end
Exits the current configuration mode and returns to the Exec mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
end
Usage Guidelines
Use this command to return to the Exec mode.
The EAP Mode Configuration Mode is used to configure the Extensible Authentication Protocol (EAP) authentication method supported by the system.
Exec > Global Configuration > Context Configuration > EAP Profile Configuration
configure > context context_name > eap-porfile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-ctx-eap-profile)#
![]() Important |
The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s). |
Exits the current configuration mode and returns to the Exec mode.
All
Security Administrator, Administrator
end
Use this command to return to the Exec mode.
Exits the current mode and returns to the parent configuration mode.
All
Security Administrator, Administrator
exit
Use this command to return to the parent configuration mode.
Configures the EAP method used for authentication.
ASN-GW
PDIF
Security Administrator, Administrator
Exec > Global Configuration > Context Configuration > EAP Profile Configuration
configure > context context_name > eap-porfile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-ctx-eap-profile)#
method { eap-aka | eap-gtc | eap-md5 } [ priority num ]
Specifies a priority order for a specific EAP authentication method an integer from 1 though 65535.
Use this command to specify the EAP authentication method(s) to use and to place multiple methods in priority order.
method eap-aka priority 3