Configures the next generation Cisco Data Layer (CDL).

deployment-model deployment_model

Specify the k8s deployment resource requirement. The default value is large. NOTE: In a production environment, you must always use the large deployment model.

Must be one of the following:

• large

• small

enable-geo-replication { false | true }

Specify to enable or disable geo-replication.

Must be one of the following:

• false

• true

Default Value: false.

node-type k8s_node_label_value

Specify the K8s node label value for affinity.

Must be a string of 0-64 characters.

Default Value: .

system-id system_id

Specify the deployment system ID.

Must be an integer.

Default Value: 1.

Configures the list of datastores to be deployed.

advanced-config-profile profile_name

Specify the advanced configuration parameters profile name.

cluster-id cluster_id

Specify the K8s cluster ID.

Must be an integer in the range of 1-10.

Default Value: 1.

find-by-nuk-prefixes key_prefix

Specify the list of pre-configured non unique key prefix to support findbyNonUniqueKey API

Must be a string of 1-20 characters.

geo-remote-site list

Specify the list of geo replication sites.

label-config label_config

Specify the label configuration name.

slice-names slice_names_list

Specify the list of slice names.

Must be a string of 1-16 characters.

Default Value: session.

datastore_name

Specify the name of the datastore.

Must be a string of 1-16 characters.

Initiates syncing index with its remote peers.

Triggers remote sync for the list of index map IDs.

map index_map

Specify the trigger remote index sync for the index map.

Must be an integer.

Triggers remote sync for the list of slice names.

slice slice_name

Specify to trigger remote index sync for the slice name.

Must be a string.

Displays the index instances that are still syncing with the remote peers.

Clears all datastore sessions data.

db-name db_name

Specify the name of the DB to query.

Must be a string of 1-16 characters.

Default Value: session.

map-id map_id

Specify the map ID to query data from a map.

Must be an integer in the range of 0-1024.

Default Value: 0.

slice-name slice_name

Specify the slice name to query.

Must be a string of 1-16 characters.

Default Value: session.

Configures the filter parameters used for queries.

condition query_expression

Specify the query expression.

Must be one of the following:

• ends-with

• match

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the AND filter parameter used for queries.

condition query_expression

Specify the query expression in the AND filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the OR filter parameter used for queries.

condition query_expression

Specify the query expression in the OR filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures endpoint pod parameters.

copies-per-node copies_per_node

Specify copies of cdl-endpoint pods per node.

Must be an integer in the range of 1-4.

Default Value: 1.

cpu-limit max_cpu

Specify the maximum CPU allowed in milli CPU.

Must be an integer in the range of 200-32000.

Default Value: 4000.

cpu-request min_cpu

Specify the minimum CPU required in milli CPU.

Must be an integer in the range of 100-16000.

Default Value: 2000.

external-ip ipv4_address

Specify the list of IPv4 addresses to expose the service externally.

external-ip ipv6_address

Specify the list of IPv6 addresses to expose the service externally.

external-port port_number

Specify the port number to be exposed for external traffic.

Default Value: 8882.

go-debug go_debug_variables

Specify the comma-separated list of GO Debug variables.

Must be a string.

go-max-procs max_cpu

Specify the maximum number CPU cores used simultaneously.

Must be an integer in the range of 1-32.

Default Value: 4.

memory-limit max_memory

Specify the maximum memory allowed in megabytes.

Must be an integer in the range of 512-131072.

Default Value: 131072.

memory-request min_memory

Specify the minimum memory required in megabytes.

Must be an integer in the range of 256-65536.

Default Value: 256.

patch-url patch_url

Specify the URL to download the datastore application patch.

Must be a string.

replica ha_instances

Specify the number of HA instances to be created.

Must be an integer in the range of 1-16.

Default Value: 2.

This command is deprecated. Configures the CD endpoint parameters.

index-timeout-ms index_timeout

This keyword is deprecated. Specify the timeout period for index operations in milliseconds.

Must be an integer in the range of 25-5000.

Default Value: 200.

remote-ep-connection-count remote_ep_connection_count

This keyword is deprecated. Specify the number of connections to remote site CDL endpoint for GRPC replication.

