Release Change Reference, StarOS Release 21.27

Feature Summary and Revision History


Applicable Product(s) or Functional Area	MME
Applicable Platform(s)	ASR 5500 VPC-DI
Feature Default	Disabled - Configuration Required
Related Changes in This Release	Not Applicable
Related Documentation	Command Line Interface Reference


Revision Details	Release
The test CLI mme clear-route-multipath-zero mme-service `service_name` enable/disable is removed from Exec mode and the new CLI clear-route-multipath-zero is configured under mme-service.	21.27.0

Previous Behavior:The existing test CLI, mme clear-route-multipath-zero mme-service service_name enable/disable was configured under Exec mode.

New Behavior:The new CLI, clear-route-multipath-zero is configured under mme-service Config mode.

Note

The existing test CLI is removed from the Exec mode.

Use the following configuration to enable clearing dynamic route table.

configure 
   context context_name 
      mme-service service_name 
         [ no ] clear-route-multipath-zero 
   end

NOTES:

clear-route-multipath-zero : Enables clearing dynamic route table if diameter lookup finds dynamic route entry with multipath zero. This will take effect only for the subsequent mme diameter session.
no : Disables clearing dynamic route table for multipath zero condition.