Notification and Alert
Architectural Overview
Major Components
Technical Architecture
Protocols
SNMP Object Identifier and Management Information Base
SNMP Notifications
Notifications and Alerting
- Component Notifications
- Application Notifications
Alert Rules
NMS Destination Configuration

Notification and Alert

Architectural Overview

A Cisco Policy Suite (CPS) vDRA deployment comprises multiple virtual machines (VMs) with multiple running containers deployed for scaling and high availability (HA) purposes. The monitoring and alerting system of the CPS vDRA deployment is centered around alert definition, metric gathering, and SNMP trap forwarding. The high-level architecture is shown below:

Major Components

Alert Definition

Alert definition occurs when an end user (or external system) configures the system via CLI, NETCONF, or RESTCONF interfaces with Alert rules. The system takes these alert rules and pushes the definitions into the Prometheus processes running within the cluster. The system does not provide a fixed set of alerts but provides a sample list of common alerts an operator may want to configure.

Metric Gathering

At the core of the alerting framework, the system runs multiple Prometheus processes (http://prometheus.io) which monitors the system and track metrics which can be used for triggering alerts. The default Prometheus instance that monitors the system tracks metrics at a 5 second interval for 24 hours.

SNMP Trap Forwarding

Once an alert is triggered the Prometheus server forwards that alert to the active control/Cluster Manager node. These alerts are forwarded based on configuration to external NMS systems using either SNMPv2 or SNMPv3.

Technical Architecture

Cisco Policy Suite is deployed as a distributed virtual appliance. The standard architecture uses Hypervisor virtualization. Multiple hardware host components run Hypervisors and each host runs several virtual machines. Within each virtual machine, one-to-many internal CPS components can run. CPS monitoring and alert notification infrastructure simplifies the virtual physical and redundant aspects of the architecture.

Protocols

The CPS monitoring and alert notification infrastructure provides a simple standards-based interface for network administrators and NMS (Network Management System). SNMP is the underlying protocol for all alert notifications. Standard SNMP notifications (traps) are used throughout the infrastructure.

Alerts are triggered from either the Cluster Manager or Control virtual machines if the Cluster Manager is not active.

SNMP Object Identifier and Management Information Base

Cisco has a registered private enterprise Object Identifier (OID) of 26878. This OID is the base from which all the aggregated CPS metrics are exposed at the SNMP endpoint. The Cisco OID is fully specified and made human-readable through a set of Cisco Management Information Base (MIB-II) files.

The current MIBs are defined as follows:

Table 1. MIBs
MIB Filename	Purpose
BROADHOP-MIB.mib	Defines the main structure include structures and codes.
BORADHOP-NOTIFICATION-MIB.mib	Defines Notifications/Traps available.

SNMP Notifications

SNMP Notifications in the form of traps (one-way) are provided by the infrastructure. CPS notifications do not require acknowledgments. The traps provide both:

Proactive alerts that the predetermined thresholds have been passed. For example, a disk is nearing capacity or CPU load is too high.
Reactive alerting when system components fail or are in a degraded state. For example, a process died or network connectivity outage has occurred.

Notifications and traps are categorized by a methodology similar to UNIX System Logging (syslog) with both Severity and Facility markers. All event notifications (traps) contain these markers.

Facility
Severity
Source (device name)
Device time

These objects can be used to identify where the issue lies and the Facility (system layer) and the Severity (importance) of the reported issue.

Facility

The generic syslog facility has the following definitions:

Note

Facility defines a system layer starting with physical hardware and progressing to a process running in a particular application.

Table 2. Syslog Facility
Number	Facility	Description
0	Hardware	Physical Hardware - Servers SAN NIC Switch and so on
1	Networking	Connectivity in the OSI (TCP/IP) model
2	Virtualization	VMware ESXi (or other) virtualization
3	Operating System	Linux OS
4	Application	Application (CPS Session Manager, CPS Binding Database, and so on)
5	Process	Specific process

There may be overlaps in the Facility value as well as gaps if a particular SNMP agent does not have full view into an issue. The Facility reported is always shown as viewed from the reporting SNMP agent.

Severity

In addition to Facility each notification has a Severity measure. The defined severities are directly from UNIX syslog and defined as follows:

Table 3. Severity Levels
Number	Severity	Description
0	Emergency	System is unusable.
1	Alert	Action must be taken immediately.
2	Critical	Critical conditions.
3	Error	Error conditions.
4	Warning	Warning conditions.
5	Notice	Normal but significant condition.
6	Info	Informational message.
7	Debug	Lower level debug message.
8	None	Indicates no severity.
9	Clear	The occurred condition has been cleared.

For the purposes of the CPS Monitoring and Alert Notifications system, Severity levels of Notice Info and Debug are usually not used.

Warning conditions are often used for proactive threshold monitoring (for example, Disk usage or CPU Load) which requires some action on the part of administrators but not immediately.

Conversely, Emergency severity indicates that some major component of the system has failed and that either core policy processing session management or major system functionality is impacted.

Categorization

Combinations of Facility and Severity create many possibilities of notifications (traps) that might be sent. However, some combinations are more likely than others. The following table lists some Facility and Severity categorizations:

Table 4. Severity Categorization
Facility.Severity	Categorization	Possibility
Process.Emergency	A single part of an application has failed.	Possible but in an HA configuration very unlikely.
Hardware.Debug	A hardware component has sent a NA debug message.	NA
Operating System.Alert	An Operating System (kernel or resource level) fault has occurred.	Possible as a recoverable kernel fault (on a vNIC for instance).
Application.Emergency	An entire application component has failed.	Unlikely but possible (load balancers failing for instance).

It is not possible to quantify every Facility and Severity combination. This is primarily driven by the fact that the alert rules can be configured to meet each operator's environment. However, greater experience with CPS leads to better diagnostics. The CPS Monitoring and Alert Notification infrastructure provides a baseline for event definition and notification by an experienced engineer.

Emergency Severity Note

Caution Emergency severities are very important! As a general principle, alerts should only be defined with an Emergency-severity trap if the system becomes inaccessible or unusable in some way. An unusable system is rare but might occur if multiple failures occur in the operating system virtualization networking or hardware facilities.

Notifications and Alerting

The CPS Monitoring and Alert Notification framework provides the following SNMP notification traps (one-way). Traps are either proactive or reactive. Proactive traps are alerts based on system events or changes that require attention (for example, Disk is filling up). Reactive traps are alerts that an event has already occurred (for example, an application process failed).

