bearer 3gpp apn
This command configures an access ruledef to analyze user traffic based on APN bearer.
Security Administrator, Administrator
Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration
active-charging service service_name > access-ruledef access_ruledef_name
Entering the above command sequence results in the following prompt:
[ no ] bearer 3gpp apn [ case-sensitive ] operator value
Removes previously configured bearer ruledef.
This keyword makes the rule case sensitive.
By default, ruledefs are not case sensitive.
Specifies how to logically match the APN name.
operator must be one of the following:
!= : Does not equal
!contains : Does not contain
!ends-with : Does not end with
!starts-with : Does not start with
= : Equals
contains : Contains
ends-with : Ends with
starts-with : Starts with
The APN name to match in bearer flow.
value must be an alphanumeric string of 1 through 63 characters that can include punctuation characters.
Use this command to specify an access ruledef to analyze user traffic based on APN name.
bearer 3gpp apn = apn12