Mobile Services Repository Commands

deployment add config

Configures the cluster name and unified API external IP parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

deployment add config { cluster-name cluster_name | port port_number | unified-api-external-ip ip_address }

cluster-name cluster_name

Specify the cluster name.

Must be a string.

unified-api-external-ip ip_address

Specify the external IP address of the unified API service.

Must be an IP address.

port port_number

Specify the external port number of the unified API service.

Must be a port number.

Usage Guidelines

Use this command to configure the cluster name and unified API external IP parameters.

deployment remove-config

Removes the configuration file.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec

Syntax

deployment remove-config

Usage Guidelines

Use this command to remove the configuration file.

deployment show-config

Displays configuration information.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec

Syntax

deployment show-config

Usage Guidelines

Use this command to view the configuration information.

group nf-mgmt

Configures the NF management group parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nf-mgmt group_name nrf-mgmt-group registerGroup { nrf-mgmt-group mgmt_group_name | api-version api_version | locality group_locality }

group_name

Specify the group name.

Must be a string.

nrf-mgmt-group mgmt_group_name

Specify the NRF management group name.

api-version api_version

Specify the NF Management Service API version supported by the NRF.

Must be one of the following:

  • 1.0.0

  • 1.0.2

Default Value: 1.0.0.

locality group_locality

Specify the NRF group locality.

Must be a string.

Usage Guidelines

Use this command to enter the NRF management group configuration.

group nf-mgmt failover

Configures the failover SLA parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

failover group nf-mgmt group_name failover sla failover_sla

failover_sla

Specify the failover SLA value in milliseconds.

Must be an integer.

Usage Guidelines

Use this command to configure the failover SLA parameters.

group nf-mgmt reconnect

Configures the reconnect interval.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

reconnect interval reconnect_interval

reconnect_interval

Specify the reconnect interval in milliseconds.

Must be an integer.

Usage Guidelines

Use this command to configure the reconnect interval.

group nrf discovery

Configures NRF discovery group parameters.

Privilege Level

Security Administrator, Administrator

Syntax

group nrf discovery group_name

group_name

Specify the discovery group name.

Must be a string.

Usage Guidelines

Use this command to configure NRF discovery group parameters. Enters the NRF Discovery Configuration mode.

group nrf discovery service type nrf

Configures the NRF discovery service type.

Privilege Level

Security Administrator, Administrator

Syntax

group nrf discovery group_name service type nrf nnrf-disc service_type

service_type

Specify the NRF discovery service type.

Must be nnrf-disc.

Usage Guidelines

Use this command to configure the NRF discovery service type.

group nrf discovery service type nrf endpoint-profile

Configures the endpoint profile parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { capacity endpoint_capacity | priority endpoint_priority | api-uri-prefix api_uri_prefix | api-root api_string | api-root api_string | uri-scheme uri_scheme  }

name endpoint_profile_name

Specify the endpoint profile name.

Must be a string.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Default Value: 10.

priority endpoint_priority

Specify the endpoint's priority.

Must be an integer.

Default Value: 1.

api-uri-prefix api_uri_prefix

Specify the API URI prefix. If not configured, it takes the standard API name for the service as per the specification.

Must be a string.

api-root api_string

Specify the deployment-specific service API prefix that is used within the { apiRoot }.

Must be a string.

uri-scheme uri_scheme

Specify the URI scheme.

Must be one of the following:

  • http

  • https

Usage Guidelines

Use this command to configure the endpoint profile parameters.

group nrf discovery service type nrf endpoint-profile endpoint-name

Configures endpoint name.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { priority endpoint_priority | capacity endpoint_capacity }

name endpoint_name

Specify the endpoint name.

Must be a string.

priority endpoint_priority

Specify the priority for the service to select the appropriate profile using the load-balancing logic.