Must be an integer in the range of 1-20.

Default Value: 4.

slot-timeout-ms slot_timeout

This keyword is deprecated. Specify the timeout period for slot operations in milliseconds.

Must be an integer in the range of 25-5000.

Default Value: 375.

Configures CDL Overload Protection configuration.

action index_overwrite_action

Specify the action to be performed on index overwrite detection.

Must be one of the following:

• delete-record

• log-record

• notify-record

key-prefix key_prefix

Specify the prefix pattern for unique keys for overwrite detection.

Must be a string.

Configures Geo Replication instance awareness configuration.

enable { false | true }

Specify whether to enable the instance state check for slices.

Must be one of the following:

• false

• true

Default Value: false.

Configures the mapping of systemID to sliceNames.

id system_id

Specify the system/site ID.

Must be an integer.

slice-names slice_names

Specify the list of slice names associated with the systemID.

Configures CDL Overload Protection configuration.

enable { false | true }

Specify to disable or enable Overload Protection.

Must be one of the following:

• false

• true

Default Value: false.

index-max-record-count index_max_record_count

Specify the maximum number of records that can be stored in the Index shard.

Must be an integer.

Must be an integer in the range of either 100-1000 or 100000-100000000

Default Value: 60000000.

enable { false | true }

Specify to disable or enable Overload Protection.

Must be one of the following:

• false

• true

Default Value: false.

index-max-record-count index_max_record_count

Specify the maximum number of records that can be stored in the Index shard.

Must be an integer.

slot-max-record-count slot_max_record_count

Specify the maximum number of records that can be stored in the Slot shard.

Must be an integer.

Must be an integer in the range of either 100-1000 or 100000-100000000

Default Value: 2500000.

critical-alert-threshold critical_alert_threshold

Specify the threshold in percentage at which CDL must trigger an alert cdlOverloaded-critical. major-alert-threshold must be less than critical-alert-threshold.

Must be an integer in the range of 40-100.

Default Value: 90.

enable { false | true }

Specify to disable or enable Overload Protection.

Must be one of the following:

• false

• true

Default Value: false.

hard-limit-percentage hard_limit_percentage

Specify the extra percentage of capacity in addition to the soft limit.

Must be an integer in the range of 0-10.

Default Value: 5.

index-max-record-count index_max_record_count

Specify the maximum number of records that can be stored in the Index shard.

Must be an integer.

major-alert-threshold major_alert_threshold

Specify the threshold in percentage at which CDL must trigger an alert cdlOverloaded-major. major-alert-threshold must be less than critical-alert-threshold.

Must be an integer in the range of 40-100.

Default Value: 80.

slot-max-record-count slot_max_record_count

Specify the maximum number of records that can be stored in the Slot shard.

Must be an integer.

slot-max-size slot_max_size

Specify the maximum size of the Slot shard in megabytes.

Must be an integer in the range of 1024-98304.

Default Value: 16384.

Configures the stale slot records detection parameters.

disable-auto-deletion { false | true }

Specify to disable or enable stale slot record auto deletion.

Must be one of the following:

• false

• true

Default Value: false.

notification-retry-count notification_retry_count

Specify the minimum number of timer expiry notification retries sent to an application without receiving an update from the application. If no update is received even after "notification-retry-count" number of times, CDL proceeds to check if slot record is stale.

Must be an integer in the range of 3-10.

Default Value: 3.

Configures index pod parameters.

cpu-limit max_cpu

Specify the maximum CPU allowed in milli CPU.

Must be an integer in the range of 200-32000.

Default Value: 4000.

cpu-request min_cpu

Specify the minimum CPU required in milli CPU.

Must be an integer in the range of 100-16000.

Default Value: 2000.

go-debug go_debug_variables

Specify the comma-separated list of GO Debug variables.

Must be a string.

go-max-procs max_cpu

Specify the maximum number CPU cores used simultaneously.

Must be an integer in the range of 1-32.

Default Value: 4.

map index_partitions

Specify the number of partitions to be created for index.

Must be an integer in the range of 1-1024.

Default Value: 1.

memory-limit max_memory

Specify the maximum memory allowed in megabytes.

Must be an integer in the range of 512-131072.

