Table Of Contents
Installing a Cisco Unity System
Task List for a Component System
Task List for a Baseline System
Cisco Unity Activation Code
Registering Cisco Unity
Installing Voice Cards
Setting Up the Cisco Unity Server
Starting the Cisco Unity Server and Logging On to Windows (Baseline System Only)
Uninstalling Outlook 2000 (Baseline System Only)
Installing Windows 2000 Server (Component System Only)
Installing Additional Windows 2000 Languages
Assigning a Static IP Address
Verifying the IP Address
Installing the USB Key Driver and Attaching the USB System Key (Component System Only)
Installing Active Directory or Adding the Cisco Unity Server to an Existing Domain
Active Directory
Existing Domain
Installing SQL Server 2000 or MSDE 2000
SQL Server 2000
MSDE 2000
Installing Internet Explorer
Installing Message Queuing 2.0
Installing NNTP Service (Exchange 2000 Only)
Installing Exchange, Including Administration Software (Selected Configurations Only)
Exchange 2000
Exchange Server 5.5
Installing Exchange Administration Software Only
Exchange 2000
Exchange 5.5
Updating the Active Directory Schema (Exchange 2000 only)
Installing Other Software
Symantec pcAnywhere (Required)
Trend Micro ScanMail
VERITAS Backup Exec
RSA SecurID
Adobe Acrobat Reader
Creating Organizational Units and a Mailbox Store (Exchange 2000 Only)
Choosing the Windows Account Used for Installing Cisco Unity Software
Active Directory Permissions Required
User Rights Required
Exchange Permissions Required If the Organization Contains Only Exchange 2000 Servers
Exchange Permissions Required If the Organization Contains Only Exchange 5.5 Servers
Exchange Permissions Required If the Organization Contains Both Exchange 2000 and Exchange 5.5 Servers
Active Directory Permissions Required If the Account Is Not a Member of the Enterprise Admins Group
Installing Cisco Unity Software
Cisco Unity Setup
Directory Connection
Exchange 2000
Exchange 5.5
Configuring a System That Includes Exchange 5.5 and Exchange 2000 Servers (Selected Systems Only)
Reinstalling Windows 2000 Service Pack 2
Customizing the Cisco Unity System
Installing a Cisco Unity System
Your installation tasks depend on whether you are installing Cisco Unity on a component system or on a baseline system. Use the task list for your system type to install the Cisco Unity system correctly.
This chapter contains the following sections:
•
Task List for a Component System
•Task List for a Baseline System
•Cisco Unity Activation Code
•Installing Voice Cards
•Setting Up the Cisco Unity Server
•Starting the Cisco Unity Server and Logging On to Windows (Baseline System Only)
•Uninstalling Outlook 2000 (Baseline System Only)
•Installing Windows 2000 Server (Component System Only)
•Installing Additional Windows 2000 Languages
•Assigning a Static IP Address
•Verifying the IP Address
•Installing the USB Key Driver and Attaching the USB System Key (Component System Only)
•Installing Active Directory or Adding the Cisco Unity Server to an Existing Domain
•Installing SQL Server 2000 or MSDE 2000
•Installing Internet Explorer
•Installing Message Queuing 2.0
•Installing NNTP Service (Exchange 2000 Only)
•Installing Exchange, Including Administration Software (Selected Configurations Only)
•Installing Exchange Administration Software Only
•Updating the Active Directory Schema (Exchange 2000 only)
•Installing Other Software
•Creating Organizational Units and a Mailbox Store (Exchange 2000 Only)
•Choosing the Windows Account Used for Installing Cisco Unity Software
•Installing Cisco Unity Software
•Configuring a System That Includes Exchange 5.5 and Exchange 2000 Servers (Selected Systems Only)
•Reinstalling Windows 2000 Service Pack 2
•Customizing the Cisco Unity System
Task List for a Component System
Some tasks apply only to particular configuration types, and are noted as such. If a task does not apply to your situation, skip it.
1. Verify system requirements for the Cisco Unity 3.0 system. Refer to Cisco Unity 3.0 System Requirements, and Supported Hardware and Software at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/sysreq/30_sysrq.htm.
2. Confirm that a Cisco Unity activation code is available (the code is provided when the software is registered). If the Information Services manager has not already registered Cisco Unity, do so now. See the "Cisco Unity Activation Code" section.
3. Install voice cards (traditional phone systems only). See the "Installing Voice Cards" section.
4. Set up the Cisco Unity server. See the "Setting Up the Cisco Unity Server" section.
5. Install Windows 2000 Server. See the "Installing Windows 2000 Server (Component System Only)" section.
6. Install Windows 2000 Multilanguage User Interface, if applicable. See the "Installing Additional Windows 2000 Languages" section.
7. All configurations except Voice Messaging Only: Assign a static IP address, if applicable and if you did not do so while installing Windows 2000 Server. See the "Assigning a Static IP Address" section.
8. All configurations except Voice Messaging Only: Confirm that the server is getting an IP address. See the "Verifying the IP Address" section.
9. If the system key is a USB key, install the driver for the key and attach the USB key to the server. See the "Installing the USB Key Driver and Attaching the USB System Key (Component System Only)" section.
10. Add the Cisco Unity server to an existing domain, or install Active Directory. See the "Installing Active Directory or Adding the Cisco Unity Server to an Existing Domain" section.
11. Install Microsoft SQL Server 2000 or MSDE 2000. See the "Installing SQL Server 2000 or MSDE 2000" section.
12. Install Internet Explorer 5.5. See the "Installing Internet Explorer" section.
13. Install Message Queuing 2.0. See the "Installing Message Queuing 2.0" section.
14. Install NNTP Service, if the system is using Exchange 2000. See the "Installing NNTP Service (Exchange 2000 Only)" section.
15. Install Exchange 2000 Server or Exchange Server 5.5, or install the corresponding administration software. See the applicable section:
•"Installing Exchange, Including Administration Software (Selected Configurations Only)" section.
•"Installing Exchange Administration Software Only" section.
16. Update the Active Directory schema, if the system is using Exchange 2000. See the "Updating the Active Directory Schema (Exchange 2000 only)" section.
17. Install other software. See the "Installing Other Software" section.
18. If applicable, create Active Directory organizational units for users and distribution lists, and a mailbox store, if the system is using Exchange 2000. See the "Creating Organizational Units and a Mailbox Store (Exchange 2000 Only)" section.
19. Choose the Windows account that you will use to install Cisco Unity. See the "Choosing the Windows Account Used for Installing Cisco Unity Software" section.
20. Install Cisco Unity. See the "Installing Cisco Unity Software" section.
21. Unified Messaging configurations only, if messages for Cisco Unity subscribers will be stored on both Exchange 5.5 and Exchange 2000 servers, and if the Active Directory Connector uses a one-way connection agreement from Exchange 5.5 to Windows 2000: Configure the system for Exchange 5.5 and Exchange 2000. See the "Configuring a System That Includes Exchange 5.5 and Exchange 2000 Servers (Selected Systems Only)" section.
22. Reinstall Windows 2000 Server Service Pack 2. See the "Reinstalling Windows 2000 Service Pack 2" section.
23. Create an emergency repair disk. Refer to Windows 2000 Help.
24. Integrate Cisco Unity and the phone system. Refer to the Cisco Unity integration guide for your phone system. Cisco Unity integration guides are available on the Cisco Unity Documentation compact disc and on Cisco.com at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/index.htm.
25. Customize the Cisco Unity system. See the "Customizing the Cisco Unity System" section.
Task List for a Baseline System
Some tasks apply only to particular configuration types, and are noted as such. If a task does not apply to your situation, skip it.
1. Verify system requirements for the Cisco Unity 3.0 system. Refer to Cisco Unity 3.0 System Requirements, and Supported Hardware and Software at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/sysreq/30_sysrq.htm.
2. Confirm that a Cisco Unity activation code is available (the code is provided when the software is registered). If the Information Services manager has not already registered Cisco Unity, do so now. See the "Cisco Unity Activation Code" section.
3. Install voice cards (traditional phone systems only). See the "Installing Voice Cards" section.
4. Set up the Cisco Unity server. See the "Setting Up the Cisco Unity Server" section.
5. Start the server, and log on to Windows 2000. See the "Starting the Cisco Unity Server and Logging On to Windows (Baseline System Only)" section.
6. Uninstall Outlook 2000. See the "Uninstalling Outlook 2000 (Baseline System Only)" section.
7. Install Windows 2000 Multilanguage User Interface, if applicable. See the "Installing Additional Windows 2000 Languages" section.
8. All configurations except Voice Messaging Only: Assign a static IP address, if applicable. See the "Assigning a Static IP Address" section.
9. All configurations except Voice Messaging Only: Confirm that the server is getting an IP address. See the "Verifying the IP Address" section.
10. Add the Cisco Unity server to an existing domain, or install Active Directory. See the "Installing Active Directory or Adding the Cisco Unity Server to an Existing Domain" section.
