The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configures the list of external datastore endpoints.
Exec > Global Configuration
datastore external-endpoints external_endpoint Specify the external datastore endpoints.
Use this command to configure the list of external datastore endpoints.
Configures the connection setting parameters.
Exec > Global Configuration
connection-settings { channel channel_count | keep-alive { keep-alive-time-ms keep_alive_time | keep-alive-timeout-ms keep_alive_timeout } | timeout-ms timeout_in_ms | port port_number | rating rating } Specify the timeout period in milliseconds.
Must be an integer.
Specify the number of parallel gRPC channels to open towards each datastore endpoint.
Must be an integer.
Specify the idle timeout in milliseconds, after which keepalive notification is sent.
Must be an integer.
Specify the idle timeout period in milliseconds, after which keepalive probe is initiated.
Must be an integer.
Specify the timeout period in milliseconds.
Must be an integer.
Specify the port number.
Must be an integer.
Specify the rating for the datastore endpoint (higher the better).
Must be an integer.
Default Value: 0.
Use this command to configure connection settings.
Configures the number of parallel gRPC channels to open towards each datastore endpoint.
Exec > Global Configuration
connection-settings channel count channel_count Specify the number of parallel gRPC channels to open towards each datastore endpoint.
Must be an integer.
Use this command to configure the number of parallel gRPC channels to open towards each datastore endpoint.
datastore external-endpoints sample1 connection-settings channel count 10 Configures keep-alive parameters.
Exec > Global Configuration
connection-settings keep-alive { keep-alive-time-ms keep_alive_time | keep-alive-timeout-ms keep_alive_timeout } Specify the idle timeout in milliseconds, after which keepalive notification is sent.
Must be an integer.
Specify the idle timeout period in milliseconds, after which keepalive probe is initiated.
Must be an integer.
Use this command to configure the keep-alive parameters.
Configures the primary (cluster local) datastore parameters.
Exec > Global Configuration
primary-endpoint connection-settings { channel channel_count | keep-alive { keep-alive-time-ms keep_alive_time| keep-alive-timeout-ms keep_alive_timeout | timeout-ms } | timeout-ms timeout_in_ms } Specify the number of parallel gRPC channels to open towards each datastore endpoint.
Must be an integer.
Specify the idle timeout in milliseconds, after which keepalive notification is sent.
Must be an integer.
Specify the idle timeout period in milliseconds, after which keepalive probe is initiated.
Must be an integer.
Specify the timeout period in milliseconds.
Must be an integer.
Use this command to configure the primary datastore configuration.
Configures the datastore connection settings.
Exec > Global Configuration
connection-settings { channel channel_count | keep-alive | timeout-ms timeout_ms } Specify the number of parallel gRPC channels to open towards each datastore endpoint.
Must be an integer.
Specify the timeout period in milliseconds.
Must be an integer.
Use this command to configure the datastore connection settings.
Configures the number of parallel gRPC channels to open towards each datastore endpoint.
Exec > Global Configuration
connection-settings channel count channel_count Specify the number of parallel gRPC channels to open towards each datastore endpoint.
Must be an integer.
Use this command to configure the number of parallel gRPC channels to open towards each datastore endpoint.
datastore external-endpoints sample1 connection-settings channel count 10 Configures keep-alive parameters.
Exec > Global Configuration
keep-alive { keep-alive-time-ms keep_alive_time | keep-alive-timeout-ms keep_alive_timeout } Specify the idle timeout in milliseconds, after which keepalive notification is sent.
Must be an integer.
Specify the idle timeout period in milliseconds, after which keepalive probe is initiated.
Must be an integer.
Use this command to configure the keep-alive parameters.
Feedback