Default Value: 131072.

memory-request min_memory

Specify the minimum memory required in megabytes.

Must be an integer in the range of 256-65536.

Default Value: 256.

patch-url patch_url

Specify the URL to download the datastore application patch.

Must be a string.

replica replicas

Specify the number of HA instances to be created.

Must be an integer in the range of 1-2.

Default Value: 2.

write-factor write_factor

This keyword has been deprecated. Specify the number of copies to be written into the index before a successful response.

Must be an integer in the range of 0-2.

Default Value: 2.

Configures the Kafka for Geo Replication.

enable-JMX-metrics { false | true }

Specify to enable or disable JMX metrics.

Must be one of the following:

• false

• true

Default Value: true.

enable-persistence { false | true }

Specify to enable or disable persistence for the Kafka data.

Must be one of the following:

• false

• true

Default Value: false.

log-level

Specify the Kafka logging level. The logging levels include debug, error, fatal, info, trace, and warn. The changes specified here will trigger rolling restart of Zookeeper pods.

Must be one of the following:

• debug

• error

• fatal

• info

• trace

• warn

partition number_of_partitions

Specify the number of partitions per topic.

Must be an integer in the range of 1-1024.

Default Value: 1.

replica ha_instances

Specify the number of HA instances to be created.

Must be an integer in the range of 1-16.

Default Value: 2.

Default Value: 2.

retention-size retention_size

This keyword is deprecated. Specify the data retention size in MB.

Must be an integer in the range of 1024-1048576.

Default Value: 5120.

retention-time data_retention_period

Specify the data retention period in hours.

Must be an integer in the range of 1-168.

Default Value: 12.

storage data_storage_size

Specify the Kafaka data storage size in GB.

Must be an integer in the range of 1-64.

Default Value: 20.

to-earliest

Specify to enable parallel pod management policy.

Must be one of the following:

• false

• true

Default Value: false.

total-retention-size total_retention_size

Specify the data total retention size in MB.

Must be an integer in the range of 10240-1048576.

Default Value: 65536.

Describes the Kafka consumer groups. By default, it describes all the Kafka consumer groups.

Describes the Kafka consumer groups.

group name group_name

Specify the Kafka consumer group name.

Must be a string in the pattern [a-zA-Z0-9._-]+.

Describes the Kafka topics. By default, it describes all the topics that are not internal.

include-internal-topics

Specify whether to include internal Kafka topics.

topic kafka-topic_name

Specify the Kafka topic name.

Must be a string in the pattern [a-zA-Z0-9._-]+.

Configures the IPs that are exposed to the external servers.

ip IPv4_address

Specify the IPv4 address for the kafka server to listen for client traffic.

port port_number

Specify the port address to expose for external traffic.

ssl-port ssl-port_address

Specify the ssl-port address to expose for external traffic.

Configures label configuration for Kafka pods.

key label_key

Specify the label key.

Must be a string.

value label_value

Specify the label value.

Must be a string.

Shows all the kafka topics. By default, the list does not contain the internal topics.

Shows all the Kafka consumer groups.

Shows all the Kafka topics.

include-internal-topics

Specify whether to include internal Kafka topics.

Configures Kafka log compaction parameters.

delete-retention-ms delete_retention_period

Specify the period of time in miliseconds to retain deletes for log compacted topics.

Must be an integer in the range of 60000-172800000.

Default Value: 43200000.

disable { false | true }

Specify to disable or enable Kafka log compaction.

Must be one of the following:

• false

• true

Default Value: false.

Resets the offsets of all the topics of the Kafka consumer groups. The offset of a consumer group can be set only if the group is inactive.

Resets Kafka consumer group offset of all the topics.

consumer-group name group_name

Specify the Kafka consumer group.

Must be a string in the pattern [a-zA-Z0-9._-]+.

to-earliest

Specify to reset offsets to earliest.

to-earliest

Specify to reset offsets to latest.

Configures Kafka SSL settings.

disable-host-name-verification { false | true }

Specify to disable or enable host name verification during SSL communication between Kafka brokers.

Must be one of the following:

• false

• true

Default Value: false.

enable-ssl { false | true }

Specify to disable or enable SSL communication between Kafka brokers.