Must be an integer.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Usage Guidelines

Use this command to configure the endpoint name.

group nrf discovery service type nrf endpoint-profile endpoint-name primary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

group nrf discovery service type nrf endpoint-profile endpoint-name secondary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

group nrf discovery service type nrf endpoint-profile endpoint-name tertiary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

group nrf discovery service type nrf endpoint-profile version uri-version

Configures the URI version.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name version uri_version full-version full_version

uri_version

Specify the URI version.

Must be a string in the pattern 'v\d'.

full-version full_version

Specify the full URI version in the format major-version .minor-version .patch-version .[alpha-draft-number ].

Must be a string.

Usage Guidelines

Use this command to configure the URI version.

group nrf mgmt

Configures the NRF management group parameters.

Privilege Level

Security Administrator, Administrator

Syntax

group nrf mgmt mgmt_group_name

mgmt_group_name

Specify the management group name.

Must be a string.

Usage Guidelines

Use this command to configure the NRF management group parameters.

group nrf mgmt service type nrf

Configures the NRF management service type.

Privilege Level

Security Administrator, Administrator

Syntax

group nrf mgmt group_name service type nrf service_name

service_name

Specify the service name.

Must be nnrf-nfm.

Usage Guidelines

Use this command to configure the NRF management service type.

group nrf mgmt service type nrf endpoint-profile

Configures the endpoint profile parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { capacity endpoint_capacity | priority endpoint_priority | api-uri-prefix api_uri_prefix | api-root api_string | api-root api_string | uri-scheme uri_scheme  }

name endpoint_profile_name

Specify the endpoint profile name.

Must be a string.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Default Value: 10.

priority endpoint_priority

Specify the endpoint's priority.

Must be an integer.

Default Value: 1.

api-uri-prefix api_uri_prefix

Specify the API URI prefix. If not configured, it takes the standard API name for the service as per the specification.

Must be a string.

api-root api_string

Specify the deployment-specific service API prefix that is used within the { apiRoot }.

Must be a string.

uri-scheme uri_scheme

Specify the URI scheme.

Must be one of the following:

  • http

  • https

Usage Guidelines

Use this command to configure the endpoint profile parameters.

group nrf mgmt service type nrf endpoint-profile endpoint-name

Configures endpoint name.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { priority endpoint_priority | capacity endpoint_capacity }

name endpoint_name

Specify the endpoint name.

Must be a string.

priority endpoint_priority

Specify the priority for the service to select the appropriate profile using the load-balancing logic.

Must be an integer.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Usage Guidelines

Use this command to configure the endpoint name.

group nrf mgmt service type nrf endpoint-profile endpoint-name primary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

group nrf mgmt service type nrf endpoint-profile endpoint-name secondary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

group nrf mgmt service type nrf endpoint-profile endpoint-name tertiary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

group nrf mgmt service type nrf endpoint-profile version uri-version

Configures the URI version.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name version uri_version full-version full_version

uri_version

Specify the URI version.

Must be a string in the pattern 'v\d'.

full-version full_version

Specify the full URI version in the format major-version .minor-version .patch-version .[alpha-draft-number ].

Must be a string.

Usage Guidelines

Use this command to configure the URI version.

profile nf-client nf-type bsf bsf-profile

Configures the BSF profile parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

profile nf-client nf-type bsf bsf-profile bsf_profile

bsf_profile_name

Specify the BSF profile name.

Must be a string.

Usage Guidelines

Use this command to configure the BSF profile parameters.

profile nf-client nf-type bsf bsf-profile locality

Configures the locality parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

nf-client nf-type bsf profile nf-client nf-type bsf bsh-profile bsf_profile locality locality

locality_name

Specify the locality name.

Must be a string.

priority locality_priority

Specify the locality priority.

Must be an integer.

Default Value: 65535.

Usage Guidelines

Use this command to configure the locality parameters.

profile nf-client nf-type bsf bsf-profile locality service name type

Configures the BSF service type.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

profile nf-client nf-type bsf chf-profile profile_name locality locality { priority priority | service service_name type service_type }

type service_type

Specify the service type.

Must be nbsf-management.