11. Install Microsoft SQL Server 2000 or MSDE 2000. See the "Installing SQL Server 2000 or MSDE 2000" section.
12. Install Exchange 2000 Server or Exchange Server 5.5, or install the corresponding administration software. See the applicable section:
•"Installing Exchange, Including Administration Software (Selected Configurations Only)" section.
•"Installing Exchange Administration Software Only" section.
13. Update the Active Directory schema, if the system is using Exchange 2000. See the "Updating the Active Directory Schema (Exchange 2000 only)" section.
14. Install other software. See the "Installing Other Software" section.
15. If applicable, create Active Directory organizational units for users and distribution lists, and a mailbox store, if the system is using Exchange 2000. See the "Creating Organizational Units and a Mailbox Store (Exchange 2000 Only)" section.
16. Choose the Windows account that you will use to install Cisco Unity. See the "Choosing the Windows Account Used for Installing Cisco Unity Software" section.
17. Install Cisco Unity. See the "Installing Cisco Unity Software" section.
18. Unified Messaging configurations only, if messages for Cisco Unity subscribers will be stored on both Exchange 5.5 and Exchange 2000 servers, and if the Active Directory Connector uses a one-way connection agreement from Exchange 5.5 to Windows 2000: Configure the system for Exchange 5.5 and Exchange 2000. See the "Configuring a System That Includes Exchange 5.5 and Exchange 2000 Servers (Selected Systems Only)" section.
19. Reinstall Windows 2000 Server Service Pack 2. See the "Reinstalling Windows 2000 Service Pack 2" section.
20. Create an emergency repair disk. Refer to Windows 2000 Help.
21. Integrate Cisco Unity and the phone system. Refer to the Cisco Unity integration guide for your phone system. Cisco Unity integration guides are available on the Cisco Unity Documentation compact disc and on Cisco.com at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/index.htm.
22. Customize the Cisco Unity system. See the "Customizing the Cisco Unity System" section.
Cisco Unity Activation Code
You must have an activation code for the system key to complete the Cisco Unity installation or upgrade. Cisco sends an e-mail with the code—which activates license settings—once the Cisco Unity software has been registered on Cisco.com.
A registration notice shipped with Cisco Unity contains instructions for registering the software. The resulting e-mail from Cisco instructs the recipient to save the code to a blank disk labeled "Cisco Unity Activation Code" and to store the disk with the Cisco Unity software and documentation.
If the Cisco Unity software has not been registered, do so immediately because it can take up to one business day to receive the activation code for the system key. See the following "Registering Cisco Unity" section for instructions on registering the software or on getting another copy of the activation code, if it has been misplaced.
The Cisco Unity installation instructions later in this chapter explain when to use the activation code.
Registering Cisco Unity
The Cisco Unity system key is shipped with a minimal number of settings. To activate the system key so that it includes the settings purchased by the customer, the Cisco Unity software must be registered on Cisco.com.
Within one business day of registration, you will receive an e-mail with a Cisco Unity activation code.
Registrations are processed only during regular business hours.
Caution You cannot complete the installation without a Cisco Unity activation code.
To register Cisco Unity on Cisco.com
Step 1 Browse to the applicable software registration site (URLs are case sensitive):
Step 2 Enter the requested information and submit the form. Within one business day of registration, you will receive an e-mail with the Cisco Unity activation code.
Step 3 Store this notice with the Cisco Unity software and documentation.
If the Cisco Unity activation code is misplaced or lost, it can take up to one business day to get another copy.
To get another copy of the activation code
Step 1 Call Cisco TAC:
Step 2 You will need to provide information to verify Cisco Unity ownership—for example, the purchase order number, the serial number on the system key, or the product authorization key in the Cisco Unity compact disc wallet.
Installing Voice Cards
Do this section if you are:
•Installing a new Cisco Unity system.
•Upgrading an existing system from version 2.x to version 3.0 and adding, changing, or removing voice cards.
For information on adding, changing, or removing voice cards in an existing Cisco Unity 3.0 system, see Chapter 4, "Upgrading a Cisco Unity 3.0 System."
Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Warning Before opening the chassis, disconnect the telephone-network cables to avoid contact with telephone-network voltages.
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning This equipment is to be installed and maintained by service personnel only as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel.
Warning The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed. Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and electrical hazards.
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place.
To install voice cards
Step 1 If the server is already on, exit the Cisco Unity software and then shut down the server. For more information, see Appendix B, "Exiting and Starting the Cisco Unity Software and Server."
Step 2 Attach an antistatic wrist strap, and ground yourself to the Cisco Unity server.
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.
Step 3 Set the switches and jumpers on each card. See Appendix A, "Voice Cards," for information on hardware settings for your cards.
Some cards include hardware settings that indicate which card is first, which is second, and so on. If you are installing more than one card of the same model, keep the cards in order so you can install them in the correct order in Step 4.
If you are installing Dialogic D/120JCT-EURO or D/240PCI-T1 cards, do not do the procedure under "Software Settings" in Appendix A, "Voice Cards," at this time. The Cisco Unity Installation Guide alerts you when to do the procedure later in the installation.
Step 4 Insert each card firmly into its slot, and fasten each card to the computer backplate with a screw.
If you are installing more than one card of the same model, and if the cards include a hardware setting that indicates which card is first, second, and so on, install the cards in the order specified by the hardware settings.
If you are installing cards of different models in the same server, install cards of the same model adjacent to one another.
PCI cards can be put into either 32-bit or 64-bit PCI slots.
All cards with H.100 bus (also known as CT bus) connectors must be installed in the same server. If all the cards do not fit in the Cisco Unity server, then you must install all of them in an expansion chassis.
Step 5 If you are installing multiple voice cards that have H.100 bus connectors, cable the cards together. On each card, connect the cable so the red stripe on the cable corresponds with pin 1 on the card connector. Confirm that the connectors are firmly seated.
Caution If you do not cable cards together as required, the voice card software will not start, and Cisco Unity will not answer calls.
If the cable has more connectors than the server has voice cards, use the first and last connectors, and leave unused connectors in the middle of the cable. If the end of a cable is allowed to dangle loose, it can act as a radio antenna and pick up noise from the bus.
If you are cabling three or more cards together, connect the first connector on the cable to the first card, the second connector to the second card, and so on.
Setting Up the Cisco Unity Server
We recommend that you connect the Cisco Unity server to a dedicated uninterruptible power supply.
The server for a Cisco Unity baseline system is configured for a specific hardware setup. Do not add or change any hardware on the server, except to add voice cards or memory.
To set up the server
Step 1 Place the server near the phone system and a network connection, in a dry, cool area that is free of dust.
Step 2 Attach peripheral devices and the network cable, if applicable, to the server.
If you are setting up a Cisco MCS-7825 server (Compaq DL-320) and connecting it to the network, use only the bottom RJ-45 Ethernet receptacle.
Step 3 If the system key is a parallel key, attach the system key to the server. If you are connecting a printer to the server, plug the printer into the parallel port on the key.
If the system key is a USB key and you are setting up a baseline system, plug the key into any USB port now.
If the system key is a USB key and you are setting up a component system, wait to attach the key until after you have installed the USB key driver, later in this chapter.
Step 4 Connect the phone system to the server as described in the Cisco Unity integration guide for your phone system.
For pinout information, see the section for your voice card in Appendix A, "Voice Cards."
Step 5 If you are installing the Cisco Unity system outside the United States, if the server contains voice cards, and if the cards came with a ferrite clamp, attach the clamp around the analog phone lines as close to the server as possible.
Starting the Cisco Unity Server and Logging On to Windows (Baseline System Only)
To start the Cisco Unity server and log on to Windows
Step 1 Turn on the Cisco Unity server.
Step 2 If a Factory Condition screen appears, press C to continue, and press A to accept the license agreements. The Cisco Unity server restarts.
Step 3 In the Windows 2000 Setup wizard, click Next.
Step 4 Follow the on-screen prompts until the Licensing Modes dialog box appears.
Step 5 Click Per Seat.
Step 6 Click Next.
Step 7 Follow the on-screen prompts until the Computer Name and Administrator Password dialog box appears.
Step 8 Change the computer name, if applicable, and enter and confirm a password for the default Administrator account. The default password for a baseline system is a blank password.
Step 9 Follow the on-screen prompts until the Network Settings dialog box appears.
Step 10 Click Typical Settings.
Step 11 Click Next.
Step 12 In the Workgroup or Computer Domain dialog box, click No, This Computer Is Not on a Network, or Is on a Network Without a Domain.
In addition, if the Workgroup or Computer Domain box is empty, enter a workgroup name. The name you enter now is not important. You will join a domain or make the Cisco Unity server a domain controller in a later procedure, so the Cisco Unity server will no longer be in a workgroup.
Step 13 Click Next.
Step 14 Click Restart Now, and the server automatically restarts several times.
Step 15 When the Welcome to Windows dialog box appears, press Ctrl-Alt-Delete.
Step 16 In the Log On to Windows dialog box, enter the password for the Administrator account in the Password box. This is the password that you specified in Step 8.