Must be one of the following:

• false

• true

Default Value: false.

Configures the verbosity level of metrics.

Configures the Kafka MirrorMaker.

enable-JMX-metrics { false | true }

Specify to enable or disable JMX metrics

Must be one of the following:

• false

• true

Default Value: true.

log-level { debug | error | fatal | info | trace | warn }

Specify the Kafka MirrorMaker logging level. NOTE: The changes trigger restart of the MirrorMaker pod

Must be one of the following:

• debug

• error

• fatal

• info

• trace

• warn

This command is deprecated. Configures CDL Overload Protection configuration.

disable { false | true }

This keyword is deprecated. Specify to disable or enable Overload Protection.

Must be one of the following:

• false

• true

Default Value: false.

Shows results of reset-offsets without executing changes on consumer groups.

Resets Kafka consumer group offset of all the topics.

consumer-group name group_name

Specify the Kafka consumer group.

Must be a string in the pattern [a-zA-Z0-9._-]+.

to-earliest

Specify to reset offsets to earliest.

to-earliest

Specify to reset offsets to latest.

Displays session index information.

all-replicas { false | true }

Specify whether to fetch index from all the replicas.

Must be one of the following:

• false

• true

Default Value: false.

db-name db_name

Specify the name of the DB to query.

Must be a string of 1-16 characters.

Default Value: session.

key key

Specify the key - query value (uk/pk).

Must be a string of 0-512 characters.

limit max_indexes

Specify the maximum number of indexes to display.

Must be an integer in the range of 1-1000.

map-id map_id

Specify the map ID to query data from a map where the index is stored.

Must be an integer in the range of 0-1024.

slice-name slice_name

Specify the slice name to query.

Must be a string of 1-16 characters.

Default Value: session.

Displays detailed session count information.

db-name db_name

Specify the name of the DB to query.

Must be a string of 1-16 characters.

Default Value: session.

map-id map_id

Specify the map ID to query data from a map.

Must be an integer in the range of 0-1024.

Default Value: 0.

slice-name slice_name

Specify the slice name to query.

Must be a string of 1-16 characters.

Default Value: session.

Configures the filter parameters used for queries.

condition query_expression

Specify the query expression.

Must be one of the following:

• ends-with

• match

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the AND filter parameter used for queries.

condition query_expression

Specify the query expression in the AND filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the OR filter parameter used for queries.

condition query_expression

Specify the query expression in the OR filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Displays summary session count information.

db-name db_name

Specify the name of the DB to query.

Must be a string of 1-16 characters.

Default Value: session.

map-id map_id

Specify the map ID to query data from a map.

Must be an integer in the range of 0-1024.

Default Value: 0.

slice-name slice_name

Specify the slice name to query.

Must be a string of 1-16 characters.

Default Value: session.

Configures the filter parameters used for queries.

condition query_expression

Specify the query expression.

Must be one of the following:

• ends-with

• match

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the AND filter parameter used for queries.

condition query_expression

Specify the query expression in the AND filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the OR filter parameter used for queries.

condition query_expression

Specify the query expression in the OR filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Displays session details with data.

db-name db_name

Specify the name of the DB to query.

Must be a string of 1-16 characters.

Default Value: session.

limit number_of_records

Specify the maximum number of records to display.

Must be an integer in the range of 1-500.

Default Value: 100.

map-id map_id

Specify the map ID to query data from a map.

Must be an integer in the range of 0-1024.

Default Value: 0.

max-data-size-kb max_data_size

Specify the maximum data size to display per record. If the data size is greater than this parameter, the output is truncated.

Must be an integer in the range of 1-32.

Default Value: 4.

next-eval-end-time next_eval_end_time

Sessions that have next-eval-time less than this time.

next-eval-start-time next_eval_start_time

Sessions that have next-eval-time greater than this time.

purge-on-eval { false | true }

Sessions that have purge-on-eval flag set to false or true.

Must be one of the following:

• false

• true

slice-name slice_name

Specify the slice name to query.

Must be a string of 1-16 characters.

Default Value: session.

