New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.1(x).

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.1(x) and tells you where they are documented.

Table 1. New and Changed Features for Cisco NX-OS Release 10.1(x)

Feature

Description

Changed in Release

Where Documented

CoPP

Added support to Cisco NX-OS N9K-X9624D-R2 and N9K-C9508-FM-R2 platform switches

10.1(2)

Cisco NX-OS ソフトウェア アップグレードの注意事項

RACL

Added support to Cisco NX-OS N9K-X9624D-R2 and N9K-C9508-FM-R2 platform switches

10.1(2)

Cisco NX-OS ソフトウェア アップグレードの注意事項

Redesign of the install deactivate CLI

Support for options to either downgrade to the base version of RPM or to uninstall RPM.

10.1(1)

機能またはサードパーティ RPM の操作に install CLI を使用する

RPM のインストール

Third-party RPM validation

Introduced a restriction on installation of unsigned or non-Cisco signed third-party RPMs, with an option to bypass the restriction.

10.1(1)

サードパーティ製RPMインストールのガイドライン

機能またはサードパーティ RPM の操作に install CLI を使用する

Enhanced ISSU with FC/FCoE

Support for Enhanced ISSU on FC/FCoE switch mode.

10.1(1)

Cisco NX-OS ソフトウェア アップグレードの注意事項

Standard ISSU

Support for Standard ISSU on 9300-GX platform switches.

10.1(1)

ISSU プラットフォームのサポート

64-bit Cisco NX-OS software image

Introduced a new 64-bit image of the Cisco NX-OS software

10.1(1)

ソフトウェア イメージについて