Step 17 Click OK.
Step 18 If the server does not contain voice cards, skip to Step 25.
If the server contains voice cards, the Welcome to the Found New Hardware wizard appears. Click Next.
Step 19 Click Search for a Suitable Driver for My Device (Recommended).
Step 20 Click Next.
Step 21 Check the Floppy Disk Drives and CD-ROM Drives check boxes, and click Next.
Step 22 Click Disable the Device.
Step 23 Click Finish.
Step 24 If the server contains more than one voice card, repeat Steps 18 through 23 for each voice card.
Step 25 In the Windows 2000 Configure Your Server dialog box, click I Will Configure This Server Later.
Step 26 Click Next.
Step 27 Uncheck the Show This Screen at Startup check box.
Step 28 Close the window.
Uninstalling Outlook 2000 (Baseline System Only)
Outlook 2000 is incompatible with Exchange 5.5 and Exchange 2000, and must be removed from a Cisco Unity baseline system. (Microsoft's announcement that Outlook 2000 was not supported on servers with Exchange 5.5 or Exchange 2000 installed came after the software environment for a Cisco Unity baseline system was created.)
To uninstall Outlook 2000
Step 1 On the Windows Start menu, click Settings > Control Panel > Add/Remove Programs.
Step 2 Remove Outlook 2000.
Installing Windows 2000 Server (Component System Only)
The following three procedures apply to installing Windows 2000 Server. However, the first procedure—making Windows 2000 Setup disks—applies only if the CD-ROM drive in the Cisco Unity server is not bootable. Do the first procedure, if necessary, before you install Windows 2000 Server.
The second and third procedures describe how to install Windows 2000 by using the compact discs that are currently shipping with Cisco Unity. Do the procedures in the order listed.
If you are using different compact discs, the installation process may differ.
For more detailed information on individual steps in the installation process, refer to the Windows 2000 documentation included with the software.
If you want to install the Cisco Unity server into a Windows NT 4.0 domain, the Cisco Unity server must be a member server, and you must use Exchange 5.5 instead of Exchange 2000.
To make Windows 2000 Setup disks
Step 1 Take Cisco Unity Operating System 2000 Disc 1 and four blank, formatted, high-density disks to a computer that has a CD-ROM drive and is running Windows 9x or Windows 2000.
Step 2 Insert Cisco Unity Operating System 2000 Disc 1 in the CD-ROM drive.
Step 3 Browse to the Bootdisk directory.
Step 4 Double-click Makebt32.exe.
Step 5 Follow the on-screen prompts.
To install Windows 2000 Server
Step 1 If the system key is a USB key and if it is attached to the server, remove it.
Caution If you run the installation program with a USB system key attached to the server, then installing the correct driver for the USB key will not work properly.
Step 2 Insert Cisco Unity Operating System 2000 Disc 1 in the CD-ROM drive. If no operating system is installed on the server, change the BIOS so the system attempts to start from the CD-ROM drive before it attempts to start from the hard disk.
or
If the CD-ROM drive in the server is not bootable, insert Windows 2000 Setup Disk 1 in drive A.
Step 3 If you are not installing on a Dell server, restart the server and skip to Step 9.
If you are installing on a Dell server and are not installing a RAID, restart the server and skip to Step 9.
If you are installing on a Dell server and are installing a RAID, continue with Step 4.
Step 4 Restart the server, and press F6 as soon as the following message appears at the bottom of the screen: "Press F6 if you need to install a third-party SCSI or RAID controller."
Caution If you are not certain that you pressed F6 before the message cleared, restart the server and try again. This is the only opportunity you will have to indicate to the installation program that you are installing a RAID driver.
Step 5 When the text "Setup could not determine..." appears, press S to specify an additional device.
Step 6 When prompted, insert Dell PERC 2 RAID Driver Diskette B3070 for Windows 2000 in drive A, and press Enter.
Step 7 In the list, select DELL PERC 2 2, 2/Si, 3/Si, 3/Di Raid Controllers, and press Enter.
Step 8 When the text "Setup will load support..." appears, press Enter.
Step 9 Follow the on-screen prompts until you are prompted to specify the partition on which to install Windows 2000.
Step 10 If no operating system is installed on the server, skip to Step 11.
If you are installing Windows 2000 on the same partition where an operating system is already installed, select and delete that partition.
Step 11 Select the partition (or unpartitioned space) on which to install Windows 2000, and press Enter.
Step 12 If the partition you selected in Step 11 is unformatted, select Format the Partition Using the NTFS File System, and press Enter.
Otherwise, skip to Step 13.
Step 13 Follow the on-screen prompts until you are prompted to enter a product/CD key.
Step 14 Enter the key for Cisco Unity Operating System 2000 from the CD jewel case liner.
Step 15 Click Next.
Step 16 Follow the on-screen prompts until you are prompted to select a licensing mode.
Step 17 Click Per Seat for the licensing mode, then click Next to continue.
Step 18 Follow the on-screen prompts to complete the installation.
Step 19 At the end of the installation, click Finish, and the server automatically restarts.
Step 20 Log on to Windows 2000. The Windows 2000 Configure Your Server dialog box appears.
Step 21 Click I Will Configure This Server Later, and click Next.
Step 22 Uncheck the Show This Screen at Startup check box.
Step 23 Close the window.
To install Windows 2000 Service Pack 2
Step 1 Log on to Windows.
Step 2 Insert Cisco Unity Operating System 2000 Disc 2, Service Pack 2 in the CD-ROM drive.
Step 3 Browse to the root directory, and double-click W2ksp2.exe.
Step 4 Follow the on-screen prompts to complete the installation.
Step 5 Remove the compact disc.
Step 6 Restart the server.
Installing Additional Windows 2000 Languages
If you want to view the Windows user interface in languages other than English, install the Windows 2000 Multilanguage User Interface and the applicable languages.
To install Windows 2000 Multilanguage User Interface
Step 1 Log on to Windows.
Step 2 Depending on which language(s) you want to install, insert the applicable Cisco Unity Operating System 2000 disc in the CD-ROM drive:
Cisco Unity
Operating System 2000 Disc 3
|
For Chinese (simplified), Chinese (traditional), Dutch, French, German, Italian, Japanese, Korean, Spanish, or Swedish.
|
Cisco Unity
Operating System 2000 Disc 4
|
For Arabic, Czech, Danish, Finnish, Greek, Hebrew, Hungarian, Norwegian, Polish, Portuguese (Brazil), Portuguese (Portugal), Russian, or Turkish.
|
If the disc does not run automatically, browse to the root directory, and double-click Muisetup.exe.
Step 3 Check the check boxes for the languages you want to install, and click OK.
Step 4 Click OK.
Assigning a Static IP Address
The Cisco Unity server must have an IP address for network administration of Cisco Unity and for subscriber access to the Cisco Unity ActiveAssistant.
When a baseline system is connected to a network that has a Dynamic Host Configuration Protocol (DHCP) server, the Cisco Unity server is configured to automatically obtain an IP address from the DHCP server. A component system with Windows 2000 installed by using the "Installing Windows 2000 Server (Component System Only)" section is also configured to obtain an IP address from the DHCP server.
If the network does not have a DHCP server or if you prefer to manually assign a static IP address, do the following procedure.
To assign a static IP address
Step 1 On the Windows Start menu, click Settings > Control Panel > Network and Dial-Up Connections > Local Area Connection.
Step 2 Click Properties.
Step 3 In the Components Checked Are Used by This Connection list, check the Internet Protocol (TCP/IP) check box.
Step 4 Click Internet Protocol (TCP/IP) (do not uncheck the check box), and click Properties.
Step 5 Enter applicable values. For more information, refer to Windows 2000 Help.
Step 6 Click OK.
Step 7 Restart the server.
Verifying the IP Address
To verify the IP address
Step 1 On the Windows Start menu, click Programs > Accessories > Command Prompt.
Step 2 Find the IP address of a router or some other well-known name server on the same network segment as the Cisco Unity server. In the Command Prompt window, enter ipconfig /all, and press Enter.
Step 3 Ping the router or other server whose IP address you found in Step 2. In the Command Prompt window, enter ping <IP address>, and press Enter.
Step 4 If the router sends a reply, the Cisco Unity server has a valid IP address.
If the router does not reply, either the Cisco Unity server has a problem obtaining an address from the DHCP server, or the assigned static IP address conflicts with the IP address of another computer on the network. Verify the network settings. If needed, troubleshoot any problem as you would a network connectivity problem.
Installing the USB Key Driver and Attaching the USB System Key (Component System Only)
If the system key is a USB key and if you are installing Cisco Unity on a component system, install the driver for the key. (The driver is already installed on a baseline system.)
To install the USB key driver and attach the USB system key
Step 1 If you installed Windows 2000 while the USB key was attached, a default USB driver was installed automatically. Do the next procedure, "To remove the default USB driver" first.
Step 2 Insert Cisco Unity Disc 1 in the CD-ROM drive.
Step 3 Browse to the directory SecurityKeySetup, and double-click Setup.exe.