Configures the AND filter parameter used for queries.

condition query_expression

Specify the query expression in the AND filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the OR filter parameter used for queries.

condition query_expression

Specify the query expression in the OR filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Displays session details without data.

db-name db_name

Specify the name of the DB to query.

Must be a string of 1-16 characters.

Default Value: session.

limit number_of_records

Specify the maximum number of records to display.

Must be an integer in the range of 1-500.

Default Value: 100.

map-id map_id

Specify the map ID to query data from a map.

Must be an integer in the range of 0-1024.

Default Value: 0.

max-data-size-kb max_data_size

Specify the maximum data size to display per record. If the data size is greater than this parameter, the output is truncated.

Must be an integer in the range of 1-32.

Default Value: 4.

next-eval-end-time next_eval_end_time

Sessions that have next-eval-time less than this time.

next-eval-start-time next_eval_start_time

Sessions that have next-eval-time greater than this time.

purge-on-eval { false | true }

Sessions that have purge-on-eval flag set to false or true.

Must be one of the following:

• false

• true

slice-name slice_name

Specify the slice name to query.

Must be a string of 1-16 characters.

Default Value: session.

Configures the AND filter parameter used for queries.

condition query_expression

Specify the query expression in the AND filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Configures the OR filter parameter used for queries.

condition query_expression

Specify the query expression in the OR filter.

Must be one of the following:

• contains

• ends-with

• match

• not-contains

• not-ends-with

• not-match

• not-starts-with

• starts-with

key query_string

Specify the query string.

Must be a string of 0-512 characters.

Displays CDL status information.

db-name db_name

Specify the name of the database.

Must be a string.

Default Value: session.

Configures slot pod parameters.

cpu-limit max_cpu

Specify the maximum CPU allowed in milli CPU.

Must be an integer in the range of 200-32000.

Default Value: 4000.

cpu-request min_cpu

Specify the minimum CPU required in milli CPU.

Must be an integer in the range of 100-16000.

Default Value: 2000.

go-debug go_debug_variables

Specify the comma-separated list of GO Debug variables.

Must be a string.

go-max-procs max_cpu

Specify the maximum number CPU cores used simultaneously.

Must be an integer in the range of 1-32.

Default Value: 4.

map slot_partitions

Specify the number of partitions to be created for slot.

Must be an integer in the range of 1-1024.

Default Value: 1.

memory-limit max_memory

Specify the maximum memory allowed in megabytes.

Must be an integer in the range of 512-131072.

Default Value: 131072.

memory-request min_memory

Specify the minimum memory required in megabytes.

Must be an integer in the range of 256-65536.

Default Value: 256.

patch-url patch_url

Specify the URL to download the datastore application patch.

Must be a string.

replica ha_instances

Specify the number of HA instances to be created.

Must be an integer in the range of 1-4.

Default Value: 2.

write-factor write_factor

Specify the number of copies to be written into slot before a successful response.

Must be an integer in the range of 1-4.

Default Value: 2.

Configures notification configuration towards application.

connection-count connection_count

Specify the Notification connections to the application notification endpoint.

Must be an integer in the range of 1-20.

Default Value: 4.

dynamic-provisioning { false | true }

Specify whether notification endpoint is provisioned by application or to use static config. If true, dynamic provisioning is enabled.

Must be one of the following:

• false

• true

Default Value: false.

host host_name

Specify the notification server's host name.

Must be a string.

Default Value: datastore-notification-ep.

include-conflict-data { false | true }

Specify to enable the setting to receive the original data and the data from the request along with the DB conflict notification.

Must be one of the following:

• false

• true

Default Value: false.

limit notification_tps

Specify the notification server's transactions per second (TPS).

Must be an integer in the range of 1-2000.

Default Value: 200.

max-concurrent-bulk-notifications max_notifications

Specify the maximum number of bulk task notifications that CDL can process concurrently.

Must be an integer in the range of 1-20.

Default Value: 1.

notification-retry-seconds notification_retry_interval

Specify the number of seconds after which the CDL will retry notification to application, if the application does not update next eval time post timer expiry notification.

Must be an integer in the range of 10-100.

Default Value: 10.

port notification_server_port

Specify the notification server's port number.