Component Notifications

Components are devices that make up the CPS system. These are systems level traps. They are generated when some predefined thresholds is crossed and are defined in the alerting configuration of the system. User can modify and change these using the alert definition commands.

Component notifications are defined in the BROADHOP-NOTIFICATION-MIB as follows:

 broadhopQNSComponentNotification NOTIFICATION-TYPE OBJECTS {
   broadhopComponentName, 
   broadhopComponentTime, 
   broadhopComponentNotificationName,
   broadhopNotificationFacility,
   broadhopNotificationSeverity,
   broadhopComponentAdditionalInfo }	 
STATUS current	 
DESCRIPTION "
Trap from any QNS component - i.e. device.
	 
"
::= { broadhopProductsQNSNotifications 1 }

Each Component Notification contains:

Name of the Notification being thrown (broadhopComponentNotificationName)
Name of the device throwing the notification (broadhopComponentName)
Time the notification was generated (broadhopComponentTime)
Facility or which layer the notification came from (broadhopNotificationFacility)
Severity of the notification (broadhopNotificationSeverity)
Additional information about the notification, which might be a bit of log or other information.

The following table provides the list of supported alarms:

Table 5. Component Notifications
Notification Name	Severity	Message Text	Description
DISK_FULL	Critical	Disk filesystem / usage is more than the 90%	Disk usage is monitored.
DISK_FULL	Clear	Disk filesystem / usage is greater than 10%	Disk usage is monitored.
HIGH_LOAD	Major	load average value for 5 min is greater than 3 current value is {{ $value }}	Load on the CPU is measured as per the linux operating system load.
HIGH_LOAD	Clear	load average value for 5 min is lower than 3
LINK_STATE	Critical	{{ $labels.interface }} is down on {{ $labels.instance }}	Indicates if any interface (ens***) has gone down.
LINK_STATE	Clear	{{ $labels.interface }} is up on {{ $labels.instance }}	Indicates if any interface (ens***) has gone down.
LOW_MEMORY	Critical	Available RAM is less than 20% current value is {{ $value }}	Monitors memory usage on the VMs. When free memory goes down, the threshold alarm is raised.
LOW_MEMORY	Clear	Available RAM is more than 20%
PROCESS_STATE	Critical	{{ $labels.service_name }} instance {{ $labels.module_instance }}of module {{ $labels.module }} is in Aborted state.	Monitors process restarts.
PROCESS_STATE	Clear	{{ $labels.service_name }} instance {{ $labels.module_instance }}of module {{ $labels.module }} is moved from Aborted state	Monitors process restarts.
HIGH_CPU_USAGE	Critical	CPU usage in last 10 sec is more than 30% current value {{ $value }}	Monitors CPU usage.
HIGH_CPU_USAGE	Clear	CPU usage in last 10 sec is lower than 30%	Monitors CPU usage.
QNS_JAVA_STARTED	Error	{{ $labels.service_name }} instance {{ $labels.module_instance }} of module {{ $labels.module }} is in Started state.	Indicates Java process restart.
QNS_JAVA_STARTED	Clear	{{ $labels.service_name }} instance {{ $labels.module_instance }} of module {{ $labels.module }} is moved from started state	Indicates Java process restart.
IP_NOT_REACHABLE	Critical	VM/VIP IP {{$labels.instance }} is not reachable	When IP is not reachable, this alarm is raised. For more information, see IP Not Reachable
IP_NOT_REACHABLE	Clear	VM/VIP IP {{$labels.instance }} is reachable
DIAMETER_PEER_DOWN	Error	Diameter peer is down.	Any peer connected to PAS is monitored.
DIAMETER_PEER_DOWN	Clear	Diameter peer is up	Any peer connected to PAS is monitored.
DRA_PROCESS_UNHEALTHY	Critical	{{ $labels.service_name }} instance {{ $labels.module_instance }} of module {{ $labels.module }} is not healthy	Process state is monitored.
DRA_PROCESS_UNHEALTHY	Clear	{{ $labels.service_name }} instance {{ $labels.module_instance }}of module {{ $labels.module }} is healthy	Process state is monitored.
DB_SHARD_DOWN	Critical	All DB Members of a replica set {{ $labels.shard_name }} are down	Alarm raised when both primary and secondary replica set members are down.
DB_SHARD_DOWN	Clear	All DB Members of a replica set {{ $labels.shard_name }} are not down
NO_PRIMARY_DB	Critical	Primary DB member not found for replica set {{ $labels.shard_name }}	Alarm raised when primary database is not up.
NO_PRIMARY_DB	Clear	Primary DB member found for replica set {{ $labels.shard_name }}	Alarm raised when primary database is not up.
SECONDARY_DB_DOWN	Critical	Secondary Member {{ $labels.name }} of replica set {{ $labels.shard_name }} is down	Alarm raised when secondary database is not up.
SECONDARY_DB_DOWN	Clear	Secondary Member {{ $labels.name }} of replica set {{ $labels.shard_name }} is up	Alarm raised when secondary database is not up.
LOW_SWAP	Critical	{{ $labels.instance }} has less than 80% swap memory .	Monitors the swap memory.
LOW_SWAP	Clear	{{ $labels.instance }} has greater than 80% swap memory .	Monitors the swap memory.
DOCKER_ENGINE_DOWN	Critical	Docker Engine {{ $labels.engine_id }} is down.	Monitors the docker engine status/state.
DOCKER_ENGINE_DOWN	Clear	Docker Engine {{ $labels.engine_id }} is up.	Monitors the docker engine status/state.
SVN_BACKUP_ALERT	Alert	svn backup in mongo is out of sync, please check svn_audit.log	Alarm raised when SVN repos are not in sync with SVN backup stored in mongo-admin containers.
SVN_BACKUP_ALERT	Clear	svn backup in mongo is in sync now

Note

By default, no alert rules are configured in the system.

IP Not Reachable

Two things impact the generaton of an IP_NOT_REACHABLE alert if a VIP fails over.

VIP switchover time
Prometheus polling interval

VIP switchover time can vary depending on the load of the VM and traffic on the network. Metrics are polled every 5 seconds. If a VIP fails over quickly, then an IP_NOT_REACHABLE alert is not generated.

Example: IP_NOT_REACHABLE alert not generated

T0 Prometheus polls the Orchestrator for the probe_icmp_target metric which is set to 1 (ip reachable).
T1 VIP fails
T2
T3
T4 VIP moves to the backup VM
T5 Prometheus polls the Orchestrator for the probe_icmp_target metric which is set to 1 (ip reachable)

Example: IP_NOT_REACHABLE alert generated

T0 Prometheus polls the Orchestrator for the probe_icmp_target metric which is set to 1 (ip reachable).
T1
T2
T3
T4 VIP fails
T5 Prometheus polls the Orchestrator for the probe_icmp_target metric which is set to 0 (ip not reachable)
T6 IP_NOT_REACHABLE alert is generated.

Application Notifications

The following table describes the application notifications:

Table 6. Application Notifications
Notification Name	Severity	Message Text	Description
DRA_MESSAGE_ PROCESSING_FAILURE_ TPS_EXCEEDED	Critical	Message Processing Failure TPS exceeded, current value is {{ $value }}.	TPS of rejected messages from DRA Director (Any messages with Result code !=2001)
DRA_MESSAGE_ PROCESSING_FAILURE_ TPS_EXCEEDED	Clear	Message Processing Failure TPS in control.
DRA_DIRECTOR_ TPS_EXCEEDED	Critical	{{ $labels.instance }} Director TPS exceeded, current value is {{ $value }}.	Success TPS of Total DRA Director (ResultCode=2001)
DRA_DIRECTOR_ TPS_EXCEEDED	Clear	{{ $labels.instance }} Director TPS in control .	Success TPS of Total DRA Director (ResultCode=2001)
DRA_WORKER_ TPS_EXCEEDED	Critical	{{ $labels.instance }} Worker TPS exceeded, current value is {{ $value }}.	TPS of Total Worker
DRA_WORKER_ TPS_EXCEEDED	Clear	{{ $labels.instance }} Worker TPS in control.	TPS of Total Worker
DRA_DB_ TPS_EXCEEDED	Critical	{{ $labels.instance }} Persistence DB TPS exceeded , current value is {{ $value }}.	TPS of DB TPS (Query and Update)
DRA_DB_ TPS_EXCEEDED	Clear	{{ $labels.instance }} Persistence DB TPS in control.	TPS of DB TPS (Query and Update)
DIAMETER_UNABLE _TO_DELIVER_ TPS_EXCEEDED	Critical	UNABLE_TO_DELIVER TPS exceeded, current value is {{ $value }}.	TPS of Diameter 3002
DIAMETER_UNABLE _TO_DELIVER_ TPS_EXCEEDED	Clear	UNABLE_TO_DELIVER in control.	TPS of Diameter 3002
DIAMETER_TRANSIENT _FAILURE_TPS_ EXCEEDED	Critical	TRANSIENT_FAILURE TPS exceeded, current value is {{ $value }}.	TPS of Diameter 4xxx
DIAMETER_TRANSIENT _FAILURE_TPS_ EXCEEDED	Clear	TRANSIENT_FAILURE in control.	TPS of Diameter 4xxx
DIAMETER_UNKNOWN _SESSIONS_TPS _EXCEEDED	Critical	UNKNOWN_SESSIONS TPS exceeded, current value is {{ $value }}.	TPS of Diameter 5002
DIAMETER_UNKNOWN _SESSIONS_TPS _EXCEEDED	Clear	UNKNOWN_SESSIONS in control.	TPS of Diameter 5002
MISMATCH_REQUEST _RESPONSE	Critical	{{ $labels.remote_peer }} MISMATCH_REQUEST _RESPONSE exceeded, current value is {{ $value }}.	Mismatch in Rate of Request and Response (Discrepancy in ingress and egress)
MISMATCH_REQUEST _RESPONSE	Clear	{{ $labels.remote_peer }} MISMATCH_REQUEST _RESPONSE in control.
KEEP_ALIVE_RAR _ROUTING_FAILURE_ TPS_EXCEEDED	Critical	Keep Alive RAR TPS exceeded, current value is {{ $value }}.	TPS of Keep Alive RAR Routing (Stale RAR)
KEEP_ALIVE_RAR _ROUTING_FAILURE_ TPS_EXCEEDED	Clear	Keep Alive RAR TPS in control.	TPS of Keep Alive RAR Routing (Stale RAR)
EGRESS_RATE_ LIMITED_SESSION_ ERR_RESP_TPS_ EXCEEDED	Critical	{{ $labels.local_peer }} {{ $labels.remote_peer }} Egress rate limited messages with error response TPS exceeded, current value is {{ $value }}.	TPS of Rate Limited Response for Error
EGRESS_RATE_ LIMITED_SESSION_ ERR_RESP_TPS_ EXCEEDED	Clear	{{ $labels.local_peer }} {{ $labels.remote_peer }} Egress rate limited messages with error response TPS in control.	TPS of Rate Limited Response for Error
EGRESS_RATE_ LIMITED_SESSION_ REJECT_TPS_ EXCEEDED	Critical	{{ $labels.local_peer }} {{ $labels.remote_peer }} Egress rate limited messages dropped without error TPS exceeded, current value is {{ $value }}.	TPS of Rate Limited Response Rejected
EGRESS_RATE_ LIMITED_SESSION_ REJECT_TPS_ EXCEEDED	Clear	{{ $labels.local_peer }}{{ $labels.remote_peer }} Egress rate limited messages dropped without error TPS in control.	TPS of Rate Limited Response Rejected
INGRESS_RATE_ LIMITED_SESSION_ ERR_RESP_TPS_ EXCEEDED	Critical	{{ $labels.local_peer }} {{ $labels.remote_peer }} Ingress rate limited messages with error response TPS exceeded, current value is {{ $value }}.	TPS of Rate Limited Response Error - Ingress
INGRESS_RATE_ LIMITED_SESSION_ ERR_RESP_TPS_ EXCEEDED	Clear	{{ $labels.local_peer }}{{ $labels.remote_peer }} Ingress rate limited messages with error response TPS in control.	TPS of Rate Limited Response Error - Ingress
INGRESS_RATE_ LIMITED_SESSION_ REJECT_TPS_ EXCEEDED	Critical	{{ $labels.local_peer }} {{ $labels.remote_peer }} Ingress rate limited messages dropped without error response TPS exceeded, current value is {{ $value }}.	TPS of Rate Limited Response Rejected - Ingress
INGRESS_RATE_ LIMITED_SESSION_ REJECT_TPS_ EXCEEDED	Clear	{{ $labels.local_peer }}{{ $labels.remote_peer }} Ingress rate limited messages dropped without error response TPS in control.	TPS of Rate Limited Response Rejected - Ingress
BINDING_STORAGE _ERRORS_TPS_ EXCEEDED	Critical	Binding Store Error TPS exceeded, current value is {{ $value }}.	TPS Binding Storage Errors (Binding storage failed because of high load/any other database error)
BINDING_STORAGE _ERRORS_TPS_ EXCEEDED	Clear	Binding Store Error TPS in control.
BINDING_LOOKUP_ ERROR_TPS_ EXCEEDED	Critical	Binding Lookup Error TPS exceeded, current value is {{ $value }}.	TPS Binding Lookup Errors (Binding retrieval failure because of internal error)
BINDING_LOOKUP_ ERROR_TPS_ EXCEEDED	Clear	Binding Lookup Error TPS in control.
DB_ERR_ TPS_EXCEEDED	Critical	All DB Errors TPS exceeded, current value is {{ $value }}.	TPS All database errors
DB_ERR_ TPS_EXCEEDED	Clear	All DB Errors TPS in control.	TPS All database errors
DB_RESPONSE_ TIME_EXCEEDED	Critical	{{ $labels.instance }} DB Response Time exceeded, current value is {{ $value }}.	Response Time Exceeds (Database Query/Update operation time exceeds)
DB_RESPONSE_ TIME_EXCEEDED	Clear	{{ $labels.instance }} DB Response Time in control, current value is {{ $value }}.
BINDING_KEY_ NOT_FOUND_IN_ AAR_TPS_ EXCEEDED	Critical	{{ labels.origin_host }} Binding Key not found in AAR TPS exceeded, current value is {{ $value }}.	TPS Binding Key Not Found in AAR (When AAR received with no "imsi+apn/msisdn/ipv6")
BINDING_KEY_ NOT_FOUND_IN_ AAR_TPS_ EXCEEDED	Clear	{{ labels.origin_host }} Binding Key not found in AAR TPS in control.
BINDING_KEY_ NOT_FOUND_IN_ CCR_I_TPS_ EXCEEDED	Critical	{{ labels.origin_host }} Binding Key not found in CCR(I) TPS exceeded, current value is {{ $value }}.	TPS Binding Key Not Found in CCR-I(When CCR-I received with no "imsi+apn/msisdn/ipv6"
BINDING_KEY_ NOT_FOUND_IN_ CCR_I_TPS_ EXCEEDED	Clear	{{ labels.origin_host }} Binding Key not found in CCR(I) TPS in control.