Step 4 Follow the on-screen prompts to complete the installation. Accept all default values.
Step 5 When the installation program finishes, plug the USB system key into any USB port on the Cisco Unity server.
Do the following procedure only if you installed Windows 2000 with the USB key already attached.
To remove the default USB driver
Step 1 On the Windows Start menu, click Settings > Control Panel > System.
Step 2 In the System Properties dialog box, click the Hardware tab.
Step 3 Click Device Manager.
Step 4 In the Device Manager dialog box, expand Other Devices.
Step 5 Right-click USB Token, and click Uninstall.
Step 6 In the Confirm Device Removal dialog box, click OK.
Step 7 Close the Device Manager dialog box, the System Properties dialog box, and Control Panel.
Step 8 Install the USB key driver. Do the previous procedure, "To install the USB key driver and attach the USB system key".
Installing Active Directory or Adding the Cisco Unity Server to an Existing Domain
Caution If the Cisco Unity server will be the only server in the domain, you must install Active Directory. However, because Active Directory is a very processor- and memory-intensive application, if you are adding the Cisco Unity server to an existing domain, we strongly recommend that you do not also install Active Directory on the Cisco Unity server. Instead, do the procedure in the
"Existing Domain" section.
Active Directory
To install Active Directory
Step 1 On the Windows Start menu, click Run, then run Dcpromo.
Step 2 Click Next.
Step 3 Follow the on-screen prompts until the Permissions dialog box appears.
If you are installing the Cisco Unity system in the Voice Messaging Only configuration, follow the on-screen prompts and use the values in Table 2-1.
For other configurations, consult the system administrator to determine how to set up the server.
Table 2-1 Values for the Voice Messaging Only Configuration
Dialog Box Name
|
Value
|
Domain Controller Type
|
Domain Controller for a New Domain
|
Create Tree or Child Domain
|
Create a New Domain Tree
|
Create or Join Forest
|
Create a New Forest of Domain Trees
|
New Domain Name
|
Consult the system administrator.
|
NetBIOS Domain Name
|
Consult the system administrator.
|
Database and Log Locations
|
If possible, choose separate hard disks for the database and the logs.
|
Shared System Volume
|
Consult the system administrator.
|
Step 4 In the Permissions dialog box, click Permissions Compatible with Pre-Windows 2000 Servers.
Caution If you choose the other option, Permissions Compatible Only with Windows 2000 Servers, Cisco Unity will not work.
If you are not installing the Cisco Unity system into an Exchange 2000 cluster, consult the system administrator.
Step 5 Click Next.
Step 6 Enter and confirm a password.
Step 7 Click Next.
Step 8 Review the settings, and click Next to install Active Directory.
Step 9 Click Finish.
Step 10 Click Restart Now.
Existing Domain
Do the following procedure to add the Cisco Unity server to an existing domain without making it an additional domain controller in that domain.
If you are installing the Cisco Unity system in the Voice Messaging Only configuration, do the procedure in the "Active Directory" section instead.
To add the Cisco Unity server to an existing domain
Step 1 On the Windows Start menu, click Settings > Control Panel > System.
Step 2 Click the Network Identification tab.
Step 3 Click Properties.
Step 4 In the Identification Changes dialog box, click Domain, and enter the name of the domain that you want to join.
Step 5 Click OK.
Step 6 In the Domain Username and Password dialog box, enter the name and password of an account that has permission to add computers to the domain.
Step 7 Click OK three times.
Step 8 Click Yes to restart the server.
Installing SQL Server 2000 or MSDE 2000
Install SQL Server 2000 or MSDE 2000, depending on the number of voice ports you are connecting with the Cisco Unity server:
SQL Server 2000
|
For systems with more than 16 ports.
|
MSDE 2000
|
For systems with 16 ports or fewer.
|
Caution Cisco Unity systems with 16 voice ports or fewer are licensed only for MSDE 2000, not for SQL Server 2000. If you install SQL Server 2000 on a system with 16 ports or fewer, Cisco TAC will not provide support for the system.
Whether you are installing SQL Server 2000 or MSDE 2000, the software must be installed on the Cisco Unity server. Installing it on another server is not supported.
SQL Server 2000
To install SQL Server 2000
Step 1 Log on to Windows.
Step 2 Insert the Cisco Unity Data Store 2000 compact disc in the CD-ROM drive.
Step 3 When the Microsoft SQL Server 2000 Standard Edition window appears, click SQL Server 2000 Components.
Step 4 In the Install Components window, click Install Database Server.
Step 5 In the Welcome dialog box, click Next.
Step 6 In the Computer Name dialog box, click Next to accept the default setting Local Computer.
Step 7 In the Installation Selection dialog box, click Next to accept the default setting Create a New Instance of SQL Server, or Install Client Tools.
Step 8 Follow the on-screen prompts until the CD Key dialog box appears.
Step 9 Enter the key for Cisco Unity Data Store 2000 from the "Software CD Keys" insert at the front of the CD wallet.
Step 10 Click Next.
Step 11 In the Installation Definition dialog box, click Next to accept the default setting Server and Client Tools.
Step 12 In the Instance Name dialog box, check the Default check box.
Step 13 Click Next.
Step 14 In the Setup Type dialog box, click Next to accept the default setting Typical.
Step 15 In the Services Accounts dialog box, click Use the Same Account for Each Service.
Step 16 Click Use a Domain User Account.
Step 17 Under Service Settings, in the Username, Password, and Domain boxes, specify a member of the Domain Admins group.
Step 18 Click Next.
Step 19 In the Authentication Mode dialog box, click Windows Authentication Mode. (Mixed Mode is supported, but it is less secure.)
Step 20 Under Add Password for the SA Login, enter and confirm a password for the SQL Server system administrator logon, and click Next.
Step 21 In the Start Copying Files dialog box, click Next.
Step 22 In the Choose Licensing Mode dialog box, click Processor License For, and specify the number of processors in the Cisco Unity server.
Step 23 Click Continue.
Step 24 If you are prompted about shutdown tasks before continuing with the installation, click Next.
Step 25 Click Finish.
MSDE 2000
Do the following two procedures in the order listed to install MSDE 2000.
Caution MSDE 2000 is not the same as SQL Server 2000 Personal Edition. Do not install Personal Edition.
To install MSDE 2000
Step 1 Insert the Cisco Unity Data Store 2000 compact disc in the CD-ROM drive.
Step 2 Browse to the directory MSDE, and double-click Setup.exe.
Step 3 When the installation is complete, click Yes to restart the server. Leave the Cisco Unity Data Store 2000 compact disc in the CD-ROM drive.
To install Enterprise Manager
Step 1 When the server restarts, log on to Windows.
Step 2 If the Cisco Unity Data Store 2000 compact disc does not run automatically, browse to the root directory, and double-click Autorun.exe.
Step 3 Click SQL Server 2000 Components.
Step 4 Click Install Database Server.
Step 5 In the Welcome dialog box, click Next.
Step 6 In the Computer Name dialog box, click Next to accept the default setting Local Computer.
Step 7 In the Installation Selection dialog box, click Next to accept the default setting Create a New Instance of SQL Server, or Install Client Tools.
Step 8 Follow the on-screen prompts until the CD Key dialog box appears.
Step 9 Enter the key for Cisco Unity Data Store 2000 from the "Software CD Keys" insert at the front of the CD wallet.
Step 10 Click Next.
Step 11 In the Installation Definition dialog box, click Client Tools Only.
Step 12 Click Next.
Step 13 In the Select Components dialog box, uncheck all check boxes in the Components list except Management Tools.
Step 14 Select Management Tools (but do not uncheck the check box).
Step 15 In the Sub-Components list, uncheck all check boxes except Enterprise Manager, and click Next.
Step 16 In the Start Copying Files dialog box, click Next.
Step 17 Click Finish.
Installing Internet Explorer
Caution When you install Internet Explorer, the file WScript.exe is installed automatically. Do not remove WScript.exe, or Cisco Unity Setup will fail.
To install Internet Explorer
Step 1 Insert the Internet Explorer 5.01 and 5.5 compact disc in the CD-ROM drive.
Step 2 When the Internet Explorer 5 Family and Internet Tools window appears, click Install Internet Explorer 5.01 and Internet Tools or Install Internet Explorer 5.5 and Internet Tools.
Step 3 Follow the on-screen prompts to complete the installation.
Installing Message Queuing 2.0
To install Message Queuing 2.0
Step 1 On the Windows Start menu, click Settings > Control Panel > Add/Remove Programs.
Step 2 Click Add/Remove Windows Components.
Step 3 In the Windows Components dialog box, check the Message Queuing Services check box. Do not change any other items.
Step 4 Click Next.
Step 5 In the Message Queuing Type dialog box, click Next. Do not change any items.
Step 6 If the Message Queuing Server dialog box appears, click Message Queuing Will Not Access a Directory Service, and click Next.
Step 7 If the Windows NT 4.0 Message Queuing Clients dialog box appears, click No, Do Not Change the Permissions, and click Next.
