View List of Host Addresses for Configured Devices
Use the Log and Trace Settings page to see the Host Address of OAMP server and to configure log and trace settings for this device.
The host address for the Controller displays OAMPServer process.
From the Actions column, click the ellipsis icon (...) to edit the Log, Syslog, and Subsystem server connection settings for that server process.
For configuring the log settings of the Unified Intelligence Center Reporting server process, see utils cuic logging.
Logging for Unified Intelligence Center
For more information about Unified Intelligence Center logging, see utils cuic logging.
Logging and Tracing for OAMP
Use the Log and Trace Settings page to configure log and trace settings for the OAMPServer.
For configuring the log settings of the Unified Intelligence Center Reporting server process, see utils cuic logging.
Logging and Tracing are two mechanisms for application monitoring and management and are differentiated as follows:
-
Logs contain predefined, higher-level messages that can indicate everything from general system behavior to severe error conditions.
-
Traces are free-form, developer-oriented, detailed information that is not printed to the logs by default, but only when increased logging is enabled to debug problems.
You configure log levels to be Basic or Detailed. Basic is the default. When you change the log levels to Detailed, you have the opportunity to select specific trace level definitions.
There are two ways to review log and tracing information:
-
The Command Line Interface. Using the show trace command.
-
The Real Time Monitoring Tool (RTMT).
Edit Syslog Server Connection Settings for Unified Intelligence Center
For more information about the Unified Intelligence Center logging, see utils cuic logging.
Edit Syslog Server Connection Settings for OAMP
From the Log and Trace Settings list page > Actions column, click the ellipsis icon (...) and click Edit to edit the Log, Syslog, and Subsystem settings.
Caution |
Modify the settings on this page only under the direction of, and with the assistance of, your support provider. |
Log Settings
Use the following required fields to define the maximum size of the log directory and of each log file.
Field |
Description |
---|---|
Maximum Log Directory Size |
Enter a numeric value between 50 and 50,000. The default is 1,500. When the directory size exceeds 50,000, the oldest log files are deleted. |
Maximum Log File Size |
Enter a numeric value between 1 and 50. The default is 50. When a log size exceeds 50, a new log file is created. |
Syslog Settings
Use the following fields to identify the server where the log files are stored.
Field |
Description |
||
---|---|---|---|
Primary Host |
The host address of the primary syslog server that stores the log files.
|
||
Backup Host |
The host address of the backup syslog server that stores the log files.
|
Subsystem Settings
Click the Subsystem tab to set the log levels for each subsystem.
Actions on this page
-
Save - Save the changes you have made.
-
Cancel - Undo all changes you have made since the last save.
Subsystem Trace Definitions - OAMPServer
OAMP
Operation Administration Maintenance and Provisioning (OAMP) Subsystem Specific Trace Definitions
Trace |
Definition |
---|---|
TRACE_BULK |
To control logging for looping/bulk operations |
TRACE_GENERAL_UI |
For tracing the general OAMP UI |
TRACE_EXCEPTION |
For tracing Exceptions |
TRACE_PARAM |
For tracing Parameters |
TRACE_DBACCESS |
Trace DB Access for db fetch and modify such as Save, Update, Delete |
TRACE_METHOD |
For tracing of Entry/Exit of Methods |
OAMP-BO
OAMP-BO Subsystem Specific Trace Definitions
Trace |
Description |
---|---|
TRACE_BULK |
To control logging for looping/bulk operations |
TRACE_EXCEPTION |
For tracing Exceptions |
TRACE_GENERAL_BO |
General Traces for OAMP back-end |
TRACE_PARAM |
For tracing Parameters |
TRACE_DBACCESS |
Trace DB Access for db fetch and modify such as Save, Update, Delete |
TRACE_METHOD |
For tracing of Entry/Exit of Methods |
WSM-BO
WSM-BO Subsystem Specific Trace Definitions
Trace |
Description |
---|---|
TRACE_EXCEPTION |
For tracing Exceptions |
TRACE_GENERAL_BO |
General Traces for OAMP back-end |
TRACE_PARAM |
For tracing Parameters |
TRACE_DBACCESS |
Trace DB Access for db fetch and modify such as Save, Update, Delete |
TRACE_METHOD |
For tracing of Entry/Exit of Methods |