BINDING_NOT _FOUND_TPS_ EXCEEDED	Critical	{{ labels.origin_host }} Binding not found TPS exceeded, current value is {{ $value }}.	TPS Binding Not Found
BINDING_NOT _FOUND_TPS_ EXCEEDED	Clear	{{ labels.origin_host }} Binding not found TPS in control,.	TPS Binding Not Found
BINDING_DB_ INCONSISTENT_ TPS_EXCEEDED	Critical	TPS AAR with Result Code 5065 exceeded, current value is {{ $value }}.	TPS AAR with Result Code 5065
BINDING_DB_ INCONSISTENT_ TPS_EXCEEDED	Clear	TPS AAR with Result Code 5065 in control.	TPS AAR with Result Code 5065
BINDING_SESSION _DB_SIZE_ EXCEEDED	Critical	{{ $labels.db }} size exceeded, current value is {{ $value }}.	Total Size of Session DB Exceeded
BINDING_SESSION _DB_SIZE_ EXCEEDED	Clear	{{ $labels.db }} size in control.	Total Size of Session DB Exceeded
BINDING_IMSI_ APN_DB_SIZE _EXCEEDED	Critical	{{ $labels.db }} size exceeded, current value is {{ $value }}.	Total Size of IMSI / APN DB Exceeded
BINDING_IMSI_ APN_DB_SIZE _EXCEEDED	Clear	{{ $labels.db }} size in control.	Total Size of IMSI / APN DB Exceeded
BINDING_MSISDN _APN_DB_SIZE _EXCEEDED	Critical	{{ $labels.db }} size exceeded, current value is {{ $value }}.	Total Size of MSISDN / APN DB Exceeded
BINDING_MSISDN _APN_DB_SIZE _EXCEEDED	Clear	{{ $labels.db }} size in control	Total Size of MSISDN / APN DB Exceeded
BINDING_IPV6 _DB_SIZE_ EXCEEDED	Critical	{{ $labels.db }} size exceeded, current value is {{ $value }}.	Total Size of IPv6 DB Exceeded
BINDING_IPV6 _DB_SIZE_ EXCEEDED	Clear	{{ $labels.db }} size in control	Total Size of IPv6 DB Exceeded
PEER_TPS _EXCEEDED	Critical	{{ $labels.instance }} Peer Connection {{ $labels.local_peer}} {{ $labels.remote_peer }} TPS exceeded, current value is {{ $value }}.	Peer TPS Exceeded (Per peer TPS thresholds)
PEER_TPS _EXCEEDED	Clear	{{ $labels.instance }} Peer Connection {{ $labels.local_peer}} {{ $labels.remote_peer }} TPS in control.	Peer TPS Exceeded (Per peer TPS thresholds)
NO_RESPONSE_ PEER_FOR_ ANSWER_TPS _EXCEEDED	Critical	{{ $labels.instance }} No Response From Peer Connection TPS exceeded for {{ $labels.message_type}} , current value is {{ $value }}.	TPS No Response From Peer (timeouts from PCRF/any peer)
NO_RESPONSE_ PEER_FOR_ ANSWER_TPS _EXCEEDED	Clear	{{ $labels.instance }} No Response From Peer Connection TPS in control for {{ $labels.message_type}} .	TPS No Response From Peer (timeouts from PCRF/any peer)
PEER_RESPONSE _TIME_EXCEEDED	Critical	message_duration_seconds {type=~"peer_.*"} [labels: type]	Peer Response Time Exceeded (Response time of peer exceeds)
PEER_RESPONSE _TIME_EXCEEDED	Clear	Response time in control.	Peer Response Time Exceeded (Response time of peer exceeds)
NO_PEER_GROUP _MEMBER _AVAILABLE	Critical	{{ $labels.peer_group }} not available.	Peer Group is not Available (All peers in peer_group down)
NO_PEER_GROUP _MEMBER _AVAILABLE	Clear	{{ $labels.peer_group }} available.	Peer Group is not Available (All peers in peer_group down)
PCRF_NOT_CREATING _SESSIONS_TPS _EXCEEDED	Critical	Failed CCR-I TPS exceeded, current value is {{ $value }}.	TPS Rate of Failed CCR-I(ResultCode !=2001)
PCRF_NOT_CREATING _SESSIONS_TPS _EXCEEDED	Clear	Failed CCR-I TPS in control.	TPS Rate of Failed CCR-I(ResultCode !=2001)
FORWARDING_LOOP _FOUND_TPS _EXCEEDED	Critical	{{ $labels.remote_peer}} Loop Detected TPS exceeded , current value is {{ $value }}.	TPS Rate of Diameter Message Loop
FORWARDING_LOOP _FOUND_TPS _EXCEEDED	Clear	{{ $labels.remote_peer }} Loop Detected TPS in control.	TPS Rate of Diameter Message Loop
RELAY_LINK _TPS_GT_0	Critical	{{ $labels.remote_peer}} Relay Started, current value is {{ $value }}.	TPS Rate of Relay Peer > 0 (When relay peers start exchanging control plane messages)
RELAY_LINK _TPS_GT_0	Clear	{{ $labels.remote_peer}} Relay Stated.
RELAY_LINK _TPS_EXCEEDED	Critical	{{ $labels.remote_peer}} Relay Link TPS exceeded, current value is {{ $value }}.	TPS Rate of Relay Peer (TPS of relay messages)
RELAY_LINK _TPS_EXCEEDED	Clear	{{ $labels.remote_peer}} Relay Link TPS in control.	TPS Rate of Relay Peer (TPS of relay messages)
RELAY_LINK _STATUS	Critical	{{ $labels.remote_peer }} Relay Link is Down.	Relay Link is Down (Relay link status is monitored)
RELAY_LINK _STATUS	Clear	{{ $labels.remote_peer}} Relay Link is UP.	Relay Link is Down (Relay link status is monitored)
NO_RELAY_PEER _TPS_EXCEEDED	Critical	{{ $labels.remote_peer}} Relay Peer TPS exceeded, current value is {{ $value }}.	TPS Rate of Relay Peer Failure
NO_RELAY_PEER _TPS_EXCEEDED	Clear	{{ $labels.remote_peer}} Relay Peer TPS in control.	TPS Rate of Relay Peer Failure
SESSION_DB_ LIMIT_EXCEEDED	Alert	Session max DB limit reached	This alarm is generated when session database count crosses maximum limit configured using CLI for db-max-record-limit.
SESSION_DB_ LIMIT_EXCEEDED	Clear	Session max DB limit reached alarm cleared	This alarm is cleared when session database count drops below maximum limit configured using CLI for db-max-record-limit.
IPV6_DB_ LIMIT_EXCEEDED	Alert	IPv6 max DB limit reached	This alarm is generated when IPv6 database count crosses maximum limit configured using CLI for db-max-record-limit.
IPV6_DB_ LIMIT_EXCEEDED	Clear	IPv6 max DB limit reached alarm cleared	This alarm is cleared when IPv6 database count drops below maximum limit configured using CLI for db-max-record-limit.
IPV4_DB_ LIMIT_EXCEEDED	Alert	IPv4 max DB limit reached	This alarm is generated when IPv4 database count crosses maximum limit configured using CLI for db-max-record-limit.
IPV4_DB_ LIMIT_EXCEEDED	Clear	IPv4 max DB limit reached alarm cleared	This alarm is cleared when IPv4 database count drops below maximum limit configured using CLI for db-max-record-limit.
IMSIAPN_DB_ LIMIT_EXCEEDED	Alert	ImsiApn max DB limit reached	This alarm is generated when ImsiApn database count crosses maximum limit configured using CLI for db-max-record-limit.
IMSIAPN_DB_ LIMIT_EXCEEDED	Clear	ImsiApn max DB limit reached alarm cleared	This alarm is cleared when ImsiApn database count drops below maximum limit configured using CLI for db-max-record-limit.
MSISDNAPN_DB_ LIMIT_EXCEEDED	Alert	MsisdnApn max DB limit reached	This alarm is generated when MsisdnApn database count crosses maximum limit configured using CLI for db-max-record-limit.
MSISDNAPN_DB_ LIMIT_EXCEEDED	Clear	MsisdnApn max DB limit reached alarm cleared	This alarm is cleared when MsisdnApn database count drops below maximum limit configured using CLI for db-max-record-limit.
CRD_CACHE_ LOAD_ERROR	Critical	Error when loading CRD cache	This alarm is generated when CRD is not loaded properly or CRD is loaded with an error value as “1”.
CRD_CACHE_ LOAD_ERROR	Clear	CRD cache loaded successfully	This alarm is cleared when CRD cache is updated properly with value as “0”.