Step 8 When you are prompted, insert Cisco Unity Operating System 2000 Disc 1 in the CD-ROM drive, and click OK.
Step 9 In the Completing the Windows Components Wizard dialog box, click Finish.
Step 10 Close the Add Remove Programs dialog box and Control Panel.
Installing NNTP Service (Exchange 2000 Only)
Install Microsoft NNTP Service if you are installing Exchange 2000 on the Cisco Unity server or if you are connecting Cisco Unity to an Exchange 2000 server.
To install NNTP Service
Step 1 On the Windows Start menu, click Settings > Control Panel > Add/Remove Programs.
Step 2 Click Add/Remove Windows Components.
Step 3 Click Internet Information Services (IIS) (but do not uncheck the check box), and click Details.
Step 4 In the Internet Information Services (IIS) dialog box, check the NNTP Service check box.
If the SMTP Service check box is not already checked, check it, too.
Step 5 Click OK.
Step 6 Click Next.
Step 7 When the installation is complete, click Finish.
Step 8 Close the Add Remove Programs dialog box and Control Panel.
Installing Exchange, Including Administration Software (Selected Configurations Only)
Do this section if you are installing Exchange 2000 Server or Exchange Server 5.5 on the Cisco Unity server.
(If you are not installing Exchange 2000 Server or Exchange Server 5.5 on the Cisco Unity server, see the "Installing Exchange Administration Software Only" section. Later in the installation, you specify an Exchange server on the network for the Cisco Unity server to connect with.)
This section contains procedures for installing Exchange 2000 Server and Exchange Server 5.5 on the Cisco Unity server. Do the procedures in the order listed for your version of Exchange, which includes administration software.
The procedures apply only to the compact discs that are currently shipping with Cisco Unity. If you are using different discs (for example, Microsoft BackOffice Server), the procedures may differ.
If you are installing the Cisco Unity system in the Unified Messaging in an Existing Exchange Site configuration, installing Exchange on the Cisco Unity server is:
Optional
|
When the site is not using Exchange 2000 clustering.
|
Required
|
When the site is using Exchange 2000 clustering.
|
Exchange 5.5 clusters are not supported with Cisco Unity version 3.0.
Caution Cisco Unity supports only active/passive clustering in a two-node cluster.
Caution If you are installing the Cisco Unity system in the Unified Messaging in an Existing Exchange Site configuration, if there are both Exchange 5.5 and Exchange 2000 servers on the site, and if you choose to install Exchange on the Cisco Unity server, you must install Exchange 2000. In this configuration, installing Exchange 5.5 on the Cisco Unity server is not supported.
Exchange 2000
To run Forestprep (required only if the Cisco Unity server is the first Exchange 2000 server in the forest)
Step 1 Log on to Windows by using the schema administrator account.
Step 2 Insert the Cisco Unity Message Store 2000 disc in the CD-ROM drive.
Step 3 On the Windows Start menu, click Run, and run
<CD-ROM drive letter>:\setup\i386\setup.exe /forestprep
Step 4 Follow the on-screen prompts.
Step 5 When you are prompted to enter a product identification number/CD key, enter the key for Cisco Unity Message Store 2000 from the "Software CD Keys" insert at the front of the CD wallet.
Step 6 Click Finish.
To run Domainprep (required only if the Cisco Unity server is the first Exchange 2000 server in the domain)
Step 1 Insert the Cisco Unity Message Store 2000 disc in the CD-ROM drive.
Step 2 On the Windows Start menu, click Run, and run
<CD-ROM drive letter>:\setup\i386\setup.exe /domainprep
Step 3 Follow the on-screen prompts.
Step 4 When you are prompted to enter a product identification number/CD key, enter the key for Cisco Unity Message Store 2000 from the "Software CD Keys" insert at the front of the CD wallet.
Step 5 If a warning appears about this being an insecure domain, click OK.
Step 6 Follow the on-screen prompts.
Step 7 Click Finish.
Changes to the Active Directory schema may take 15 minutes or more to replicate throughout the forest. These changes must finish replicating before you can install Exchange. To determine whether changes have replicated and to force replication if necessary, use Replication Monitor, which is available if you install Support Tools from the Cisco Unity Operating System 2000 compact disc.
To install Exchange 2000 Server
Step 1 Insert the Cisco Unity Message Store 2000 disc in the CD-ROM drive.
If the disc does not run automatically, browse to the root directory, and double-click Launch.exe.
Step 2 Click Exchange Server Setup.
Step 3 Follow the on-screen prompts until you are prompted to enter a product identification number/CD key.
Step 4 Enter the key for Cisco Unity Message Store 2000 from the "Software CD Keys" insert at the front of the CD wallet, and click Next.
Step 5 In the Component Selection dialog box, change the drive and path where components will be installed, if applicable. Do not change which components to install.
Step 6 Click Next.
Step 7 Follow the on-screen prompts until the installation is complete.
Step 8 Click Finish.
Exchange Server 5.5
To install Exchange Server 5.5
Step 1 If you are installing the Cisco Unity system into an existing Exchange site, log on to Windows by using the account that was used to install Exchange on other servers. Otherwise, use an account that has Services Account Administration permissions for the destination site and configuration containers.
Step 2 Insert Cisco Unity Message Store 5.5 Disc 1 in the CD-ROM drive.
Step 3 When the Microsoft Exchange Server Version 5.5 Window appears, click Setup Server and Components.
If the disc does not run automatically, browse to the root directory, and double-click Launch.exe.
Step 4 Click Microsoft Exchange Server 5.5.
Step 5 Accept the license agreement.
Step 6 Click Complete/Custom.
Step 7 Uncheck the Outlook Web Access check box.
Optionally, you can save disk space by choosing not to install the MS Mail and/or cc:Mail connectors if the site does not require them. In the list, click Microsoft Exchange Server, then click Change Option. Uncheck the MS Mail Connector or cc:Mail Connector check box. Then click OK.
Step 8 Click Continue.
Step 9 When you are prompted to enter a CD key, enter the key for Cisco Unity Message Store 5.5 from the "Software CD Keys" insert at the front of the CD wallet.
Step 10 Click OK.
Step 11 Follow the on-screen prompts until you are prompted to choose between joining an existing site and creating a new site:
Join an existing site
|
When there is an existing Exchange site and you want to add the Cisco Unity server to that site.
|
Create a new site
|
When the Cisco Unity server is the only Exchange server.
or
When there are other Exchange servers, but you are installing the Cisco Unity system in the Voice Messaging Only configuration.
|
Step 12 Follow the on-screen prompts until you are prompted to run the optimizer.
Step 13 Click Run Optimizer. Note that the Exchange Optimizer may automatically move files to different hard disks unless you specify otherwise.
Step 14 Follow the on-screen prompts to complete the installation.
Step 15 At the Microsoft Exchange Server screen, click Exit.
Step 16 Restart the server.
To change the LDAP port number
Step 1 On the Windows Start menu, click Programs > Microsoft Exchange > Microsoft Exchange Administrator.
Caution Change the LDAP port number only if you installed Exchange 5.5 and Active Directory on the same server.
Step 2 In the site container, open the Configuration container.
Step 3 Under Configuration, click Protocols.
Step 4 In the right pane, double-click LDAP (Directory) Site Defaults.
Step 5 On the General tab, change Port Number to 379 (or another available port number).
Step 6 Click OK, and close the Exchange Administrator.
Microsoft recommends that all Exchange 5.5 servers on the network have the same service pack installed. Therefore, install Exchange 5.5 Service Pack 4 on the Cisco Unity server and on the other Exchange 5.5 servers in the site.
To install Exchange Service Pack 4
Step 1 Insert Cisco Unity Message Store 5.5 Disc 2, Service Pack 4 in the CD-ROM drive.
Step 2 Browse to the directory Eng\Server\Setup\I386, and double-click Update.exe.
Step 3 Follow the on-screen prompts to complete the installation.
Step 4 Restart the server.
To configure Exchange
Step 1 On the Windows Start menu, click Programs > Microsoft Exchange > Microsoft Exchange Administrator.
Step 2 In the dialog box that appears, click Browse.
Step 3 In the Server Browser dialog box, click the name of the Cisco Unity server, and click OK.
Step 4 In the Connect to Server dialog box, click Set as Default, and click OK.
Step 5 If you changed the LDAP port number, restart the server.
Installing Exchange Administration Software Only
Do this section if you are not installing Exchange 2000 or Exchange 5.5 on the Cisco Unity server. Later in the installation, you specify an Exchange server on the network for the Cisco Unity server to connect with.
(If you are installing Exchange 2000 or Exchange 5.5 on the Cisco Unity server, see the "Installing Exchange, Including Administration Software (Selected Configurations Only)" section.)
