineering special as described can result in inconsistent Unified CCE behaviour.
This document contains these sections:
In the Product
Alert Tool, you can set up profiles to receive email notification of new
Field Notices, Product Alerts, or End of Sale information for your selected
products.
The Product
Alert Tool is available at https://www.cisco.com/cisco/support/notifications.html.
The
Engineering Special (ES) is a cumulative update applied at the Unified Contact
Center Enterprise (CCE) server level. Each ES includes all features, security
patches, and resolved caveats from the base release, tailored to specific
server roles within the system. The ES packages are categorized as follows:
Each ES is cumulative within its specific category. These ES packages are released quarterly, but only if updates are available for that category. If no changes are required for a category in a given quarter, an ES for that category will not be issued.
To ensure the latest patches are applied:
This section lists the Unified CCE components on which you can and cannot install this Engineering Special.
You can install Unified CCE 12.6(2) ES99 on these Unified CCE components:
Do not install this engineering special on any components other than the following:
Important
Notice: End of Software Maintenance for UCCE, PCCE, and CVP Versions 12.5 and
12.6
Software maintenance for Cisco Unified Contact Center
Enterprise (UCCE), Packaged Contact Center Enterprise
(PCCE), and Customer Voice Portal (CVP) versions 12.5 and 12.6 will officially
end in December 2026. After this date, no further software updates, security
patches, or bug fixes will be provided.
For full details, please refer to the official Cisco End-of-Life announcement: End-of-Sale and
End-of-Life Announcement for Cisco Version 12.5/12.6 of On-Premises Contact Center Applications (UCCE, PCCE, UCCX, CVP) and associated
On-Premises software and licenses - Cisco
Action Required: To maintain a secure and fully supported environment
and to take advantage of the latest features, including enhanced AI
capabilities, we strongly recommend upgrading to version 15.0.
You can use graceful shutdown procedure to install this ES with Zero down time. To avail this Zero Down Time feature, ES68 in Rogger/Router server, ES69 in Peripheral Gateway, ES70 in Admin Workstation/Distributor servers is a prerequisite to be present in the system.
To
install the Unified CCE 12.6(2) ES99 with maintenance mode (Zero Downtime),
follow the steps:
For more information about graceful shutdown, please refer to Administration guide for unified contact centre enterprise release -https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_12_6_2/administration/guide/administration-guide-for-cisco-unified-contact-center-enterprise-release-1262/ucce_m_graceful-shutdown.html?bookSearch=true
To Uninstall the Unified CCE
12.6(2) ES99 with maintenance mode (Zero Downtime), follow the steps:
Note: Remove patches in the reverse order of their installation. For example, if you installed patches 3, then 5, then 10 for a product, you must uninstall patches 10, 5, and 3, in that order, to remove the patches from that product.
Updated
Features
This section provides a list of significant Unified CCE defects resolved by this engineering special. It contains these subsections:
· Resolved Caveats in Unified CCE 12.6(2) ES99
This section lists caveats specifically resolved by Unified CCE 12.6(2) ES99.
Caveats in this section are ordered by UNIFIED CCE component, severity, and
then identifier.
|
Identifier |
Severity |
Component |
Headline |
ES dependency |
|
CSCwo76647 |
2 |
outbound |
Dialer does not go active after private network failure. |
ES 98 on Router |
|
CSCwo38774 |
2 |
outbound |
Campaign
manager crashed with 0 kb minidump during the load import/call flows
|
ES 98 on Router |
|
CSCwi84675 |
3 |
opc |
Agent
PG OPC assesrts while executing get_config
command in the RTTEST |
|
|
|
|
|
|
|
This
Engineering Special will include the features, resolved caveats from previous
Engineering Special released for components on the PG Node. If a prior ES has a
dependency on other components of CCE, install the respective ES. Please refer
to the Release Notes of previous Quarterly ES here: https://www.cisco.com/web/software/280840583/172661/Release_Document_1.html
Note: You can view more
information on and track individual Unified CCE defects using the Cisco Bug
Search tool, located at: https://bst.cloudapps.cisco.com/bugsearch/search?null
You can access current Cisco documentation on the Support pages at the following sites:
To provide comments about this document, send an email message to the following address:
contactcenterproducts_docfeedback@cisco.com
We appreciate your comments.
Cisco.com is a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC site.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. You can also resolve technical issues with online technical support and download software packages. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
The Cisco TAC site is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to https://www.cisco.com/c/en/us/support/index.html.
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC site to quickly find answers to your questions.
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following site: https://mycase.cloudapps.cisco.com/create/start/
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following sites:
P1 and P2 level problems are defined as follows: