Unified CCX Administration Web Interface

The Unified CCX provides a multimedia (voice, data, and web) IP-enabled customer-care application environment, using VoIP technology that allows your Cisco Unified Communications network to share resources with your data network.

You can then use a web browser located on any computer on the IP network to configure and administer your applications with the Unified CCX Administration web interface.


Note

Support for high availability and remote servers is available only in multiple-server deployments.


The Unified CCX Administration web interfaces (Cisco Unified CCX Administration and Cisco Unified CCX Serviceability) allows you to:

  • Configure and monitor overall system functions, applications, and subsystems

  • Access a wide variety of system tools

  • Perform many other administrative tasks

The following sections provide more information about the Unified CCX Administration web interface:

Access Unified CCX Administration Web Interface

The web pages of the Unified CCX Administration web interface allow you to configure and manage the Unified CCX system and its subsystems.

Use the following procedure to browse into the server and log in to Unified CCX Administration web interface.

Procedure


Step 1

Open the Unified CCX Administration Authentication page from a web browser on any computer on your network and enter the following case-sensitive URL:

 https://<servername>/appadmin

In this example, replace <servername> with the hostname or IP address of the required Unified CCX server.

A Security Alert dialog box is displayed.

Step 2

Click the appropriate button.

The Authentication page appears.

Note 
  • Ensure that Cisco Tomcat and Cisco Unified Cluster View Daemon services are running before you log in to the Unified CCX Administration using the URL in Step 1.

  • Verify that the popup blocker is disabled if you are using Microsoft Internet Explorer Version 6.0 or later or Mozilla Firefox Version 2.0 or 3.0 browser.

  • Enable the compatibility mode if you are using Microsoft Internet Explorer Version 11.0.
    Tip 

    Add the IP address of the Unified CCX server to the "Compatibility View Settings," to enable the compatibility mode in Microsoft Internet Explorer Version 11.0.

Step 3

On the main Cisco Unified CCX Administration web page, enter your Unified CCX username and password.

Note 

If you are accessing Unified CCX for the first time, enter the Application User credentials specified during installation of the Unified CCX. See the Cisco Unified Contact Center Express Install and Upgrade Guide for further instructions. The user ID is not case sensitive in Unified CCX 9.0(1).

Step 4

Click Login.

A web page opens listing information about Cisco Unified CCX Administration and the Cisco Unified CCX Administration menu bar appears at the top of the page.

Note 
  • For security purposes, Cisco Unified CCX Administration logs you out after 30 minutes of inactivity, and you must log back in.

  • Unified CCX Administration detects web based cross-site request forgery attacks and rejects malicious client requests. It displays the error message, "The attempted action is not allowed because it violates security policies."

  • Avoid using multiple sessions of the Unified CCX Administration at the same time.


Cisco Unified CCX Administration Menu Bar and Menus

The Cisco Unified CCX Administration menu bar appears at the top of every web page of the Unified CCX Administration web interface. You begin every Unified CCX configuration and administration task by choosing a menu and submenu option from the menu bar.

The Cisco Unified CCX Administration menu bar contains the following menu options:

  • System—Contains options for configuring new servers in the cluster, Unified CM information, language information, changing system parameters, custom file configuration, standalone CUIC configuration, and adding or displaying licenses.

  • Applications—Contains options for managing applications, scripts, prompts, grammars, documents, and AAR files.

  • Subsystems—Contains options for configuring parameters for the subsystems that are licensed for your Unified CCX server. Your Subsystems menu may include submenu options for one or more of the following subsystems: Unified CM Telephony, Unified CCX, Database, HTTP, Chat and Email, Cisco Media, MRCP Automatic Speech Recognition (ASR), and MRCP Text-To-Speech (TTS).

  • Wizards—Contains options that provide access to the following wizards of your Unified CCX server: Application and RmCm.

  • Tools—Contains options that allow you to access system tools such as Plug-ins, Real-Time Reporting, Real-Time Snapshot Config. You can also assign access levels to administrators and supervisors and reset passwords.

  • Help—Provides access to online help for Unified CCX.

Cisco Unified CCX Administration Navigation

After you log in, the main Cisco Unified CCX Administration web page appears.


Note

The minimum supported screen resolution specifies 1024 x 768. Devices with lower screen resolutions may not display the applications correctly.


The choices in the drop-down list include the following Cisco Unified CCX Administration applications:

  • Cisco Unified CCX Administration — Uses Cisco Unified CCX Administration to configure system parameters, subsystems, wizards, and much more.

  • Cisco Unified CCX Serviceability — Takes you to the main Cisco Unified CCX Serviceability web page that is used to configure trace files, alarms, and to activate and deactivate services.

  • Cisco Finesse Administration — Uses Cisco Finesse Administration to configure system settings in Cisco Finesse.

  • Cisco Unified Serviceability — Takes you to the main Cisco Unified Serviceability web page that is used to save alarms and traces for troubleshooting, provide alarm message definitions, activate and deactivate services and so on.

  • Cisco Unified OS Administration — Takes you to the main Cisco Unified OS Administration web page, so that you can configure and administer the Cisco Unified Communications platform.

