eNB Group Configuration Mode Commands

Mode

Creates Global eNB and enters eNBG Group configuration mode.

Exec > Global Configuration > LTE Policy > eNB Group Service Configuration

configure > lte-policy > enb-group enb_group_name

Entering the above command sequence results in the following prompt:

[context_name]host_name(enb-group)#

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

global-enb-id

Global eNB ID.

Product

MME

Privilege

Administrator

Mode

Exec > Global Configuration > LTE Policy Configuration > eNB Group

configure > lte-policy > enb-group

Entering the above command sequence results in the following prompt:

[local]host_name(enb-group)#

Syntax

global-enb-id prefix  network_identifier_name bits  bits

global-enb-id prefix `network_identifier_name` bits `bits`

Global eNB ID prefix contains bit string which should be matched with Hexadecimal value. network_identifier_name Must Hexadecimal number between 0x0 and 0xFFFFFFF

Usage Guidelines

Use this command to create group of eNBs based on eNB ID "prefix" to match with 'bits' of eNBs.

Example

The following command to create group of eNBs based on eNB ID "prefix" to match with 'bits' of eNBs.

global-enb-id prefix  network_identifier_name bits  bits

relative-mme-capacity

Relative MME Capacity which should be sent to eNB group.

Product

MME

Privilege

Administrator

Mode

Exec > Global Configuration > LTE Policy Configuration > eNB Group

configure > lte-policy > enb-group

Entering the above command sequence results in the following prompt:

[local]host_name(enb-group)#

Syntax

relative-mme-capacity  relative_mme_capacity

relative-mme-capacity `relative_mme_capacity`

Relative MME capacity in S1 setup response for eNB which matches grouping criteria.

relative_mme_capacity Must be an Integer from 1 to 255.

Usage Guidelines

Use this command to configure relative MME Capacity which be sent to eNB group.

Example

The following command to configure relative MME Capacity which be sent to eNB group.

relative-mme-capacity  relative_mme_capacity

Command Line Interface Reference, Modes E - F, StarOS Release 21.13

Bias-Free Language

Book Title

Command Line Interface Reference, Modes E - F, StarOS Release 21.13

Chapter Title