重み付けランダム早期検出または分散重み付けランダム早期検出のパラメータ グループの設定
|
コマンド
-
random-detect-group
-
random-detect(VC 単位)
(注)
|
このコマンドは、Cisco IOS リリース 15.0(1)S ではサポートされていません。
|
コマンドの使用方法
Router(config)# random-detect-group group-name [dscp-based|prec-based]
Router(config)# interface atm type number
Router(config-if)# pvc [name] vpi/vci
Router(config-if-atm-vc)# random-detect [attach group-name ]
|
コマンドの使用方法
なし(この機能は存在しません)。
|
重み付けランダム早期検出の設定
|
コマンド
-
random-detect
-
random-detect dscp
-
random-detect(dscp-based キーワード)
-
random-detect flow
-
random-detect exponential-weighting-constant
-
random-detect(prec-based キーワード)
-
random-detect precedence
コマンドの使用方法
Router(config)# interface type number
Router(config-if)# random-detect [number]
Router(config-if)# random-detect exponential-weighting-constant exponent
Router(config-if)# random-detect flow
Router(config-if)# random-detect precedence {precedence|rsvp} min-threshold max-threshold max-probability-denominator
Router(config-if)# random-detect prec-based
Router(config-if)# random-detect dscp-based
Router(config-if)# random-detect dscp dscp-value min-threshold max-threshold[max-probability-denominator]
|
コマンドの使用方法
Router(config)# policy-map
policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# random-detect dscp dscp-value min-threshold max-threshold[ mark-probability-denominator]
Router(config-pmap-c)# random-detect clp clp-value min-threshold max-threshold[mark-probability-denominator]
Router(config-pmap-c)# random-detect cos cos-value min-threshold max-threshold[mark-probability-denominator]
Router(config-pmap-c)# random-detect discard-class discard-class-value min-threshold max-threshold[ mark-probability-denominator]
Router(config-pmap-c)# random-detectprecedence ip-precedence min-threshold max-threshold[mark-probability-denominator]
Router(config-pmap-c)# random-detect precedence-based
Router(config-pmap-c)# random-detect ecn
Router(config-pmap-c)# random-detect exponential-weighting-constant exponent
Router(config-pmap-c)# random-detect cos-based
Router(config-pmap-c)# random-detect dscp-based
|
コマンド
コマンドの使用方法
Router(config)# interface type number
Router(config-if)# random-detect [number]
Router(config-if)# random-detect flow
Router(config-if)# random-detect flow count number
Router(config-if)# random-detect flow average-depth-factor scaling-factor
|
コマンドの使用方法
なし(この機能は存在しません)。
|
帯域幅割り当ての設定
|
コマンド
コマンドの使用方法
Router(config)# interface type number
Router(config-if)# max-reserved-bandwidth percentage
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# bandwidth{bandwidth-in-kbps |remaining percent percentage | percent percentage }
|
カスタム キューイングの設定
|
コマンド
(注)
|
このコマンドは、Cisco IOS リリース 15.0(1)S ではサポートされていません。
|
コマンドの使用方法
Router(config)# interface type number
Router(config-if)# custom-queue-list[list-number]
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# bandwidth{
bandwidth-in-kbps |remaining percent percentage |percent percentage }
|
プライオリティ キューイングの設定
|
コマンド
-
ip rtp priority
-
ip rtp reserve
コマンドの使用方法
Router(config)# interface type number
Router(config-if)# ip rtp priority starting-port-number port-range bandwidth
Router(config)# interface type number
Router(config-if)# ip rtp reserve lowest-udp-port range-of-ports [maximum-bandwidth] 1000
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-name
Router(config-pmap-c)# priority
|
重み付け均等化キューイングの設定
|
コマンド
コマンドの使用方法(Cisco IOS リリース 15.0(1)S)
Router(config)# interface type number
Router(config-if)# fair-queue
コマンドの使用方法(Cisco IOS リリース 15.1(3)T)
Router(config)# interfacetype number
Router(config-if)# fair-queue [congestive- discard-threshold [
dynamic-queue-count [reserved-queue-count ]]]
|
コマンドの使用方法(Cisco IOS リリース 15.0(1)S)
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue
コマンドの使用方法(Cisco IOS リリース 15.1(3)T)
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue[dynamic-queues ]
|
インターフェイスへのポリシー グループの割り当て
|
コマンド
(注)
|
このコマンドは、Cisco IOS リリース 15.0(1)S ではサポートされていません。
|
コマンドの使用方法
Router(config)# interface type number
Router(config-if)# priority-group list-number
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
Router(config-pmap-c)# priority bandwidth-in-kbps [burst-in-bytes]
Router(config-pmap-c)# priority percent percent [burst-in-bytes]
Router(config-pmap-c)# priority level level
Router(config-pmap-c)# priority level level [bandwidth-in-kbps [burst-in-bytes]]
Router(config-pmap-c)# priority level level[percent percent [burst-in-bytes]]
|
切り替えられた PVC トラフィック シェーピング キューからの DE パケットを廃棄するためのしきい値の設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay congestion threshold de percentage
|
コマンドの使用方法
Router(config)# policy-map policy-map-name1
Router(config-pmap)# class class-default
Router(config-pmap-c)# random-detect discard-class-based
Router(config-pmap-c)# random-detect discard-class discard-class min-threshold max-threshold
Router(config-pmap-c)# exit
Router(config-pmap)# exit
Router(config)# policy-map shape
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate
Router(config-pmap-c)# service-policy policy-map-name1
Router(config-pmap-c)# exit
Router(config-pmap)# exit
Router(config)# policy-map policy-map-name2