  • Disaster Recovery System — Takes you to the Cisco Disaster Recovery System, a program that provides data backup and restore capabilities for all servers in a Cisco Unified CCX Administration cluster.

You can log in to Cisco Unified CCX Administration either as an administration user or an application user.


Note

An administration user is an end user that is configured on the Unified CM with Administrator capability in Unified CCX.

An application user is an user that is configured during the installation of Unified CCX having administrator capability by default.


If you log in as an Administrator, you can access the following applications that display in the navigation drop-down list in the top right corner of the Administration menu bar:

  • Cisco Unified CCX Administration

  • Cisco Unified CCX Serviceability

  • Cisco Finesse Administrator

If you log in as an application user, you can seamlessly traverse between the Unified CCX web applications as well as the Cisco Unified Serviceability without logging in again.


Note

An application user can log in to these four Unified CCX web applications even when Unified CM is down.


To access these applications from Cisco Unified CCX Administration, you must first choose the desired application from the navigation drop-down list in the upper right corner and click Go.


Note

Cisco Finesse Administration Console opens in a new tab or in a new window based on the browser settings.

To log in to Cisco Finesse Administration, you must be an user with administration privileges.

When the Cisco Tomcat service is down on any of the Unified CCX nodes, you will not be able to launch Cisco Unified CCX Administration from any of the Unified CCX nodes; therefore, you will not be able to launch the Cisco Finesse Administration from within it.

In that case, you can launch the Cisco Finesse Administration directly from the browser.

To launch the Finesse Administration Console, direct your browser to https://FQDN:8445/cfadmin, where FQDN is the fully-qualified domain name of the server.

For more information about Cisco Finesse Administration Console, see Cisco Finesse Administration Console.


You can access the following platform-based web applications using the platform user credentials as configured during installation of Unified CCX:

  • Cisco Unified Operating System Administration

  • Disaster Recovery System

Unified CCX Configuration Web Pages

When you choose any menu and submenu option from the Unified CCX Administration menu bar, a configuration or administration web page opens. Use this web page to continue your configuration or administration task.

In some cases, you will perform your configuration or administration task on this one web page.

In other cases, the web page that first opens when you choose a submenu item leads to a series of web pages. For example, the Unified CM Telephony Call Control Group Configuration web page contains both a tool bar in the top with a few icons that link to other web pages and a configuration area.

The following table describes the Refresh All button and the Copy, Delete, and Refresh icons that are found on several Unified CCX web pages.

Icon/Button

Description

Copy

Click this icon to copy the information in that specific row.

Note 

When you click Copy, the web page displays the copied configuration so you can make changes, if desired.

Delete

Click this icon to delete the information in that specific row.

Refresh

Click this icon to refresh the information in that specific row.

Refresh All

Click this button to refresh the information listed on this page.

Details for Advanced Configuration

In Unified CCX Administration web interface, advanced configuration with Show More and Show Less options exists. On the applicable pages, all configuration details can be displayed or minimised based on user preferences and requirements.

A page by default displays fewer parameters. Parameters configured with default values and not requiring modification or user input are now available in the advanced configuration section. You can access this advanced configuration section by clicking the Show More button at the bottom of the page. When you click this button, the extra parameters become visible and the button changes to Show Less. When you click Show Less, the page reverts to its original list of parameters.


Note

If you are using Unified CCX with Cisco Contact Center Gateway solution, see the Cisco IPCC Gateway Deployment Guide for Cisco Unified ICME/CCE/CCX. The instructions for configuring Unified CCX with that solution differs from what is described in this guide. The Unified Gateway provides for the integration of the Unified ICME system with Unified CCX by way of Unified Gateway. See the Cisco Unified Contact Center Enterprise installation and upgrade guides available at https://www.cisco.com/en/US/products/sw/custcosw/ps1844/prod_installation_guides_list.html for detailed information. The Unified Gateway is a Peripheral Gateway (PG), which you configure on the Unified ICME software.

Toolbar and Buttons

On the top left toolbar of many web pages, you will find an Add New icon and the same Add New will also be displayed as a button at the bottom of the web page.

For example, the Unified CM Telephony Call Control Group Configuration web page contains Add New and Refresh All icons on the top left toolbar and the same are displayed as buttons at the bottom of the web page. When you click the Add New icon or button, another Unified CM Telephony Call Control Group Configuration web page opens. Use this area to add a new Unified CM Telephony Call Control Group.

Many web pages contain icons or buttons that perform a variety of functions. For example, the Refresh All button on the Unified CM Telephony Call Control Group Configuration web page refreshes all the Unified CM Telephony call control group configurations in the Unified CCX server.

A few web pages (for example, Subsystems > Database > Parameters page) also contain a Reset to Default icon and button. This allows you to revert to the software set defaults for each parameter on this page.

Application and RmCm Wizards

In Unified CCX, two wizards are available in the main menu: the Application Wizard and the RmCm Wizard.

To improve the usability and configuration process, these wizards take you through the configuration pages in the required order and help ease the configuration process for these two features. You can access these wizards from a new main menu option called Wizards.