Creating a DHCP Scope
Internal DHCP server can be enabled and DHCP scope created during Day 0 from Setup Wizard as well as in Day 1 using the controller WebUI. Typically, one would create DHCP scopes in Day 1 if they want to associate the scopes with WLANs.
To create a scope and associate it to a WLAN using the controller WebUI, follow the procedure below:
Navigate to Wireless Settings > DHCP Server > Add new Pool . The Add DHCP Pool window will pop up.
On the Add DHCP Pool window. Enter the following fields:
After creating the scope, it is time to assign the VLAN mapped to the DHCP scope to the WLAN. To assign a VLAN to WLAN, navigate to Wireless Settings > WLANs .
If the WLAN does not exist, create a WLAN or if one does exist, edit the existing WLAN and click on the VLAN and Firewall tab.
On the VLAN and Firewall tab, configure the following: