Change History
|
Date |
Change |
Reason |
|---|---|---|
|
May 2020 |
|
X12.6 release and document correction |
|
March 2019 |
Clarify that removal of a cluster peer deletes all configuration for the LAN2 interface in dual NIC deployments. |
Clarification |
|
February 2019 |
Updated for X12.5. From this version, the guide applies only to Cisco Expressway Series and not to Cisco VCS. |
X12.5 release |
|
February 2019 |
Cluster Address Mapping section edited. Software version updated to X8.11.4 maintenance release. Other superficial enhancements to text. |
Documentation defect, X8.11.4 release |
|
September 2018 |
Updated for Webex and Spark platform rebranding, CE1200 appliance, and X8.11.1 maintenance release. |
X8.11.1 release |
|
August 2018 |
Corrected text and example in "Cluster Name and DNS SRV Records" section. |
Correction |
|
July 2018 |
Updated for X8.11 |
X8.11 release |
|
November 2017 |
Updated round trip delay and maximum hop distances in "Prerequisites" section. |
Update |
|
October 2017 |
Strengthened advice on cluster upgrade order. |
Clarification |
|
August 2017 |
Added note that all cluster peers should be configured in the same domain. |
Omission |
|
July 2017 |
Updated for X8.10. |
X8.10 release |
|
April 2017 |
Added section and related edits for cluster address mapping. |
X8.9.2 release |
|
December 2016 |
Added section on clusters in isolated networks in relation to TLS. |
X8.9 release |
|
June 2016 |
Cluster communications now use TLS. Registrations, FindMe, TMSPE support introduced on Expressway. |
X8.8 release |
|
November 2015 |
Updated for X8.7. |
|
|
July 2015 |
Updated for X8.6. New procedure for replacing a peer. |
|
|
April 2015 |
Menu path changes for X8.5 onwards. Republished with X8.5.2. |
|
|
December 2014 |
Updated for X8.5. |
|
|
June 2014 |
Republished for X8.2. |
|
|
April 2014 |
Updated for Expressway X8.1.1:
|
|
|
December 2013 |
First release of Expressway version of this document. For older VCS versions see VCS Configuration Guides page. |
Feedback