Configuring and Validating Fluidmax Fast Failover
-
Primary and backup primary node should have same configuration, it includes the same channel’s parameters (frequency, channel width, and so on.) as well as the Fluidmax parameters like role and cluster ID.
-
Fluidmax redundancy provides resilience for node-failure type of faults such as power loss or catastrophic hardware fault on the primary node.
-
Enable Fluidmax fast failover using Fluidmax CLI commands on all devices except for the vehicle devices.
Note
Catalyst IW9167E supports both Gateway + MP (Mesh Point) – MP (with same tower ID) and ME (Mesh End) – ME fast failover.