Router(config-pmap)# class class-name
Router(config-pmap-c)# set discard-classdiscard-class
|
仮想回線に対するフレーム リレー カスタム キューイングの設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay custom-queue-list list-number
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# bandwidth{bandwidth-in-kbps | remaining percent percentage | percentpercentage }
|
フレーム リレー ECN ビットしきい値の設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)#
frame-relay congestion threshold ecn percentage
|
コマンドの使用方法
なし(この機能は存在しません)。
最も近いものは、(ECN に基づかない)MQC トラフィック シェーピングです。
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate
|
フレーム リレー重み付け均等化キューイングの設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay fair-queue [discard-threshold [dynamic-queue-count[reserved-queue-count [buffer-limit]]]]
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue
Router(config-pmap-c)# fair-queue queue-limit packets
(注)
|
queue-limit packets キーワードと引数のペアは、Cisco IOS リリース 15.1(3)T ではサポートされていません。
|
|
PVC 上でのフレーム リレー プライオリティ キューイングの設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay ip rtp priority starting-port-number port-range bandwidth
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-name
Router(config-pmap-c)# priority bandwidth-in-kbps [burst-in-bytes]
|
マップ クラスに関連付けられた仮想回線へのプライオリティ キューの割り当て
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relaymap-class-name
Router(config-map-class)# frame-relay priority-group group-number
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
Router(config-pmap-c)# priority bandwidth-in-kbps [burst-in-bytes]
Router(config-pmap-c)# priority percent percentage [burst-in-bytes]
Router(config-pmap-c)# priority level level [percent
percentage [burst-in-bytes]]
(注)
|
priority level コマンドは、Cisco IOS リリース 15.1(3)T ではサポートされていません。
|
|
BECN に対するフレーム リレー レート調整の設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay adaptive-shaping becn
|
コマンドの使用方法
なし(この機能は存在しません)。最も近いものは、(BECN に基づかない)MQC トラフィック シェーピングです。
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape adaptive rate
|
ForeSight メッセージに対するフレーム リレー レート調整の設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config)# frame-relay adaptive-shaping foresight
|
コマンドの使用方法
なし(この機能は存在しません)。
|
BECN としてのフレーム リレー トラフィック シェーピング FECN のイネーブル化
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)#frame-relay fecn-adapt
|
コマンドの使用方法
なし(この機能は存在しません)。最も近いものは、(FECN/BECN に基づかない)MQC トラフィック シェーピングです。
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate
|
フレーム リレー拡張ローカル管理インターフェイスの設定
|
コマンド
(注)
|
このコマンドは、Cisco IOS リリース 15.0(1)S では隠されていません。
|
コマンドの使用方法
Router(config)# interface type number Router(config-if)#no ip address
Router(config-if)# encapsulation frame-relay
Router(config-if)# frame-relay lmi-typeansi
Router(config-if)# frame-relay traffic-shaping
Router(config-if)# frame-relay qos-autosense
|
コマンドの使用方法
なし(この機能は存在しません)。
|
フレーム リレー最小認定情報レート(MINCIR)の設定
|
コマンド
コマンドの使用方法
Router(config)# frame-relay mincir {in | out} bps
|
コマンドの使用方法
なし(この機能は存在しません)。
|
|
相手先固定接続(PVC)に対するフレーム リレー プライオリティの設定
|
コマンド
コマンドの使用方法
Router(config)# interface type number Router(config-if)#no ip address
Router(config-if)# frame-relay interface-queue priority 10 20 30 40
|
コマンドの使用方法 Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
Router(config-pmap)# class class-default
Router(config-pmap-c)# priority
|
フレーム リレー トラフィック シェーピングの設定
|
コマンド
-
frame-relay bc
-
frame-relay be
-
frame-relay cir
(注)
|
Cisco IOS リリース 15.1(3)T では、これらのコマンドは隠されていませんが、(PVC ではなく)SVC に対してのみ有効です。
|
コマンドの使用方法
Router(config)# map-class frame-relay map-class-name
Router(config-map-class)# frame-relay bc {in | out} committed-burst-size-in-bits
Router(config-map-class)# frame-relay be {in | out} excess-burst-size-in-bits
Router(config-map-class)# frame-relay cir {in | out} bits-per-second
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average
rate
|
VC でのフレーム リレー トラフィック シェーピングの設定
|
コマンド
コマンドの使用方法
Router(config)# map-class frame-relaymap-class-name
Router(config-map-class)# traffic-rate average [peak]
|
コマンドの使用方法
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average rate
Router(config-pmap-c)# service-policy output traffic-rate service-policy output traffic-rate
|
インターフェイスまたは VC のキュー内部のパケットのコンテンツを表示します。
|
コマンド
コマンドの使用方法
Router# show queue interface
|
コマンドの使用方法
Router# show policy-map interface
|
キューイング戦略の表示
|
コマンド
コマンドの使用方法
Router# show queueing
|
コマンドの使用方法
Router# show policy-map interface
|
重み付けランダム早期検出(WRED)情報の表示
|
コマンド
コマンドの使用方法
Router# show interfaces [type number] random-detect
|
コマンドの使用方法
Router# show policy-map interface
|
WRED パラメータ グループの表示
|
コマンド
コマンドの使用方法
Router# show random-detect-group
|
コマンドの使用方法
Router# show policy-map interface
|
トラフィック シェーピングの設定、キューイング、および統計情報の表示
|
コマンド
コマンドの使用方法
Router# show traffic-shape [interface-type interface-number]
Router# show traffic-shape queue [interface-number [dlci dlci-number]]
Router# show traffic-shape statistics [interface-type interface-number]
|
コマンドの使用方法
Router# show policy-map interface
|
重み付け均等化キューイング情報の表示
|
コマンド
コマンドの使用方法
Router# show interfaces [interface-type interface-number] fair-queue
|
コマンドの使用方法
Router# show policy-map interface
|