Usage Guidelines

Use this command to configure the BSF service type.

profile nf-client nf-type bsf bsf-profile locality service name type endpoint-profile

Configures the endpoint profile parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { capacity endpoint_capacity | priority endpoint_priority | api-uri-prefix api_uri_prefix | api-root api_string | api-root api_string | uri-scheme uri_scheme  }

name endpoint_profile_name

Specify the endpoint profile name.

Must be a string.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Default Value: 10.

priority endpoint_priority

Specify the endpoint's priority.

Must be an integer.

Default Value: 1.

api-uri-prefix api_uri_prefix

Specify the API URI prefix. If not configured, it takes the standard API name for the service as per the specification.

Must be a string.

api-root api_string

Specify the deployment-specific service API prefix that is used within the { apiRoot }.

Must be a string.

uri-scheme uri_scheme

Specify the URI scheme.

Must be one of the following:

  • http

  • https

Usage Guidelines

Use this command to configure the endpoint profile parameters.

profile nf-client nf-type bsf bsf-profile locality service name type endpoint-profile endpoint-name

Configures endpoint name.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { priority endpoint_priority | capacity endpoint_capacity }

name endpoint_name

Specify the endpoint name.

Must be a string.

priority endpoint_priority

Specify the priority for the service to select the appropriate profile using the load-balancing logic.

Must be an integer.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Usage Guidelines

Use this command to configure the endpoint name.

profile nf-client nf-type bsf bsf-profile locality service name type endpoint-profile endpoint-name primary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type bsf bsf-profile locality service name type endpoint-profile endpoint-name secondary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type bsf bsf-profile locality service name type endpoint-profile endpoint-name tertiary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type bsf bsf-profile locality service name type endpoint-profile version uri-version

Configures the URI version.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name version uri_version full-version full_version

uri_version

Specify the URI version.

Must be a string in the pattern 'v\d'.

full-version full_version

Specify the full URI version in the format major-version .minor-version .patch-version .[alpha-draft-number ].

Must be a string.

Usage Guidelines

Use this command to configure the URI version.

profile nf-client nf-type chf chf-profile

Configures the locality for the UDR profile.

Privilege Level

Security Administrator, Administrator

Syntax

profile nf-client nf-type chf chf-profile chf_profile

chf_profile_name

Specify the CHF profile name.

Must be a string.

Usage Guidelines

Use this command to configure the locality for the CHF profile.

profile nf-client nf-type chf chf-profile locality

Configures the locality for the CHF profile.

Privilege Level

Security Administrator, Administrator

Syntax

nf-client nf-type chf profile nf-client nf-type chf chf-profile chf_profile locality locality

locality_name

Specify the locality name.

Must be a string.

priority priority

Specify the priority for the CHF local configuration."

Must be an integer.

Default Value: 65535.

Usage Guidelines

Use this command to configure the locality for the CHF profile.

profile nf-client nf-type chf chf-profile locality service name type

Configures the CHF service type.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

profile nf-client nf-type chf chf-profile profile_name locality locality { priority priority | service service_name type service_type }

type service_type

Specify the CHF service type.

Must be nchf-spendinglimitcontrol.

Usage Guidelines

Use this command to configure the CHF service type.

profile nf-client nf-type chf chf-profile locality service name type endpoint-profile

Configures the endpoint profile parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { capacity endpoint_capacity | priority endpoint_priority | api-uri-prefix api_uri_prefix | api-root api_string | api-root api_string | uri-scheme uri_scheme  }

name endpoint_profile_name

Specify the endpoint profile name.

Must be a string.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Default Value: 10.

priority endpoint_priority

Specify the endpoint's priority.

Must be an integer.

Default Value: 1.

api-uri-prefix api_uri_prefix

Specify the API URI prefix. If not configured, it takes the standard API name for the service as per the specification.

Must be a string.

api-root api_string

Specify the deployment-specific service API prefix that is used within the { apiRoot }.

Must be a string.

uri-scheme uri_scheme

Specify the URI scheme.

Must be one of the following:

  • http

  • https

Usage Guidelines

Use this command to configure the endpoint profile parameters.

profile nf-client nf-type chf chf-profile locality service name type endpoint-profile endpoint-name

Configures endpoint name.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { priority endpoint_priority | capacity endpoint_capacity }

name endpoint_name

Specify the endpoint name.

Must be a string.

priority endpoint_priority

Specify the priority for the service to select the appropriate profile using the load-balancing logic.

Must be an integer.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Usage Guidelines

Use this command to configure the endpoint name.

profile nf-client nf-type chf chf-profile locality service name type endpoint-profile endpoint-name primary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type chf chf-profile locality service name type endpoint-profile endpoint-name secondary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type chf chf-profile locality service name type endpoint-profile endpoint-name tertiary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type chf chf-profile locality service name type endpoint-profile version uri-version

Configures the URI version.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name version uri_version full-version full_version

uri_version

Specify the URI version.

Must be a string in the pattern 'v\d'.

full-version full_version

Specify the full URI version in the format major-version .minor-version .patch-version .[alpha-draft-number ].

Must be a string.

Usage Guidelines

Use this command to configure the URI version.

profile nf-client nf-type udr udr-profile locality

Configures the locality for the UDR profile.

Privilege Level

Security Administrator, Administrator

Syntax

profile nf-client nf-type udr udr-profile udr_profile locality locality [ priority priority | service udr_service ]

udr-profile udr_profile_name

Specify the UDR profile name."

Must be a string.

priority priority

Specify the priority for the UDR local configuration."

Must be an integer.

Usage Guidelines

Use this command to configure the locality for the UDR profile.

profile nf-client nf-type udr udr-profile locality service name type

Configures UDR service type.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

profile nf-client nf-type udr udr-profile profile_name locality locality { priority priority | service service_name type service_type }

type service_type

Specify the service type.

Must nudr-dr.

Usage Guidelines

Use this command to configure the UDR service type.

profile nf-client nf-type udr udr-profile locality service name type endpoint-profile

Configures the endpoint profile parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { capacity endpoint_capacity | priority endpoint_priority | api-uri-prefix api_uri_prefix | api-root api_string | api-root api_string | uri-scheme uri_scheme  }

name endpoint_profile_name

Specify the endpoint profile name.

Must be a string.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Default Value: 10.

priority endpoint_priority

Specify the endpoint's priority.

Must be an integer.

Default Value: 1.

api-uri-prefix api_uri_prefix

Specify the API URI prefix. If not configured, it takes the standard API name for the service as per the specification.

Must be a string.

api-root api_string

Specify the deployment-specific service API prefix that is used within the { apiRoot }.

Must be a string.

uri-scheme uri_scheme

Specify the URI scheme.

Must be one of the following:

  • http

  • https

Usage Guidelines

Use this command to configure the endpoint profile parameters.

profile nf-client nf-type udr udr-profile locality service name type endpoint-profile endpoint-name

Configures endpoint name.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name { priority endpoint_priority | capacity endpoint_capacity }

name endpoint_name

Specify the endpoint name.

Must be a string.

priority endpoint_priority

Specify the priority for the service to select the appropriate profile using the load-balancing logic.

Must be an integer.

capacity endpoint_capacity

Specify the node capacity for the endpoint.

Must be an integer.

Usage Guidelines

Use this command to configure the endpoint name.

profile nf-client nf-type udr udr-profile locality service name type endpoint-profile endpoint-name primary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type udr udr-profile locality service name type endpoint-profile endpoint-name secondary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type udr udr-profile locality service name type endpoint-profile endpoint-name tertiary ip-address

Configures the IP address and port parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile endpoint-name endpoint_name { primary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | secondary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] | tertiary ip-address [ ipv4 ipv4_address | ipv6 ipv6_address | port port_number ] }

ipv4 ipv4_address

Specify the IPv4 address.

Must be an IPv4 address.

ipv6 ipv6_address

Specify the IPv6 address.

Must be an IPv6 address.

fqdn fqdn

Specify the fully qualified domain name.

Must be a string.

port port_number

Specify the port number.

Must be a port number.

Usage Guidelines

Use this command to configure the IP address and port parameters.

profile nf-client nf-type udr udr-profile locality service name type endpoint-profile version uri-version

Configures the URI version.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

group nrf discovery discovery_group service type nrf nnrf-disc endpoint-profile endpoint_profile_name version uri_version full-version full_version

uri_version

Specify the URI version.

Must be a string in the pattern 'v\d'.

full-version full_version

Specify the full URI version in the format major-version .minor-version .patch-version .[alpha-draft-number ].

Must be a string.

Usage Guidelines

Use this command to configure the URI version.

profile nf-pair nf-type

Configures the NF type for the NF client pair configuration.

Privilege Level

Security Administrator, Administrator

Syntax

profile nf-pair nf-type nf_type nrf-discovery-group group_name { subscription-enabled { false | true } | subscription-enabled { false | true } | subscription-extension extension_duration }

nf_type

Specifiy the NF type.

Must be one of the following:

  • UDR

  • CHF

  • BSF

nrf-discovery-group group_name

Specifiy the NRF discovery group name.

subscription-enabled { false | true }

Specifiy to enable or disable the subscription to NRF for NF change.

Must be either "false" or "true".

Default Value: false.

subscription-extension extension_duration

Specify the duration for which the subscription must be extended in minutes.

Must be an integer.

Default Value: 60.

Usage Guidelines

Use this command to configure the NF type for the NF client pair configuration.

profile nf-pair nf-type locality

Configures the locality parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

profile nf-pair nf-type nf_type nrf-discovery-group group_name locality [ client client_locality | preferred-server preferred_server | geo-server geo_server ]

client client_locality

Specify the locality of the client.

preferred-server preferred_server_locality

Specify the preferred server locality information.

Must be a string.

geo-server geo_service_locality

Specify the geo-server locality information.

Must be a string.

Usage Guidelines

Use this command to configure the locality parameters.

rest discover-cache chf

Displays PCF Discover cache for CHF.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

show discover-cache chf

nf_type

Specify the NF type.

Must be a string.

chf_instance_id

Specify the CHF instance ID.

Must be a string.

nf_status

Specify whether the PCF instance is registered to the NRF.

Must be a string.

ipv4_address

Specify the CHF IPv4 address.

Must be a string.

port_number

Specify the CHF port number.

Must be a port number.

expiry_duration

Specify the expiry period in seconds.

Must be a string.

Usage Guidelines

Use this command to view PCF Discover cache for CHF.

rest discover-cache udr

Displays PCF Discover cache for UDR.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

show discover-cache udr

nf_type

Specify the NF type.

Must be a string.

chf_instance_id

Specify the CHF instance ID.

Must be a string.

nf_status

Specify whether the PCF instance is registered to the NRF.

Must be a string.

ipv4_address

Specify the CHF IPv4 address.

Must be a string.

port_number

Specify the CHF port number.

Must be a port number.

expiry_duration

Specify the expiry period in seconds.

Must be a string.

Usage Guidelines

Use this command to view PCF Discover cache for UDR.

rest registration-status

Displays the NRF's registration status.

Privilege Level

Security Administrator, Administrator

Syntax

show rest registration-status

ip_address

Displays the PCF pod IP address.

Must be a string.

registered { false | true }

Displays the registration status of the NRF instance.

Must be a string.

NRF URI ID

Displays the registered NRF URI.

Must be a string.

Usage Guidelines

Use this command to display the NRF's registration status.

Example

The following command configures the traffic steering: 
traffic engine default-destination test

service-registration profile

Configures the network function profile parameters to enable discovery of the registered NFs, and when the discovery fails, the discovery is attempted on the local configuration.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration profile { allowed-plmns { mcc | mnc } | capacity profile_capacity | fqdn fqdn | instance-id instance_id_pcf | locality pcf_location | nf-status nf_service_status | pcf-info { dnn-list | supi-ranges } | plmn-list { mcc | mnc }  | priority profile_priority | snssais { sst | sd sd } }

instance-id pcf_instance_id

Specify the PCF instance ID.

Must be a string.

locality pcf_location

Specify the location of the PCF.

Must be a string.

capacity profile_capacity

Specify the PCFs profile's capacity.

Must be an integer.

fqdn fqdn

Specify the FQDN address of the PCF.

Must be an integer.

priority profile_priority

Specify the PCF profile's priority.

Must be an integer.

nf_service_status

Specify the PCF service status.

Must be one of the following:

  • REGISTERED

  • UNDISCOVERABLE

Default Value: REGISTERED.

Usage Guidelines

Use this command to configure the network function profile.

service-registration profile allowed-plmns

Configures PLMNs allowed to access the network function.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration profile allowed-plmns { mcc | mnc }

mcc

Specify the Mobile Country Code.

Must be a string.

mnc

Specify the Mobile Network Code.

Must be a string.

Usage Guidelines

Use this command to configure PLMNs allowed to access the network function.

service-registration profile pcf-info

Configures the PCF parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration profile pcf-info { dnn-list dnn_list_name | supi-ranges supi_range_id [ start start_value | pattern range_pattern | end end_value ] }

dnn_list

Specify the DNNs supported by the PCF.

Must be a string.

Usage Guidelines

Use this command to configure PCF parameters.

service-registration profile pcf-info supi-ranges

Configures the list of SUPI ranges, which the PCF instance serves.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration profile pcf-info supi-ranges supi_range_id [ start start_value | pattern range_pattern | end end_value ]

supi_range_id

Specify the SUPI range identifier.

Must be a string.

start start_value

Specify the first value of the SUPI range.

Must be a string in the pattern '[0-9]+'.

end end_value

Specify the last value of the SUPI range.

Must be a string in the pattern '[0-9]+'.

pattern range_pattern

Specify the regular expression according to the ECMA-262 dialect that represents the set of SUPIs belonging to the specified range.

Must be a string.

Usage Guidelines

Use this command to configure the list of SUPI ranges, which the PCF instance serves.

service-registration profile plmn-list

Configures the PLMNs of the network function.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration profile plmn-list { mcc | mnc }

mcc

Specify the Mobile Country Code.

Must be a string.

mnc

Specify the Mobile Network Code.

Must be a string.

Usage Guidelines

Use this command to configure the PLMNs of the network function.

service-registration profile snssais

Configures the S-NSSAIs of the network function.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration profile snssais { sst | sd sd }

sst

Specify the Slice or Service Types value.

Must be an integer.

sd sd

Specify the Slice Differentiator value.

Must be a string.

Usage Guidelines

Use this command to configure the S-NSSAIs of the network function.

service-registration services

Configures the service parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration services services_name

service_name

Specify the service name.

Must be one of the following:

  • amfService

  • smfService

api-version api_version

Specify the API version.

Must be one of the following:

  • 1.0.0

  • 1.0.2

Default Value: 1.0.0.

Usage Guidelines

Use this command to configure the service parameters.

service-registration services allowed-nssais

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration services service_name allowed-nssais { sst | sd sd }

sst

Specify the Slice or Service Types value.

Must be an integer.

sd sd

Specify the Slice Differentiator value.

Must be a string.

Usage Guidelines

Use this command to configure the allowed NSSAIs.

service-registration services allowed-plmns

Configures the PLMN parameters.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec > Global Configuration

Syntax

service-registration services service_name allowed-plmns { mcc | mnc }

mcc

Specify the Mobile Country Code.

Must be a string.

mnc

Specify the Mobile Network Code.

Must be a string.

Usage Guidelines

Use this command to configure the PLMN parameters.

subscriber session

Displays subscriber session information.

Privilege Level

Security Administrator, Administrator

Command Mode

Exec

Syntax

subscriber session [ imsi imsi | msisdn msisdn ]

imsi imsi

Specify the IMSI.

Must be a string.

msisdn msisdn

Specify the MSISDN.

Must be a string.

Usage Guidelines

Use this command to view subscriber session information.