Default Value: 8890.

remote-system-id remote_system_id

Specify the list of remote System IDs. Notification will be sent from the CDL if a record has owner system ID which matches one of the remote IDs.

use-stream { false | true }

Specify to enable streaming for sending notifications from CDL to the application.

Must be one of the following:

• false

• true

Default Value: false.

Configures the CDL slot metrics parameters.

report-idle-session-type { false | true }

Specify whether to report idle session types.

Must be one of the following:

• false

• true

Default Value: false.

Configures the Zookeeper for Geo Replication.

data-storage-size data_storage_size

Specify the Zookeeper data storage size in GB.

Must be an integer in the range of 1-64.

Default Value: 20.

enable-JMX-metrics { false | true }

Specify to enable or disable JMX metrics.

Must be one of the following:

• false

• true

Default Value: true.

enable-persistence { false | true }

Specify to enable or disable persistence for Zookeeper data.

Must be one of the following:

• false

• true

Default Value: false.

log-level

Specify the Zookeeper logging level. The logging levels include debug, error, fatal, info, trace, and warn. The changes specified here will trigger rolling restart of Zookeeper pods.

Must be one of the following:

• debug

• error

• fatal

• info

• trace

• warn

log-storage-size log_storage_size

Specify the Zookeeper data log storage size in GB.

Must be an integer in the range of 1-64.

Default Value: 20.

replica ha_instances

Specify the number of HA instances to be created.

Must be an integer from the following: 1, 3.

Default Value: 3.

to-earliest

Specify to enable parallel pod management policy.

Must be one of the following:

• false

• true

Default Value: false.

Configures the list of label configuration for CDL pods.

label_config_name

Specify the label configuration name.

Must be a string.

Configures endpoint label configuration.

key label_key

Specify the label key.

Must be a string.

value label_value

Specify the label value.

Must be a string.

Configures map-level label configuration for CDL index.

key label_key

Specify the label key.

Must be a string.

map-id map_id

Specify the map-based label configuration.

Must be an integer.

value label_value

Specify the label value.

Must be a string.

Configures map-level label configuration for CDL slot.

key label_key

Specify the label key.

Must be a string.

map-id map_id

Specify the map-based label configuration.

Must be an integer.

value label_value

Specify the label value.

Must be a string.

Configures the CDL logging parameters.

default-log-level default_log_level

Specify the default logging level for the CDL modules.

Must be one of the following:

• debug

• error

• info

• off

• trace

• warn

Default Value: warn.

error-stack { false | true }

Specify to enable or disable the stack trace along with error logs. To enable, set to true.;

Must be one of the following:

• false

• true

Default Value: false.

json-logging { false | true }

Specify to enable or disable logging in json format.

Must be one of the following:

• false

• true

Default Value: false.

sync-logging { false | true }

Specify to enable or disable synchronous logging. To enable, set to true.

Must be one of the following:

• false

• true

Default Value: false.

Configures logs for each module.

level default_log_level

Specify the logging level for each module.

Must be one of the following:

• debug

• error

• info

• off

• trace

• warn

cdl_module_name

Specify the name of the CDL module.

Must be a string.

Configures the list of remote sites.

system_id

Specify the remote system or site identity.

Must be an integer.

Configures the list of remote DB endpoints.

host host_name

Specify the remote DB endpoint's hostname or IP address.

Must be a string of 1-64 characters.

port port_number

Specify the remote DB endpoint's port number.

Configures the list of Kafka servers.

ssl-port ssl_port_number

Specify the SSL port exposed by remote Kafka Broker.

host_name

Specify the host name or IP address of the remote Kafka server.

Must be a string of 1-64 characters.

port_number

Specify the remote Kafaka server's port number.

Configures SSL configuration parameters.

enable { false | true };

Specify to enable or disable SSL configuration.

Must be one of the following:

• false

• true

Default Value: false.

Configures database endpoint specific SSL configuration parameters.

host hostname_ip_address

Specify the hostname or IP address of external host.

Must be a string.

ssl-ca ssl_ca

Specify the CA certificate file content.

ssl-crt ssl_cert_file

Specify the SSL Cert file.

ssl-key ssl_key_file

Specify the SSL key file.