Alert Rules

Alert Rules Configuration

The following commands are used to configure alert rules:

scheduler#config

scheduler(config)# alert rule <rule_name>

where, <rule_name> is the name of the alert rule. For example, test

Value for 'expression' (<string>): <expression based on the stats>

where, <expression based on the stats> is the expression. For example, test>1

Value for 'message' (<string>): <message string to be sent in the alarm message>

where, <message string to be sent in the alarm message> is the message to be sent in the alarm. For example, testing

Value for 'snmp-clear-message' (<string>): <message string for clear alarm>

where, <message string for clear alarm> is the string for the clear message. For example. test clear

scheduler(config-rule-test)#
scheduler(config-rule-test)# snmp-facility
Possible completions:
  application  hardware  networking  os  proc  virtualization

scheduler(config-rule-test)# snmp-facility <SNMP facility to be provided for this alert>

where, <SNMP facility to be provided for this alert> is the facility to be provided for this alert. For example, application

scheduler(config-rule-test)# event-host-label <provide the node details>

where, <provide the node details> is used to provide node details. For example, instance

scheduler(config-rule-test)# snmp-severity
Possible completions:
  alert  critical  debug  emergency  error  info  none  notice  warning

scheduler(config-rule-test)# snmp-severity <SNMP severity to be send for this alert>

where, <SNMP severity to be send for this alert> is the severity level to be used for alert rule. For example, critical

scheduler(config-rule-test)# duration <time>

where, <time> causes Prometheus to wait for a certain duration between first encountering a new expression output vector element (like, an instance with a high HTTP error rate) and counting an alert as firing for this element. Elements that are active, but not firing yet, are in pending state.

