Cisco Aironet 1552 Series for Hazardous Locations Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 31, 2016

Chapter: Channels and Power Levels

Channels and Power Levels

For channel and maximum power level settings, refer to the Channels and Maximum Power Settings for Cisco Aironet Lightweight Access Points and Bridges document available on the Cisco Wireless documentation page of Cisco.com.

To browse to the document, follow these steps:

Step 1 Click this link and go to the Cisco Wireless documentation home page:
http://www.cisco.com/en/US/products/hw/wireless/index.html

Step 2 Click Support. The Support and Documentation page displays.

Step 3 Click Wireless

Step 4 Click 1550.

Step 5 Click Install and Upgrade .

Step 6 Click Install and Upgrade Guides .

Step 7 Click Channels and Maximum Power Settings for Cisco 1550 Series Outdoor Mesh Access Points document.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)