This section contains procedures for installing Exchange 2000 and Exchange 5.5 administration software. Install the applicable administration software on the Cisco Unity server:
Exchange 2000
administration software
|
When the Exchange organization contains only Exchange 2000 servers or contains both Exchange 2000 and Exchange 5.5 servers.
|
Exchange 5.5
administration software
|
When the Exchange organization contains only Exchange 5.5 servers.
|
Exchange 2000
To install Exchange 2000 administration software
Step 1 Insert the Cisco Unity Message Store 2000 disc in the CD-ROM drive.
If the disc does not run automatically, browse to the root directory, and double-click Launch.exe.
Step 2 Click Exchange Server Setup.
Step 3 Follow the on-screen prompts until the Product Identification dialog box appears.
Step 4 Enter the key for Cisco Unity Message Store 2000 from the "Software CD Keys" insert at the front of the CD wallet, and click Next.
Step 5 In the Component Selection dialog box, in the Action column, change the action for Microsoft Exchange 2000 to Custom.
Step 6 Change the action for Microsoft Exchange Messaging and Collaboration Services to None.
Step 7 Leave the action for Microsoft Exchange System Management Tools as Install.
Step 8 Click Next.
Step 9 Follow the on-screen prompts to complete the installation.
Step 10 Restart the server.
Exchange 5.5
To install Exchange 5.5 administration software
Step 1 Insert Cisco Unity Message Store 5.5 Disc 1 in the CD-ROM drive.
Step 2 When the Microsoft Exchange Server Version 5.5 window appears, click Setup Server and Components.
If the disc does not run automatically, browse to the root directory, and double-click Launch.exe.
Step 3 Click Microsoft Exchange Server 5.5.
Step 4 Accept the license agreement.
Step 5 Click Complete/Custom.
Step 6 Uncheck all check boxes except the Microsoft Exchange Administrator check box.
Step 7 Click Continue.
Step 8 When you are prompted to enter a CD key, enter the key for Cisco Unity Message Store 5.5 from the "Software CD Keys" insert at the front of the CD wallet.
Step 9 Click OK.
Step 10 Follow the on-screen prompts to complete the installation.
Microsoft recommends that all Exchange 5.5 servers on the network have the same service pack installed. Therefore, install Exchange 5.5 Service Pack 4 on the Cisco Unity server and on the other Exchange 5.5 servers in the site.
To install Exchange Service Pack 4
Step 1 Insert Cisco Unity Message Store 5.5 Disc 2, Service Pack 4 in the CD-ROM drive.
Step 2 Browse to the directory Eng\Server\Setup\I386, and double-click Update.exe.
Step 3 Follow the on-screen prompts to complete the installation.
Step 4 Restart the server.
Updating the Active Directory Schema (Exchange 2000 only)
With Exchange 2000, several changes need to be made to the Active Directory schema for Cisco Unity to work properly. To see the changes that the schema update program makes, browse to the directory Schema\LdifScripts on Cisco Unity Disc 1, and view the file Avdirmonex2k.ldf.
In addition, if you plan to use either the Voice Gateway or the AMIS Gateway with Exchange 2000, update the schema with changes for the Internet Voice Connector. The gateways provided by the Internet Voice Connector are distinct:
Voice Gateway
|
Allows two Cisco Unity systems to send and receive SMTP mail while preserving the Cisco Unity-specific attributes in the messages. These attributes allow Cisco Unity to identify messages as voice messages.
|
AMIS Gateway
|
Allows Cisco Unity to send and receive voice messages from other voice messaging systems that support the AMIS analog protocol.
|
To see the changes that the schema update program makes for the Internet Voice Connector, browse to the directory Schema\LdifScripts on Cisco Unity Disc 1, and view the file Voicegateway.ldf. For installation information on the Internet Voice Connector, refer to the "Digital Networking" chapter of the Cisco Unity System Administration Guide.
Changes to the Active Directory schema may take 15 minutes or more to replicate throughout the forest. These changes must finish replicating before you can install Cisco Unity. To determine whether changes have replicated and to force replication if necessary, use Replication Monitor, which is available if you install Support Tools from the Cisco Unity Operating System 2000 compact disc.
To update the schema, use either the following procedure or any tool that applies LDIF scripts (for example, the Microsoft Ldifde utility).
To update the Active Directory schema
Step 1 On the computer that has the schema master role (the Cisco Unity server, unless you joined an existing domain), log on to Windows as a user who is a member of the Schema Admins group.
Step 2 Insert Cisco Unity Disc 1 in the CD-ROM drive.
Step 3 Browse to the directory ADSchemaSetup, and double-click ADSchemaSetup.exe.
Step 4 In the Active Directory Schema Setup dialog box, check the Exchange 2000 Directory Monitor check box.
Step 5 If you plan to install the Internet Voice Connector, check the Exchange 2000 Internet Voice Connector check box.
Step 6 Click OK.
Step 7 When the schema update has finished, Ldif.log and Ldif.err files are saved to the desktop. View the contents of these files to confirm that the update completed successfully.
Installing Other Software
Symantec pcAnywhere (Required)
If you are installing a baseline system, Symantec pcAnywhere has already been installed.
You install pcAnywhere because Cisco TAC may use it to perform troubleshooting.
We recommend that you configure the pcAnywhere host software not to start automatically when you restart the server.
To install pcAnywhere and configure it so that it does not start automatically
Step 1 Follow the manufacturer instructions to install pcAnywhere.
Step 2 On the Windows Start menu, click Programs > Symantec pcAnywhere.
Step 3 In the pcAnywhere toolbar, click Hosts.
Step 4 Right-click the Modem icon or the host that is configured for a modem, and click Properties.
Step 5 In the pcAnywhere Host Properties dialog box, click the Settings tab.
Step 6 In the Host Startup section, uncheck the Launch with Windows check box.
Step 7 Click OK to close the pcAnywhere Host Properties dialog box.
Step 8 Exit pcAnywhere.
Trend Micro ScanMail
Follow the manufacturer instructions to install Trend Micro ScanMail for Microsoft Exchange.
Note that scanning individual Exchange mailboxes can affect the performance of Cisco Unity.
Caution Do not configure ScanMail to block WAV attachments, or voice messages will be stripped of their recordings.
VERITAS Backup Exec
Follow the manufacturer instructions to install VERITAS Backup Exec.
RSA SecurID
Refer to the "Enhanced Phone Security" chapter of the Cisco Unity System Administration Guide.
Adobe Acrobat Reader
The Cisco Unity documentation is available on the Cisco Unity Documentation compact disc in Adobe Acrobat (PDF) format (as well as in HTML format). To view the PDF files, you need Adobe Acrobat Reader, which you can install from the Cisco Unity Documentation compact disc.
Creating Organizational Units and a Mailbox Store (Exchange 2000 Only)
With Exchange 2000, users and distribution lists are created in a location that you specify. If you want users and distribution lists to be created in custom organizational units (OUs), create the OUs now. Both OUs need to be in the same domain, but they do not need to be in the same domain as the Cisco Unity server. For information on creating OUs, refer to Active Directory Users and Computers Help.
You also have the option to create a custom mailbox store as the default for subscribers that are added through the Cisco Unity Administrator or that are imported from a CSV file. For information on creating a custom mailbox store, refer to Exchange System Manager Help. (You configure Cisco Unity to use the mailbox store during Cisco Unity Setup.)
Choosing the Windows Account Used for Installing Cisco Unity Software
The local system account owns most Cisco Unity services. The Windows account with which you log on to install Cisco Unity software owns the rest. Changing the owner or the password for each of the Cisco Unity services is time consuming, so choose an account that you do not intend to change regularly. You may even want to create an account whose sole purpose is to be the owner of the Cisco Unity services.
The following table lists Cisco Unity services and the account that owns each.
Table 2-2 Cisco Unity Services and Owner Accounts
Service
|
Owner Account
|
AvCsMgr
|
Local system account
|
AvCsGateway
|
Local system account
|
AvDirChangeWriter
|
Local system account
|
AvDSAD (Exchange 2000 only)
|
The account used to install Cisco Unity
|
AVDSEx55 (Exchange 5.5 only)
|
The account used to install Cisco Unity
|
AvDSGlobalCatalog
|
The account used to install Cisco Unity
|
AvGaenSvr
|
Local system account
|
AvRepDirSvrSvc
|
Local system account
|
AvUMRSyncSvr
|
Local system account
|
Cisco Unity Setup creates a number of Cisco Unity objects in Active Directory and in Exchange, so the account with which you log on must have proper security access to perform the necessary operations.
You can use the same account to install Cisco Unity software as you use to install Exchange on the Cisco Unity server.
If you are installing more than one Cisco Unity server in a site, you can use the same account to install Cisco Unity software on all of them.
Active Directory Permissions Required
The account with which you log on to Windows must:
•Be a member of the Local Administrators group on the Cisco Unity server.
•Have read permissions at the domain container level in each domain, if the Cisco Unity server will service more than one domain. (If the account is a member of the Enterprise Admins group, this permission is unnecessary.)
User Rights Required
The account with which you log on to Windows to connect to the directory must:
•Have the right to act as part of the operating system.
•Have the right to log on as a service.