scheduler(config-rule-test)# commit
Commit complete.
scheduler(config-rule-test)# end

Sample Configuration

The alert rules configuration are for reference only. Here is the configuration with sample values:

You can configure your alert rules based on your requirements.

scheduler#config
scheduler(config)# alert rule test
Value for 'expression' (<string>): test>1
Value for 'message' (<string>): testing
Value for 'snmp-clear-message' (<string>): test clear
scheduler(config-rule-test)#
scheduler(config-rule-test)# snmp-facility
Possible completions:
  application  hardware  networking  os  proc  virtualization
scheduler(config-rule-test)# snmp-facility application 
scheduler(config-rule-test)# event-host-label instance 
scheduler(config-rule-test)# snmp-severity
Possible completions:
  alert  critical  debug  emergency  error  info  none  notice  warning 
scheduler(config-rule-test)# snmp-severity critical
scheduler(config-rule-test)# duration 30s 
scheduler(config-rule-test)# commit
Commit complete.
scheduler(config-rule-test)# end

To display all the configured alert rules use the following command:

scheduler# show running-config alert | tab

                            EVENT                                                    
                            HOST               SNMP         SNMP      SNMP CLEAR     
NAME  EXPRESSION  DURATION  LABEL     MESSAGE  FACILITY     SEVERITY  MESSAGE        
-------------------------------------------------------------------------------------
test  test > 1    -         instance  testing  application  critical  testing clear

Sample Alert Rules

You can configure alert rules based on your requirements. For sample configuration, refer to Sample Alert Rule Configuration.

Note

event-host-label value is used as a key in the alarm map. So, configure the correct value based on your requirements while configuring alert rules.

Note

Grafana can be used to see all the statistics generated by the system and based on these statistics alerting rules can be configured.

Note

Alert SNMP command includes an optional parameter named add-vm-info that you can use to specify whether or not the VM name is prepended in the SNMP alarm in broadhopComponentName. For example, broadhopComponentName: VMName/containerName. By default, the parameter is set to true. If set to false, broadhopComponentName does not prepend VM name. For example, broadhopComponentName: containerName. The following table includes sample alert rules when add-vm-info is set to false. For more information about this parameter and the command, see the vDRA Operations Guide.