Exchange Permissions Required If the Organization Contains Only Exchange 2000 Servers
•The account must have Full Exchange Administrator rights at the organization level. Delegate control by using the Exchange System Manager.
•Add the Cisco Unity server to the Exchange Domain Servers group in the domain in which the Cisco Unity server is being installed. This gives the Cisco Unity server permission to act as an Exchange server.
If you installed Exchange on the Cisco Unity server and used the same account that you used to install Exchange on other servers, the account already has this permission.
•Either add the account to the Enterprise Admins group or grant the permissions listed in the "Active Directory Permissions Required If the Account Is Not a Member of the Enterprise Admins Group" section. (Accounts used to administer Cisco Unity do not require this permission.)
Exchange Permissions Required If the Organization Contains Only Exchange 5.5 Servers
•If you installed Exchange on the Cisco Unity server by using a different account than you used to install Exchange on other servers, confirm that the account has Services Account Administration permissions for the site and the configuration container into which Cisco Unity is being installed. Add the permissions from an Exchange server in the site that the Cisco Unity server will be joining.
•During installation, the account can be a member of the Domain Admins group. Domain Admin rights ensure that Cisco Unity Setup can create default users during installation.
To accommodate customers' security concerns, this permission is no longer strictly required. Without the permission, you cannot use the Cisco Unity Administrator to create Cisco Unity subscribers and, therefore, Exchange mailboxes and Windows accounts. However, you can add Internet subscribers from Cisco Unity (which do not require Exchange mailboxes or Windows accounts), and you can still import subscribers from Exchange.
Caution If the account used to install Cisco Unity software is not a member of the Domain Admins group, you cannot create subscriber accounts by using the Cisco Unity Administrator. Instead, you must import subscribers from Exchange or from a comma-delimited text file.
Exchange Permissions Required If the Organization Contains Both Exchange 2000 and Exchange 5.5 Servers
•The account must have Exchange 2000 Full Exchange Administrator rights at the organization level. Delegate control by using the Exchange System Manager.
•If the Cisco Unity server will service more than one domain, the account must have read permissions at the domain container level in each domain.
If you want both Exchange 2000 and Exchange 5.5 users to be Cisco Unity subscribers:
•Grant Services Account Administration permissions to the Exchange Domain Servers group for the Exchange 5.5 site and configuration containers.
•If the Cisco Unity server is not already in the Exchange Domain Servers group in the domain in which the Cisco Unity server is installed, add it to that group. This gives the Cisco Unity server permission to act as an Exchange server.
•Either add the account to the Enterprise Admins group or add the rights listed in the "Active Directory Permissions Required If the Account Is Not a Member of the Enterprise Admins Group" section. (Accounts used to administer Cisco Unity do not require this permission.)
Active Directory Permissions Required If the Account Is Not a Member of the Enterprise Admins Group
If you prefer that the account used to connect to the directory have the minimum permissions possible (instead of being a member of the Enterprise Admins group), grant the account the following permissions:
•In the domain container that contains the Cisco Unity server, do one of the following:
–Grant the account permission to create Container objects. Use ADSI Edit.
–Using another account, at the root of the domain, create a container named Unity. Within the Unity container, create a container named Locations. Use ADSI Edit.
•If you created Unity and Locations containers manually, in the Locations container, grant the account permissions to create, read, and write the object CiscoECSBUUMLocation. (If this object does not exist, you have not updated the Active Directory schema.) Use Active Directory Users and Computers.
•By default, Cisco Unity subscribers and distribution groups (also known as distribution lists) are created in the Active Directory Users container. If you want to use this folder for subscribers and distribution lists, grant the account permissions to create, read, and write the User and Group objects in that container. Use Active Directory Users and Computers.
If you created custom organizational units or you want to choose another location for subscribers, distribution lists, or both, grant the account the same permissions in the custom organizational units.
Installing Cisco Unity Software
There are two parts to installing Cisco Unity: Running the Cisco Unity Setup program, and connecting Cisco Unity to the directory (when you run the Configuration Setup program).
Cisco Unity Setup
To run Cisco Unity Setup
Step 1 Log on to Windows by using an account that has the necessary rights. See the "Choosing the Windows Account Used for Installing Cisco Unity Software" section.
Step 2 Insert Cisco Unity Disc 1 in the CD-ROM drive.
Step 3 Browse to the root directory, and double-click Setup.exe.
Step 4 Follow the on-screen prompts until the System Key dialog box appears.
If the Confirm Demonstration License Settings dialog box appears first, one of the following problems has occurred:
•The system key is not fully attached or is not attached at all. Confirm that the key is fully seated.
•If the key is a USB key, the driver for the key is not installed correctly. See the "Installing the USB Key Driver and Attaching the USB System Key (Component System Only)" section.
Click Cancel, click Yes, and click Finish to exit Setup. Then resolve the problem, and rerun Setup.exe. (If you continue the installation without resolving the problem, Cisco Unity will be installed as a demonstration system.)
Step 5 If you are upgrading from Cisco Unity 2.x to 3.0 without changing licensed features (such as number of ports and text-to-speech engine), in the System Key dialog box, click Use the Current License Settings, then skip to Step 8.
If you are installing a new Cisco Unity system or are upgrading from Cisco Unity 2.x to 3.0 and changing licensed features, in the System Key dialog box, click Update or Initialize License Settings from Update File, and continue with Step 6.
Step 6 Insert the Cisco Unity Activation Code disk in drive A.
(When Cisco Unity was registered on Cisco.com, Cisco replied with an e-mail containing an attached file with an activation code for the system key. The instructions in the e-mail directed that the attached file be saved to a disk. For more information, see the "Cisco Unity Activation Code" section.)
Step 7 Browse to drive A, click the file on the disk, then click Open.
Step 8 Click Next.
Step 9 Follow the on-screen prompts until the Select Features dialog box appears.
Step 10 If the Cisco Unity server contains Dialogic voice cards, check the Install Voice Card Software check box.
Otherwise, uncheck the Install Voice Card Software check box.
Step 11 Click Next.
Step 12 Follow the on-screen prompts until the Cisco Unity Languages dialog box appears.
Step 13 Choose the language(s) to install.
Caution If you are upgrading a Cisco Unity 2.x system to version 3.0, install and load the same phone languages on the Cisco Unity 3.0 system that were installed and loaded on the 2.x system. Otherwise, subscribers who are configured to use the missing languages will not be able to hear the system conversation in their language.
Australian English, New Zealand English, and Colombian Spanish are not available as text-to-speech (TTS) languages. To use one of these languages for your phone language, you must also install another language for your TTS language:
English (Australian)
|
Also install English (United States) for TTS.
|
English (New Zealand)
|
Also install English (United States) for TTS.
|
Spanish (Colombia)
|
Also install Spanish (Spain) for TTS.
|
TTS is not available in Norwegian.
Step 14 Follow the on-screen prompts until you are prompted to restart the Cisco Unity server.
Caution If you are upgrading from Cisco Unity version 2.x to 3.0, and if you plan to transfer subscriber information from the old system to the new, do not add any objects (such as subscribers and distribution lists) or remove any default objects until after you import data from the existing Cisco Unity system. The Cisco Unity Database Import utility requires that data be imported into a clean Cisco Unity system.
Step 15 If the server does not contain Dialogic D/120JCT-EURO or D/240PCI-T1 voice cards, check the Yes, I Want to Restart My Computer Now check box, and click Finish.
If the server contains Dialogic D/120JCT-EURO or D/240PCI-T1 voice cards, uncheck the Yes, I Want to Restart My Computer Now check box, and click Finish.
Step 16 If the server contains Dialogic D/120JCT-EURO or D/240PCI-T1 voice cards, do the procedure under "Software Settings" for your voice card in Appendix A, "Voice Cards." When you are finished, restart the Cisco Unity server.
Directory Connection
This section contains procedures for completing the Cisco Unity installation on an Exchange 2000 system and on an Exchange 5.5 system. Do the procedure(s) for your version of Exchange.
If you are installing the Cisco Unity system in the Unified Messaging in an Existing Exchange Site configuration and the site contains both Exchange 5.5 and Exchange 2000 servers, use the procedure(s) for Exchange 2000.
Exchange 2000
To connect Cisco Unity with the directory
Step 1 Start the Cisco Unity server.
Step 2 Confirm that Exchange is running on the server where you want to create new mailboxes. If Exchange is not running, connecting to the directory will fail.
Step 3 Log on to Windows by using an account that has the necessary rights and permissions. See the "Choosing the Windows Account Used for Installing Cisco Unity Software" section.
Step 4 On the Windows desktop, double-click Configuration Setup.
Step 5 On the Welcome screen, click Next.
Step 6 Click Microsoft Exchange 2000.
Step 7 Click Next.
Step 8 Choose the Exchange server and mail store in which to create new mailboxes.
For the Unified Messaging in an Existing Exchange Site configuration:
•We recommend that you choose one of the less busy Exchange servers in the site. All voice messages pass through the server you choose here on their way to user mailboxes.
•If Exchange is installed on the Cisco Unity server to support Exchange clusters, choose the Cisco Unity server.
Step 9 Click Next.
Step 10 Enter the domain in which you want Cisco Unity to create users and distribution lists.
Step 11 If you created custom organizational units for users or distribution lists, click the corresponding Modify button to specify them here.
Step 12 Click Next.
Step 13 Enter the password for the current account.
Step 14 Click Next.
Step 15 When configuration is complete, click Finish.
If Cisco Unity is servicing mailboxes that reside on Exchange 2000 clusters, you need to change an account password and several Cisco Unity services.
To change the account used by Cisco Unity services (Exchange 2000 clusters only)
Step 1 In Active Directory Users and Computers, change the password on the Unity_<servername> account.
Step 2 In Active Directory Users and Computers, add the Unity_<servername> account to the Exchange Domain Servers group.
Step 3 In Active Directory Users and Computers, add the Unity_<servername> account to the Local Administrators group.
Step 4 In Services, change the following services to log on by using the Unity_<servername> account:
•AvCsGateway
•AvCsMgr
•AvGaenSvr
•AvRepDirSvrSvc
•AvUMRSyncSvr
Step 5 Restart the Cisco Unity server.
Exchange 5.5
To connect Cisco Unity with the directory
Step 1 Start the Cisco Unity server.
Step 2 Confirm that Exchange is running on the server where you want to create new mailboxes. If Exchange is not running, connecting to the directory will fail.
Step 3 Log on to Windows by using an account that has the necessary rights and permissions. See the "Choosing the Windows Account Used for Installing Cisco Unity Software" section.
Step 4 On the Windows desktop, double-click Configuration Setup.
Step 5 On the Welcome screen, click Next.
Step 6 Click Microsoft Exchange 5.5.
Step 7 Click Next.
Step 8 Enter the name of the server on which Exchange 5.5 is installed.
For the Unified Messaging in an Existing Exchange Site configuration, we recommend that you choose one of the less busy Exchange servers in the site. All voice messages pass through the server you choose here on their way to user mailboxes.
Step 9 If Active Directory and Exchange 5.5 are installed on the same server, change LDAP Port Number to the value that you entered in the "To change the LDAP port number" section.
Step 10 Click Next.
Step 11 Enter the password for the current account. The account is added to Cisco Unity as an administrator account.
Step 12 Click Next.
Step 13 Click OK to stop Cisco Unity services.
Step 14 When configuration is complete, click Finish.
Configuring a System That Includes Exchange 5.5 and Exchange 2000 Servers (Selected Systems Only)
You can skip this section if:
•The Active Directory Connector uses a two-way connection agreement between Exchange 5.5 and Windows 2000.
•You are using only Exchange 5.5 or only Exchange 2000.
If messages for Cisco Unity subscribers are stored on both Exchange 5.5 and Exchange 2000 servers, and if the Active Directory Connector uses a one-way connection agreement from Exchange 5.5 to Windows 2000, you need to create a new account in Exchange 5.5, change the account's permissions, and change selected Cisco Unity services to log on with this account. Otherwise, the Cisco Unity subscribers whose messages are stored in Exchange 5.5 will hear the fail-safe conversation when they try to listen to messages over the phone.
To configure a system that includes Exchange 5.5 and Exchange 2000 servers
Step 1 Using Exchange 5.5 Administrator, create a mailbox in the Exchange 5.5 directory. You do not need to associate the mailbox with a Windows NT account or Active Directory account. Do not use the following names:
•Unity_<servername>
•Unity Messaging System - <servername>
If there is more than one Cisco Unity server in the Exchange site, create one Exchange 5.5 mailbox for each Cisco Unity server.
The Active Directory Connector replicates the mailbox to Active Directory as a disabled account.
Step 2 After the mailbox replicates to Active Directory, enable the account in Active Directory Users and Computers, change the password, and move it to the Exchange 2000 server that you selected in Step 8 of the "To connect Cisco Unity with the directory" section.
Step 3 Using Active Directory Users and Computers, add the account to the Exchange Domain Servers group.
Step 4 Using Exchange 5.5 Administrator, grant Services Account Administration permissions to the account at the site and configuration levels.
Step 5 Add the account to the Administrators group on the Cisco Unity server.
Step 6 In the Services MMC, change the following Cisco Unity services so they log on by using the account:
•AvCsGateway
•AvCsMgr
•AvGaenSvr
•AvUMRSynchSvr
Step 7 Start Regedit.
Caution Changing the wrong registry key or entering an incorrect value can cause the server to malfunction. Before you edit the registry, confirm that you know how to restore it if a problem occurs. Note that a typical backup of the Cisco Unity server does not back up the registry. Refer to the "Restoring the Registry" Help topic in Regedit.exe or the "Restoring a Registry Key" Help topic in Regedt32.exe for additional information. If you have any questions about changing registry key settings, contact Cisco TAC.
Step 8 If you do not have a current backup of the registry, click Registry > Export Registry File, and save the registry settings to a file.
Step 9 Modify the values of the following keys in the registry under HKEY_LOCAL_MACHINE\Software\Active Voice\MALEx\1.0:
DisplayName
|
Must be the exact display name of the account that was replicated to Active Directory.
|
ServerName
|
Must be the name of the Exchange 2000 server on which the mailbox resides.
|
MailboxDn
|
Must be the exact legachExchangeDn (Exchange 5.5 style distinguished name) of the mailbox, for example, /O=<Org>/OU=<Site>/CN=Recipients/CN=<Alias>.
|
Step 10 Restart the Cisco Unity server.
Reinstalling Windows 2000 Service Pack 2
To reinstall Windows 2000 Service Pack 2
Step 1 Log on to Windows.
Step 2 Insert Cisco Unity Operating System 2000 Disc 2, Service Pack 2 in the CD-ROM drive.
Step 3 Browse to the root directory, and run W2ksp2.exe.
Step 4 Follow the on-screen prompts to complete the installation.
Step 5 Remove the compact disc.
Step 6 Restart the server.
Customizing the Cisco Unity System
You do most of these tasks by using the Cisco Unity Administrator. The tasks reference chapters in the Cisco Unity System Administration Guide that contain detailed information.
The Cisco Unity System Administration Guide is available by clicking the Online Documentation icon in the Cisco Unity Administrator. It is also available on the Cisco Unity Documentation compact disc and on Cisco.com at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/index.htm.
1. Back up Cisco Unity. Refer to the "Maintaining Cisco Unity" chapter.
2. Define system schedules:
•Identify standard business hours.
•Identify closed and weekend hours.
•Create custom schedules, if necessary.
•Identify holidays.
Refer to the "Schedule Settings" and "Holiday Settings" sections in the "System Settings" chapter.
3. Set up phone and GUI languages. Refer to the "Multiple Languages" chapter.
4. Set up third-party fax, if applicable. Refer to the "Integrating a Fax Server with Cisco Unity" chapter.
5. Set up connections between sites and between voice messaging systems, if applicable:
•Set up the Digital Networking feature. Refer to the "Digital Networking" chapter.
•Set up AMIS. Refer to the "AMIS" chapter.
6. Review or create the organization's call management plan. Refer to the "Call Management Tools" chapter.
7. Prepare to add subscribers:
•Create public distribution lists.
•Determine account policy.
•Review, change, and create classes of service.
•Review, create, and modify subscriber templates.
Refer to the "About Subscriber Accounts" chapter.
8. Set up enhanced phone security, if applicable. Create a new class of service or modify an existing one for the subscribers who will be using enhanced phone security. Refer to the "Enhanced Phone Security" chapter.
9. Create restriction tables, and assign them to the applicable class(es) of service. Refer to the "Restriction Tables" chapter.
10. Test the system configuration:
•Add a single subscriber (refer to the "Creating Subscriber Accounts" chapter). Log on to Cisco Unity as the test subscriber, record a name, and set a password.
•Confirm that the greeting, conversation, call transfer, and message options for the subscriber are working properly. Test the password.
•Verify that the subscriber inherited the correct class of service. Confirm access to the applicable licensed features.
•Make corrections to system configuration as necessary.
11. Add subscribers. Refer to the "Creating Subscriber Accounts" chapter.
12. Assign subscribers to screen those messages left in Cisco Unity that are not associated with a specific recipient, such as those left to the Unaddressed Messages distribution list. Refer to the "Message Handling" section in the "Subscriber and Operator Orientation" chapter.
13. Modify individual subscriber accounts as needed. Refer to the "Subscriber Settings" chapter.
14. Implement and then test the call management plan:
•Create call handlers. Refer to the "Call Handler Settings" chapter.
•Specify directory handler settings. Refer to the "Directory Handler Settings" chapter.
•Create interview handlers. Refer to the "Interview Handler Settings" chapter.
•Set up call routing. Refer to the "Call Routing" chapter.
15. Back up Cisco Unity. Refer to the "Maintaining Cisco Unity" chapter.
16. Train subscribers and operators to use Cisco Unity, if applicable. Refer to the "Subscriber and Operator Orientation" chapter.
Feedback