Table 7. Sample Alert Rules
Alarm Name	Configuration
DiskFull	broadhopComponentName: Linux host name broadhopComponentNotificationName: DISK_FULL broadhopNotificationFacility: hardware Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Disk Filesystem/usage is more than 90% Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Disk filesystem/usage is greater than 10% Expression: (round((node_filesystem_size_bytes{job='node_exporter'}- node_filesystem_avail_bytes{job='node_exporter'})/node_filesystem_size_bytes {job='node_exporter'}*100)) >= 70
HighLoad	broadhopComponentName: Linux host name broadhopComponentNotificationName: HIGH_LOAD broadhopNotificationFacility: hardware Alert broadhopNotificationSeverity: major Alert broadhopComponentAdditionalInfo: load average value for 5 minutes is greater than 3 current value is {{ $value }} Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: load average value for 5 minutes is lower than 3 Expression: node_load5 > 3
LowMemoryAlert	broadhopComponentName: Linux host name broadhopComponentNotificationName: LOW_MEMORY broadhopNotificationFacility: hardware Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Available RAM is less than 20% current value is {{ $value }} Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Available RAM is more than 20% Expression: round((node_memory_MemAvailable_bytes/node_memory_MemTotal_bytes)*100) < 20
High CPU Usage Alert	broadhopComponentName: Linux host name broadhopComponentNotificationName: HIGH_CPU_USAGE broadhopNotificationFacility: hardware Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: CPU usage in last 10 sec is more than 30% current value {{ $value }} Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: CPU usage in last 10 sec is lower than 30% Expression: rate(node_cpu_seconds_total{mode=\"system\"} [10s])*100 > 40
Link down Alert	broadhopComponentName: Linux host name broadhopComponentNotificationName: LINK_STATE broadhopNotificationFacility: networking Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: {{ $labels.interface }} is down on {{ $labels.instance }} Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: {{ $labels.interface }} is up on {{ $labels.instance }} Expression: link_state == 0
Process down Alert	Container Name: Linux host name broadhopComponentNotificationName: PROCESS_STATE broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: {{ $labels.service_name }} instance {{ $labels.module_instance }}of module {{ $labels.module }} is in Aborted state. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: {{ $labels.service_name }} instance {{ $labels.module_instance }}of module {{ $labels.module }} is moved from Aborted state Expression: docker_service_up==1 or docker_service_up==3
VM/Node Down Alert	broadhopComponentName: IP Address broadhopComponentNotificationName: IP_NOT_REACHABLE broadhopNotificationFacility: networking Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: VM/VIP IP {{$labels.instance }} is not reachable Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: VM/VIP IP {{$labels.instance }} is reachable Expression: probe_icmp_target==0
DiameterPeer Status	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: DIAMETER_PEER_DOWN broadhopNotificationFacility: application Alert broadhopNotificationSeverity: error Alert broadhopComponentAdditionalInfo: Diameter peer is down Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Diameter peer is up. Expression: alert rule DIAMETER_PEER_DOWN expression "((sum(peer_connection_status{remote_peer != \"\"}) by (local_peer,remote_peer)) == 0)"
DRA Process Down (healthy) Alert	broadhopComponentName: Container Name broadhopComponentNotificationName: DRA_PROCESS_UNHEALTHY broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: {{ $labels.service_name }} instance {{ $labels.module_instance }} of module {{ $labels.module }} is not healthy Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: {{ $labels.service_name }} instance {{ $labels.module_instance }} of module {{ $labels.module }} is healthy Expression: docker_service_up==4
All DB Member of Replica Set Down Alert	broadhopComponentName: Shard Name broadhopComponentNotificationName: DB_SHARD_DOWN broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: All DB Members of replica set {{ $labels.shard_name }} are down Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Some DB Members of replica set {{ $labels.shard_name }} are up Expression: absent(mongodb_mongod_replset_member_state{shard_name="shard-1"})==1
No primary DB Member found Alert	broadhopComponentName: Shard Name broadhopComponentNotificationName: NO_PRIMARY_DB broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Primary DB member not found for replica set {{ $labels.shard_name }} Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Primary DB member found for replica set {{ $labels.shard_name }} Expression: absent(mongodb_mongod_replset_member_health {shard_name="shard-1",state="PRIMARY"})==1
Secondary DB Member Down Alert	broadhopComponentName: Shard Name broadhopComponentNotificationName: SECONDARY_DB_DOWN broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Secondary Member {{ $labels.name }} of replica set {{ $labels.shard_name }} is down Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Secondary Member {{ $labels.name }} of replica set {{ $labels.shard_name }} is down Expression: (mongodb_mongod_replset_member_state != 2) and ((mongodb_mongod_replset_member_state==8) or (mongodb_mongod_replset_member_state==6))
DRA message processing failure TPS exceeded	broadhopComponentName: System broadhopComponentNotificationName: DRA_MESSAGE_PROCESSING_FAILURE_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Message Processing Failure TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo Message Processing Failure TPS in control. Expression: rate(rejected_messages_total[5m]) > 5
Keepalive RAR routing failure - TPS exceeded	broadhopComponentName: System broadhopComponentNotificationName: KEEP_ALIVE_RAR_ROUTING_FAILURE_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Keep Alive RAR TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Keep Alive RAR TPS in control. Expression: rate(keep_alive_rar_failure[5m]) > 5
Egress rate limited session error response TPS exceeded	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: EGRESS_RATE_LIMITED_SESSION_ERR_RESP_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Egress rate limited messages with error response TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Egress rate limited messages with error response TPS in control. Expression: rate(diameter_peer_egress_rate_limited_with_err_response[5m]) > 5
Egress rate limited session reject TPS exceeded	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: EGRESS_RATE_LIMITED_SESSION_REJECT_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Egress rate limited messages dropped without error TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Egress rate limited messages dropped without error TPS in control. Expression: rate(diameter_peer_egress_rate_limited_without_err_response[5m]) > 5
Ingress rate limited session error response TPS exceeded	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: INGRESS_RATE_LIMITED_SESSION_ERR_RESP_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Ingress rate limited messages with error response TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Ingress rate limited messages with error response TPS in control. Expression: rate(diameter_peer_ingress_rate_limited_with_err_response[5m]) > 5
Ingress rate limited session reject TPS exceeded	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: INGRESS_RATE_LIMITED_SESSION_REJECT_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Ingress rate limited messages dropped without error response TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Ingress rate limited messages dropped without error response TPS in control. Expression: rate(diameter_peer_ingress_rate_limited_without_err_response[5m]) > 5
Binding key not found in AAR TPS exceeded	broadhopComponentName: System broadhopComponentNotificationName: BINDING_KEY_NOT_FOUND_IN_AAR_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Binding Key not found in AAR TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Binding Key not found in AAR TPS in control. Expression: rate(aar_bind_key_not_found_total[5m]) > 5
Binding key not found in CCR-I TPS exceeded	broadhopComponentName: System broadhopComponentNotificationName: BINDING_KEY_NOT_FOUND_IN_CCR_I_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Binding Key not found in CCR(I) TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Binding Key not found in CCR(I) TPS in control. Expression: rate(ccri_bind_key_not_found_total[5m]) > 5
Peer response time exceeded	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: PEER_RESPONSE_TIME_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Peer response time exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Peer response time in control. Expression: rate(message_duration_seconds{type=~\"peer_.*\"}[5m]) > 5
No peer group member available	broadhopComponentName: Container Name broadhopComponentNotificationName: NO_PEER_GROUP_MEMBER_AVAILABLE broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Peer group not available. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Peer group available. Expression: no_active_peer_in_peer_group ==1
Forwarding loop found TPS exceeded	broadhopComponentName: System broadhopComponentNotificationName: FORWARDING_LOOP_FOUND_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Loop Detected TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Loop Detected TPS in control. Expression: rate(diameter_loop_detected [5m]) > 5
No relay peer TPS exceeded	broadhopComponentName: Container Name broadhopComponentNotificationName: NO_RELAY_PEER_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Relay Peer TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Relay Peer TPS in control. Expression: rate(relay_send_nopeer[5m]) > 5
Relay link status	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: RELAY_LINK_STATUS broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Relay Link is down. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Relay Link is up Expression: relay_peer_status == 0
Binding not found TPS exceeded	broadhopComponentName: System broadhopComponentNotificationName: BINDING_NOT_FOUND_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Binding not found TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Binding not found TPS in control Expression: rate(binding_not_found_total[5m]) > 5
Relay link TPS GT 0	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: RELAY_LINK_TPS_GT_0 broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Relay started. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Relay not started. Expression: rate(relay_peer_messages_total[5m]) > 0
Relay link TPS exceeded	broadhopComponentName: Peer FQDN broadhopComponentNotificationName: RELAY_LINK_TPS_EXCEEDED broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: Relay Link TPS exceeded. Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: Relay Link TPS in control. Expression: rate(relay_peer_messages_total[5m]) > 5
SVN_BACKUP_ALERT	broadhopComponentName: Linux host name broadhopComponentNotificationName: SVN_BACKUP_ALERT broadhopNotificationFacility: application Alert broadhopNotificationSeverity: warning Alert broadhopComponentAdditionalInfo: svn backup in mongo is out of sync Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: svn backup in mongo is in sync now Expression: svn_alert==1
CRD_CACHE_ LOAD_ERROR	broadhopComponentName: Container Name broadhopComponentNotificationName: CRD_CACHE_LOAD_ERROR broadhopNotificationFacility: application Alert broadhopNotificationSeverity: critical Alert broadhopComponentAdditionalInfo: CRD cache not loaded / loaded with error Clear broadhopNotificationSeverity: clear Clear broadhopComponentAdditionalInfo: CRD cache loaded successfully Expression: crd_cache_load_error==1

Health Status of Service

On getting the Qns Java Process State alert, the user has to access the system and check the diagnostics logs of the service to get the exact issue with the service. To access the system and check the diagnostics log, run the following command:

show system diagnostics | include <service_name>

For example:

scheduler# show system diagnostics | include diameter-endpoint-s1
system diagnostics diameter-endpoint-s1 serfHealth 1
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 1
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 2
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 3
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 4
 message "CLEARED: InterfaceID=diameter-endpoint-s1.weave.local;msg=\"Memcached server is operational\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 5
 message "CLEARED: InterfaceID=com.broadhop.server:diameter-endpoint-s1.weave.local;msg=\" before Feature com.broadhop.server is Running\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 6
 message "CLEARED: InterfaceID=com.broadhop.dra.service:diameter-endpoint-s1.weave.local;msg=\" before Feature com.broadhop.dra.service is Running\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 7
 message "CLEARED: InterfaceID=com.broadhop.common.service:diameter-endpoint-s1.weave.local;msg=\" before Feature com.broadhop.common.service is Running\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 8
 message "CLEARED: InterfaceID=com.broadhop.resourcemonitor:diameter-endpoint-s1.weave.local;msg=\" before Feature com.broadhop.resourcemonitor is Running\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 9
 message "CLEARED: InterfaceID=com.broadhop.microservices.control:diameter-endpoint-s1.weave.local;msg=\" before Feature com.broadhop.microservices.control is Running\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 10
 message "CLEARED: InterfaceID=com.broadhop.custrefdata.service:diameter-endpoint-s1.weave.local;msg=\" before Feature com.broadhop.custrefdata.service is Running\""
system diagnostics diameter-endpoint-s1 service:cisco-policy-app 11
system diagnostics diameter-endpoint-s1 service:cisco-policy-jmx 1
scheduler#

Delete Alert Rules

The following section describes the procedure to delete an alert rule and are for reference only:

scheduler# config
Entering configuration mode terminal
scheduler(config)# no alert rule node_down
scheduler(config)# commit
Commit complete.
scheduler(config)# end
scheduler#

Alert Status

Use the following command to display the current alerts status:

show alert status

For example:

scheduler# show alert status
NAME                  EVENT HOST      STATUS    MESSAGE                                                           UPDATE TIME                    
--------------------------------------------------------------------------------------------------------------------------------------------------
high_cpu_alert        system          firing    CPU usage is more than 30% current_value is 37.05555555555597     2017-05-22T10:59:37.945+00:00  
high_cpu_alert_1      control-0       resolved  CPU usage is more than 30% current_value is 33.62500000000637     2017-05-22T17:17:38.184+00:00  
high_cpu_alert_1      control-1       resolved  CPU usage is more than 30% current_value is 35.666666666667076    2017-05-22T11:29:37.899+00:00  
high_cpu_usage_alert  localhost:9090  resolved  CPU Usage for last 1 min is more than configured threshold        2017-05-22T09:55:37.902+00:00  
2017-05-22T15:39:37.811+00:00  

scheduler#

Database Alert Expression

IMSI_MSISDN Cluster

Alert Threshold for IMSI/MSISDN:

Capacity per Primary Shard = 145000/48 = 3020 TPS
Alert Threshold per Shard Primary (85%) = 2500 TPS

alert rule DRA_IMSI_MSISDN_DB_TPS_EXCEEDED

expression "sum(rate(mongo_operation_total{state='primary',type='mongo',op=~'update|query|delete',cluster='IMSI_MSISDN'}[5m])) > (2500 * sum (mongo_node_state_primary {cluster='IMSI_MSISDN',type='mongo'}))"

event-host-label instance

message "{{ $labels.instance }} Persistence DB TPS exceeded , current value is {{ $value }} !"

snmp-severity critical

snmp-clear-message "{{ $labels.instance }} Persistence DB TPS in control, current value is {{ $value }} !"

Session_IPv6 Cluster

Alert Threshold for Session:

Capacity per Primary Shard = 180000/48 = 3750 TPS
Alert Threshold per Shard Primary (85%) = 3200 TPS

alert rule DRA_SESS_IPV6_DB_TPS_EXCEEDED

expression "sum(rate(mongo_operation_total{state='primary',type='mongo',op=~'update|query|delete',cluster=~'SES_IPV6_.*'}[5m])) > (3200 * sum(mongo_node_state_primary{cluster=~'SES_IPV6_.*',type='mongo'}))"

event-host-label instance

message "{{ $labels.instance }} Persistence DB TPS exceeded , current value is {{ $value }} !"

snmp-severity critical

snmp-clear-message "{{ $labels.instance }} Persistence DB TPS in control, current value is {{ $value }} !"

NMS Destination Configuration

The following configuration is for reference only:

You can configure the NMS destination based on your requirements.

Example: SNMPv2

scheduler#config
scheduler(config)# alert snmp-v2-destination "10.1.1.1"
Value for 'community' (<string>): "cisco"   
scheduler(config-snmp-v2-destination-10.1.1.1)# commit
Commit complete.
scheduler(config-snmp-v2-destination-10.1.1.1)# end

where, "10.1.1.1" is the SNMPv2 NMS destination address.

Example: SNMPv3

scheduler# config
scheduler(config)# alert snmp-v3-destination <nms_ip> e.g. 10.1.1.2
Value for 'user' (<string>): <username> e.g. cis_user
Value for 'auth-password' (<string>): <password string > e.g. cisco-123
Value for 'privacy-password' (<string>): <password string> e.g. cisco-123
scheduler(config-snmp-v3-destination-10.1.1.2)# auth-proto 
[MD5,SHA] (SHA): SHA
scheduler(config-snmp-v3-destination-10.1.1.2)# privacy-p   
Possible completions:
  privacy-password  privacy-protocol
scheduler(config-snmp-v3-destination-10.1.1.2)# privacy-protocol 
[AES,DES] (AES): AES
scheduler(config-snmp-v3-destination-10.1.1.2)# engine-id 
(<string>) (0x0102030405060708): 0x0102030405060708
scheduler(config-snmp-v3-destination-10.1.1.2)# commit
Commit complete.
scheduler(config-snmp-v3-destination-10.1.1.2)# end
scheduler#

where, "10.1.1.2" is the SNMPv3 NMS destination address.

All the configured NMS destinations in the system can be displayed using the following command:

scheduler# show running-config alert | tab
NMS                  
ADDRESS   COMMUNITY  
---------------------
10.1.1.1  cisco

alert snmp-v3-destination 10.142.148.160
 engine-id        0x0102030405060708
 user             cis_user
 auth-proto       SHA
 auth-password    cisco-123
 privacy-protocol AES
 privacy-password cisco-123
!

CPS vDRA SNMP and Alarms Guide, Release 21.1.0

Bias-Free Language

Book Title

CPS vDRA SNMP and Alarms Guide, Release 21.1.0

Chapter Title